i dwonloaded and installed T mobile rom from this site
My device is Q tek 1010
i cant install any other rom as this error message appears each time i try to upgrade the rom
"Please find the error message attached"
I need help as the message read the device is not connected however its will connected and active sync can see it fine
Please advice what to do
Regards
The ROM you have currently installed prohibits flashing via Active Sync. You have to flash via SD-Card and Bootloader.
Take a look here how to do this....
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
HTH
Stefan
Related
Can anyone help tried to upgrade my XDA II and device got disconnected from cradle, when powering up just displays (serial v1.06) and won’t continue to boot.???
Put it back in the cradle, it should display usb on the xda 2, just start the upgrade again.
Ta for your reply HOWEVER!!
The computer can not detect the XDA and is showing un known USB device?
Any more suggestions?
If the PDA screen shows "Serial 1.06", try to put in cradle. Is the screen changed to "USB 1.06"?
If so, kill ActiveSync (wcescomm.exe) and try to run update again...
Receiving Error message 100
The rom image you are trying to use is not designed to work with your pocket PC, please check the vendor web site and download the correct ROM update.
WHICH ROM UPDATE?
Please advise
Re: Receiving Error message 100
UKA said:
The rom image you are trying to use is not designed to work with your pocket PC, please check the vendor web site and download the correct ROM update.
WHICH ROM UPDATE?
Please advise
Click to expand...
Click to collapse
Message 100? And what's the name of this error message?
Xda_II Upgrade_V16050
Can you advise of any other upgrades that would work?
I think I have done it!
I have downloaded V172 and it seems to be upgrading.
I will keep you posted
It has worked
I was trying to install a previous version of softwear, I have know installed V172.
I will keep you posted
:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
HELP ME!!!! black display after ROM upgrade
I've about the same problem...
I tried to upgrade my XDA II ROM... I'm a novice!!! I think...
1. I putted my XDA in the cradle, started install application
2. the same error.... and now I've a XDA II with a black screen and i can read USB at the upper and V 1.
3. I tried to re-install the ROM upgrade, but everytime it try to erase the ROM and the response is always: error 112 CE ...bla bla bla.
4. upgrade software suggest me to do a reset and to re-install... it's a loop!!! without solution!!!
Can U help me???
I've hope?
....it's only a week i bought it...................
P.S.
Sorry for my very bad english......
Guys, what the upgrade says is VERY MUCH IMPORTANT!
In other way, nobody can help you... "Bla, bla, bla" is not so much helpfull...
Model ID Error
I having the same problem, my error message is MODEL ID Error Message 100. My mobile is Qtek 2020. XDA II
m wallabr boot loader is showing gsm error and ever since the radio has been off.wat do i do to bring it back,imean the gsm,cos i have tried turning it on but to no avail. is there any flash program i can use to correct this?pls hlp me.
Try this:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Stefan
pls i dont have any sd card at the moment
thanks for the site given,but pls i want to know if i can use this without the sd card.can i use the cradle?i.e active sync to run it?cos i need to fix up this stuff fast.the rom version of my ppc is 4.01.16,hope it wont be the wrong type for the flash software that i will use.
If you're device come up and you get activesync working, it should work also with the 4.01.16 ROM....
Stefan
i have a chinese rom version of the atom exec. i have managed to sync it to my pc. i have also loaded the latest english rom. when i go to run the system upgrade utility, it says it is the wrong country for this rom. when i put it in bootloader mode, and try fails and says i need to connect using usb and sync pc first. However, when i first put it in to bootloader mode, it says USB connected, waiting for download command. on the pc, it says connection error and that the phone is not conected. i am stuck. can anyone help me? am i missing something simple? thanks in advance.
Hi, just bought a qtek 2020i, i am trying to upgrade it to wm6.1 but no mather rom i use, it always get me error 112 witch says ce erase error in log file.
after searching and searching i only find one guy that solved this problem using a computer with windows me and activesync 3.7 without antivirus or firewall.
my quetion is:
to upgrade a 2020i's rom, activesync has to connect to pda in bootloader mode?
OCRAM00 said:
Hi, just bought a qtek 2020i, i am trying to upgrade it to wm6.1 but no mather rom i use, it always get me error 112 witch says ce erase error in log file.
after searching and searching i only find one guy that solved this problem using a computer with windows me and activesync 3.7 without antivirus or firewall.
my quetion is:
to upgrade a 2020i's rom, activesync has to connect to pda in bootloader mode?
Click to expand...
Click to collapse
First off, update your Activesync to 4.5. Activesync shouldn't "connect" when in bootloader mode, however you can flash ROMs if you're device is connected in bootloader mode. You can also run the RUU after installing the modified SPLs needed.
Ignoring the first issue of connection, you can't actually achieve your stated aim of upgrading an Alpine to WM6 anyway, no such ROM exists.
hi, i've found and download a rom of wm6.1 to alpine 2020i and also a wm6.5.
I've tried with the activesync 4.5 and still the same error, i dont understand why it wont erase the rom to install new one
i like to see this rom give mi link or info wher to find it. i well try to instal yt on my xda IIi
be2nzs
hi guys, i have problem to upgrade my alphine, i just want wm 6.5 runing on my device, can anybody help me ? i am sorry for my english.
