Database Users

Notification queue - brief list please

Could someone please be so kind as to list the entires in the notification queue of a fairly clean JasJar for me. Just the main program, found using Pocket Mechanic, and excluding standard calendar entries.
I mistakenly deleted something, and I need to try and figure out what it was without going thro a hard reset...

craigiecraigie4 said:
Could someone please be so kind as to list the entires in the notification queue of a fairly clean JasJar for me. Just the main program, found using Pocket Mechanic, and excluding standard calendar entries.
I mistakenly deleted something, and I need to try and figure out what it was without going thro a hard reset...
Click to expand...
Click to collapse
Pls don't get angry on me.
I have the same sound/nomore calendarwarning at all/ and random alarm problem.
I downloaded, on you advice, pocketmechanic, and am now in front of the Notification Queue.
Can you tell me what I can delete and what I can't?
huib

You can delete CALENDAR and TASKS entries - they will re-add themselves. But rather not cos you have nothing to gain
\\.\Notification\.....SCRIPT... entries seem to cause problems. If they are due to activate soon, leave them alone. If they are due to go off in a few days, kill the little buggers. I think that many of them are registration checkers.
You WILL have duiplicate sddaemon entries with yellow icons. Kill them ALL and enjoy it!
You should find 1 of each of the follwoing:
- repllog
- \windows\calupd
- CALNOT
You will find 2 of each of the following:
- calnot
- clocknot
- repllog
ANything else is 'interesting'. Google it and kill it if it does not point to something u r happy with. I have never had one not sort itself out if it was required (eg weather updating - will come back when weather app next loads).

OK, so I did. Deleted 46 dups.
And than a soft reset:
Still 46 dups over there. But first:
The warning sound that comes up, starts before even asking for the Sim pin. Nearly immediately after soft resetting, this sounds comes up It keeps warning me for quite a time and then stops. I think it repeats about 8 times, but everytime with a slower interval between the (three tones) beeps. Do you think it should also be in that queue?
I really don't want to hard reset any more. It is so much work.
Before this problem started I had my battery drained , ignoring low battt warnings. Could that be the case? That the jasjar shuts down before properly handling the sounds?
The calendar does not warn anymore, so somewhere in this queue something is blocked?
Interesting, right?
Huib

Hell, not sure 'interesting' is the word I'd use. This sounds awful.
I did hear that running the battery empty is indeed bad for a Universal. But I think it was bad for the battery not for the ROM.
I don't understand why your duplicates come back! Post a list of the following:
- A few of the duplicates in detail
- An idea of what all these duplicates are (are they all the same)
- A list of progs in \windows\startup
- A list of installed apps (excluding games and things)
This is surely easy to solve. Let's see what we can do.

craigiecraigie4 said:
Hell, not sure 'interesting' is the word I'd use. This sounds awful.
I did hear that running the battery empty is indeed bad for a Universal. But I think it was bad for the battery not for the ROM.
I don't understand why your duplicates come back! Post a list of the following:
- A few of the duplicates in detail
- An idea of what all these duplicates are (are they all the same)
- A list of progs in \windows\startup
- A list of installed apps (excluding games and things)
This is surely easy to solve. Let's see what we can do.
Click to expand...
Click to collapse
\windows\sddaemon.exe apprunAfterrestore action details: n/a
Notify when a device restore is complete. handle: 0x300056
and many more nearly the same but with handle 0x3a000055 or 0x3f000056 or idem but with 0x38000059 etc etc
Alle of the dups are in that list, close to each other. So they are more or less the same.
What about a suggestion to" Just remove sddaemon.lnk from \windows\startup\
then soft reset. it is ok"
from this post: http://forum.xda-developers.com/viewtopic.php?p=180017#180017
In windows startup: Poutlook and sddaemon + spb GPRS notify (GPRS is recently new, after the problems started)
progs: listpro, pbreeze ( But I did not have that installed when the problems rised the first time I had them) Pocketweather, Ewallet ( now removed) NR de Luxe,
Edited: oops , I forgot Agile. And I also forgot to say that I had many freezes, using Agile. So also here there could be a source of problems.
Huib

