Related
I am having difficulties connecting the Jasjar with my GPS TELETYPE on BT.
The com ports are really confusing me. I am using Destinator 3, and after I have paired the GPS device, and have selected a serial port connection, Destinator can’t find a GPS receiver.
Have anyone successfully connect a BT GPS with Jasjar?
geovass said:
I am having difficulties connecting the Jasjar with my GPS TELETYPE on BT.
The com ports are really confusing me. I am using Destinator 3, and after I have paired the GPS device, and have selected a serial port connection, Destinator can’t find a GPS receiver.
Have anyone successfully connect a BT GPS with Jasjar?
Click to expand...
Click to collapse
Hi, geovass.
Did you see the prompt that the device supports Serial Port Profile? If not did you try to delete the paired GPS and try to re-pair again?
ssarl
ssarl said:
geovass said:
I am having difficulties connecting the Jasjar with my GPS TELETYPE on BT.
The com ports are really confusing me. I am using Destinator 3, and after I have paired the GPS device, and have selected a serial port connection, Destinator can’t find a GPS receiver.
Have anyone successfully connect a BT GPS with Jasjar?
Click to expand...
Click to collapse
Hi, geovass.
Did you see the prompt that the device supports Serial Port Profile? If not did you try to delete the paired GPS and try to re-pair again?
ssarl
Click to expand...
Click to collapse
I have done the pairing twice already. No, i dont get a prompt that the device supports Serial Port Profile.
I've got it working.....
First you've got to pair your GPS.
Then go to the "COM" tab in the bluetooth manager
Add a new outgoing port with the GPS as device
Then install you're navigation software !!!
It works fine in combination with the Jasjar, Emtac GPS and TomTom Navigator 5.1
rob_van_triet said:
I've got it working.....
First you've got to pair your GPS.
Then go to the "COM" tab in the bluetooth manager
Add a new outgoing port with the GPS as device
Then install you're navigation software !!!
It works fine in combination with the Jasjar, Emtac GPS and TomTom Navigator 5.1
Click to expand...
Click to collapse
On the outgoing port, which com should i add?
Choose one butt be sure you choose a free one and later choose the same on in your navigation software :lol:
rob_van_triet said:
Choose one butt be sure you choose a free one and later choose the same on in your navigation software :lol:
Click to expand...
Click to collapse
I have done what you've describe, without installing the GPS SW (destinator) second. Do you think this is the case.
I can never match the com ports i use on the outgoing port and on the Navigaton software. The ports cant be the same...
It seems that i cant select any com ports on the outgoing port except from port0 and port8.
If i select one of those 2, i dont see them in Destinator's GPS settings tab.
Just used a hex editor to change the port manualy in Destinator.ini and it worked like charm !
I have the same issue. I can only connect com 0, 4 or 8 to my Emtac but TomTom5 only shows 6 and 7...
Anyboby who can help?
paulrousseau said:
I have the same issue. I can only connect com 0, 4 or 8 to my Emtac but TomTom5 only shows 6 and 7...
Anyboby who can help?
Click to expand...
Click to collapse
same problem here with TT5
paulrousseau said:
I have the same issue. I can only connect com 0, 4 or 8 to my Emtac but TomTom5 only shows 6 and 7...
Anyboby who can help?
Click to expand...
Click to collapse
Me too have had the universal for a week now tried reg hacks utils etc cant get it to use com 0 4 8 evean if enable wm2005 GPS to remap ports ...
same port with bluetooth com ports for syncing
I have encountered the same problem as u, but while trying to get bluetooth connection to sync with PC... so far no luck...
I know the trick is to select COM5 for the Outgoing Port in your GPS, and then, somehow, make TT5 show the COM5. In order to do that, some hacking must be done at the registry which I have no idea how to do that.
BT GPS with another GPS software
Hi,
Anyone using TomTom5 with BT Gps Have tried another gps software?
Close TomTom and tried to connect to the new software serial port and sucedd?
Let me know how you have done.
