i destroy my xda when i want upgrade radio stack v4.2.1
what i must do to install radio stack ?
when the installation start on 1% stop and say
"Flash failed! Press OK to restart your device."
My phone dead ... i write rom 3.17.07 from o2.co.uk and download radio stack from the same page.
i try install radio stack 3.23.01 - it's the same community...
anybody can sey me what i must install .. what version ..and from i can downlaod .. ? to INSTALLATION FINISH
sorry my english.. i'm from poland...
[/b]
Related
I've tried to upgrade radio my current verison was 3.16 i used RSU_V4.21 my telephone was connected to the PC all the time, after 2 reastarts I got 1% error on the phone and update was not succesful. on the boot screen veriosn was 4.21 but my radio was dead, no signal ... nothing... my 2003 rom verison is 4.01.16 please help
Hello to all. My name is Kushal.
I own a Cingular 8125.
ROM Version :: 1.8.11.1 WWE
ROM Date :: 11/24/2005
Radio Version :: 01.16.11
Protocol Version :: 4.0.13.21
IPL 1.xx
SPL 1.xx
I want to upgrade my ROM ... I even tried to flash it but it was giving me an error with error number 266, something like that ... I even tried lokiwiz.bat and EnableRapi.cab and then again tried to flash the ROM but again failed ...
Anyone please tell me step by step what should be done in order to successfully flash the ROM and upgrade it to WM6.
I was using Kaiser ROM for upgradation ...
M waiting for your reply !!!
Thankyou.
Can anyone suggest me to use which ROM for upgrading ...
also when i am trying to upgrade the ROM with KAISER ROM
on my PDA it is showing
-----------------------
IPL 3.08 RUU
SPL 3.08
USB
------------------------
and on my PC -->> an error [266] occured...
thats it ...
ok,First,is your phone in working condition,does it load up OS or its stuck on Bootloaders (Multi Color Screen) ? Did you perform CID unlock before upgrading to wm6 ? coz without CID unlock,it won't upgrade at all.
If its working,then download WST_4.2.2 tool and verify the CID Lock/unlock status of the phone,if its still CID unlock,then get it unlocked either through 'lokiwiz 02b' or WST_4.2.2,only then flash any wm6 rom.
Secondly,if its not working and gets into Bootloaders,then download the official cingular rom and flash it in Bootloaders to recover back to its default working status and then proceed further as described above.
Read and follow this guide carefully to fully understand the CID unlocking and upgrading method :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Buddy, my PDA is very well in working condition, and it loads the OS and doesnt stop at bootloaders ... i am able to make calls and do what ever ...
Next, my CID is unlocked ...
And now i cant figure out how to flash a ROM ...
may be i am confused or i am not able to understand the steps involved in doing so ... And can you please suggest me a gud ROM image to upgrade ...
Thank you.
At 1st I run onlipro hardspl1.1 for p3600i after that sync ur pda the will send u to the bootloader screen when install fail after that unpluck the pda and the restart the romupdateutility and last the HARDSPL successfully install inside.
WHEN GO INTO THE BOOTLOADER YOU WILL SAW
TRIN100
IPL-1.00
TRIN100
SPL-3.20.Olipro
After that using same method go bootloader upgrade the radio version 1.56.70.11 also install succesfully
While going to bot the ROM inside through bootloader then run update utility
once starting to upgrade the rom 1 % shown the the pda auto disconnect and error message 270 shown
wth is this problem i read tons of comment but it is totalli invain
is there a diffrence between using window xp sp2 , sp 3 and vista
HOPE SOME PRO can help me on this issue i test all the ROM also same 1 % auto disconnect
ORIGINAL HTC ROM
RUU_Trinity_DOPODASIA_WWE_3.00.707.17_6275_1.46.00.11_108_Ship
AFTER CHANGE
HARDSPL Olipro 3.20
Radio 1.56.70.11
ROM stil maintain the same offical rom no way to change please help =(
Hi,
I have htc polaris (pola100)
but I unwillingly flash spl version 3.13.000 but now doesn't go anythink flash,
don't go flash anythink other spl version (1.25.0000, 1.28.0000)
Please anybody help me.
You had to flash the original ROM of your Polaris before flashing the Original SPL.
Can you get the tricolor screen?
I have original spl but after I flash hard-spl v2 and flash not original rom,but this rom was very bad.
So I would back my original wm6.1 rom htc, so i find original three original spl (1.25.0000 1.28.0000 3.13.0000) I flash spl 3.13.000 but now doesnt flash anythink anythink spl and anythink rom
please and now?
