Related
Hello.
And bacon and spam:
I've recently upgraded my SGS to ICS (ICSSGS ROM) and started to develop a simple application.
So, now i've got to the point that the emulator starts to show its limitations, so i need to debug directly on the real device.
Well, i've been trying to make ADB recognize my phone, tried several usb drivers from several sites, none of them worked.
After several hours spanking windows, it's finally working (yes! almost 6 AM in the morning!).
What matters:
So, to anybody who have the same problem as i had, do the following:
0. Uninstall any drivers that you've tried before.
1. Extract the zip file that i've uploaded to anywhere you like.
2. Enable debugging on your phone and connect it to PC throught the USB cable
(Just connect it, don't mount)
3. On your computer, click Start -> Right click on "Computer" -> Manage
This will open the "Computer Management" window (it might take some seconds to load).
4. Click "Device Manager". Now you should find your device in the list. It must be really easy to find. It's called something like "GT-I9000" or "GalaxyS" and it has a yellow warning sign next to it.
5. Right click on it and choose "Update Driver Software". In the window that appears, choose "Browse my computer for driver software". It then asks you where is the driver.
6. Click the "Browse" button and choose the folder you extracted from my zip file.
(If you didn't change it, it must be called "Android Composite ADB Interface")
7. Click "Next" and cross your fingers. If you're lucky, it may work for you.
Final notes:
1. I'm not responsible for ANYTHING. Whatever you do, it's your own choise to do it. I guarantee absolutely nothing.
2. This is was tested on Windows 7 - 64 bits with Team ICSSGS RC4.2 ROM and Semaphore ICS 0.9.1 Kernel.
3. Have fun.
4. If you try this, please answer the topic and tell everybody if it's working for you (mentioning your Windows version and what ROM you use).
Driver file:
-> http://www.mediafire.com/?t8ekrd9ly3mwwbk
Missing file when installing driver on windows 7 x64
Hi,
I have recently installed the most recent Dark Knight ICS 4.0.4 build to my Samsung Galaxy S. The ROM seems very good but I'm an android app developer and need to be able to debug my applications on the device via USB.
I have tried the driver provided in the thread which won't install due to a missing file according to the Windows 7 x64 driver install wizard. The exact message is displayed after step 7 and says:
"Windows found driver software for your device but encountered an error while attempting to install it."
"Android Composite ADB interface"
"The system cannot find the file specified".
Is there a file missing in the package? Has anybody managed to get this driver working?
Cheers,
Ben
Does it say that it doesn't find a controller or that is there a missing file?
Anyway, please try this installer and let me know if it works for you:
http://www.mediafire.com/?v70501cxbzzdvc2
What's wrong with the Nexus S drivers available with Android SDK?
Google USB driver, R4 developer.android.com/sdk/win-usb.html
The SGS will present it self like that when it is running ICS/CM7/CM9.
Sent from my GT-I9000
METEMEDO said:
Does it say that it doesn't find a controller or that is there a missing file?
Anyway, please try this installer and let me know if it works for you:
http://www.mediafire.com/?v70501cxbzzdvc2
Click to expand...
Click to collapse
Dont work for me.
System: Windows 7 x64
Android 4.04 Dark Knight
Nevertheless thanks for your approach. I'll test if it works with the SDK Updater.
I'm going to test in my desktop this weekend to check if it works with it.
I have the same problem, but with WIndows 7 32 bit. Drivers from discusion doesn't work. Don't you have some for 32 bit?
I found SDK Components on developer.android.com, where is Android driver which suppose to work, but unfortunately ODIN still do not see phone.
I also have the same problem but mine is worse because my phone is completely down after I tried to restore from a GB ndriod backup failure , phone won't boot , cannot boot into recovery only in download mode but no way my 4 x computers would detect the phone now ....tried using heimdall in linux as well as sdb, no go....so sad...help...
Sent from my Dell Streak using XDA
Using Google USB drivers finally worked for me. They can be optionally installed with Android SDK using SDK manager (extras). After installation drivers can be found in <sdk>\extras\google\usb_driver.
