Related
I am having difficulties connecting the Jasjar with my GPS TELETYPE on BT.
The com ports are really confusing me. I am using Destinator 3, and after I have paired the GPS device, and have selected a serial port connection, Destinator can’t find a GPS receiver.
Have anyone successfully connect a BT GPS with Jasjar?
geovass said:
I am having difficulties connecting the Jasjar with my GPS TELETYPE on BT.
The com ports are really confusing me. I am using Destinator 3, and after I have paired the GPS device, and have selected a serial port connection, Destinator can’t find a GPS receiver.
Have anyone successfully connect a BT GPS with Jasjar?
Click to expand...
Click to collapse
Hi, geovass.
Did you see the prompt that the device supports Serial Port Profile? If not did you try to delete the paired GPS and try to re-pair again?
ssarl
ssarl said:
geovass said:
I am having difficulties connecting the Jasjar with my GPS TELETYPE on BT.
The com ports are really confusing me. I am using Destinator 3, and after I have paired the GPS device, and have selected a serial port connection, Destinator can’t find a GPS receiver.
Have anyone successfully connect a BT GPS with Jasjar?
Click to expand...
Click to collapse
Hi, geovass.
Did you see the prompt that the device supports Serial Port Profile? If not did you try to delete the paired GPS and try to re-pair again?
ssarl
Click to expand...
Click to collapse
I have done the pairing twice already. No, i dont get a prompt that the device supports Serial Port Profile.
I've got it working.....
First you've got to pair your GPS.
Then go to the "COM" tab in the bluetooth manager
Add a new outgoing port with the GPS as device
Then install you're navigation software !!!
It works fine in combination with the Jasjar, Emtac GPS and TomTom Navigator 5.1
rob_van_triet said:
I've got it working.....
First you've got to pair your GPS.
Then go to the "COM" tab in the bluetooth manager
Add a new outgoing port with the GPS as device
Then install you're navigation software !!!
It works fine in combination with the Jasjar, Emtac GPS and TomTom Navigator 5.1
Click to expand...
Click to collapse
On the outgoing port, which com should i add?
Choose one butt be sure you choose a free one and later choose the same on in your navigation software :lol:
rob_van_triet said:
Choose one butt be sure you choose a free one and later choose the same on in your navigation software :lol:
Click to expand...
Click to collapse
I have done what you've describe, without installing the GPS SW (destinator) second. Do you think this is the case.
I can never match the com ports i use on the outgoing port and on the Navigaton software. The ports cant be the same...
It seems that i cant select any com ports on the outgoing port except from port0 and port8.
If i select one of those 2, i dont see them in Destinator's GPS settings tab.
Just used a hex editor to change the port manualy in Destinator.ini and it worked like charm !
I have the same issue. I can only connect com 0, 4 or 8 to my Emtac but TomTom5 only shows 6 and 7...
Anyboby who can help?
paulrousseau said:
I have the same issue. I can only connect com 0, 4 or 8 to my Emtac but TomTom5 only shows 6 and 7...
Anyboby who can help?
Click to expand...
Click to collapse
same problem here with TT5
paulrousseau said:
I have the same issue. I can only connect com 0, 4 or 8 to my Emtac but TomTom5 only shows 6 and 7...
Anyboby who can help?
Click to expand...
Click to collapse
Me too have had the universal for a week now tried reg hacks utils etc cant get it to use com 0 4 8 evean if enable wm2005 GPS to remap ports ...
same port with bluetooth com ports for syncing
I have encountered the same problem as u, but while trying to get bluetooth connection to sync with PC... so far no luck...
I know the trick is to select COM5 for the Outgoing Port in your GPS, and then, somehow, make TT5 show the COM5. In order to do that, some hacking must be done at the registry which I have no idea how to do that.
BT GPS with another GPS software
Hi,
Anyone using TomTom5 with BT Gps Have tried another gps software?
Close TomTom and tried to connect to the new software serial port and sucedd?
Let me know how you have done.
Regards
JoseF
Hi there..
I have recently brought an xda exec and the new leadtek GPS 9553 receiver.. When i try to connect to it, i cant.. It pairs up and i have a partnership between to two but it does not connect.. I have installed the leadtek navigation software and that boots up fine but the receiver jus wont connect.. I have been tryin to get this to work for 2 days now and i have made no progress.. =(
ANY help is much appreciated..
Thanks for your time and effort in advance. =)
Note..
