Hi,
My OS upload was terminated unexpectedly, now my XDA starts with "Upgrading..." .. Is there a way to upload OS via Serial or do I HAVE to use the SDCard to upload ?? Thanks a bunch!!
Zorro
i had that happen to me recently and...
all i did was plug it in back in the cradle
and run the setup (upgrade) again.
and it just restarts.
if that dont work, then you Have to use the bootloader method
Related
where do i get the XDA manipulator
http://wiki.xda-developers.com/index.php?pagename=XDAmanipulator
Thank you very much LumpiStefan for your timely response and for the link to get the XDA manipulator, i have been looking for it for so long. THANKS DEVELOPERS
I too appreciate the link, I have been searching for this for ages. Cheers.
.......Ib a n e
I really appreciate the link thanks
BR
wallaby usb flashing
hi there ,,can anyone tell why when i enter usb flash mode i cant flash via it wheni try to run a upgrade program it says plug in yor pda and on the pda screen all i get is usb flash mode,,connect usb cable now... but it is lso in my device manager i see my pda as a windows ce devices so what the hell is going on ?
pls dont tell me only way is via sd card surely it can be done via usb lead if so please can some post a step by step on how to flash via usb as i did so already from pc2002 to win2003 using the rom from xda developers and now i get a logo Ozup and underneath says ,,this os image is meant for microsoft employees or technicians bla bla bla
but i can enter boot loader fine access all the menus in bootloder my bootloder version is v5.15
pleaaaase someone help me
There are two possibilities to flash a device:
1. In Bootloader via SD Card
2. Normal booted device via Active Sync
But i do not know what you mean with USB Flash Mode
Stefan
thanks for replying back now i have new problem
i have a big problem and i think your the only person who can help me my problems occured when i went to flash my wallaby device with this rom ftp://xda:[email protected]_ENG.exe/
i wish i never bothered the device was perfectly running fine until i flashed it with this via usb it all was a succes when i done a hard reset i got a screen with a oz up logo and underneath it says "microsoft internal use only" this operating system image is meant for use only by microsoft employees and contractors ,,and the crazy thing is i cannot enter my bootloader which was v5.15 so i can flash it via sd card its vanished no bootloader only that screen and on the bottom right corner it says ,,g32s54,v4.08,3.04 when i plug it in usb all i get is a unknown device and i cannot flash it so please if there is a way even if its pretty technical i would be honoured if you can help me out i would be very grateful if u cn show me a way of getting the bootloader back many thanks
still no bootloader on my wallaby device
hi i,m really upset if i can only get acces to the bootloader i can atleast flash it via sd card so please if theres a way of getting back the bootloader or somehow flashing it back please any help would be appreciated
radio stack
had same sort of problem this is how i fixed it go here
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
don't use the 4.16 use the rs 4.21 when i did the upgrade i was then able to connect to active sync then changed the rom try the special rom 1.2
hope this helps
mate the problem i have is that i cant acces the bootloader for me to do anything its gone and this happened after using that dodgy rom
all i want to no is there a way of putting back the bootloader on to the device as its not there its been somehow erased after the flash i done
mate if you try what i said to try this should help you to connect your phone back to your pc then you can change the rom from there you shold get bootloader back when you put a new rom on
i have an xda IIi an it say's serial v1.01 when i try to put it in the charger it say's usb v1.01 but activesync 4 will not detect it but it does connect to my pc without activesync but i can't install any thing on it. i have downloaded the original software from the o2 website but the installation instructions say it needs to be connected to activesync. what do i do
Hmm...Seem to me you are in bootloader mode serial connection version 1.01 .. Try checking the buttom. As this mode will only come if you press power+reset+navigator buttom.
i have tried soft reset and hard reset but i just can't do anything with it
chill..
download the rom image from o2 here is the link,
http://www.my-xda.com/xda2i_soft.html
put the device into bootloader and put into the cradle and let it do it's magic
simple!
PS, i problem like it i killed mine by messing up the rigistry i was screwed so i did that above and all was okay....main thing is not to panic always think u have the garuntee from o2 so u can take it back...so take it ez!
Help Tryed updating the ROM lost power now phone in bootload mode any time try flashing i get a 120 country code error
use MaUpgradeUt_noID.exe update again!!
go to the xda website from O2 and download the rom connect you xda to your computer then run the rom on you pc and it will install it's self i had the same problem and this worked fine :lol:
I had a problem while flashing to the 1.04 radio ROM... Basically, my computer bluescreened with an ActiveSync USB driver error (IRQL_NOT_LESS_OR_EQUAL), they're ugly ones.
I had to take the battery out and power the unit back on, it stuck at USB 1.02, but I used the supplied MaUpgradeUt_noID.exe tool and it picked it up fine and is currently flashing (again).
I hope my PC doesn't reboot the sceond time round... If so, time to find someone else with a PC I can use in these University halls
i have a chinese rom version of the atom exec. i have managed to sync it to my pc. i have also loaded the latest english rom. when i go to run the system upgrade utility, it says it is the wrong country for this rom. when i put it in bootloader mode, and try fails and says i need to connect using usb and sync pc first. However, when i first put it in to bootloader mode, it says USB connected, waiting for download command. on the pc, it says connection error and that the phone is not conected. i am stuck. can anyone help me? am i missing something simple? thanks in advance.
Hi Wizards,
Im having a Qtek 9100 and using a ROM cooked by Mfraazz. The phone application seems to hang and i have to reset in order to make it functional...the problem does not end here. When the phone boots up, the start menu bar is not visible...I have to hard reset my device 3 -4 times..thats whn the start menu is visible..
I have only one application(Good Link) running...plz help me guyzz
it is time to donate to XDA-developers!
Just reflash the ROM, friend. Seems to be a bad flash to me.
deleted this post
wiztek said:
Hi Wizards,
Im having a Qtek 9100 and using a ROM cooked by Mfraazz. The phone application seems to hang and i have to reset in order to make it functional...the problem does not end here. When the phone boots up, the start menu bar is not visible...I have to hard reset my device 3 -4 times..thats whn the start menu is visible..
I have only one application(Good Link) running...plz help me guyzz
Click to expand...
Click to collapse
try another cooked ROM or an official one and see if problem persists...
the mfrazzz crossbow reloaded made my kjam hang on the bootloader as well n my fone cant b detected by active sync either plz help how m i suppose to flash another rom wen active sync itself dont detect my rom
z0d1ak said:
the mfrazzz crossbow reloaded made my kjam hang on the bootloader as well n my fone cant b detected by active sync either plz help how m i suppose to flash another rom wen active sync itself dont detect my rom
Click to expand...
Click to collapse
Rom has got nothing to do with Activesync not detecting your phone,it's most probably the problem of Activesync application or your USB cable not establishing connectivity.Check the usb connectivity for problems.To verify the connectivity,check if it gets charged via usb connection.
secondly,get your phone into bootloaders and connect it to your Pc via usb cable,see if usb appears at the bottom of the bootloader mode (multicolor screen),if it then it's connecting.
You don't need Activesync for flashing a Rom to your phone,it's done via usb cable,and while flashing activesync is automatically turned off by the Ruu.So if you are able to establish connectivity via usb cable in bootloaders (multicolor screen) you can flash to any Rom.
Cheers