Just follow the instructions in the first post to find your device from device manager with exclamation mark. Need at least one reboot to work and I also redirected the driver installation process to Google usb driver directory but now ADB finally recognizes my SGS (MyICS, Android 4.0.3).
Edit: Operating system Vista 64-bit
[Currently stuck in "error: device not found" while trying adb push -command. I will update if I find a workaround. Probably something to do with inf-file.]
For alternate .inf -file (optional):
Google "usb-drivers-not-working-after-flash-latest-rom-ota" and see post #12 to see alternative inf-file. Some have managed to make adb recognize the device with that file, but I have at least this far been unsuccessful.
Edit: Problem above was caused by me being stupid and trying to use push in shell, which caused phone unable to locate host system folders. I don't know if that inf file has anything to do with drivers working now, but go ahead and try it if doesn't work with the original .inf
I got my i9000 recognized using the latest drives from the Google sdk
That‘s great
http://ics.samsung-updates.com/addons/usb_driver.zip
oxidising said:
I got my i9000 recognized using the latest drives from the Google sdk
Click to expand...
Click to collapse
I tried last night didn't work for me.... (r18)
Sent from my Dell Streak using XDA
oxidising said:
I got my i9000 recognized using the latest drives from the Google sdk
Click to expand...
Click to collapse
Daha açık anlatabilir misiniz?
IWillExplain said:
http://ics.samsung-updates.com/addons/usb_driver.zip
Click to expand...
Click to collapse
... this driver actually worked for me...!
(Tiramisu ICS)
USB option has been lost in my galaxy s
RazorNova said:
Using Google USB drivers finally worked for me. They can be optionally installed with Android SDK using SDK manager (extras). After installation drivers can be found in <sdk>\extras\google\usb_driver.
Just follow the instructions in the first post to find your device from device manager with exclamation mark. Need at least one reboot to work and I also redirected the driver installation process to Google usb driver directory but now ADB finally recognizes my SGS (MyICS, Android 4.0.3).
Edit: Operating system Vista 64-bit
[Currently stuck in "error: device not found" while trying adb push -command. I will update if I find a workaround. Probably something to do with inf-file.]
For alternate .inf -file (optional):
Google "usb-drivers-not-working-after-flash-latest-rom-ota" and see post #12 to see alternative inf-file. Some have managed to make adb recognize the device with that file, but I have at least this far been unsuccessful.
Edit: Problem above was caused by me being stupid and trying to use push in shell, which caused phone unable to locate host system folders. I don't know if that inf file has anything to do with drivers working now, but go ahead and try it if doesn't work with the original .inf
Click to expand...
Click to collapse
What should i do after instaling SDK
IWillExplain said:
http://ics.samsung-updates.com/addons/usb_driver.zip
Click to expand...
Click to collapse
This worked for me
The very important thing is that newest Google USB driver is in
Code:
[B]<android-sdk>/extras/google/usb_driver/[/B]
location, not in
Code:
<android-sdk>/usb_driver
It really makes the difference !
these drivers only worked once...
all the other times killing and starting over adb i was getting error messages like "device not found" and "protocol fault" even though adb devices was listing the device online.
apparently i connected the phone to another USB3 port on my pc (front panel) and that was it!! it now works every time i type adb shell or adb devices.i no longer get any error messages.rather weird
anyway..i also wanted to be up to date with everything so i uninstalled all related software like the older java 6 jdk, Android SDK and the drivers mentioned above.
i followed the procedure below and installed all the latest packages:
latest java 7u5 JDK, the latest Android SDK (nstaller_r20.0.1-windows.exe) then ran sdk-manager and loaded http://developer.android.com/tools/extras/oem-usb.html#InstallingDriver google USB drivers rev 6. then installed these drives so i got the ADB composite interface on my device manager and it all works fine now.
I recenelty installed latest ICS , and SDK recognizes my phone as ACER ADB , when I'm pretty sure its a Samsung I9000 . I tried uninstalling the ACER ADB and install the one that the guy posted in the first post , and it didn't work , it said this driver is not compatible , oddly it reinstalled ACER ADB though. I can't even uninstall it at all , I removed all my Samsung drivers , and everything else I installed for Samsung , and its still there , I even tried removing the GOOGLE USB drivers , still there.
