I have been having some problems with my bluetooth just not picking up. Device is Plantronics M3000 and after I rebonded it with the XDA2, is fine. If I then turn off the headset, turn off bluetooth on the XDA and put in standby, leave for 10 mins, finally turn everything back on, the headset is not picking up calls. Bluetooth is set to ON and headset mode is enabled.
Is it possible that an application I have installed is affecting the bluetooth? I performed the ROM Upgrade but can't really remember using bluetooth before now and then, so can't confirm ROM Upgrade isn't responsible.
I will attempt hard reset on sunday, but has anyone else got any suggestions?
I have been using this patch with my Itech R35 headset for a few months now. I noticed when I try to connect in the morning before I go running, it seems like it won't connect with WMP. I turn off BT and turn it on, but nothing seems to work until I do a complete soft reset. This is turning out to be a pain in the ass. Does anyone know an easy way to connect each time? I am also using an Imate Jam. When it is connected, it works great. Please help.
Hi,
I have a Vodafone P3600 which I had unlocked and flashed to test both HTC WM5 and Faman WM6 3.3 and 3.4. I have a problem using it with my Parrot CK3100, and it's the following: devices pair perfectly, but when I leave my car and then return, most of times P3600 does not connect with handsfree. Sometimes, it does connect, but after a long time. This occurs with any OS version I have tested.
A problem with CK3100 is discarded because I have flashed it with latest software version, and it was tested with a HP RW6815.
I tried disabling power saving, setting bluetooth as discoverable, installing Jetware, but nothing made it work as it should.
I'm near to sell my P3600 and buy a new HTC Touch only to solve this problem, because I need much a handsfree working in my car.
Can any of you give a hint of what the problem could be?
Thanks.
I forgot to say that if I power on my HTC, it always connect to the Parrot. But when it's in standby sometimes connects and others no.
I have an SonyEricsson HBH-DS200 and this works unfortunately with the P3600 also in a from you described way. I tryed AWE and PDAVIET and also AX3L ROMs.
Other points and problems with BT HandsFree are:
1.) A litle icon to show that the BT HansFree is connected will be showed in the status only after the first paaring. After that, nothing shows you, that the BT HansFree is connected (and therefor can be used) or not.
2.) After a phone call the BT HandsFree will be disconnected.That meanns, that I can not hear the phone ring in the earpice. I only hear it from the P3600. I have 2 choises after that:
a.) If I push te Answer button on the P3600, the voice is on the P3600.
b.) If I push the Answer button on the BT HansFree then the voice is on the BT HansFree (but it will be disconnected after the call).
3.) The volume can not be changed if I use the BT HandsFree. That means, the volume slide bar can be moved/changed, but this has no effect to the volume in the BT HansFree.
In my opinion if the paaring is done and the BT HandsFree is switched on it should be always:
- connected
- an icon in the status line appear
- the voice in the BT HandsFree - independent if the answer button is pushed on the phone or on the BT HandsFree
For me is the BT HandsFree very imortant, and I am a litle bit disappointed, that a device for 500 Eur works that buggy with a technology that is almost 10 year old.
Using the Touch HD with a builtin bluetooth car kit. Everything works fine, the phone's contact list displays on the screen of the car. The pairing went fine. Call history works. Happy me. But occasionally i notice after making a call via the car (after hangup) the connection disappears and i check the phone. Bluetooth is switched off!!! How can this be? Are there any settings i have missed?
Any other users experience this?
same here with my bt handsfree
what if you connect it to powersupply ?
with power : working
without power : after some minutes off
sometimes I can not access the contactlist, stop the car, remove the key, start again and it works
There is something wrong with BT + car
I've had my HD a couple of days and use it with the built in BT in my Audi. The car displayed "telephone is not connected" and when I checked the phone, no BT icon. I've had problems in the past with other makes not working very well like this and was thinking it was going to be the same here... As I was getting annoyed a call came in, rang for about half a ring on the phone then it reconnected to the car and continued ringing there, answered the call just fine.
Since then it's done the same thing twice, I'd prefer it didn't but it hasn't actually caused a problem yet.
BT shuts off by itself.
I seem to be having the same problem in my Audi Q7. It does not make a difference weather to be connected to a power supply or not.
Im having the same issue here, in my A4 Cab with integrated UHV 0420
Strange thing is, it doesnt disconnect from my works Parrott kit.
It does turn off the Bluetooth on the phone, strange. It didnt happen for the first week though.
Any ideas?