Create a new folder \windows\StartupDisabled, and move sddaemon here. Kill the duplicates, and soft reset. I can't imagine that they come back. Does this solve the startup issue. If not, you'll need to tell us exactly what else is running under notifications.
If it works, keep it like this for a few days and see if voice command still works OK. I'm trying myself right now after reading that post.

craigiecraigie4 said:
Create a new folder \windows\StartupDisabled, and move sddaemon here. Kill the duplicates, and soft reset. I can't imagine that they come back. Does this solve the startup issue. If not, you'll need to tell us exactly what else is running under notifications.
If it works, keep it like this for a few days and see if voice command still works OK. I'm trying myself right now after reading that post.
Click to expand...
Click to collapse
Sorry, but still dups ( 43 now)
And that stupiud warningn sound is still there. My right led keeps blinking, and I thought it should not blink.
A hard reset? (becoming suicidal)'
Huib

This does not make sense; we are going to check 3 things:
1) are u using PM correctly
2) are dups truly getting deleted
3) is the soft reset bringing them back
4) if so, let's stop it
1) Are you correctly using PM to remove dups? You need to TICK each item to be removed (each yellow icon), either manually or by clicking 'dups' button. You THEN have to click "remove" button. You MUST then check that dups have indeed been removed.
2) Exit PM, go back in and check they are not there. If they've come back, then you have a corrupted notifications queue that PM is not dealing with correctly. Hard reset I'm afraid - but look for another post I started on TIPS n TRICKS - it's not nearly as brutal as u think.
3) Now, soft reset - if they came back then it's the reset that's causing the porblem. If not, then you should be good. Is your SR going OK without the sounds now?
4) If they DO come back, then look for notification queue entires linked to "AppRUnAfterRestore" and tell us what they are.

craigiecraigie4 said:
This does not make sense; we are going to check 3 things:
1) are u using PM correctly
2) are dups truly getting deleted
3) is the soft reset bringing them back
4) if so, let's stop it
1) Are you correctly using PM to remove dups? You need to TICK each item to be removed (each yellow icon), either manually or by clicking 'dups' button. You THEN have to click "remove" button. You MUST then check that dups have indeed been removed.
2) Exit PM, go back in and check they are not there. If they've come back, then you have a corrupted notifications queue that PM is not dealing with correctly. Hard reset I'm afraid - but look for another post I started on TIPS n TRICKS - it's not nearly as brutal as u think.
3) Now, soft reset - if they came back then it's the reset that's causing the porblem. If not, then you should be good. Is your SR going OK without the sounds now?
4) If they DO come back, then look for notification queue entires linked to "AppRUnAfterRestore" and tell us what they are.
Click to expand...
Click to collapse
1. I click DUP: 44 found Then I click DELETE and I read : 44 notificatons succesfully deleted.
2.I leave PM an start it again to be sure : I click DUP: 0 found.
3. Soft reset directly after that, goto PM etc and: the same 44.
Sounds are still there: when sounds stop after x times richt LED keeps blinking red or orange colour.
4. Notification type: system event
Application to run:sddaemon.exe
parameters AppRunAfterRestore
Action detqails: N/A
details: Notify when a device restore is complete.
Handle: 0x30000030
next is identical but 0x300000e
then 33 or 37 etc, etc, tiil the last with 81 on the end
Am I driving you mad?
Huib

Hell, this sounds awful. Only thing I can think of is to kill ALL sddaemon entries (you MIGHT then lose voice dial functionality) and try again. If they come back again, a hard reset may be the only solution. Sorry.

