hi..
i have Dopod C800. it will not turn on. i performed the HardSPL but it failed. before, i can still enter the bootloader. UNFORTUNATELY, at this time, it will not turn on even on the bootloader
is there any way to fix my phone??? please help.. i hope there's still ways to fix my phone.. thanks in advance..
Uhm, Was your IPL higher than 4.0? if its any loader than it will fail...
Im not very experienced with this stuff but can you post a link to the hardspl you downloaded and the tutorial? Obviously if you used a hardspl not meant for your device than it will result in a total brick.
Related
i have tried to downgrade with various roms but no success..every time i try,the IPL changes
but the SPL always remains the same...SPL:1.06 and i end up still stuck at the splash screen.. i have tried sd backup but no success,something about me not having "the proper security level to do so",and lokiwiz cannot communicate with pda in bootloader mode to try cid unlock ,and i have tried master reset without any success..tells me format failed...so please i really need help to revive my xda,any help will be greatly appreciated..thanx
btw it is a wiza200.
abuholm said:
i have tried to downgrade with various roms but no success..every time i try,the IPL changes
but the SPL always remains the same...SPL:1.06 and i end up still stuck at the splash screen.. i have tried sd backup but no success,something about me not having "the proper security level to do so",and lokiwiz cannot communicate with pda in bootloader mode to try cid unlock ,and i have tried master reset without any success..tells me format failed...so please i really need help to revive my xda,any help will be greatly appreciated..thanx
btw it is a wiza200.
Click to expand...
Click to collapse
im assuming u have tried a hardreset as well? have u tried installing Buttons 1.5 ROM at bootloader?
Malik05 said:
im assuming u have tried a hardreset as well? have u tried installing Buttons 1.5 ROM at bootloader?
Click to expand...
Click to collapse
..Yes i have tried a hard reset still no success...could you please explain to me what "installing Buttons 1.5 ROM at bootloader" mean? i am a noobie in these things really..
sure...first tell me if u have a G3 or G4 Wizard...and is it CID unlocked? you must be CID unlocked to perform any custom ROM modifications...
Malik05 said:
sure...first tell me if u have a G3 or G4 Wizard...and is it CID unlocked? you must be CID unlocked to perform any custom ROM modifications...
Click to expand...
Click to collapse
It must be a G3 Wizard (not really sure)because it came in as a XDA MINI S from O2 and at the splash screen it has this info: IPL:1.05 SPL:1.06 GSM: 01.01.10 OS:1.1.9.3 after flashing with Xda_minis_LaunchRom_v154102_2. i am not sure about CID unlock but i am using a different network other than O2. it was shipped with windows mobile 5.0...
a G4 PDA will report an IPL and SPL similar to 2.21.0001 and a G3 PDA will report something similar to 2.21 (notice the G3 doesn't have the trailing .0001!)
http://forum.xda-developers.com/showthread.php?t=285435
go to the above link and CID unlock your device just to be on the safe side...as for going into the bootloader, u can do this by keeping the Camera button pressed, and pressing the softreset button..then u will go into a colored screen(red,green,blue,white)which will show your IPL/SPL...once u are in that screen, go ahead and connect it to your computer(via USB) and u will notice on ur device, it will show USB on the bottom...then u can proceed with the guide to CID unlock your phone...let me know how it goes!! =)
Hi i installed the buttons rom like you suggested but it still hangs at the splash screen(beer jug)with this info IPL:1.01 SPL:1.06 GSM:01.12.10 OS:1.5.4.2. activesync does not recognize the pda in "hang mode" for me to be able to try CID unlocking...so where do i go from here ? please help...
oo wow...umm gosh im out all of ideas...i dont know what else to suggest, ive never heard of this type of problem....sorry!
Malik05 said:
oo wow...umm gosh im out all of ideas...i dont know what else to suggest, ive never heard of this type of problem....sorry!
Click to expand...
Click to collapse
So does it mean my fon is bricked or what? or could it be a hardware problem?
ummm i dont think its bricked, if it was, you wouldnt be able to get into the bootloader...im sure theres a solution to the problem, i just dont know it because ive never seen this type of case before, im fairly new to the MDA...i started modifying my wizard less than 2-3 months ago
Malik05 said:
ummm i dont think its bricked, if it was, you wouldnt be able to get into the bootloader...im sure theres a solution to the problem, i just dont know it because ive never seen this type of case before, im fairly new to the MDA...i started modifying my wizard less than 2-3 months ago
Click to expand...
