The Radio part doesn't work, and I can't sync. How can I load th radio rom? Wallaby bootloader 5.15 gives me GSM error. I don't know what to do.
Can someone help me?
Thanks
Esteban
Do this it will solve your problem
-----------------------------------------------------
http://xda-developers.com/repair.zip
I blew my bootloader some how and spent some time modifying the pnewbootloader source code to make it work for WM2003 ROM version 4.01.16
I took original source code by itsme and added version and address information for ROM 4.01.16
Use this in conjunction with a valid 5.15 bootloader image to downgrade your bootloader imaget to 5.15 from 6.22 or 5.22 or 5.17
type pnewbootloader_40116.exe bootloader_v5_15.nb0
to apply the bootloader.
FLASH AT YOUR OWN RISK. This program uses defined ROM addresses and will only work with known ROM versions. There are some basic checks to prevent damage.
Fixbootloader don't work
I have T-Mobile ROM 4.01.16 with bootloader 5.15 probably locket by this T-Mobile ROM (I can't flash any other ROM and original pnewbootloader whrite message "Unable to find flash info offset, cannor disable bootloader writeprotect")
When I trying to start you updated pnewbootloader, my WinXP popup a message
"The application failed to inicialize properly (0xc0000135). Click OK to terminate the apllication"
What should it be?.. :?:
This application needs ActiveSync and also the "itsutils.dll" to be located in the same folder as teh EXE.
Which version of XP are you using. I built it on a XP pro SP1 box.
I have exactly the same: WinXP Pro SP1
I run in cmd "pnewbootloader_40116.exe bl515.nb0"
from the folder, which contain
pnewbootloader_40116.exe
pnewbootloader.exe
itsutils.dll
pput.exe
bl515.nb0
Activesync 3.71 i connected to my XDA.
Cant really say why you are having this problem. But one this might help.
Seems like your .net framework is either old or not working.
Go to windows update to download and install the 1.1 .net framework or visit
http://www.microsoft.com/downloads/...e3-f589-4842-8157-034d1e7cf3a3&DisplayLang=en
Thank you for your help! The problem was realy in .NET version.
I had 1.0 installed on my WinXP.
After updating to .NET 1.1 your program is working fine. And it seems, that it updated my bootloader. Its output was
pnewbootloader.exe bl515.nb0
in FindFlashOffset (or somthing like this)
protection found at 8c0d62c8
result: 00000000 00000000
After that my device is still bootable and boot my 4.01.16
But I still can't update my ROM to 3.17.03 through XDATools..
Can anyone help me? plzzzz!
are you using xdarit to write your image to SD card ?.
You have to use SD card flash method to upgrade/downgrade the ROM.
Download XDarit and use that to write the image (.nb1) to SD card in 1k header format.
Then reset and boot your pda after holding the power button. You will see a menu which will let you flash your PDA with the image on the SD. Search for xdarit on the forum. You will find SD card flash process also.
rchir, when you said I blew my bootloader some how , did you mean you get GSM error?
Thanks
No,
I was unable to get into the bootloader anymore. I trid to build a boot loader upload SD card and it wiped out the boot loader from my PPC.
GSM error might be due to you Radio firmware failure.
Thanks, well, if you could figure out how to solve the Radio firmware failure, please post it, I'm sure many people here would apreciate it :lol:
would this fix my broken bootloader?my unit doesn't display anything on it's screen, I think I've already erased my bootloader pls help me, I'm so desperate about this.... i tried everything which inside this thread but my activesync can't detect my unit...SOS
I also have a broken bootloader ...
I have an xdaII, and I've somehow overwritten the original bootloader v1.06 with a corrupt bootloader image. Now my xdaII is completely dead. No leds flashing, no screen, no button response. All I get is a flashing red led when i rty to charge my xdaII without the battery. It seems I can't access my bootloader anymore. Plz help !! If you know any method to access the boot loader agin it be a great help. Thanks.
sorry guys, it has been a long time since i sold my XDA, but i think pnewbootloader will only work if you are able to connect your pda to PC with activesync.
So you should have a working XDA, with a broken bootloader to get it fixed. Seems like in your case, Both the ROM and Bootloader are corrupt. I am not sure about any process which will fix both at the same time.
can u post the download again? or pls send it to me [email protected].. THANK YOU..
(the download feature does not work, here in my computer, and another another computer appears a error message)
Hai
I have PWA1 work in wce 2003 GR 4.01.12 not work bootloder can't dispay because i wrong flash my bootloader himalaya ver. 1.29. plzz help my to change my bootloader 6-22 0r 5.15. please.
Hi everybody,
I've cooked a WM2003SE rom from http://lumpistefan.dyndns.org/WM2003SE/form.php
A fail message pop up in 98% progress bar. The progress bar in XDA also stop at need 98% position. But the message above the progress bar shows 'COMPLETED'.
After I hard reset the XDA, I only get the bootloader v5.17 with 'GSM OK' message.
I'm doomed now. How can I continue the upgrade? Or how can I fall back?
Thanks.
I've tried to use the OSImageTool to write a SD card.
but my XDA bootloader 5.17 don't give me the 'Restore SD' command.
And I have no luck to find a valid URL for Wallaby Patch bootloader.
Could anyone help me, please?
Hi Doi Doi,
See my reply to your other post. That should help.
Tim
hi..
i have Dopod C800. it will not turn on. i performed the HardSPL but it failed. before, i can still enter the bootloader. UNFORTUNATELY, at this time, it will not turn on even on the bootloader
is there any way to fix my phone??? please help.. i hope there's still ways to fix my phone.. thanks in advance..
Uhm, Was your IPL higher than 4.0? if its any loader than it will fail...
Im not very experienced with this stuff but can you post a link to the hardspl you downloaded and the tutorial? Obviously if you used a hardspl not meant for your device than it will result in a total brick.
Hi to all!
I need to unlock my elf,but i bricked the device,so now i can't to unlock the CID with USPL - CID Unlock because the activesync doesn't recognize the device.
So my question is:how can i unlock CID from bootloader???
I tried to flash the new rom,but every time i get update error 270.
Please help me to resolve this problem.
Thanks advance.
read the stickies man!!