craigiecraigie4 said:
Hell, this sounds awful. Only thing I can think of is to kill ALL sddaemon entries (you MIGHT then lose voice dial functionality) and try again. If they come back again, a hard reset may be the only solution. Sorry.
Click to expand...
Click to collapse
you are refeering to MS voice Dial? I installed that , but it never worked so I removed it.
I have ROM 1.12.38.WWE, could that be the reason?
Huib

FIXED!!!
Cross-Posted: http://forum.xda-developers.com/viewtopic.php?p=236727#236727 on Mon Feb 27, 2006 23:31
Subject: ! FIXED!!!
--------------------------------------------------------------------------------
Hello All!
After 3 weeks of usage of my Qtek9000:
- all the Calendar notifications dissapeared (no text, no sound);
- the Alarms did have sound and vibra, but no text and Notification softbutton on the screen;
- alarms sounds could appear on their selfs on a random time and no Text on the screen.
I've searched the forum and it learned out that it is a Notification Que Issue.
It looks that upon a time, that que is being oversized or some mess (duplicates?) happened in it.
So, after that the "Notification Que" Issue appears.
HOW I FIXED IT:
1. Get the MemMaid \ PocketMechanic app;
2. find and delete duplicates, SoftReset (SR) (no success so far);
3. delete up to 200 CALENDAR.EXE entries, (SR) (no success so far);
4. delete up to 100TASK.EXE entries, (SR) (no success so far);
5. delete .\\notificatiopn.....script... entries, (SR) (no success so far);
6. delete all repllog.exe entries (2) and SR- IT WORKS AGAIN !!! ;
From this case - I dont know which of the manipulations actually brought my notifications back alive (is that really the repllog.exe entry?)
The possible longterm solution may be a 3-rd party App, which performs scheduled Notification Que clean up?
This is a very annoying and awfull BUG in the WM5 !!!
As I don't believe the fillowing ROM releases will fix this critical bug, the only way out - is developing the system app to perform a scheduled Notification Que clean up.
All, please, give your feed back: your experience, knowledge on the subject, etc.
Thank you.

Interesting situation with outlook

Hey all has anybody else experienced this? when I open up outlook to check emails or text messages outlook's background doesn't load up, I can see on the top bar the name of the inbox I'm currently supposed to be looking at but the background is my today screen. I can send new messages but basically I can't read new ones if I try to touch the screen I activate whatever I hit on my today screen. I took off all my today screen plugins, but nothing, if anyone has any suggestions or ideas, I would appreciate it.

Sounds obvious and stupid but have you turned the device (hold power button) and back on again? This happens to me sometimes and after a reboot it seems to fix it.

Yeah I do the same thing, the only problem is that it's doing it too often and it's a pain to reset my phone 3 - 4 times a day.

Oh i see. Mine has never done it that often, sorry I can't help any more!

You have a software conflict somewhere - it will be v hard to track down. You could try uninstalling some especially if you have spb products installed as they often are the culprits. But you probably need to hard reset and add programs one by one to find the one.

I had this problem in the past (with old ROMs though)
The way I managed to overcome this is to keep outlook running in the background.
I'm using the Spb Pocket Plus and in the "close button configuration" I added the outlook to the exceptions list. By keeping it running, it always come back with a complete screen (not just top and bottom).
But then again, I didn't see this behavior since I upgraded the ROM; I'm on the 2.26 ROM now.

@gilbnx
Yeah was just thinking of doing something like that more or less.
@meschle
The only spb software I have is spb backup, I always works at first it's just at some point after I've been using the system for a while that it starts doing it. It could be after opening some application and I just haven't noticed. I'll try opening one application at a time and checking to see if it stops working after a certain one, yes tedious I know, but tell you the truth I don't use a whole lotta applications, so I'll stick to the ones I usually open up.

For those of you having this problem, if you are using smartkey, make sure outlook, MMS, Text messaging, are set to be ignored, just like it is in the default smartkey.ini. I had altered the ini and taken out all the programs since I wanted them all to close, but I noticed it started happening after closing outlook with smartkey, so I put it back on ignore and haven't had any problems since (and I hope I won't).