Regards
JoseF
HI all!this is my first post on the forum and i am glad to be here!
the problem is i cannot connect the holux 236 to the s100 or magician.
rom version is 1.12.00WWE.I tried pocket bluetooth tools but no luck.
the gps viewer gets nothing and also the destinator pn shows that no gps is available...
please help in any way...a walkthrough would be welcome since i am a newbie with ppc...
thanks in advance and keep up the good work!!
Hi, have you had any success with any other gps reciever opr is this the first one you try?
Suppose you have tries to enter the sw program and then configure the reciever with your magician? Is this where the trouble is?
this is the first one to use.
s100 gives com 5 to the gps but still no luck with ddestinator.states that no gps is present.
maybe a bluetooth stack problem?
could use all the help i can get..............
Ive just ordered a Holux 236 from Fleabay, should be here in a few days, will post my settings if I get it working ok
is the holux 236gps mini actually compatible with the QTEK S100??????????
Hi
Switch on Bluetooth and Pair the device using pass key 0000
Then DO NOT connect the device
Enter GPS Viewer 1.5 and select (Bluetooth) COM Port 6 (may be something else on your device). Select Open GPS and you should start getting data...
Hope that helps
The whole problem is that I cannot get my Qtek 9100 to show the spp slave service. This seems to be a qtek problem because none of my other BT devices will show it either. They showed fine with my old HP 6365. :?
I am not sure in that case... I cannot remember but does it use Widcomm Stack or M$?
I'm not sure what stack they use. I don't think it's Widcomm, because my HP BT keyboard won't connect and the reason is that it says there is no Widcomm stack. Go figure.
if thats the case,how do we solve it?third party software?change bluetooth stack?and if yes how.........?and i thought it would be plug n play...
OK, I have this BT receiver, works perfectly with my mini. Have you added any bluetooth stacks in addition the default ? When you search for devices does the Bt find the Holux? Is it switched on and charged? Don't know how new you are to bluetooth devices, but bear in Mind that a brand new Bt device out of the box may take up to 30 minutes to get a fix for the first time.
no new stacks added,device is charged.
gps pairs with s100,asks if it should create a port,i reply yes and i press finish.in the bluetooth menu at the com ports i press new outgoing port and i am asked to choose a device.i select holux,press next and nothing happens....so whats the deal here?in the bluetooth serial port setup i check the outbound com port:com 5 beforehand.so please tell me what am i doing wrong this time....is there something i didnt do or something i did...?
Ok, so the pairing came up fine. Thats one thing out of the way.
Now, forget selecting outgoing or incoming ports, its completely useless, doesn't work. I have TOMTOM and have selected "Other Bluetooth Device" and selected COM5, it works fine. Could be your com port is being occupied by other bluetooth such as Activesync.
Delete all paired devices, Go to Start, Settings, Bluetooth Setting and check that "Outbound COM port: COM5" is ticked only, click OK then try pairing your Holux and try again. It does work with the mini, I promise!!
I got a 236 slim and no problem with MS BT stack.
try to connect as explained by moghisi101, it should work
WELL i did try,trust me!at what point should the orange led light up???it should first communicate with the gps viewer and then start blinking or something?cause so far the orange led has not shown its colors........is this normal or do i have a faulty gps?????????????
Hmmm sounds like a faulty unit. Ive had my 236 for a couple of days now and it worked first time with Tomtom, just selected 'Other device' and 'Com5'
Im really impressed by this unit, even gets 5-6 satellites indoors !
When you turn the unit on the orange LED should be on all the time (searching) then after about 45 secs it should start to flash indicating that it has locked onto satellites. If you arent getting any light from the orange LED it does suggest a faulty unit
HTH
Dear Htc fellows,
My bluetooth GPS is working strange on my Universal, but on iPaq with
WM2003 works as a charm. The BT GPS is new Solar GPS with new Mediatek
chipset.
It's not working with iGo 2006 and even not Tomtom 5 or Tomtom 6.
I can find the BT GPS in BT manager, I can pair it, but I dont know why,
it needs a pass key even if it shouldn't. Then when I explore it's
services, The popup come again asking me if I will allow external BT
device to connect to my Universal and it come asking passkey again (Why?).
I can't even enter an empty passkey (bt device doesen't require it). After that I have successfully paired the device. I can add it's serial port to enumerate on com ports 8 or 4.
