Hey all has anybody else experienced this? when I open up outlook to check emails or text messages outlook's background doesn't load up, I can see on the top bar the name of the inbox I'm currently supposed to be looking at but the background is my today screen. I can send new messages but basically I can't read new ones if I try to touch the screen I activate whatever I hit on my today screen. I took off all my today screen plugins, but nothing, if anyone has any suggestions or ideas, I would appreciate it.
Sounds obvious and stupid but have you turned the device (hold power button) and back on again? This happens to me sometimes and after a reboot it seems to fix it.
Yeah I do the same thing, the only problem is that it's doing it too often and it's a pain to reset my phone 3 - 4 times a day.
Oh i see. Mine has never done it that often, sorry I can't help any more!
You have a software conflict somewhere - it will be v hard to track down. You could try uninstalling some especially if you have spb products installed as they often are the culprits. But you probably need to hard reset and add programs one by one to find the one.
I had this problem in the past (with old ROMs though)
The way I managed to overcome this is to keep outlook running in the background.
I'm using the Spb Pocket Plus and in the "close button configuration" I added the outlook to the exceptions list. By keeping it running, it always come back with a complete screen (not just top and bottom).
But then again, I didn't see this behavior since I upgraded the ROM; I'm on the 2.26 ROM now.
@gilbnx
Yeah was just thinking of doing something like that more or less.
@meschle
The only spb software I have is spb backup, I always works at first it's just at some point after I've been using the system for a while that it starts doing it. It could be after opening some application and I just haven't noticed. I'll try opening one application at a time and checking to see if it stops working after a certain one, yes tedious I know, but tell you the truth I don't use a whole lotta applications, so I'll stick to the ones I usually open up.
For those of you having this problem, if you are using smartkey, make sure outlook, MMS, Text messaging, are set to be ignored, just like it is in the default smartkey.ini. I had altered the ini and taken out all the programs since I wanted them all to close, but I noticed it started happening after closing outlook with smartkey, so I put it back on ignore and haven't had any problems since (and I hope I won't).
Related
Hi i have problem some times caller id show just number when someone call me sometimes(same number) show name from contacts how to fixit
Same thing here...
Sometimes it works, sometimes it does not... Actually it has only worked a couple of times...
At first I thought I was closing the ID Contact Monitor when I used an application close button (Battery Back from Omega One). But then I noticed that it still does not work even without the app closer.
Any clues?
I believe that this is probably down to the 32 process limitation of WM2003 on the XDAII 28 processes open automatically as you open programs the XDAII will close what it thinks isn't needed any more.
Can anyone confirm? :?
Hmmm... It could very well be that... :roll:
If you don't use the "permanent save" feature, then you can delete the 4 flashman files out of the \windows\startup folder.
this gives 4 more process slots. Making the number of running processes at startup more in line with a normal XDA.
wasting 4 process slots on 4 different programs that do the same thing to 4 different databases is rediculous. Having them running even when the feature is turned off is also rediculous.
..Chuck..
Yes, thanks... I deleted the task I don't use and now IACaller is working fine ever since...
Thanks!
I've upgraded to the new ROM, and only the lesser 19 processes now, meant to alleviate this problem.
In addition, it's a newer fix of Caller ID.
And even more, I removed the FOUR flashman/mem processes from startup too.
And even then, I find after just half a day of running apps and stuff, Caller ID no longer shows a photo, and requires a reboot to work properly.
Not happy at all, not in the slightest. Not in the least bit impressed, because i see little else that can be done to fix this, so no likliehood of a solution.
VERY poor to say the least.
Shadamehr,
Are you using an application closer like Pocket Plus or Wisbar?
If not, I suggest you use one. Remember that whithout an app closer you are consuming valuable resources and the X only minimizes them.
Best regards,
Rayan
I was using SideBarX.
What I find however, is that this is the WORSE thing to use, as it closes ALL apps, so if the Caller ID HAD happened to just recently update itself, it would close that too, so in effect, closing the very thing with any potential to fix things.
Alas, I find the only thing that works, is to do a soft reset twice or three times a day.
Not a great loss given how quick re-boot time is, but a bit of a stupid solution nonetheless.
Additionally, I find another slight issue, in that if I get an SMS, when I click the notification envelope on the top bar to open it (if I had left it, not catching it straight away, so the first pop up of it had already gone) then the 'speech bubble' that appears with the message in, is REALLY slow now after the new ROM update, taking a second or two to draw itself properly. I can see the outline of the bubble for a fair while before the bubble 'draws' on screen properly.