Universals gone wild!!! Repeating alarms etc

My exec has gone nuts.
First, alarms stopped displaying the message boxes, and as I couldn't dismiss them, they went on for ages.
Now, I get my reminders through from weeks ago through, with no messages, all at once, in a mishmash of notification beeps, and voice command reading them out.
I really have no idea what could be wrong.
I haven't changed anything.
I'd love a fix which doesnt involve hard reset (and yes, I have soft reset it!)
Thanks,
Skelly
[edit by V: please try to use a useful topic title, and post in the right area ]
___________________
XDA Exec, O2, WM5

Check out MamMaid it has an option for clearing notifications.

Read my step by step guide in the following thread to fix your device - this guide does NOT involve a hard reset.
http://forum.xda-developers.com/viewtopic.php?t=60036
And do not use the built-in Clock/Alarm application any more, it is VERY buggy and almost certainly what has caused your problems (as it did on mine).

Thanks: it helped me also: at last solved a irritating problem. You are a great help!

What do people recommend as the best alarm clock program to use?
My alarm clocks stopped working so relying on the Universal atm to wake me up every morning but today one of my calendar reminders didn't go off and I nearly missed a 3 hour conf call (tragedy I know!!!).
G

I'm using SPB Time, a bit bloated at over 3MB just for what is basically a clock but it has everything you will need (clock, WORKING alarm, stopwatch, etc).
Seriously people stop using the built in clock/alarms app completely, it messes up your notifications queue over time making reminders not go off properly and all sorts of other unpleasant bugs which just get worse as your device gets older, which is why I suspect we are seeing more and more of these cases a year after the device was originally released.
It is unknown at this time whether or not these bugs are fixed in later WM5 ROM releases, although I suspect not...

skelly said:
My exec has gone nuts.
First, alarms stopped displaying the message boxes, and as I couldn't dismiss them, they went on for ages.
Now, I get my reminders through from weeks ago through, with no messages, all at once, in a mishmash of notification beeps, and voice command reading them out.
I really have no idea what could be wrong.
I haven't changed anything.
I'd love a fix which doesnt involve hard reset (and yes, I have soft reset it!)
Thanks,
Skelly
[edit by V: please try to use a useful topic title, and post in the right area ]
___________________
XDA Exec, O2, WM5
Click to expand...
Click to collapse
Ho YES I know this problem well!!! It is a total Pain in the But.
I have tried most tings and the only thing thatw orked for me was a hard reset a finaly a ROM upgrade seems to have stopped the problem coming back AGAIn & AGIN . Well for now anyway.
I think SL9 has the answer I have not tried the exact method given But Did try Memmaid and It did not help. I did not however deselect the alarms first and did not do a Soft reset straight after. These may be the secrets to success. I have not had the problem recently (please NO MORE) so unable to try SL9 method but seems to have worked for many
Here is SL9s method Good luck and thanks to SL9
================================
Yes, I had this problem also. You can perform a hard reset, that will solve it but then you loose all your data and it is a pain! So I spent all day trying to find out how to fix it without doing a hard reset, and here are the results:
1. Open the Clock & Alarms app, and click on the Alarms tab. Make sure everything is unticked and unselected.
2. Install and launch MemMaid (http://www.dinarsoft.com/ - Note: MemMaid is shareware that expires after something like 30 days, or you might use another app which allows you to edit the notifications queue), and then press the Jump To softkey and click on the the Notification Queue option.
3. Press the Find Duplicate button, and make sure you say yes to deleting all duplicates.
4. Now you have to scroll through the list slowly, you must find all the ones which have this text in them and check the tickbox: \Windows\clock.exe.
5. Now you have located the rogue alarm notifications and ticked them, press the Delete button and confirm in the next step. Make sure you have NOT ticked/selected any other notifications except the clock.exe ones before you do this step, otherwise it can easily make your phone stop working!
6. Soft reset your device. When it has finished booting, you should notice that it doesn't vibrate madly with alarms for 20 minutes like it used to do before, and you should have a flashing green LED on the right instead of orange
7. Stop using the built-in clock & alarms app if you don't want this to happen again - it is too buggy! Find a replacement alarm app, there are loads of free ones out there!
Last edited by sl9 on Wed Aug 23, 2006 17:50; edited 1 time in total
===================
Thanks again to SL9
Condex