When I start Tomtom, it doesent detect the device at all. If I use iGo, it detects, gets datas and disappear, it's allways appeared for 1 second and then 5 seconds not. No matter Which bitrate I set (device is written to be 9600) it needs to be in NMEA protocol, not SIRF.
When I use some freeware GPS programs, it seams to be working ok, it shows satelites and it's not disappearing.
What can I do with that???
I have some idea that it's probably about WM5 and it's security....
How can I setup com security in registry? can I set the port speads manually atd... I had performed a hard reset and it still don't work. Can ROM update or AKU update help me?
Does anyone have some idea what should I try now?
O2 XDA EXEC:
Rom: 1.30.107
Radio:1.09.00
P:42.42.P8
BT GPS: model: BT 2.5MR
made by f-tech.com.tw
Thanks;
Shef
Could you find a solution??
Hi,
I have the same problem exactly and could not find anything on the net. Did you solve your problem?
well ...
i know that there is a problem with GPS and WM5 and so there is this patch which i install every time i hard reset .....
the guys i bought MY GPS from gave me this ... and they are pretty knowledgable .....
it works well ....
try it !
tried
My OS version is WM2003 but tried anyway.. Did not work.. can there be version for WM2003??
did you ?
did you define an outgoing com port for the device (com 4 for example ?)
com port definition
well, igo finds the device an COM 6 actually, it connects too.. but stays connected just for a second, then again and again..
I installed GPSGate and created a virtual com port 7. I manually configured the GPS receiver connection to COM 7 on igo.. But all the same.. :
do you advice another way?
one other thing the device works with navigon 5.0 and tomtom 6.0 smoothly, no problem.. only igo..
well...
IGO is CRAP ... that is well known .... lots of bugs ...
i am sorry .. i do not know how to solve your problem...
but i suggest using destinator 6 ..... (that's what i use) ....
simple ... nice looking .... big buttons and able to navigate to your contacts directly (especially useful if you have Phone Edition)
oh ... and ... works great !
I got the Holux GPSlim 236 GPS. I can pair the GPS with Universial. But I cannot set the com port at all. A pop up window always say the com port (I tried everyone of the ports) is not available.
Any one got a solution, does the GPS bug fix help ? and what does it fix ?
Might seem a bit obvious, but have you tried the code "0000" when pairing your device?
Once paired...did you define an outgoing serial port on "Bluetooth Settings" menu on your WinCE?
I have a royaltek bluetooth GPS and it's been working well with TomTom[5|6]...I use '0000' as passkey (default on many 'non-interactive' devices), once paired I clicked on 'COM Ports' tab and defined a new outgoing port, the wizard should list the GPS as an available device to create a COM port so I used it and I got a 'com0'.
Once the outgoing port was created I had to tell TomTom to use the new 'com0' and worked like a charm
It's been working since TomTom 5.21 (previous versions didn't work).
Hi,
I seem to be having a problem with GPS bluetooth related connections with my Dopod 838 Pro.
Ive paired my Globalsat BT338 receiver and setup an outgoing serial port on my Dopod, and I can use Destinator 6 and TomTom 6 fine (for the time being).
The next day/time when I try to start the GPS applications, both programs report that they cant find the GPS signal/receiver even though its been correctly configured to work previously.
I then have to enter the Bluetooth settings to change and assign another outgoing serial port and reconfigure the GPS applications to the new serial port to work.
The programs and the GPS receiver worked fine with my old iPAQ hx4700 so its not a receiver or program issue.
I'm at my wits end and would appreciate any info on solving this problem.
Thanks in advance.
Delete / unpair your GPS
Make a new pair, and when you assign an outgoing COM port, use a NON secure COM port.
(Deselect the checkbox)
This should work
Rik_053 said:
Delete / unpair your GPS
Make a new pair, and when you assign an outgoing COM port, use a NON secure COM port.
(Deselect the checkbox)
This should work
Click to expand...
