Related
Hi i have problem some times caller id show just number when someone call me sometimes(same number) show name from contacts how to fixit
Same thing here...
Sometimes it works, sometimes it does not... Actually it has only worked a couple of times...
At first I thought I was closing the ID Contact Monitor when I used an application close button (Battery Back from Omega One). But then I noticed that it still does not work even without the app closer.
Any clues?
I believe that this is probably down to the 32 process limitation of WM2003 on the XDAII 28 processes open automatically as you open programs the XDAII will close what it thinks isn't needed any more.
Can anyone confirm? :?
Hmmm... It could very well be that... :roll:
If you don't use the "permanent save" feature, then you can delete the 4 flashman files out of the \windows\startup folder.
this gives 4 more process slots. Making the number of running processes at startup more in line with a normal XDA.
wasting 4 process slots on 4 different programs that do the same thing to 4 different databases is rediculous. Having them running even when the feature is turned off is also rediculous.
..Chuck..
Yes, thanks... I deleted the task I don't use and now IACaller is working fine ever since...
Thanks!
I've upgraded to the new ROM, and only the lesser 19 processes now, meant to alleviate this problem.
In addition, it's a newer fix of Caller ID.
And even more, I removed the FOUR flashman/mem processes from startup too.
And even then, I find after just half a day of running apps and stuff, Caller ID no longer shows a photo, and requires a reboot to work properly.
Not happy at all, not in the slightest. Not in the least bit impressed, because i see little else that can be done to fix this, so no likliehood of a solution.
VERY poor to say the least.
Shadamehr,
Are you using an application closer like Pocket Plus or Wisbar?
If not, I suggest you use one. Remember that whithout an app closer you are consuming valuable resources and the X only minimizes them.
Best regards,
Rayan
I was using SideBarX.
What I find however, is that this is the WORSE thing to use, as it closes ALL apps, so if the Caller ID HAD happened to just recently update itself, it would close that too, so in effect, closing the very thing with any potential to fix things.
Alas, I find the only thing that works, is to do a soft reset twice or three times a day.
Not a great loss given how quick re-boot time is, but a bit of a stupid solution nonetheless.
Additionally, I find another slight issue, in that if I get an SMS, when I click the notification envelope on the top bar to open it (if I had left it, not catching it straight away, so the first pop up of it had already gone) then the 'speech bubble' that appears with the message in, is REALLY slow now after the new ROM update, taking a second or two to draw itself properly. I can see the outline of the bubble for a fair while before the bubble 'draws' on screen properly.
Sadly however, it even does this after a soft reset to speed things up, so I am very concerned about this aspect of things.
It worked a lot faster before the update.
The rest of the update has been a good thing for me, but I am a bit angry about the Caller ID problem still being here at least for me, but more worryingly, I am concerned at the apparent speed slow down for some things! Especially as I have read tales of others experiencing this too.
But overall, its nothing earth-shattering I guess.
Shadamehr,
As far as the CallerID problem, at first I was having the same problems but I managed to fix this by removing unwanted items on the startup folder (remember the 32 process limit?) and by using Pocket Plus, since it allows you to exclude CallerID from closing.
I also use ScaryBear Software's Check Notifications to remove duplicate events on my system's databases.
Good luck!
Rayan
Pocket Plus? Cheers mate - I'll go search now.
Here's hoping it works.
Also, the new ROM is only meant to have 19 things running. I have further removed the four flashman files from startup.
Do you know of anything else I can remove?
Cheers mate.
Can't find Pocket Plus mate (at least not as a free app).
Any link for me please?
I don't remember what things where in the Startup folder but this is the stuff I have now:
CheckAutoRun.lnk <--- No idea what this is for
ChgDfLnk.lnk <--- No idea what this is for
ClearTemp.lnk <--- I installed this
IA_Caller_ID.lnk
MMReg.lnk <--- No idea what this is for
Pocket Plus.lnk
Poutlook.lnk
Stk.lnk
VoiceCommand.lnk <--- Microsoft's Voice Command
Cheers and good luck!
Rayan
You can find it here http://www.handango.com/SearchRedirect.jsp?siteId=1&jid=2BD54724B6D87D58BA6CB6BA8BB79B81
Cheers!
Hi all,
I've the problem with with my XDA II and IA Caller ID. It works for one or two hours and then impossible to see a picture. The only thing to do is a soft reset.
I've checked the processes and I'm now with 16 processes (using PHM Task Manager to see the processes) and when the problem occurs, the IA_Caller_ID process is still active.
For information, I use WisBar advance to really close my programs and I kill ActiveSync every time I leave the XDA from the cradle.
Thanks for your help...
hello,
Do you put pictures in your SD Card ?
If yes, try with pictures in your phone memory.