Sadly however, it even does this after a soft reset to speed things up, so I am very concerned about this aspect of things.
It worked a lot faster before the update.
The rest of the update has been a good thing for me, but I am a bit angry about the Caller ID problem still being here at least for me, but more worryingly, I am concerned at the apparent speed slow down for some things! Especially as I have read tales of others experiencing this too.
But overall, its nothing earth-shattering I guess.
Shadamehr,
As far as the CallerID problem, at first I was having the same problems but I managed to fix this by removing unwanted items on the startup folder (remember the 32 process limit?) and by using Pocket Plus, since it allows you to exclude CallerID from closing.
I also use ScaryBear Software's Check Notifications to remove duplicate events on my system's databases.
Good luck!
Rayan
Pocket Plus? Cheers mate - I'll go search now.
Here's hoping it works.
Also, the new ROM is only meant to have 19 things running. I have further removed the four flashman files from startup.
Do you know of anything else I can remove?
Cheers mate.
Can't find Pocket Plus mate (at least not as a free app).
Any link for me please?
I don't remember what things where in the Startup folder but this is the stuff I have now:
CheckAutoRun.lnk <--- No idea what this is for
ChgDfLnk.lnk <--- No idea what this is for
ClearTemp.lnk <--- I installed this
IA_Caller_ID.lnk
MMReg.lnk <--- No idea what this is for
Pocket Plus.lnk
Poutlook.lnk
Stk.lnk
VoiceCommand.lnk <--- Microsoft's Voice Command
Cheers and good luck!
Rayan
You can find it here http://www.handango.com/SearchRedirect.jsp?siteId=1&jid=2BD54724B6D87D58BA6CB6BA8BB79B81
Cheers!
Hi all,
I've the problem with with my XDA II and IA Caller ID. It works for one or two hours and then impossible to see a picture. The only thing to do is a soft reset.
I've checked the processes and I'm now with 16 processes (using PHM Task Manager to see the processes) and when the problem occurs, the IA_Caller_ID process is still active.
For information, I use WisBar advance to really close my programs and I kill ActiveSync every time I leave the XDA from the cradle.
Thanks for your help...
hello,
Do you put pictures in your SD Card ?
If yes, try with pictures in your phone memory.
I have the same problem with ringtone in my old Qtek (first generation SPV by Orange)
Sometimes, the sdcard is poweroff to preserve battery life...
test and come back ;-)
THe picture is in "/my documents" none on the SD card
Now it's new, sometimes the XDAII doesn't ring at all. The screen lights on but no ring and no information. :shock:
I am new to the whole PDA form so please forgive me if this is obvious but I have not found the answers on this site.
I have an O2 XDA mini s and am slowly getting the hang of it.
Problem: On closing all running programs in task manager I loose the use of the phone keypad, pressing the green call button brings up the phone application but minus the number keys, calls can still be made through contacts. A soft reset is required to recify.
?Related problem: In task manager, there are programs running that are not visible on the list (if I press below the last visible item something is selected and I can "goto" it.
Plus on occation the listed item takes me to a different program ie. selecting media player takes me to Word (no set pattern though).
All help would be appreciated.
Thanks in advance
StefanF: what task manager are you using?
V
Sorry, just to clarify, PDA is "as out of the box", so just the WM5 task manager.
Thanks for your interest, I have followed several of your posts and seen your site. You have some great programs I would like to use, particually like the big phone buttons and close application tool but am quite scared of this thing.
It may be a while before I mess to deeply.
Stefan: that sounds like an odd problem.
The built in task manager is useful but not very comprehensive.
If you want to view all running tasks etc, there are much better programs out there, many are freeware. If you can't find any better, check out one I've posted here:
http://forum.xda-developers.com/viewtopic.php?p=190257#190257
It's not written by me, I've just re-added some features.
Note - closing the phone (cprog.exe) is not a particularly good idea unless you really need it, because some other apps expect it to be loaded (eg contacts)
My programs
Some are ok. You might want to try my program VJOkButt if you just want to close apps to keep your memory healthy. But that's subject to taste and it's not clear how useful - although on the Wizard, it might be helpful.
The big phone buttons are actually just for the universal, it's not designed for Wizard. Basically it's for VGA phones that are using the ful VGA hack.
I've got some other stuff coming out soon. Stay tuned :wink:
V
Phone application
Thanks for the info.