Click to collapse
..Well thanx for all the help,i will let you know if anything comes up..
Help!
Yesterday when i was trying to installed Leies CE-Star Crossbow on my x01ht, maybe it didn't support WM5.0 and now my x01ht is stuck in the bootloader screen forever!
I've tried to flash it again by micro SD card, it did completed the flashing process but it's still the same, stuck in the bootloader screen.
i've also try the mtty usb connection and set 14 0, still the same...
my bootloader version is 1.04
will there by anyway to fix it??
Please help...i'm a newbie to ppc and i've only been using the phone for 3 days!!
hi, as first look on wiki - http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes then for example in here - http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES or here - http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems problem 4. then ask us if it is another way to solve your problem ;-) and if this did not help, provide us more information about your device.
i have tried using the SD card flashing method with RUU_Hermes_DopodAsia_CHT_1237084_1060010_SHIP and HER_DopodAsia_1237074_1060010_WWE_SHIP.exe rom
But still no difference
do i need to use HTC Hermes SIM & CID Unlock . v3 first even though it's 1.04 bootloader?
does it work on my x01ht??
Please help...i'm really confused
I received HTC Herald P4350 to change Language from NOrweign to English.
I try to use HERALD-USPL-beta3. and Now phone is dead
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.exe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
Any one here can share me the solution to unbrick this phone.
Br.
canonyang rulez)))
hate this numbers 1.08.001, as in "lost" film
DONT USE *SPL* (uspl,hardspl,jspl,another) IF YOUR SPL UNDER 4.00.0000
DrMobile said:
I received HTC Herald P4350 to change Language from NOrweign to English.
I try to use HERALD-USPL-beta3. and Now phone is dead
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.exe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
Any one here can share me the solution to unbrick this phone.
Br.
Click to expand...
Click to collapse
Send your phone to HTC Service Center, Same thing happend to me and they
changed it under warranty.
In my country there is no service center for HTC.
and phone is come from norway
I need solution. otherwise customer will eat me.
Br.
A. Wahab
Hi DrMobile,
Have you solved your issue? I have the same issue as you...
Please help by sharing with us the solution
Thanks,
Lamnl
same in my mobile error 300
i am still trying the rom without any success. please help
i have the same problem. my phone is showing bootloader , i have ipl/spl 1.08.0001 i tried anythin but nothing worked.
i hope there is a solution with our phones, and someone around here will take a look to our problem.
stuck in bootloader
i have the same problem.
eror 300
pls help
me 2 plz any one can help me 2 plzzzzzzzzzzzzzzzzzzzzzzzz
"those with a SPL lower than 4.0.0.0 or something like that gets bricked. I just wanted to get this first post edited to reflect that so that people don't keep bricking their phones."
(Moderator: whether this is accurate or not I do not know - but use your own discretion)2nd Jan 2008
from another topic, send them for repair
Try this:
http://forum.xda-developers.com/showthread.php?t=343450&page=2
Warranty got back my device back to life
Hi I bricked my device a few days back and tried all the stuff to bring it back to lifee but in vain... I finally gave up my trials and approached the service centre. They just replaced the motherboard inside and luckily everything seems fine now. They hadn't charged me anything as it was within warranty. Anyone in India if you need service centre address..
http://www.asia.htc.com/asia/in/support_sc.html
Though this site says HTC, I got my Dopod C800 serviced there...
Very few questions and cool guys.
Regards,
Murali
Now I think that the reason of non flashing, even with official RUU, could be corrupted CID-block after using HardSPL on devices with low IPL/SPL. I've read thread about similar problem with Wizard. The question is: how to restore the CID block in our bricked devices? I'm not even sure if this theory with CID-block is a reason...
What do you think about such a trick:
- Run RUU on someone's working HTC device but only until the moment, when it wants you to click the last button to finally proceed with flashing. (This step is to let RUU to know that this RUU is correctly dedicated to our device). It's a kind of fake for RUU, cause our CID doesn't match the CID of ROM included in RUU.