Click to collapse
Hi,
Ive been through this unpair / pair scenario more than a few times and Ive never used a secure com port connection.
try destinator PN 6
also make sure you pair BEFORE starting Destinator PN; I spent a whole two days before I Got this to work ... then once it worked .. the answer was actually quite logical
sorry cant remember how i did it as it was months ago when I got and paired my tytn; now I use destinator pn 6
njay22 said:
try destinator PN 6
also make sure you pair BEFORE starting Destinator PN; I spent a whole two days before I Got this to work ... then once it worked .. the answer was actually quite logical
sorry cant remember how i did it as it was months ago when I got and paired my tytn; now I use destinator pn 6
Click to expand...
Click to collapse
Hi,
The pairing has been done before any program was launched.
Im trying with both destinator 6 and tomtom 6
Bluetooth GPS Woes...
Is it the Bluetooth connection you are having problems with or getting a GPS signal. I have this exact setup working fine. What I notice is that often it will take a few minutes for the BT-338 to find enough satellites to provide a GPS signal (green light flashing). The bluetooth should connect immediately regardless of whether the GPS signal is available yet. The blue light on the BT-338 should flash twice as fast as when you first turn it on to tell you that it is connected to a Bluetooth device.
I am using TomTom 6 and it will say no GPS signal or GPS signal lost XX seconds ago. Is this similar to what you are noticing?
clearwave1 said:
Is it the Bluetooth connection you are having problems with or getting a GPS signal. I have this exact setup working fine. What I notice is that often it will take a few minutes for the BT-338 to find enough satellites to provide a GPS signal (green light flashing). The bluetooth should connect immediately regardless of whether the GPS signal is available yet. The blue light on the BT-338 should flash twice as fast as when you first turn it on to tell you that it is connected to a Bluetooth device.
I am using TomTom 6 and it will say no GPS signal or GPS signal lost XX seconds ago. Is this similar to what you are noticing?
Click to expand...
Click to collapse
Hi,
Both the bluetooth reciever and the software work fine and obtain a fix.
the next time the software is started it cant find the reciver and i have to unpair, repair and set a new comm port for it to work.
the gps reciver obtains a fix but the pda cant see it.
Destinator PN has an automatic reconnect tick box on the GPS Settings page. I don't know if D6 or TT have a similar thing. If so, make sure this box is ticked.
I use D PN with a Parrot CK3300 combined handsfree and GPS receiver, and after major stuffing around trying to get D PN set to the correct port initially, it has worked fine since.
Ive sorted the issue out and hopefully this will help others experiencing the same problem.
The problem was that although an outgoing serial port was setup, for some reason it was not mapped to the bluetooth device.
It just specified "COM9" instead of having the bluetooth device "BT338(COM9)" under the bluetooth COM Ports setting.
This seems to be the reason why when the device was unpaired/paired and a com port setup it worked for the time being. After the bluetooth device was disconnected the settings mapping to the device were not retained.
Rambler76,
I am looking to get a GPS unit for my Dopod 838Pro. Which of the two, Destinator or Tom Tom, do you like best?
I know where to get Destinator 6 in Sydney, where does one get Tom Tom 6?
Rambler76 said:
Hi,
the next time the software is started it cant find the reciver and i have to unpair, repair and set a new comm port for it to work.
QUOTE]
Can I ask, with a new com port being asssigned each time you have a problem, when you run out of ports what happens?
Are you able to regain the use of these once assigned ports ? by resetting any settings ?
Does this make any sense?
Thanks for any input ..
Click to expand...
Click to collapse
killabeezz said:
Rambler76 said:
Hi,
the next time the software is started it cant find the reciver and i have to unpair, repair and set a new comm port for it to work.
QUOTE]
Can I ask, with a new com port being asssigned each time you have a problem, when you run out of ports what happens?
Are you able to regain the use of these once assigned ports ? by resetting any settings ?
Does this make any sense?
Thanks for any input ..
Click to expand...
Click to collapse
hi,
what i mean to say is that i switch com ports.
the issue was resolved by mapping the com port to the bluetooth device.
Click to expand...
Click to collapse
Yes I understand what you have done but can I ask again :-
Are you able to regain the use of these once assigned ports ? by resetting any settings ?