I think, from what you have said, I need to know what I am doing to shut down the phone application as it is never my intention.
Pitty about the big button program. Why is there not full customisation of the screen (as in desktop PC's, can change the size of buttons, scroll bars... both of which are to small for finger use on this)
As a side note, when I am in an application the menus and any selections within make a click upon pressing ie. in word, Menu>Cut each selection makes a click. I have all tap sounds off but the only way I can stop it is to turn the master volume all the way down. Any ideas?
Once again, thanks.
You have to overwrite some of the default sounds with empy sounds to disable all click sounds. At least that's what I did, but that was a long time ago..basically you use your pc, make an empty .wav file, and overwrite the necessary files in your \windows\ folder. If you're interested in doing this and need more help, shout out!
Closing the phone - yes, you would probably not close it without knowing what you're doing. I presume when you're not using the task manager you're not having the phone problems?
Try a program called CETuner to help play around with your scrollbars etc. It's good for modifying colour themes and various settings on the go. Another program worth looking at is Tweak 2k .net.
V
Many thanks.
Personally i'm currently using Magic Button to close apps and act as a task manager. http://www.freewareppc.com/utilities/magicbutton.shtml
It allows you to close or minimise apps, and by clicking the "house" icon on the windows bar you can also close all, soft reset etc. Final point on it is that you can see X number of running apps and touch to swap to them, or "hide when inactive" and "keep alive" so you dont close (or even see) some apps - i keep messages & phone in this state to improve response times but close use close all to kill everything else.
Danger using Task Manager
Stefan,
I had the same problem. Ideally you should use Start/Settings/System/Memory/Running Programs to close down active tasks. Yes, the Task Manager does it and you can launch it from the menu, but it is a bit dangerous (as I found out). The Phone app appears in Task Manager as an unnamed icon and its icon looks like the Windows Media Player one (at least it does on my XDA Mini S). Shutting this down will do exactly what you describe (I started a thread called 'Help I'm stuck in Contact History on this).
By all means use Task Manager if you want to, just don't shut all apps, leave the unnamed 'media player lookalike' icon.
Cheers. :wink:
To the original poster:
I had this problem when i got my XDA at first. To be honest, i think its the o2 active stuff that messes up the phone app.
My suggestion is this: back up any important data, then do a hard rerset of your phone. When the screen comes up about Standard, Corporate or Basic install choose the Corporate option and use the passcode 0506. this will allow you to use the phone without any of the o2 crap and since i done it i've had no problems with the phone.
just to let you know, this will stop the phone setting up its own GRPS and MMS settings, but if you phone o2 ar go into a shop then they will happily send them to you.
Hope this helps.
Task Manager or Active ?
I suspect that it is shutting down the phone app that's causing the issue not Active. I agree, get rid of Active if you don't like it (I use Basic so I still get the MMS settings), but I don't think Active is the cause.
Just my humble opinion of course.
I'd completely overlooked that StefanF was using o2. I'm an O2 and Orange user, but O2 active has never touched my system. Sounds like that's quite an oversight by them if the O2 Task Manager allows you to close the phone app... not recommended!
V
Oooer indeed
My friend has an XDA Exec (Universal) and he had lots of problems with the phone app which I strongly suspect were much the same thing. (although his apps in task manager were not unnamed, he had multiple phone apps running). I didn't know the Task Manager was an O2 add-on, I assumed it was a WM5 feature.
Background:
ATT8525 with the ATTWM5 Rom
All of a sudden no alarm will work on this device. I have SPB Time and City Time Alarm both installed and ever since Saturday morning my daily alarms do not sound.
Thought it was a fluke at first but I've been playing with it tonight trying several different times and nothing seems to work. I even tried the built in WM5 alarm and it didn't work either.
This isn't related to the no sound issue I've inquired about in the past as right now all my OTHER sounds are working.
I've also done multiple soft resets and I've checked and double checked that my phone has the correct time and time zone.
Any ideas?
Thanks
It sounds like you have some duplicate/out of date/bad notifications in your notifications queue.
First do a full backup (just in case) then:
You need to use a 3rd party app such as Checknotifications (free), Memmaid, SK tools.
Use one of these to eliminate duplicate notifications and see if things start working again. If not, unfortunately you will have to go through each one manually. Look at the ones beginning Calendar and Clock. Make sure that the time/date for these is in the future. Delete the ones that are not. Leave alone the other notifications some of these are necessary for other processes.
See if it works now.