- Next disconnect working device from the USB and connect your bricked device with launched bootloader mode
- Next click the final button to launch flashing in RUU application. If the process of CID matching was done before this step, the flasher should start and let us flash our bricked device. But I'm sceptic to this solution. If it was so trivial, everyone could flash his device with different ROMs so easy...
I can't try this trick cause I don't have working HTC. What do you think? Will it work or not?
DrMobile said:
I received HTC Herald P4350 to change Language from NOrweign to English.
I try to use HERALD-USPL-beta3. and Now phone is dead
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.exe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
Any one here can share me the solution to unbrick this phone.
Br.
Click to expand...
Click to collapse
D'you mean
working Herald or any HTC?
I have the same prob
I'm thinking about working device, exactly the same as this bricked one - in this case Herald. But all of this is only a theory. I don't have enough knowledge about the RUU flashing process.
My another idea is to swap only ROMUpdateUtility.exe, rapitool.exe and EnterBootloader.exe files from official RUU dedicated to your bricked device, with different versions of these files from another HTC devices just to test if it helps to recognize our bricked devices by RUU. Maybe the problem is wrong version of these files? But which versions are correct?
I'm just trying to find a solution to unbrick our f.....g Heralds . I know this is only a matter of time and soon or later we will know what to do. Moreover I believe that there are people, even on this forum, who know how to unbrick our Heralds but some of them don't want to do us a favour. I know what I'm talking about...
GenePr said:
D'you mean
working Herald or any HTC?
I have the same prob
Click to expand...
Click to collapse
i have the same problem.
error 300
pleas help
have the same error...300
but i can manage via mtty using bootloader commands
when i put password <Bs...> the mtty shows last thing ive running and phone shows a progress bar with 0% (like.. what uve been doing last time?)
i think we can manage it via bootloader commands
i know.. i know
(at least our devices run bootloader mode, is recoverable!)
it can be flashed by SD? how?
Welcome to the club...
As far as I know, SD flashing doesn't work because of the CID-lock.
tramuyo said:
have the same error...300
but i can manage via mtty using bootloader commands
when i put password <Bs...> the mtty shows last thing ive running and phone shows a progress bar with 0% (like.. what uve been doing last time?)
i think we can manage it via bootloader commands
i know.. i know
(at least our devices run bootloader mode, is recoverable!)
it can be flashed by SD? how?
Click to expand...
Click to collapse
no, it cant be possible! im not goin to pay HTC Herald
there's a solution, a HOPE... (u try to flash with original flashfile?)
I thinks the solution is to unlock CID from bootloader mode, for old models i did so, but how to unlock Herald's CID
hi,
ive been trying to upgrade an artemis mobile to a custom rom...and ive gone through all the necessary steps (cid unlocking, etc)
however, my device is stuck at the loading screen...and nothing happens after that...
i can get into the bootloader....but thats about it...
any suggestions on what to do?? i'd really appreciate the help
thanks.
Does your phone gets into the bootloader....???
If yes, then after entering the bootloader mode(with color stripes),
connect your phone with the PC and launch the ROM Update Utility....
The ROM update will start.
If it does not, it means that you cell phone is still not CID unlocked...
Check your SPL as 1.11.0000
If it is so then your phone is CID unlocked, or else not....
Reply if any queries...
Hello,
I got problem when upgrading mais PDA. my PDA is locked for Orange(France) and wanna unlock it.
I folewed the unlock tutorial , but at the end the phone shutdown after displaying the splash screen. seems that the rom was wrong.
I got ERROR 270 when I try to upgrade with differente rom. so right now, I can not it.
please help !!!
How do you unlock?
What is your IPL and SPL?
It should be 3.10 .
Unlock error codes are located here:
http://wiki.xda-developers.com/index.php?pagename=Elf_RUU_Error_Codes
thank for your replay
I used the USPL tutorial to unlock, but when update the rom I think I used a wrong version.
my IPL SPL 1.16.
my HTC ELF 0100 didn't continue starting.
I tried most solution found on the net.
Wait, what?
You used the wrong version to update?
which is?
I didn't remember exactly, but I have a T-Mobile Splash screen.
the phone shut down seconds after starting.
thanks for help !!!!
any one have an idea on how to recover my phone , please help !!!!!!!!!!!!!!!!!!!
my elf is in 3 color, try mani soft but not work any ideea ?