I have the same problem with ringtone in my old Qtek (first generation SPV by Orange)
Sometimes, the sdcard is poweroff to preserve battery life...
test and come back ;-)
THe picture is in "/my documents" none on the SD card
Now it's new, sometimes the XDAII doesn't ring at all. The screen lights on but no ring and no information. :shock:
Every so often I get this message:
"An unhandled error has occurred in the shell. Attempting to restart the shell."
The only thing I can do is hit OK and it restarts. This is my second wizard and the first had this problem as well. I thought that it might be the registry edit that I made to
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Rai\:WMPLAYER
I changed string 1 to replace wmplayer.exe to another program but changed it back in an attempt to fix the problem but I still get the same error.
Any ideas?
Any chance you're trying to close the programs app or the control panel (proper close, not OS minimise). This also causes such a crash.
V
Hi Vijay,
I am also gettign this error, except mine only seems to happen EVERYTIME I close the Program Folder.
i am runing a Vodafone VPA Compact III (TYTN)
Any Ideas on how to fix this?
Thanks.
Yes, don't close the programs folder. VJOkButt has exceptions for the Programs Folders and Control Panel and other system folders, because closing them crashes the OS.
So as Beverly Crusher would say, "don't move your arm".
V
i g3t this also
i also get this.. not all the time but when closing file explorer i dont kno what it could b?
i started getting this a few weeks back. after readuing this post i can confirm it happens when i close my "Programs" folder. what gives???
any help is appreciated
thanks
This recently started happening to me too. Until 2 weeks ago i had never seen tis, not it happens every day.
It seems to happen under different circumstances, but often when i am using Opera.
The odd thing is that i have not changed and settings or installed any new apps...
...however, i did start happening around about the time it started experimenting with over clocking. I have since stopped overclocking, but still get this.
It damn annoying, i really do not want to do a hard reset.
the hard reset will not help. I also re installed the rom and still got the same message. this is really weird.
i guess there is some file somewhere corrupted.
as I played with the phone, I realized that the HTC X button, when set to close the apps, it causes this issue. so I uninstalled it. and I get no more popups.
It has started happening to me too and I have pinpointed it to trying to close the programs folder before the icons load. Any fix available yet?
Hey all has anybody else experienced this? when I open up outlook to check emails or text messages outlook's background doesn't load up, I can see on the top bar the name of the inbox I'm currently supposed to be looking at but the background is my today screen. I can send new messages but basically I can't read new ones if I try to touch the screen I activate whatever I hit on my today screen. I took off all my today screen plugins, but nothing, if anyone has any suggestions or ideas, I would appreciate it.
Sounds obvious and stupid but have you turned the device (hold power button) and back on again? This happens to me sometimes and after a reboot it seems to fix it.
Yeah I do the same thing, the only problem is that it's doing it too often and it's a pain to reset my phone 3 - 4 times a day.
Oh i see. Mine has never done it that often, sorry I can't help any more!
You have a software conflict somewhere - it will be v hard to track down. You could try uninstalling some especially if you have spb products installed as they often are the culprits. But you probably need to hard reset and add programs one by one to find the one.
I had this problem in the past (with old ROMs though)
The way I managed to overcome this is to keep outlook running in the background.
I'm using the Spb Pocket Plus and in the "close button configuration" I added the outlook to the exceptions list. By keeping it running, it always come back with a complete screen (not just top and bottom).
But then again, I didn't see this behavior since I upgraded the ROM; I'm on the 2.26 ROM now.
@gilbnx
Yeah was just thinking of doing something like that more or less.
@meschle
The only spb software I have is spb backup, I always works at first it's just at some point after I've been using the system for a while that it starts doing it. It could be after opening some application and I just haven't noticed. I'll try opening one application at a time and checking to see if it stops working after a certain one, yes tedious I know, but tell you the truth I don't use a whole lotta applications, so I'll stick to the ones I usually open up.
For those of you having this problem, if you are using smartkey, make sure outlook, MMS, Text messaging, are set to be ignored, just like it is in the default smartkey.ini. I had altered the ini and taken out all the programs since I wanted them all to close, but I noticed it started happening after closing outlook with smartkey, so I put it back on ignore and haven't had any problems since (and I hope I won't).
hi all,
been testing quite a bit of software (spb mobile plus, omapclockplus, batterystatus-plugin, etc) and i often find that sooner or later my notifications are screwed - i don't get popups reminding me of meetings etc. i've tried cleaning the notification queue, removing duplicates etc, and always end up doing a hard reset and reinstall of all my software.
this is getting *annoying* - can anyone point me at an explanation of what's going wrong and how I should try and fix it?
ric
fixed.
landwomble said:
hi all,
been testing quite a bit of software (spb mobile plus, omapclockplus, batterystatus-plugin, etc) and i often find that sooner or later my notifications are screwed - i don't get popups reminding me of meetings etc. i've tried cleaning the notification queue, removing duplicates etc, and always end up doing a hard reset and reinstall of all my software.
this is getting *annoying* - can anyone point me at an explanation of what's going wrong and how I should try and fix it?
ric
Click to expand...