If not, you may have to do a hard reset. Good luck!
marisa4755 said:
It sounds like you have some duplicate/out of date/bad notifications in your notifications queue.
First do a full backup (just in case) then:
You need to use a 3rd party app such as Checknotifications (free), Memmaid, SK tools.
Use one of these to eliminate duplicate notifications and see if things start working again. If not, unfortunately you will have to go through each one manually. Look at the ones beginning Calendar and Clock. Make sure that the time/date for these is in the future. Delete the ones that are not. Leave alone the other notifications some of these are necessary for other processes.
See if it works now.
If not, you may have to do a hard reset. Good luck!
Click to expand...
Click to collapse
Thanks for the reply.
Memaid did the trip as it was a built up queue of notifications. Not sure what caused that but at least it's fixed without having to do a hard reset.
This never happened with my 8125, strange.
Also, this fixed a couple of other issues I was having.
My 8525 had stopped pairing with my automobile's BT and it did this morning, and the last few days the phone and stopped doing the first active sync of the day (at 0700) automatically. It did this morning.
Looks like I may check into purchasing Memaid. It's a handy little program.
I have to admit, it's one of the first apps on any device I own. Especially now that it has a reg editor too.
Beware, you may need to do the notifications queue clearout quite frequently, just keep an eye on it for a day or 2. I've found that if you use windows live mobile, this puts 3 or 4 duplicates on your system at every soft reset! Don't you just love microsoft applications?
marisa4755 said:
I have to admit, it's one of the first apps on any device I own. Especially now that it has a reg editor too.
Beware, you may need to do the notifications queue clearout quite frequently, just keep an eye on it for a day or 2. I've found that if you use windows live mobile, this puts 3 or 4 duplicates on your system at every soft reset! Don't you just love microsoft applications?
Click to expand...
Click to collapse
Gee I wonder if the iPhone's have to do this?
Sorry, couldn't resist.
They probably would have to if they were allowed to install 3rd party applications!
marisa4755 said:
They probably would have to if they were allowed to install 3rd party applications!
Click to expand...
Click to collapse
Sharp answer Marisa4755 - I also think texas should be punished for that uncalled for remark; I'm thinking 6 month ban (I always was too lenient )
Mike
Nah
I'll just retaliate by posting on the iphone-developers forums
marisa4755 said:
Nah
I'll just retaliate by posting on the iphone-developers forums
Click to expand...
Click to collapse
Oh thank you.
At first I thought you all were just ganging up on my since I'm across the pond from you all. <G>
Kinda back to my original question.
What is up with the Notification Queue? I currently have 37 "time based" entries. A few of these are obvious. But I have a whole mess named "\\.\Notifications\NamdedEvents\Scripts:0x0023B3D0" and a couple of dozen more with similar hexadecimal(?) endings.
They are all "dated to run" on September 26, 2007 at various times of the morning.
The thing is, nothing is in my calender on that date. So what in the world are those entries? Are they safe to delete?
Thanks
Don't mind us, if you play with Windows mobile, you just have to have a laugh as often as possible (makes up for all the crying!).
On your alarms/reminders/notifications etc, do you have the setting on for 'flash light'? If so, do you have this set for no limit? If so, I think these are your scripts as above. If they are set as no limit, I think they go on for around 40 days or so. So probably they relate to an event 40 ish days before 26 September.
They might also relate to some other software you are running. I understand TomTom puts some strange notifications in.
If so, they are PROBABLY fine to delete. As long as you do a full backup before touching them, then if it all goes pear shaped, just restore your backup.
Whatever you do, don't touch the repllog.exe entries. These relate to activesync and if you delete these, you will have a lot of trouble with synchronising.
If, however you do accidentally delete a repllog file that you should't, Mike has written an excellent guide on how to get it back!
http://forum.xda-developers.com/showthread.php?t=302459&highlight=repllog.exe+activesync
marisa4755 said:
Don't mind us, if you play with Windows mobile, you just have to have a laugh as often as possible (makes up for all the crying!).
On your alarms/reminders/notifications etc, do you have the setting on for 'flash light'? If so, do you have this set for no limit? If so, I think these are your scripts as above. If they are set as no limit, I think they go on for around 40 days or so. So probably they relate to an event 40 ish days before 26 September.
They might also relate to some other software you are running. I understand TomTom puts some strange notifications in.
If so, they are PROBABLY fine to delete. As long as you do a full backup before touching them, then if it all goes pear shaped, just restore your backup.
