The Radio part doesn't work, and I can't sync. How can I load th radio rom? Wallaby bootloader 5.15 gives me GSM error. I don't know what to do.
Can someone help me?
Thanks
Esteban
Do this it will solve your problem
-----------------------------------------------------
http://xda-developers.com/repair.zip
I blew my bootloader some how and spent some time modifying the pnewbootloader source code to make it work for WM2003 ROM version 4.01.16
I took original source code by itsme and added version and address information for ROM 4.01.16
Use this in conjunction with a valid 5.15 bootloader image to downgrade your bootloader imaget to 5.15 from 6.22 or 5.22 or 5.17
type pnewbootloader_40116.exe bootloader_v5_15.nb0
to apply the bootloader.
FLASH AT YOUR OWN RISK. This program uses defined ROM addresses and will only work with known ROM versions. There are some basic checks to prevent damage.
Fixbootloader don't work
I have T-Mobile ROM 4.01.16 with bootloader 5.15 probably locket by this T-Mobile ROM (I can't flash any other ROM and original pnewbootloader whrite message "Unable to find flash info offset, cannor disable bootloader writeprotect")
When I trying to start you updated pnewbootloader, my WinXP popup a message
"The application failed to inicialize properly (0xc0000135). Click OK to terminate the apllication"
What should it be?.. :?:
This application needs ActiveSync and also the "itsutils.dll" to be located in the same folder as teh EXE.
Which version of XP are you using. I built it on a XP pro SP1 box.
I have exactly the same: WinXP Pro SP1
I run in cmd "pnewbootloader_40116.exe bl515.nb0"
from the folder, which contain
pnewbootloader_40116.exe
pnewbootloader.exe
itsutils.dll
pput.exe
bl515.nb0
Activesync 3.71 i connected to my XDA.
Cant really say why you are having this problem. But one this might help.
Seems like your .net framework is either old or not working.
Go to windows update to download and install the 1.1 .net framework or visit
http://www.microsoft.com/downloads/...e3-f589-4842-8157-034d1e7cf3a3&DisplayLang=en
Thank you for your help! The problem was realy in .NET version.
I had 1.0 installed on my WinXP.
After updating to .NET 1.1 your program is working fine. And it seems, that it updated my bootloader. Its output was
pnewbootloader.exe bl515.nb0
in FindFlashOffset (or somthing like this)
protection found at 8c0d62c8
result: 00000000 00000000
After that my device is still bootable and boot my 4.01.16
But I still can't update my ROM to 3.17.03 through XDATools..
Can anyone help me? plzzzz!
are you using xdarit to write your image to SD card ?.
You have to use SD card flash method to upgrade/downgrade the ROM.
Download XDarit and use that to write the image (.nb1) to SD card in 1k header format.
Then reset and boot your pda after holding the power button. You will see a menu which will let you flash your PDA with the image on the SD. Search for xdarit on the forum. You will find SD card flash process also.
rchir, when you said I blew my bootloader some how , did you mean you get GSM error?
Thanks
No,
I was unable to get into the bootloader anymore. I trid to build a boot loader upload SD card and it wiped out the boot loader from my PPC.
GSM error might be due to you Radio firmware failure.
Thanks, well, if you could figure out how to solve the Radio firmware failure, please post it, I'm sure many people here would apreciate it :lol:
would this fix my broken bootloader?my unit doesn't display anything on it's screen, I think I've already erased my bootloader pls help me, I'm so desperate about this.... i tried everything which inside this thread but my activesync can't detect my unit...SOS
I also have a broken bootloader ...
I have an xdaII, and I've somehow overwritten the original bootloader v1.06 with a corrupt bootloader image. Now my xdaII is completely dead. No leds flashing, no screen, no button response. All I get is a flashing red led when i rty to charge my xdaII without the battery. It seems I can't access my bootloader anymore. Plz help !! If you know any method to access the boot loader agin it be a great help. Thanks.
sorry guys, it has been a long time since i sold my XDA, but i think pnewbootloader will only work if you are able to connect your pda to PC with activesync.
So you should have a working XDA, with a broken bootloader to get it fixed. Seems like in your case, Both the ROM and Bootloader are corrupt. I am not sure about any process which will fix both at the same time.
can u post the download again? or pls send it to me [email protected].. THANK YOU..
(the download feature does not work, here in my computer, and another another computer appears a error message)
Hai
I have PWA1 work in wce 2003 GR 4.01.12 not work bootloder can't dispay because i wrong flash my bootloader himalaya ver. 1.29. plzz help my to change my bootloader 6-22 0r 5.15. please.
I WAS PERFORMING AN UPGRADE ON XDA1 and got and error and the suggeation was to reboot and that the pgm would recover. Whoever wote these programs must have been in LA LA land when he/she wote them. Now my XDA1 shows only an OS version when it boots and no radio stack. When I now want to reflash with the help of the SD card I do a soft reset power button ritual and get a GSM error and no option to load from the SD. Does anyone know how to get out of this mess? Please give me detailed instructions if yo do
I have a similar problem. i flashed, but it must have failed or been bad versions. i write to the sd but it doesn't boot. i tried the wallaby bootloader but either i scrod the pooch, or it isn't working. if i let it boot, it halts at white screen with top blue strip. if i leave itr go, it reboots after a while and the cycle starts again. i have v5.17 bootloader onboard.
Help!
Since my post I have given up trying to fix the device myself and have sent it to Siemens here in Canada. For a fee of 35$ can they will reflash my phone if that is all that I have screwed up. I have also found out that for the SD card to be recoconized with a new ROM it must be loaded on the card with OSItools. Otherwise it won't. I am using bootloader 5.15
m wallabr boot loader is showing gsm error and ever since the radio has been off.wat do i do to bring it back,imean the gsm,cos i have tried turning it on but to no avail. is there any flash program i can use to correct this?pls hlp me.
Try this:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Stefan
pls i dont have any sd card at the moment
thanks for the site given,but pls i want to know if i can use this without the sd card.can i use the cradle?i.e active sync to run it?cos i need to fix up this stuff fast.the rom version of my ppc is 4.01.16,hope it wont be the wrong type for the flash software that i will use.
If you're device come up and you get activesync working, it should work also with the 4.01.16 ROM....
Stefan
I tried to downgrade my 5600 to wm2003se that was the original os and I had upgraded it to wm6 but want to go back and since I didnt make a backup of the rom I used the updater from Orange to try and downgrade it after following some instructions I saw on a website.
But now the phone just show the orange uk startup screen then goes into the bootloader I tried using the imate wm2003se update it updated successful but when I start the phone a get the imate startup screen and then it goes into the bootloader again. Another thing is that the updaters when I ran them (I reran the orange uk updater so the orange rom is now on the phone again) both show that there was no rom loaded to the phone, all the information the phone model and the other info are completely blank.
I've tried looking up how to fix it but the only solution all the sites give me I cant do cause I dont have a sd card and even if I did my computer cant read sd cards and I dont have a sd card reader either.
I'm sure your wondering about the version of my bootloader it version 1.x, sorry I cant be more specific cause the phone screen does work properly and the only way to get it to show properly most of the time is to push the end call button up and hold it there. A solution to that would appreciated as well but right now I'm more wanting a solution for the bootloader problem I'm having.