(ps: sorry my english is bad)
but yes a see my bootloader , i see red blue green and white color
on the left side is write:
POLA100
SPL-3.13.0000
CPLD-2
and the right side is write:
RUUNBH
okay, I understand.
Isn't there any ROM flashed?
i tried rom:
3LIT3_VI_Full
udK_Syrius_R7_WWE
c_shekhar_Pola_WM3.13.755CS_Build20755_Public_Final
and original rom htc wm6.1
But all roms frozen near 0% on htc display
I think you've bricket your phone
but on this list:
http://forum.xda-developers.com/showthread.php?t=351964&page=28
he have same problem as I.
mtelleria mtelleria is offline
Junior Member
Join Date: Jun 2008
Posts: 6
Default Problems installing HardSPL
Hi,
I have installed the last official version on WM6.1 on my htc, now i want to install one custom rom from this forum.
I tryed to istall first HardSPL, but i don't know why, the process get stuck at 0% of the istall and never continue.
In the 3 color screen appear:
POLA100
SPL-3.13.0000
CPLD-2
Someone can help me?
Thanks
____AND THIS ALSO BUT OTHER SPL:
he write:
"donchischotte" donchischotte is offline
Junior Member
On the screen I read:
-------------
RUUNBH
POLA100
SPL-1.28.0000
CPDL-2
--------------
Here is what I do and what happens when I try to use HARD-SPL V2:
1) I connect the USB cable and the writing on the device changes from "serial" to "USB"
2) I run romupdateutility
3) I check "I understand..." + next
4) I check "I completed..." + next
5) on the PC a message "verifying the information on your PDA phone, please wait" appears and after a while the device switches to a screen with a progress bar at 0%, while on the PC the following message appears:
--------------------------------------------------------------
Current information about your PDA phone:
Image version:
Select from below:
UPDATE Update the current ROM version
--------------------------------------------------------------
6) I click UPDATE and the following appears:
------------------------------------------------------------------
Verify that you want to update the ROM version:
From:
Image version:
To:
Image version: OliNex-2.20
------------------------------------------------------------------
7) I press "next" twice and I get the message "updating the ROM image on your PDA phone", but the progress bar is stuck at 0% and after a minute or so i get the ERROR[262] : UPDATE ERROR
I tried usinr both Vista and XP, with or without MicroSD and SIM card. It's always the same.
I tried flashing different SPLs (even the two original ones) with the same problem. If I try to flash a ROM I get the ERROR [294] : INVALID VENDER ID"
after 1% progress.
I HAVE SAME PROBLEM
I think you must wait Olipro or another chef here to say you how to refalsh SPL with 2.40 version in command line
You can try to flash you original ROM via SD-Card.
what is the solution ? I have the same problem with :
SPL-3.13.0000
I can't flash ...
Now its workhttp uff;-)
I flash my polaris 10* and all of a sudden work.
hi...
i have 3LIT3 VI FULL with Hard-SPL-V2 and i want to install the original rom again (RUU_Polaris_HTC_PTG_3.13.410.0_radio_sign_25.85.30.07_1.59.42.15_Ship)... but wen i flash it freeze ate 32% and FAIL! i do a soft reset and then it go to 3 color screen. to solve this i flash again the Hard-SPL-V2 and the phone work again normaly... i try to flash my Polaris using the microSD card with original rom but it give me a error on the screen:
00018003
POLAIMG.nbh - FAIL
RADIO_V2 - RSA Fail
BOOTLOADER -
SPLASH1 -
OS -
Update Terminate
UPDATE FAIL
Click to expand...
Click to collapse
i try to flash the original spl and the radio 1.59.42.15 in the same way and all ways but still dont work it return again to rom 1.65.xx.xx and the Hard-SPL-V2
IM STUCK TO THIS ROM
i searched everywere and nothing help me..
my polaris is originaly unlocked and i have windows vista ultimate sp1.
sorry my english
PLEASE HELP
SOLVED!
I search more and found this http://forum.xda-developers.com/showthread.php?t=503124 and searched for radio 1.58.21.23 and found http://forum.xda-developers.com/showpost.php?p=2144280&postcount=4... i flash my cruise with RUU_Polaris_HTC_WWE_1.25.405.1_radio_sign_25.65.30 .04_1.58.21.23_Ship and it works!!! then i just flash with original portuguese rom normaly...
tanks anyway