Neendless to say that the phone doesnt connect to the PC at all even though it says everything is alright. For example i got ths gPAD app , which uses the USB with Debugging to turn the phone into a mouse , but it says its not connected even though it is.
I'm Italian, sorry for my English.
A few days ago I unlocked the bootloader via Toolkit, rooted and flashed the TWRP recovery _.
But I had hard difficulty:
After driver installed, I unlocked bootloader, enable debugging and then NOTHING!
In practice, the N7 was recognized by windows 7 64bit only in FastReboot mode ..
I tried in every way possible, deleted and reinstalled the driver 50 times, restored windows to a previous point, installed the drivers manually tried without toolkit, but how ADB just do not want to know.
For hours I was still with the bootloader unlocked but without root, until came to my rescue a friend with another notebook but same windows 7 64. Load the Toolkit, install the drivers and everything goes perfectly, I do everything in 5 minutes.
On my laptop there is always the issue driver ADB, in the future I still need my PC recognized the N7 in ADB, how can I do?
One thing that I think is not well understood is that there is no "Generic Class Driver" for ADB nor for fastboot...
... even though the very driver that works for one mode (or phone/tablet device) may be perfectly fine with a different device. The wire protocol for both fastboot and adb are extremely simplistic.
So, what that means is that if the Hardware ID used by the USB device endpoint registers on the bus with a different VendorID/ProductID, Windows will (correctly) not use a previously-installed ADB driver, or previously installed fastboot driver - even though they would probably work just fine.
Here is an example. The Nexus 7 registers the following Hardware ID when ADB debugging is turned on in the OS:
USB\VID_18D1&PID_4E42&REV_9999&MI_01
USB\VID_18D1&PID_4E42&MI_01
On the other hand, if you are using TWRP, it's adbd daemon shows up on the PC as:
USB\VID_18D1&PID_D001&REV_9999
USB\VID_18D1&PID_D001
This means that you might need to install a different driver for using the ADB with the OS, and a different driver for ADB under TWRP - even though it is exactly the same hardware on the other end of the cable! In the absence of a generic class driver for a given USB endpoint, Windows tries to match drivers in it's local (& internet) database based on this VID/PID pair.
If you have a look at the [ADB/FB/APX Driver] Universal Naked Driver 0.72 thread - and download it and have a look at it's included "android_winusb.inf" file - you will see literally hundred of different VID/PID pairs in the driver's android_winusb.inf file in the installer package, corresponding to many hundreds of phones/tablets. Same driver with hundreds of devices listed as compatible.
In the past I recall taking the Google (SDK) USB driver, and manually editing into place matching VID/PID pairs for a HTC phone into the .inf file. It worked perfectly; I probably flashed that phone hundreds if not thousands of times using the Google Driver (My PC is a Windows 7 Pro x64 machine btw).
Anyhow, I have pulled this stunt twice now - once editing the .inf file for the Google Driver, and I did it once with the Universal Naked driver too. You can choose which driver you want to start with.
If you want to give it a roll, you can start with any of those three drivers:
- Google (SDK) USB driver
- XDA "Universal Naked" driver
- Asus Nexus 7 USB Driver (Look under Download)
Note that since you are using W7 x64, make sure that you add each new entries to the .inf file twice - once in the ".NTx86" section, and duplicated again in the ".NTamd64" section. When editing .INF files, make sure to use an editor which preserves simple text file formatting - use "notepad", not "wordpad"
If you want a reference for what values to use, see the bottom end of this post. You should see exactly these same values in your Device Manager, however.
Note that if you see the device show up in the Device Manager as being correctly identified and marked as "working normally" - but it doesn't work - you should probably remove that driver and re-install from a different driver package.
This would certainly be the case for any drivers you saw associating with VID/PID pairs that look like:
VID_18D1&PID_4E40 bootloader/fastboot
VID_18D1&PID_4E41 single adb
VID_18D1&PID_4E42*&MI_01 composite adb
VID_0955&PID_7330 avx mode
VID_18D1&PID_D001 adb in TWRP (maybe CWM too, I didn't check)
That's a lot to throw at you, especially with Italian <=> English in the mix.
