i have a chinese rom version of the atom exec. i have managed to sync it to my pc. i have also loaded the latest english rom. when i go to run the system upgrade utility, it says it is the wrong country for this rom. when i put it in bootloader mode, and try fails and says i need to connect using usb and sync pc first. However, when i first put it in to bootloader mode, it says USB connected, waiting for download command. on the pc, it says connection error and that the phone is not conected. i am stuck. can anyone help me? am i missing something simple? thanks in advance.
Related
where do i get the XDA manipulator
http://wiki.xda-developers.com/index.php?pagename=XDAmanipulator
Thank you very much LumpiStefan for your timely response and for the link to get the XDA manipulator, i have been looking for it for so long. THANKS DEVELOPERS
I too appreciate the link, I have been searching for this for ages. Cheers.
.......Ib a n e
I really appreciate the link thanks
BR
wallaby usb flashing
hi there ,,can anyone tell why when i enter usb flash mode i cant flash via it wheni try to run a upgrade program it says plug in yor pda and on the pda screen all i get is usb flash mode,,connect usb cable now... but it is lso in my device manager i see my pda as a windows ce devices so what the hell is going on ?
pls dont tell me only way is via sd card surely it can be done via usb lead if so please can some post a step by step on how to flash via usb as i did so already from pc2002 to win2003 using the rom from xda developers and now i get a logo Ozup and underneath says ,,this os image is meant for microsoft employees or technicians bla bla bla
but i can enter boot loader fine access all the menus in bootloder my bootloder version is v5.15
pleaaaase someone help me
There are two possibilities to flash a device:
1. In Bootloader via SD Card
2. Normal booted device via Active Sync
But i do not know what you mean with USB Flash Mode
Stefan
thanks for replying back now i have new problem
i have a big problem and i think your the only person who can help me my problems occured when i went to flash my wallaby device with this rom ftp://xda:[email protected]_ENG.exe/
i wish i never bothered the device was perfectly running fine until i flashed it with this via usb it all was a succes when i done a hard reset i got a screen with a oz up logo and underneath it says "microsoft internal use only" this operating system image is meant for use only by microsoft employees and contractors ,,and the crazy thing is i cannot enter my bootloader which was v5.15 so i can flash it via sd card its vanished no bootloader only that screen and on the bottom right corner it says ,,g32s54,v4.08,3.04 when i plug it in usb all i get is a unknown device and i cannot flash it so please if there is a way even if its pretty technical i would be honoured if you can help me out i would be very grateful if u cn show me a way of getting the bootloader back many thanks
still no bootloader on my wallaby device
hi i,m really upset if i can only get acces to the bootloader i can atleast flash it via sd card so please if theres a way of getting back the bootloader or somehow flashing it back please any help would be appreciated
radio stack
had same sort of problem this is how i fixed it go here
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
don't use the 4.16 use the rs 4.21 when i did the upgrade i was then able to connect to active sync then changed the rom try the special rom 1.2
hope this helps
mate the problem i have is that i cant acces the bootloader for me to do anything its gone and this happened after using that dodgy rom
all i want to no is there a way of putting back the bootloader on to the device as its not there its been somehow erased after the flash i done
mate if you try what i said to try this should help you to connect your phone back to your pc then you can change the rom from there you shold get bootloader back when you put a new rom on
i dwonloaded and installed T mobile rom from this site
My device is Q tek 1010
i cant install any other rom as this error message appears each time i try to upgrade the rom
"Please find the error message attached"
I need help as the message read the device is not connected however its will connected and active sync can see it fine
Please advice what to do
Regards
The ROM you have currently installed prohibits flashing via Active Sync. You have to flash via SD-Card and Bootloader.
Take a look here how to do this....
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
HTH
Stefan
I followed instructions (http://forum.xda-developers.com/showthread.php?t=244549), and I executed 3.17.03_ENG.exe after xdaunlock.exe failed.
My device is now unusable, some error occured regarding usb connection and now all I have on pocket pc is upgrading bar with 0%.....cant reset cant do anything?!?
Please help!
If I understand corectly I need to put boot on my sd card.....
look here
this might help http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
thnx....and....where can I find rom image?
http://www.romkitchen.de/
no bootloader on wallaby
hello again ,,to jay05 thxs for replying back but u dont seem to understand what i am saying i will say it more clearly hopefully someone can help ,
ok there is no bootloader on the device its been erased when i do a hardreset nothing happens so can someone please tell me how to put back the bootloader on the device ,,its impossible via sd card and when i connect it via usb cable all i get in my device manager is a usb device as"HTC USB SYNC"
ok so there must be software that can somehow flash this pda as the computer recognises it as a htc usb sync ,,i done a search on google and found several software that runs on similar setups like the treo but none for wallaby so please someone there must be a way to upload the bootloader back to the device via usb cable pls someone help me out i also tried the xda developer tool pnewbootloader no use nothing happens
there must some kind of special HTC software that can flash the chips on the pda similar to the jtag technique but thru usb as again i repeat my comp sees the pda as a htc usb sync
i hope someone can help
many thanks and a happy new year
So got my Dopod 838pro running windows mobile 5 and will upgrade it to windows mobile6 with any luck, at the moment im trying to upgrade the boot loader to SPL (Bootloader) version 2.10.Olipro (HardSPL v7) and im following this very handy guide http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27
however i get to the very end where its supposed to flash the new boot loader and it sits there for a while until the updater utility comes back with ERROR [260] Update Error.
Which informs me that i should check to see if the phone is connected to the computer via usb, which it is.
It must connect to the phone cause it actually starts the process of trying to update the boot loader, i see it on my phone. It goes to a red, green and blue screen. Which says:
Herm1000
IPL-SSPL by Des
Herm100
SPL-1.09.ds
USB
The only option i have here is to press exit on the updater utility, and start again.
Nothing else happends after this.
Im running Windows Vista 64bit, have also tryed this guide
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
Still no solution.
Currently i have:
IPL 1.01
SPL 1.06
Have also restarted my computer in between trying different things.
Anyone ever had this problem or know a fix?
Thanks in advance.
error 260 is an open port error. try a different usb port, disable antivirus and firewalls, or if avaiable try on a different pc, xp if possible.
heh, works on my XP machine.... >< Thanks.
Edit:
I tried a differeny USB port on my vista machine and that didnt work. I also closed absolutely everything and that didnt work either.
I cannot switch on my device. When I tried hard reset it stucks at bootloader. so tried to enter boot mode (red green blue screen) and reinstal rom. it starts and look it works properly but instalation of new room is not completed (error 270). have read simmilar topics in forums and it seems it´s because device is not connected with activesync. any ideas how to fix? please don´t say I have a brick
Cannot connect
Use the original cable supplied by HTC. There seems to be an issue with other cables.
sanjeev
Are your really using ActiveSync or Mobile Device Center?
In bootloader mode when connected via USB, can you read "USB" on the Bottom of the Display?
to both questions I can say yes. but nothing happens. it seem pc doesn´t recognize device.
ypsilonq said:
to both questions I can say yes. but nothing happens. it seem pc doesn´t recognize device.
Click to expand...
Click to collapse
Opens activesync at the PDA and the go to connections settings. (menu->connections).
See if USB connection is selected there.
Cheers
thank you. I tried what you suggest but no change :-(
is the error you got when flashing the original HTC ROM?
if not download it from the official HTC site and then flash it using SD card flash (for more info about see the wiki)
finally fixed!!!!!!!!!!!!
I find original rom (t-mobile) and followed instructions from link provided by y_bother. big thanks !!!