I blew my bootloader some how and spent some time modifying the pnewbootloader source code to make it work for WM2003 ROM version 4.01.16
I took original source code by itsme and added version and address information for ROM 4.01.16
Use this in conjunction with a valid 5.15 bootloader image to downgrade your bootloader imaget to 5.15 from 6.22 or 5.22 or 5.17
type pnewbootloader_40116.exe bootloader_v5_15.nb0
to apply the bootloader.
FLASH AT YOUR OWN RISK. This program uses defined ROM addresses and will only work with known ROM versions. There are some basic checks to prevent damage.
Fixbootloader don't work
I have T-Mobile ROM 4.01.16 with bootloader 5.15 probably locket by this T-Mobile ROM (I can't flash any other ROM and original pnewbootloader whrite message "Unable to find flash info offset, cannor disable bootloader writeprotect")
When I trying to start you updated pnewbootloader, my WinXP popup a message
"The application failed to inicialize properly (0xc0000135). Click OK to terminate the apllication"
What should it be?.. :?:
This application needs ActiveSync and also the "itsutils.dll" to be located in the same folder as teh EXE.
Which version of XP are you using. I built it on a XP pro SP1 box.
I have exactly the same: WinXP Pro SP1
I run in cmd "pnewbootloader_40116.exe bl515.nb0"
from the folder, which contain
pnewbootloader_40116.exe
pnewbootloader.exe
itsutils.dll
pput.exe
bl515.nb0
Activesync 3.71 i connected to my XDA.
Cant really say why you are having this problem. But one this might help.
Seems like your .net framework is either old or not working.
Go to windows update to download and install the 1.1 .net framework or visit
http://www.microsoft.com/downloads/...e3-f589-4842-8157-034d1e7cf3a3&DisplayLang=en
Thank you for your help! The problem was realy in .NET version.
I had 1.0 installed on my WinXP.
After updating to .NET 1.1 your program is working fine. And it seems, that it updated my bootloader. Its output was
pnewbootloader.exe bl515.nb0
in FindFlashOffset (or somthing like this)
protection found at 8c0d62c8
result: 00000000 00000000
After that my device is still bootable and boot my 4.01.16
But I still can't update my ROM to 3.17.03 through XDATools..
Can anyone help me? plzzzz!
are you using xdarit to write your image to SD card ?.
You have to use SD card flash method to upgrade/downgrade the ROM.
Download XDarit and use that to write the image (.nb1) to SD card in 1k header format.
Then reset and boot your pda after holding the power button. You will see a menu which will let you flash your PDA with the image on the SD. Search for xdarit on the forum. You will find SD card flash process also.
rchir, when you said I blew my bootloader some how , did you mean you get GSM error?
Thanks
No,
I was unable to get into the bootloader anymore. I trid to build a boot loader upload SD card and it wiped out the boot loader from my PPC.
GSM error might be due to you Radio firmware failure.
Thanks, well, if you could figure out how to solve the Radio firmware failure, please post it, I'm sure many people here would apreciate it :lol:
would this fix my broken bootloader?my unit doesn't display anything on it's screen, I think I've already erased my bootloader pls help me, I'm so desperate about this.... i tried everything which inside this thread but my activesync can't detect my unit...SOS
I also have a broken bootloader ...
I have an xdaII, and I've somehow overwritten the original bootloader v1.06 with a corrupt bootloader image. Now my xdaII is completely dead. No leds flashing, no screen, no button response. All I get is a flashing red led when i rty to charge my xdaII without the battery. It seems I can't access my bootloader anymore. Plz help !! If you know any method to access the boot loader agin it be a great help. Thanks.
sorry guys, it has been a long time since i sold my XDA, but i think pnewbootloader will only work if you are able to connect your pda to PC with activesync.
So you should have a working XDA, with a broken bootloader to get it fixed. Seems like in your case, Both the ROM and Bootloader are corrupt. I am not sure about any process which will fix both at the same time.
can u post the download again? or pls send it to me [email protected].. THANK YOU..
(the download feature does not work, here in my computer, and another another computer appears a error message)
Hai
I have PWA1 work in wce 2003 GR 4.01.12 not work bootloder can't dispay because i wrong flash my bootloader himalaya ver. 1.29. plzz help my to change my bootloader 6-22 0r 5.15. please.
My Friend give me XDA1 with complete problem :
1. Broken Wallaby Bootloader
When i check bootloader with soft reset while push power, i cant go to Wallaby menu ( he said he use wallaby 5.15), i use xdatools but but works.
2. Broken ROM 3.20 ( White screen) but i can handle.
3. RSU error in 1% ( RSU use 4.21) i try to downgrade but still error in 1%.
i just confusion about the broken wallaby Bootloader ... any trick to make normal ?????? please...
Well, i think you must send it to the customer support.
Without the Bootloader you can't flash anything. :-/
Or am I in error?
Have a look at this thread, may be it will help:
"Here is a pnewbootloader for ROM version 4.01.16"
@hatamata:
But how you could flash a rom without functionally software at device?
any other tools??
i did use pnewbootloader for ROM version 4.01.16 , xdatool etc but i thingk i have same error with another user. i can't use this tools, how can use cause always error. Anyone can learn to use that tools??
For note this XDA can come to todays menu (i repair with xda repair), can connect with USB .., but i can't repair RSU but first time i thingk i must repair Wallaby Bootloader
@satya:
Well, thats a f**k!
See here: http://forum.xda-developers.com/viewtopic.php?t=11534
RSU seemed to be an big problem! :-(
@ luckyfreddy
i have some experiance to repair RSU error in 1 %, maybe i can use downgrade or burn with SD (if i have Wallaby Bootloader) etc.
The BIG Problem now i can't use the Wallaby .....
Found instructions on how to use bootlaoder etc, however I get a GSM error and also it's 5.17. Have downloaded the patch onto SD card but the bootlaoder goes straight into WAIT and then GSM error. Any ideas as to what I need to do to get this Wallaby hopping?
Thanks
m wallabr boot loader is showing gsm error and ever since the radio has been off.wat do i do to bring it back,imean the gsm,cos i have tried turning it on but to no avail. is there any flash program i can use to correct this?pls hlp me.
Try this:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Stefan
pls i dont have any sd card at the moment
thanks for the site given,but pls i want to know if i can use this without the sd card.can i use the cradle?i.e active sync to run it?cos i need to fix up this stuff fast.the rom version of my ppc is 4.01.16,hope it wont be the wrong type for the flash software that i will use.
If you're device come up and you get activesync working, it should work also with the 4.01.16 ROM....
Stefan
I don't know what is this,how resolve this problem please help?
you entered a code for unlocking after the phone was in standby. You have to type teh code you set after hardreset.
When you dont know it.
Try to hardreset again - or you won´t be able to use your phone.
Sorry.
It is security.
I don't know code for unlocking?!
Have another method to resolve this problem?
a just know this only...
I PL 1.11.0001
SPL 1.11.0001
GSM 02.71.90
OS 1.11.0.0
goran_cipko said:
I don't know code for unlocking?!
Have another method to resolve this problem?
a just know this only...
I PL 1.11.0001
SPL 1.11.0001
GSM 02.71.90
OS 1.11.0.0
Click to expand...
Click to collapse
No it is like a pin code. When you don´t know it. You ahve to hardreset. When it is your device
Hardreset dont work I try...same green screen?
today I try to flashing whit RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe but at 2% show me error INVALID MODEL ID.
How I can flashing with new windows mobile?
how I can unlock my helard? need me tools and instructions?