I have been having some problems with my bluetooth just not picking up. Device is Plantronics M3000 and after I rebonded it with the XDA2, is fine. If I then turn off the headset, turn off bluetooth on the XDA and put in standby, leave for 10 mins, finally turn everything back on, the headset is not picking up calls. Bluetooth is set to ON and headset mode is enabled.
Is it possible that an application I have installed is affecting the bluetooth? I performed the ROM Upgrade but can't really remember using bluetooth before now and then, so can't confirm ROM Upgrade isn't responsible.
I will attempt hard reset on sunday, but has anyone else got any suggestions?
Related
I am using QTek 2020 with Jabra Freespeak 250 bluetooth headset (I am not sure if this is relevant). I have just noticed that my device is no longer turning off by itself when running of battery power as specified in the settings. Does having the bluetooth mean that it can't turn off by itself?
same problem
I am using a Bluespoon digital, and have the same problem. However I don't know if it has anything to do with it since my device has so many problems.
Hi,
I´m using a Qtek2020 with the Jabra250.
I have some times the problem with the device not turning of.
I have tried this and it works for me:
1-Close Bluetooth
2-Change turn of device time to a diferennt time. If you have 3 minutes change to 2 or 4.
3-Wait until the device turns of.
4-Turn the device on with power
5-Activate Bluetooth headset.
After I have done this the device turns of again.
Hope it will works for you both.
Regards
Josef
I have been using this patch with my Itech R35 headset for a few months now. I noticed when I try to connect in the morning before I go running, it seems like it won't connect with WMP. I turn off BT and turn it on, but nothing seems to work until I do a complete soft reset. This is turning out to be a pain in the ass. Does anyone know an easy way to connect each time? I am also using an Imate Jam. When it is connected, it works great. Please help.
I finally managed to get my titan fully flashed and working properly with one exception....anytime I turn my bluetooth headset off I have to go back into the bluetooth settings on my phone and reinstall my bluetooth. It seems that for some reason whenever I shut the bluetooth headset off it or the phone iteslf decides that it is no longer needed and removes it from the phone.
Anyone have any ideas on this?
Thanks
I have a jade working with a BT110 it answers the call fine but after the call the headset apears to turn off which it is supposed to do but the phone thinks that it is still connected so you have to turn soft reset the phone before you can make/recive a call and hear it via the handset.
has anyone else had this problem or could it possibly be the headset rather than the phone?
Tom
paperclip69 said:
I have a jade working with a BT110 it answers the call fine but after the call the headset apears to turn off which it is supposed to do but the phone thinks that it is still connected so you have to turn soft reset the phone before you can make/recive a call and hear it via the handset. has anyone else had this problem or could it possibly be the headset rather than the phone?
Tom
Click to expand...
Click to collapse
My experience - I use Jabra BT. The BT does not switch off after call is disconnected, until you switch it off. And the phone always thinks that BT is on (even when the BT set is switched off) until BT is disabled using the comm function.
I tried another Jabra headset last night, and although slightly better behaved it still didn't release the phone when turned off?
does anyone use a BT headset with the jade that works properly? what are peoples experiances.
anyone know what it is about the jade that makes it not work right?
Hi,
Just got G4+ unlocked for US. When pair with Bluetooth headset, the "phone" option would only work once. If I turn BT off and then back on, I can only use "media" option to pair. "Phone" option would not stay checked. Voice calls go to phone speaker. This can be fixed by soft reset or putting the phone in airplane mode and then back on. Again, only works once until BT is turned off. After the first time, all voice calls go thru phone speaker again. I have BT sets in the car and at home, but at home usually use the phone speaker, so I turn BT off once get home. Never had this issue with multiple other phones. Phone still connects automatically to the BT when I get into the car, but cannot route voice calls thru the BT.
Tried to unpair/delete device, empty cache... No luck. Only works once until BT is turned off.
Very frustrating. Phone is on stock 6.0.1 on TMo, not rooted.
Any ideas. Saw a few other posts with same issues out there but no solutions.
Thanks much.