Click to collapse
have just used a variety of tools, none of which did anything with automatic deletion. what actually *worked* was using memaid, and searching for all notifications with an action of "NONE" and deleting them all. soft reboot and all appears well.
now, how do i stop this happening again?
I would like to know too But, it seems to be gone so far. It seems like installing uninstalling software will cause this problem?
Info
Check out here:
http://www.scarybearsoftware.com/cn_overview.html
thanks
heronlen said:
Check out here:
http://www.scarybearsoftware.com/cn_overview.html
Click to expand...
Click to collapse
i've seen that (can't install it right now as at work and exes in zips are blocked) but it's nothing particularly new. installing the battery_status plug in borked my calendar reminders last night and clearing all notification type "none" entries using memaid hasn't fixed it this time. i suspect the answer is to stop using plugins like spb mobile shell and battery_status. just restoring my wizard now via SPB backup to see if it helps...
From the software that you have mentioned, the only common software you and I have is this battery_status. However, it just doesnt seems right as I don't think battery_status mess with noti q.
Well, if you want to keep battery_status, you may want to take this drastic approach. The last time, when I've noticed the same problem, I've searched and try to solve the problem by clearning the noti q. However, accidentally, instead of removing doubtful noti, I removed EVERYTHING. However, to my surprise, after a soft reset, the system seems to have rebuilt the q, each and every reminder.
Do a backup first before this drastic approach.
landwomble said:
i've seen that (can't install it right now as at work and exes in zips are blocked) but it's nothing particularly new. installing the battery_status plug in borked my calendar reminders last night and clearing all notification type "none" entries using memaid hasn't fixed it this time. i suspect the answer is to stop using plugins like spb mobile shell and battery_status. just restoring my wizard now via SPB backup to see if it helps...
Click to expand...
Click to collapse
Here you go the cab files
Careful
What the Scarybear notification removal software, it sometimes clears out them all, leaving activesync failing. If this happens run 'FixASRunAt', you can find it by search in the forums, this will ensure Activesync does not fail.
thanks
funman said:
Here you go the cab files
Click to expand...
Click to collapse
much appreciated, dude!
I had the same problem. Suddenly the tasks did not remind me anymore. The device turned on at the scheduled time but there was no notification popup or sound.
What I did was delete every task from the device, delete all the notifications related to TASKS.EXE with the tool found on this thread http://forum.xda-developers.com/showthread.php?t=280104, sync with Outlook and move the deleted tasks from the Deleted items folder to the main Tasks folder so they're back, and that's it. It's working again!
Hope the tip helps someone!
Hey there guys, just a quick one for ya.
Has anyone come across a problem with HTC Addicts cleanRAM?
when i click the the icon to clean it starts the process but then runs my email application(default HTC app) also.
It started doing this yesterday with no changes made to my registry or other device settings.
I've tried un-installing the program and then re-installing but i still get the same (annoying) result.
Has anyone else encountered this? and if so do you know of a fix?
Many Thanks
Sharingan
Well, for me, when I run the Level 3 purge, it takes me to the dial-pad screen for a few seconds. Never really bothered me though...
dial pad
level 3 takes me to dialpad also, wierd, but works ok,,
I also get this with Level 3.
...and for me as well.
This is just how it goes with cleanram. If you have done a customized process list than I would suppose thats why it's bringing up your email because it's purging anything in your list so if it's not running already it will bring it up to purge it to make sure it's not in the memory anymore.
Yea the thing is, i haven't ran a custom purge, i just do Level 3, and it doesn't just pop up, it keeps it open :s Thats why it was annoying for me, doesn't look like there is any kind of fix, just something we have to live with. Thanks for your input!
same here
I think I have the problem that after Cleanram, My Contacts and Programs wont open at all. Then calender says Error: Not enough program memory to start program...
This is a great tool but it keeps doing this to me...
I do a level one purge or 2, same thing happens..
any ideas?
feyt said:
I think I have the problem that after Cleanram, My Contacts and Programs wont open at all. Then calender says Error: Not enough program memory to start program...
This is a great tool but it keeps doing this to me...
I do a level one purge or 2, same thing happens..
any ideas?
Click to expand...
Click to collapse
Don't use Clean RAM, lol. It's not like you need to use it. I have 576Mbs enabled and I never use Clean RAM, most of the RAM used is just cache so your most commonly use programs will open faster if you don't use it.
I've never got any slow down from not using it.