Need help.. got problem with my alarm..

guys need help..
got one annoying problem bout my alarm... ive seem to disable all my alarms but the phone still recognizes my old settings.. how to explain this errr,,, well previously ive set the alarms at 6.00 am , 6.25 am and 6.30 am... after a short while the phone hangs so i soft reset it, then after that i've set the alarm to 7.00 am,7.25 and 7.30 am, (max 3 alarms can be set) but the prob is everyday the phone alarms set off at the 6++am time... even tho ive change them all to 7++AM and there is no way to disable them since only the 3, 7oclock alarms is avaible on the list...
so now i have a total of 6 alarms...
guys how to fix this without hard resetting,,,
TQ,

Do these 'phantom' alarms show up in your notifications queue?
You need something like Memmaid or Scarybear's Checknotifications to see these.
Look at the ones called calendar xxx or clock xxxx
Make sure from the descriptions that these are notifications you want to keep, if not delete them, also delete any duplicates.
DON'T delete any other notifications, these could be needed by the system to function correctly.
When I had similar alarm problems, I did this and found I had around 500 alarm/reminder notifications, some going way back, and some for May 2047!
When I got rid of these and the duplicates, it came down to around 40 and my alarms and reminders worked properly again.
Hope this works for you

ive downloaded Scarybear's Checknotifications but i do not know which to delete..zzz calender.exe or clock.exe?

Frostlance said:
ive downloaded Scarybear's Checknotifications but i do not know which to delete..zzz calender.exe or clock.exe?
Click to expand...
Click to collapse
I am more familiar with SKtools and Memmaid than Scarybear, but the ones to avoid deleting are any titled repllog. If Scarybear has a delete duplicates function then you should be safe to use that. Entries for alarms may have a title such as windows\clock.exe. In sktools I can click such entries and it tells me what alarm it is and when it's set to go off (not sure about Scarybear)
Good luck
Mike
PS Get a good Full backup programme like SPB Backup and then you would not need to worry about deleting the wrong thing.

When you first run the app, it marks all the duplicates in red, just press clear to get rid of those.
The ones to look at individually are the ones like:
Clock.exe - then scrolling to the right, these should have an entry under dialog title like "daily alarm" and then dialogue text like "Alarm: Wake up 10.30"
Make sure that all these are for alarms you want, delete the ones which aren't.
the others are:
Calendar.exe, in the dialogue title these say POOM xxxx and in the dialogue text, there is a description of the appointment you have set the reminders for.
You should be able to tell from these if any are in the past ie reminders you thought you had dismissed, or indeed from ridiculously in the future like 10 years time.
Delete the unwanted ones of these.
Also worth checking are Tasks.exe entries
Plus any other apps you have which can put alarms on the system eg some notes applications
Then use the exit button to exit checknotifications and see if this improves things.
The problem seems to arise (on my device) in 2 ways.
Firstly, in the past a reminder will have come up, and I think I dismissed it, or while I was dismissing it, something else happened on the system, incoming call, another alarm, crash, anything really, and somehow the dismiss instruction never seems to have 'taken'.
The other way is using Windows mobile live client. It seems to put notifications in every time you soft reset, so you can end up with a lot of WLM duplicates. It also seems to sync a whole load of old 'stuff' to the device, together with old notifications
If you find this helps, do consider getting Memmaid or SK Tools. I use Memmaid every day to clear junk out of my device. It's not free like checknotifications, but it does a whole lot more and has repaid the investment many times over (they do a free trial). SK Tools does even more, but is also I think easier to do something 'silly' on.
Also, the one thing I couldn't do without is a good backup program. I always take a series of backups. That way a hard reset needn't mean hours of re-installation. Usually about 20 minutes max.

all right..
I did as you said and i think it worked.
Thank you so much for helping.