Hello everyone!
I got a HTC Prophet with english windows mobile. I've wanted to install a german ROM, and used this:
http://www.handy-faq.de/forum/htc_p...ophet_touch_ix_rom_deutsch_download_1005.html
I've runned a .bat file and the installation startet. But then i closed the window with the installation insinde (undeliberate). and now the prophet won't load windows. it always stops at the boot screen, where the infos are:
IPL 2.15.0001
SPL 2.20.0001
I can run the BootLoader mode and connect the Prophet to my PC. on the left bottom it says "USB" but when I run the installation again it says "no device connected".
i got windows 7 ultimate in 32bit version.
I hope you can help me, 'cause it's the phone from my dad and i won't get him angry
Greetings from Germany!
Bianca
geffi said:
Hello everyone!
I got a HTC Prophet with english windows mobile. I've wanted to install a german ROM, and used this:
http://www.handy-faq.de/forum/htc_p...ophet_touch_ix_rom_deutsch_download_1005.html
I've runned a .bat file and the installation startet. But then i closed the window with the installation insinde (undeliberate). and now the prophet won't load windows. it always stops at the boot screen, where the infos are:
IPL 2.15.0001
SPL 2.20.0001
I can run the BootLoader mode and connect the Prophet to my PC. on the left bottom it says "USB" but when I run the installation again it says "no device connected".
i got windows 7 ultimate in 32bit version.
I hope you can help me, 'cause it's the phone from my dad and i won't get him angry
Greetings from Germany!
Bianca
Click to expand...
Click to collapse
Hi this is a easy problem to fix dont worry but first u need to read this http://forum.xda-developers.com/showthread.php?t=353547 you need to hardspl your device first then install the NVID rom in the link read the recovery solutions carefully oh and about active synce try this
Go in to Active Synce settings and uncheck allow usb connections that will help to detect your device when flashing the NVID rom after that just use any flashing tool to install the rom on your device problem solved just read the link if u dont understand as this happened to all of us before so we understand how u must feel
Hope this helps
Heya and thanks for your answer!
I did read the terms of use in the post u linked, but I got always the same problem:
No device is found. on the BootLoaderScreen it says "USB" and Windows 7 detected the Mobile Phone.
But the HardSPL didn't found the phone
I try to take the battery out and put it in after one minute, but it didn't work
geffi said:
Heya and thanks for your answer!
I did read the terms of use in the post u linked, but I got always the same problem:
No device is found. on the BootLoaderScreen it says "USB" and Windows 7 detected the Mobile Phone.
But the HardSPL didn't found the phone
I try to take the battery out and put it in after one minute, but it didn't work
Click to expand...
Click to collapse
Did you try flashing the NVID - AKU 2.* WM5 rom for recovering your Prophet on your device first then hardSPL your device? you need to install the rom first then hardspl it after that flash any other rom here http://www.4shared.com/file/57952591/3955ed98/NVID_RUU.html?dirPwdVerified=2948f2e flash this to your device and remember to uncheck allow USB Connections in active sync and just it should work if u still need more help al be happy to help you out and since ur using windows 7 use this tool to flash any rom to your device ok http://forum.xda-developers.com/showthread.php?t=534707 since am using both vista and xp and they work well so remember flash the NVID rom first then hardspl and try flashing back the rom you wanted to use on your device ok
hey!
i installted Windows XP and then load the HTC Prophet in BootLoaderMode.
I do HardSPL and it works. Then I install thisNVID. The phone rebootet, but windows didn't load. when i try to install the rom (i posted the link in first post) but it says already, that no device is connected.
the phone didn't load windows
geffi said:
hey!
i installted Windows XP and then load the HTC Prophet in BootLoaderMode.
I do HardSPL and it works. Then I install this NVID. The phone rebootet, but windows didn't load. when i try to install the rom (i posted the link in first post) but it says already, that no device is connected.
the phone didn't load windows
Click to expand...
Click to collapse
Sorry but first you need to recover your device by first installing the NVID rom and good u have windows xp did you did what i said about active sync uncheck allow usb connects then flash the NIV rom then use lazytool thats what i use on my windows xp to flash the rom u wana use what happened when u try to install the NVID rom? first you must manualy go too the bootloader menu in other to flash it you know reset the device and hold both the commanager and camura button until you enter the bootloader menu then flash the NVID rom if it works then do a hardspl then flash any roms using lazytool it should work when u said the phone rebooted but windows did not run what did you see on the screen? after the reboot? also the NVID rom is windows mobile 5 so you device should boot up windows but al look into this for you ok
PS this is important you should know that your device is G3 or G4 and from the looks of you spl it looks like a G4 device this is very important beouse if u flashed with G3 you can damage ur device but dont worry the guys here have managed to fix this so if ur flashing any rom use the G4 option ok but please look over these instructions http://forum.xda-developers.com/showthread.php?t=353547 as they helped me when i had the same problem
I just Private message you check ur inbox