Whatever you do, don't touch the repllog.exe entries. These relate to activesync and if you delete these, you will have a lot of trouble with synchronising.
If, however you do accidentally delete a repllog file that you should't, Mike has written an excellent guide on how to get it back!
http://forum.xda-developers.com/showthread.php?t=302459&highlight=repllog.exe+activesync
Click to expand...
Click to collapse
Thanks. I think the message notification thing is the reason. I do have the flash light checked and their seems to be a correlation between the entries and the number of messages I currently have in OL.
Thanks again for all the help!
Hopefully I can return the favor sometime.
David
I hope by now you have solved your (our) problem. I was able to fix my problem by installing a free program from Burr Oak called Wakeup Tweak.
I never ever RAN the program - I just installed it. During installation, it asked me if I wanted to use default notifications and I said yes.
I then tested an appointment alarm (before running Wakeup Tweak) and the alarm worked.
Hey there... I used to have the same problem under WM5 (I think it was a known fault and the idea was to fix that for WM6). My reminders didn't work, and my alarm, initially came on but I could not dismiss it, and so came back on the moment I switched my phone back on etc. I found that using Pocket Mechanic and then deleting all 'clock.exe' entries i which have the word obsolete added under the type column solves the problem. I think some people have experienced problems doing this and it messed up their device. I, personally, never had any problems but you may want to back up things just in case. Again, it's not a long-term solution and I had to do that every couple of weeks. The deleting of duplicate notification did not, for me, restore reminders etc. I have to say ever since I upgraded to WM6 I have not had this problem so I guess Microsoft fixed this issue.
I was just wondering if anyone else have had any of these problems that I have been having.
1. Sometimes the phone will not play any sound at all no music,slide sounds, or ring but i can make a call and hear and talk perfect and the phone will vibrate when i get a call i made sure the sounds are on. Soft reset fixes this everytime but it seems to happen more now like every other day.
2. I have the 6 tab HTC home plugin on my today screen and it used to play music right off the today screen on its own media player not WM. Now when i try to use it it opens WM and i cant change songs from my today screen and it seems stuck on a song but it does not change or update the track info. The only thing it does is open WM when i tap the song name but nothing else. I think I might of messed this up when i reinstalled the WM play button today plugin and i now set the plugin to use the HTC audio manager but i would like it to control WM like i wanted to and the 6 tab plugin to control the HTC audio like its supposed to
3.Almost everytime i get 2 text messages at the same time or a phone call and text at or close to the same time this thing goes nuts vibrating till i turn it off.
4. Sometimes when i use Windows media player and use one of my playlist some of the songs say file cannot be found and i have to delete the song and go back and add it again when its in the same folder as it always is.
Anyone else having any of these problems or am i the only one? I have the new ROM installed and alot of other junk
the no sound problem i have encounterd. as a matter of fact it happened twice today. don't know what that's about.
as for the rest of your issues i have never experienced them. i do have the 6 tab home plugin and i do play music but i've never experienced number 2.
Do you have anything setup in your calendar? On one of the HTC Home tabs, it has the sound settings. If it is set on automatic, it will put the phone on vibrate if you have any appointments on your calendar, and turn back the sound when the appointment is over.
5.0stang said:
3.Almost everytime i get 2 text messages at the same time or a phone call and text at or close to the same time this thing goes nuts vibrating till i turn it off.
Click to expand...
Click to collapse
I also have the same 6 tab HTC today installed.
And almost everytime I get a txt or an email notification + a phone call at the same time, the unit freaks out, I can't answer the phone and I almost have to always perform a hard reset.
I have these installed:
- HTC Home Customizer
- TCPMP
- flashlight
- Google maps
- Opera Browser
- PHM RegEdit
- PocketCMD
- RDP Port Switcher
- Telus Mobile Email (visto client I think)
- X-Button
Running WM6
Same Problem.. No Sound
I am having the same problem!!
I am on my second Mogul now due to the fact that intermittently
all the sounds from the speaker stop working. (Ringer, Music, everything)
The sounds come back after a soft reset but it's very annoying!
I have seen other posts with people having this problem but no solutions.
I believe this is a software issue not a hardware as this is my second Mogul this is happening to (the first one I RMA'd for this same issue) and I have tried several different software products on the phone.
This is the what I had on the first mogul:
SPB Mobile Shell
SPB Phone Suite
SPB Pocket Plus
SPB Backup
IM Plus
Resco Explorer
Sk Tools
2kTweaks
This is what I put on the second mogul:
HTC Home (6 Tab)
HandySwitcher
IM Plus
Resco Explorer
SPB Backup
SK Tools
Both are losing all sounds after a period on time!!