On the xda i can only use:
COM0
COM4
COM8
All the others 'cannot be opened'.
On the leadtek navigation it tries to connect on either:
COM1 Serial_dbg
COM2 Serial_FIR
COM3 IrCOMM
COM6 Serial
COM7 Serial_BTU
COM9 QCTComposi
Plus.. When using tomtom, that only has:
QCT Data Interface
RIL on COM6:
COM7:
Serial Cable on COM1
Infrared Port
Ir on COM3:
Again.. Many thanks in Advance..
I have a slightly older model of the same bluetooth GPS as you (Leadtek 9537) - and can confirm that it works great with TomTom 5.10 on mine.
There is a long thread in this very forum about getting TomTom to 'see' bluetooth GPS receivers in Windows Mobile 5, I just followed the instructions in that thread and it worked a treat.
I have looked thru the forum about this topic and i have found a lot of useful information.. only problem is.. its the reciever and xda that i am findin hard to connect with each other not with tom tom..
Do you get the message "serial port device" etc and answer yes to the prompt?
Yeps.. i select the serial port check box and then the options on that are on screen are cancel, save and refresh.. so i press on save..
thats the end of it.. =S a partnership is created but no connection????
selectt the comport com 8 then save the settings
COM port 8 selected for new outgoing port.. nothings changed.. then i...
Hi
I Got O2 Xda Wm 2003,tomtom 5,bt 77 Gps The Problem Is:
I Cant Stablished Contact With A Gps Cos I Got No Port
On Pda Bluetooth Setting.
On The Pda Setting I Got>bluetooth Setting>mode>on>off>
Discoverable ( No Ports As Com 2,6,9...)
And On Tomtom Gps Setting I Got,
Gps Is Connected To:
Infrared Port
Bt On Com6
Serial Cable On Com1
Com9
Com2
Serial On Usb.
How To Add Com Ports In My Pda
Tnx For Your Help
ITS WORKING 100%
I GO IT WORK
Hi,
I have the same problem - no virtual COM port - how did you make it ?
I tried every setting in TOM-TOM and nothing changed. Please help me.
TOMTOM AND GPS
The XDA II comes only with support for BT headsets and ActiveSync through BT. The serial port emulation is also a feature of the Microsoft BT stack but you need a device driver a register port and to handle it
AND ITSOCKET BLUETOOTH TOOLS
hi
i have the latest rom for my xda but i cannot get my bluetooth gps receiver to be seen , it will bond but it does not seem to find the com port , i have a holux 236 and i am running gps viewer:confused which scans the com ports , it used to find it but since a reboot it will no longer do so.
i have tried wm5gpsfix but it seemed not to do anything.
anyone any ideas
cheers
martin bell
[email protected]
I had the same problem but with WM 2003. Instalation of Widcomm Bluetooth Stack maked my GPS receiver visible for TomTom application. try that!
Hi guys, i installed tomtom 7 on my xda mini s and bought a HOLOX bluetooth gps reciever. I paired my xda and gps and ticked the serial port. It would not allow me to create a com port for this device (cant create a com port for any device) It shows COM6 and COM7 but i get the error ' the com port could not be created, please check your settings and try again'. When i open tomtom and try to find the gps on the serial port it doesnt work. The thing is, when i pair it connects to pair then disconnects and i dont know how to connect them again, this bluetooth stack is rubbish in my opinion and i cant find a replacement.
Any help/suggestions would be appreciated
Thanks
hooking the holux
I have a holux and same device.
the only thing you need to know is which virtual COM is the holux device using.
You will be giving this info when you pair the holux (bluetooth).
Fairly simple (at least in my case)
Resolved
Hi, thanks for your post.
I resolved this matter by installing the widcomm bt stack and changing certain registry settings.
It now connects when i switch the holux device on.
Thanks again people
GazzehGNET said:
Hi, thanks for your post.
I resolved this matter by installing the widcomm bt stack and changing certain registry settings.
It now connects when i switch the holux device on.
Thanks again people
Click to expand...
Click to collapse
Hi,
i'm tried to install the widcomm bt stack (v.1.7 test and BroadcomBluetoothStackX51V05).
In both times the volume of the wizard become much down and i't impossible to listen somethings.
The ringtone dont'worls and any file (avi or mp3) dont' listen.
have you fix??
What version have you installed??
Thx
Dansen
Solution for "The COM port could not be created. Please check your settings and try again" in http://yopablo.blogspot.es/