No probs.
Remember, this isn't usually a 1 off problem. If it does fix things, keep an eye on that queue for a while and make sure things don't build up again.

All of a sudden, alarms don't work!

Background:
ATT8525 with the ATTWM5 Rom
All of a sudden no alarm will work on this device. I have SPB Time and City Time Alarm both installed and ever since Saturday morning my daily alarms do not sound.
Thought it was a fluke at first but I've been playing with it tonight trying several different times and nothing seems to work. I even tried the built in WM5 alarm and it didn't work either.
This isn't related to the no sound issue I've inquired about in the past as right now all my OTHER sounds are working.
I've also done multiple soft resets and I've checked and double checked that my phone has the correct time and time zone.
Any ideas?
Thanks

It sounds like you have some duplicate/out of date/bad notifications in your notifications queue.
First do a full backup (just in case) then:
You need to use a 3rd party app such as Checknotifications (free), Memmaid, SK tools.
Use one of these to eliminate duplicate notifications and see if things start working again. If not, unfortunately you will have to go through each one manually. Look at the ones beginning Calendar and Clock. Make sure that the time/date for these is in the future. Delete the ones that are not. Leave alone the other notifications some of these are necessary for other processes.
See if it works now.
If not, you may have to do a hard reset. Good luck!

marisa4755 said:
It sounds like you have some duplicate/out of date/bad notifications in your notifications queue.
First do a full backup (just in case) then:
You need to use a 3rd party app such as Checknotifications (free), Memmaid, SK tools.
Use one of these to eliminate duplicate notifications and see if things start working again. If not, unfortunately you will have to go through each one manually. Look at the ones beginning Calendar and Clock. Make sure that the time/date for these is in the future. Delete the ones that are not. Leave alone the other notifications some of these are necessary for other processes.
See if it works now.
If not, you may have to do a hard reset. Good luck!
Click to expand...
Click to collapse
Thanks for the reply.
Memaid did the trip as it was a built up queue of notifications. Not sure what caused that but at least it's fixed without having to do a hard reset.
This never happened with my 8125, strange.
Also, this fixed a couple of other issues I was having.
My 8525 had stopped pairing with my automobile's BT and it did this morning, and the last few days the phone and stopped doing the first active sync of the day (at 0700) automatically. It did this morning.
Looks like I may check into purchasing Memaid. It's a handy little program.

I have to admit, it's one of the first apps on any device I own. Especially now that it has a reg editor too.
Beware, you may need to do the notifications queue clearout quite frequently, just keep an eye on it for a day or 2. I've found that if you use windows live mobile, this puts 3 or 4 duplicates on your system at every soft reset! Don't you just love microsoft applications?

marisa4755 said:
I have to admit, it's one of the first apps on any device I own. Especially now that it has a reg editor too.
Beware, you may need to do the notifications queue clearout quite frequently, just keep an eye on it for a day or 2. I've found that if you use windows live mobile, this puts 3 or 4 duplicates on your system at every soft reset! Don't you just love microsoft applications?
Click to expand...
Click to collapse
Gee I wonder if the iPhone's have to do this?
Sorry, couldn't resist.