If anyone can help me figure out I am periodicly losing sound I would be forever in your debt!!!!
Here's a crazy thought.... any of you try to do a hard reset and NOT load any third party or non-native apps onto the Mogul to see what happens for a few days?
TC1.... The phone is useless without some of these apps.... I can't pull out the stylus everytime I want to do something on the phone....
There are usually alternative apps. I guess the question is would you rather find the cause to the sound problem or run those apps?
ImCoKeMaN said:
There are usually alternative apps. I guess the question is would you rather find the cause to the sound problem or run those apps?
Click to expand...
Click to collapse
Exactly.
This is troubleshooting 101... need to setup a controlled experiment. Start with the basic product and go from there. Note your observations. Add one application at a time and note your observations. Using deductive logic you'll eventually find the cause.
And others please don't whine about the Mogul being "unusable" without these extra apps. The Mogul functions out of the box as a phone and WM6 PDA. Do some of these apps make you more productive? Absolutely. But in order to troubleshoot you can live without them for a few days.
This is my 2 pda in less than 3 months when i 1st had it i didnt know i could install all these apps so it was at least a week or two before i found this site and a few others and i remember i installed the new ROM hoping it would fix the problem...still hoping...
IM+....
Some people have claimed that it's IM+ thats causing the issue........ I will uninstall it and see what happens.... Let's keep this post alive and get the bugs out!....
Got #2 onmy list fixed now i can use the HTC audio manager on my 6th tab and my windows on the today screen on the bar right underneath if i knew how to get a pic of my screen it would be easier to explain what im talkin bout...still waitin on a ROM fix or something.... or REV A
TC1 said:
Exactly.
This is troubleshooting 101... need to setup a controlled experiment. Start with the basic product and go from there. Note your observations. Add one application at a time and note your observations. Using deductive logic you'll eventually find the cause.
And others please don't whine about the Mogul being "unusable" without these extra apps. The Mogul functions out of the box as a phone and WM6 PDA. Do some of these apps make you more productive? Absolutely. But in order to troubleshoot you can live without them for a few days.
Click to expand...
Click to collapse
I agree 100% with you TC1.. I have similar apps listed installed on mine and have no issues. Now when I first came across HTC Home installer I did have issues with certain alerts / ringers not working. This was mainly if I had removed my SD card temporarily and at the same time received a call / alert. Of course it wouldnt sound but when I would put back the SD it still wouldnt sound so I had no choice but to reboot the device.
What I determined is setting the HTC profile to SILENT prior to removing the SD card avoids having to reboot in the invent I would get a message / alert / fone call. Since then no issues.
Also installing the more current HTC home helped out.. As ringer profiles on occasion would set itself to SILENT / VIBRATE on it own.
Ive always thought it had something to do with the 6tab HTC home plugin but i removed it and it still did it
I believe it has nothing to do with any 3rd party software but the phone (windows,HTC,Sprint) itself.... I just wish there was a way to fix it!!
Have anyone with WM5 loaded on their titan had these problems? I really wanna know y i cant use any playlist on my windows media player more then 5 times before it says file can not be found in libary when i have not moved anything
same probem quick fix
i get the same problem.
but all i do is turn it of and then turn it back on and it works great.
haven't figured out what is causing it, all i know is that it does it after i get on line. don't have any third party software on it yet so that could not be the problem. i am how ever looking for spb phone suite or anything with smson it for mobile 6. mogul titan
Every time I hit the space bar now, or a symbol key, whether it be in an e-mail, browser, text; whether it is the virtual keyboard or actual, my phone will all of a sudden just quit out of whatever app. it is in. Anybody know what the heck this is?!
hey man i've got the same problem!
did yours got fixed?
and how?
Same here. You guys running WM6.5?
i think its from some registry entries not agreeing...
i've seen similar closing of programs with random button presses
try and narrow in on the scenario with your latest additions to the device...
i would be surprised if this is happening on stock rom
i would suggest all posting up your current rom/carrier...etc
thats how it will get narrowed in on
personally i installed a new rom and it went away
i tried using a backup program and it didn't solve it...problem was saved in there
so all my settings had to be entered manually again
it may have been my backup program at the time (spb clone) which sucks in my opinion
using sprite backup now and seems to be effective (two successful backups logged)
but i didn't use sprite at the time of this issue
try one of the newer roms available