Thanks,,
Tom Tom Woes
Hi,
I had the same problem until recently.
To fix I did the following:
Delete pair with GPS receiver,
Create new pair with GPS receiver (put in passkey 0000)
Tick the box for Serial Port
The in Bluetooth Settings -> COM Ports tab, I clicked 'New Outgoing Port'
Selected the GPS unit, and selected Port 4 and unticked the 'Secure' checkbox
Now open TomTom, Select Change Preferences, then Show GPS Status, then Configure, then Other Bluetooth Receiver, then Select COM 4.
Now TT works as it should - turning on and off Bluetooth on Open/Close, and no problems with needing to re-pair.
Previously I had always paired the BT GPS on COM 0 with Secure ticked. This worked the first time only, and I had to re-create the same pair each time I wanted to run the app.
Hope this helps some of you.
(btw I was using TT6 when I found the solution, but I imagine it would have worked for 5 too)
dopod bluetooth problems
Guys I have the same problem with my bluetooth and my dopod. It connects then disconnects.
I have also noticed that the systems unchecks the turn on bluetooth check box and the make this device discoverable to other devices.
Does anyone have any ideas?
Guys I just read this at another forum.
"The Dopod 838 pro and WM5 have chronic problems with the bluetooth stack, which is why everyone is waiting for the new ROM to appear, which will hopefully be WM6. HTC (manufacturers of Dopod 838 pro) announced that the new ROM will fix all of the known problems"
This I learn after having a car accident (minor) in my car playing with the bluetooth and trying to get it to work. Hutchison 3g should only be selling these with a warning.
I assume there is also a problem with the JasJam as they are the same phone.
Knight__Mayor said:
Hi,
To fix I did the following:
The in Bluetooth Settings -> COM Ports tab, I clicked 'New Outgoing Port'
Selected the GPS unit, and selected Port 4 and unticked the 'Secure' checkbox
Click to expand...
Click to collapse
Have to concur with Knight_Mayor. Was having trouble getting a signal/satellite fix using a Holux GPSlim236. Then I set it to COM9 with the "Secure" box unchecked. I had barely closed the window and my M3100 had a fix from inside my house! (tomtom 6 had been running in the background whilst the adjustments were being made)
dabs1 said:
Have to concur with Knight_Mayor. Was having trouble getting a signal/satellite fix using a Holux GPSlim236. Then I set it to COM9 with the "Secure" box unchecked. I had barely closed the window and my M3100 had a fix from inside my house! (tomtom 6 had been running in the background whilst the adjustments were being made)
Click to expand...
Click to collapse
yeah i recon its the screwy MS bluetooth stack, im interested to hear from anyone running tomtom on hermes with the widcomm bluetooth
Tomtom And Gps
I have found that the best cure for gps woes and pocket pc is to use GPS Gate. It make a virtual com port and will always be the same. I have used it always and never have problems connecting.
G
Does anybody know how to get the XDA EXEC to work with BT GPS
FGPXBT02 as I am really struggling to get this device to work. My phone can see the device in bluetooth but when I run TomTom 5 on the phone the program cannot see the GPS device in the "OTHER BLUETOOTH RECEIVERS" section
Any ideas?
create a outgoing com(0-10) port unsecured
then select that com port in your tomtom by selecting different GPS receiver
Scouse - please modify topic title to give more helpful info...
V
Viper® said:
create a outgoing com(0-10) port unsecured
then select that com port in your tomtom by selecting different GPS receiver
Click to expand...
Click to collapse
hi viper thanks for info tried that but the tomtom software does not see com0 in the other bluetooth receiver section. this is the problem i am having.
Don't use "Other Bluetooth", use "Other Wired GPS receiver" and select the com port there. I think if you select a Bluetooth GPS, TomTom will try to find the device for itself rather than using the connection you've configured manually.
Hi I have tomtom 5 and the BT device is on Com8 I just tried all com ports until one worked. Its set to other bluetooth and connects everytime.
would prefer it to automatically set though.
Complete guide to make TT5 work with a BT GPS on the JasJar
http://forum.xda-developers.com/showthread.php?t=244224
worked for me on my exec..... enjoy