They probably would have to if they were allowed to install 3rd party applications!

marisa4755 said:
They probably would have to if they were allowed to install 3rd party applications!
Click to expand...
Click to collapse
Sharp answer Marisa4755 - I also think texas should be punished for that uncalled for remark; I'm thinking 6 month ban (I always was too lenient )
Mike

Nah
I'll just retaliate by posting on the iphone-developers forums

marisa4755 said:
Nah
I'll just retaliate by posting on the iphone-developers forums
Click to expand...
Click to collapse
Oh thank you.
At first I thought you all were just ganging up on my since I'm across the pond from you all. <G>
Kinda back to my original question.
What is up with the Notification Queue? I currently have 37 "time based" entries. A few of these are obvious. But I have a whole mess named "\\.\Notifications\NamdedEvents\Scripts:0x0023B3D0" and a couple of dozen more with similar hexadecimal(?) endings.
They are all "dated to run" on September 26, 2007 at various times of the morning.
The thing is, nothing is in my calender on that date. So what in the world are those entries? Are they safe to delete?
Thanks

Don't mind us, if you play with Windows mobile, you just have to have a laugh as often as possible (makes up for all the crying!).
On your alarms/reminders/notifications etc, do you have the setting on for 'flash light'? If so, do you have this set for no limit? If so, I think these are your scripts as above. If they are set as no limit, I think they go on for around 40 days or so. So probably they relate to an event 40 ish days before 26 September.
They might also relate to some other software you are running. I understand TomTom puts some strange notifications in.
If so, they are PROBABLY fine to delete. As long as you do a full backup before touching them, then if it all goes pear shaped, just restore your backup.
Whatever you do, don't touch the repllog.exe entries. These relate to activesync and if you delete these, you will have a lot of trouble with synchronising.
If, however you do accidentally delete a repllog file that you should't, Mike has written an excellent guide on how to get it back!
http://forum.xda-developers.com/showthread.php?t=302459&highlight=repllog.exe+activesync

marisa4755 said:
Don't mind us, if you play with Windows mobile, you just have to have a laugh as often as possible (makes up for all the crying!).
On your alarms/reminders/notifications etc, do you have the setting on for 'flash light'? If so, do you have this set for no limit? If so, I think these are your scripts as above. If they are set as no limit, I think they go on for around 40 days or so. So probably they relate to an event 40 ish days before 26 September.
They might also relate to some other software you are running. I understand TomTom puts some strange notifications in.
If so, they are PROBABLY fine to delete. As long as you do a full backup before touching them, then if it all goes pear shaped, just restore your backup.
Whatever you do, don't touch the repllog.exe entries. These relate to activesync and if you delete these, you will have a lot of trouble with synchronising.
If, however you do accidentally delete a repllog file that you should't, Mike has written an excellent guide on how to get it back!
http://forum.xda-developers.com/showthread.php?t=302459&highlight=repllog.exe+activesync
Click to expand...
Click to collapse
Thanks. I think the message notification thing is the reason. I do have the flash light checked and their seems to be a correlation between the entries and the number of messages I currently have in OL.
Thanks again for all the help!
Hopefully I can return the favor sometime.
David

I hope by now you have solved your (our) problem. I was able to fix my problem by installing a free program from Burr Oak called Wakeup Tweak.
I never ever RAN the program - I just installed it. During installation, it asked me if I wanted to use default notifications and I said yes.
I then tested an appointment alarm (before running Wakeup Tweak) and the alarm worked.

Hey there... I used to have the same problem under WM5 (I think it was a known fault and the idea was to fix that for WM6). My reminders didn't work, and my alarm, initially came on but I could not dismiss it, and so came back on the moment I switched my phone back on etc. I found that using Pocket Mechanic and then deleting all 'clock.exe' entries i which have the word obsolete added under the type column solves the problem. I think some people have experienced problems doing this and it messed up their device. I, personally, never had any problems but you may want to back up things just in case. Again, it's not a long-term solution and I had to do that every couple of weeks. The deleting of duplicate notification did not, for me, restore reminders etc. I have to say ever since I upgraded to WM6 I have not had this problem so I guess Microsoft fixed this issue.