Bloke
same here. having problems with my Land Rover LR2. first week, there were no problems. now, the phone doesn't automatically connect when i start the car, i have t manually connect it by pressing the phone button on my dashboard. it then connects with no problem. however, when i try to place a call, it automatically disconnects the bluetooth.
not sure if this is a problem with the htc or my car; i have to try another phone with the car first.
Same happens in my Lamboughini and also my Mercedes- Benz E Class.
Looks like I'll just have to stick with my roller from now on!!!!
I see I'm not the only one with this problem. Soooo...... anyone got a fix?
Please, at least have you checked for a few seconds after the disconnect to see what happened ??
Well, I have a BMW S1 with in-car bluetooth. I previously owned an S200, SE K800i and a Touch Pro and never got any problems with those phones.
With HD Touch I also have the same problems like you people, but 2 or 3 seconds later the BMW regain the connection with my HD.
So, for me this is no big deal. If this only happens to me, then I'm the first to apologize my introduction on this post, if not... lol
Im sure its not related, but I installed the hotfix for the TF3d earlier and I didnt have any disconnects on the way home....... ????? Go HTC.....
Bloke
yesterday i installed the hotfix from htc, but today i lost bluetooth connection again in the car. The bluetooth in the car keeps functioning, but the bluetooth on the HD has deactivated itself! With my previous sony ericsson phone (also bluetoot 2.0) i didn't have this problem. So i think it's related to the bluetoothsoftware on the HD.
bloke said:
Im sure its not related, but I installed the hotfix for the TF3d earlier and I didnt have any disconnects on the way home....... ????? Go HTC.....
Bloke
Click to expand...
Click to collapse
I spoke too soon, it disconnected this morning and didnt reconnect....
Bloke
Have a look at this thread - also bluetooth problems with pairing issues - looks like BT maybe bugged
http://forum.xda-developers.com/showthread.php?t=442987&highlight=bluetooth+problems
Hello,
I have the same problem. I can not really use bluetooth in my car, because the Touch HD ends the connection after a few minutes (most times after less than five minutes).
Without a connection to the car, bluetooth will not be ended by the Touch HD, so it seems to be a problem of a connection to a bluetooth headset or a problem of a connection only to a car bluetooth "headset".
Regards
Thomas
Does this only apply to original built-in bluetooth kits and not after-market kits?
My BT-radio does not have problems with the Touch HD, but it is an after-market radio.
Same problem here. My connections drops also. I drive an Opel Zafira with builtin bluetooth carkit. Bluetooth is turned off after a while.
I've noticed when i start the car a connection is made and a few seconds later bluetooth is turned off and immediatly turned on again. After it's turned on, the connection is stable for a while. A few moments later it turns off again. Then i have turn the bluetooth connection manually.
Today i had a phone confercation for a half hour. The connection stayed stable. When i hang up the phone, the connection dropped .
Can the synchronisation of the phonebook be the problem? I had this problem with my p3600. After installing Jetware, the problem was solved. I've installed Jetware on my HD, but with no luck .
Is there a way to log the bluetooth communication. May be it tell us more
Indeed the HD bluetooth seems to be poor, I also experienced bluetooth switching off by it self when trying to pair with my Motorola S9 headphones, I have the hotfix installed, before I didn't notice this bluetooth behavior.
Also when exiting Opera the phone hangs, not always but sometimes
Anyone solved the problem yet
I send a email to HTC support. Hopefully they can help. If they answer......word goes arround that htc support sucks
still don't have a solution.........
I have a jade working with a BT110 it answers the call fine but after the call the headset apears to turn off which it is supposed to do but the phone thinks that it is still connected so you have to turn soft reset the phone before you can make/recive a call and hear it via the handset.
has anyone else had this problem or could it possibly be the headset rather than the phone?
Tom
paperclip69 said:
I have a jade working with a BT110 it answers the call fine but after the call the headset apears to turn off which it is supposed to do but the phone thinks that it is still connected so you have to turn soft reset the phone before you can make/recive a call and hear it via the handset. has anyone else had this problem or could it possibly be the headset rather than the phone?
Tom
Click to expand...
Click to collapse
My experience - I use Jabra BT. The BT does not switch off after call is disconnected, until you switch it off. And the phone always thinks that BT is on (even when the BT set is switched off) until BT is disabled using the comm function.
I tried another Jabra headset last night, and although slightly better behaved it still didn't release the phone when turned off?
does anyone use a BT headset with the jade that works properly? what are peoples experiances.
anyone know what it is about the jade that makes it not work right?