Feel free to ask questions.
bftb0
Hello,
I tried to follow your advice but I have not solved.
I'll explain what I did, so you can correct me.
-Uninstalled previous drivers (from device manager, control panel)
-Restart the PC
-Modified the inf file. Package Asus Nexus 7 USB driver (ntx86 and NTamd64 sections) attach screenshots
-Linked N7 (usb debugging actived)
-Found portable device in device manager, update drivers manually from the Nexus 7 Asus USB drivers
I tried to change also too XDA "Universal Naked" driver by following the same procedure.
I tried to create another account on my pc, but no ADB!
View attachment 1734997
Did you update to 4.2.2?
The is something to do with adb in that update, needing a password or something. I am not sure but if you did update you might want to check that.
Sent from my Nexus 10 using Tapatalk HD
stonebear said:
Did you update to 4.2.2?
The is something to do with adb in that update, needing a password or something. I am not sure but if you did update you might want to check that.
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
Use "Google USB drivers" you get after you install from here http://developer.android.com/sdk/index.html
Its drivers work with 4.2.2
I got 4.2.2. rooted with ADB working now via only this and no other method
No problem with adb in 4.2.2... I tested yesterday (no need psw too...)
stonebear said:
Did you update to 4.2.2?
The is something to do with adb in that update, needing a password or something. I am not sure but if you did update you might want to check that.
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
Marco16V said:
-Found portable device in device manager, update drivers manually from the Nexus 7 Asus USB drivers
Click to expand...
Click to collapse
Is this the only device which shows up in the device manager? The "Portable Device" is either the MTP or PTP endpoint - not ADB. The latter (adb) should show up elsewhere in the device manager.
You should certainly NOT be trying to install fastboot/adb driver on MTP/PTP endpoints!
I think perhaps I am not understanding because I am guessing at certain details.
Q1) Do the drivers appear to install correctly?
Q2) When you have the N7 in the corresponding mode - whether or not you observe (device manager) "working normally" or "unknown device" - do you see the following Hardware IDs showing up in the device manager?
Bootloader Fastboot Mode:
USB\VID_18D1&PID_4E40&REV_0000
USB\VID_18D1&PID_4E40
OS adb:
USB\VID_18D1&PID_4E42&REV_9999&MI_01
USB\VID_18D1&PID_4E42&MI_01
TWRP adb (Possibly also CWM adb, I haven't checked it) :
USB\VID_18D1&PID_D001&REV_9999
USB\VID_18D1&PID_D001
Q3) I presume you went through the same install sequence on your PC that succeeded on the other laptop - in the event the problem is a hardware problem, did you try a different cable or USB port on your PC?
Q4) When you remove drivers, are you requesting that the drivers be removed from the PC?
The 4.2.2 authentication issue might be an issue (although I suspect this is a adb program version issue, not a driver version issue. In any event, it wouldn't effect the behavior of adb in TWRP/CWM.
Sorry for all the questions.
bftb0 said:
Is this the only device which shows up in the device manager? The "Portable Device" is either the MTP or PTP endpoint - not ADB. The latter (adb) should show up elsewhere in the device manager.
You should certainly NOT be trying to install fastboot/adb driver on MTP/PTP endpoints!
I think perhaps I am not understanding because I am guessing at certain details.
Q1) Do the drivers appear to install correctly?
Q2) When you have the N7 in the corresponding mode - whether or not you observe (device manager) "working normally" or "unknown device" - do you see the following Hardware IDs showing up in the device manager?
Bootloader Fastboot Mode:
USB\VID_18D1&PID_4E40&REV_0000
USB\VID_18D1&PID_4E40
OS adb:
USB\VID_18D1&PID_4E42&REV_9999&MI_01
USB\VID_18D1&PID_4E42&MI_01
TWRP adb (Possibly also CWM adb, I haven't checked it) :
USB\VID_18D1&PID_D001&REV_9999
USB\VID_18D1&PID_D001
Q3) I presume you went through the same install sequence on your PC that succeeded on the other laptop - in the event the problem is a hardware problem, did you try a different cable or USB port on your PC?
Q4) When you remove drivers, are you requesting that the drivers be removed from the PC?
The 4.2.2 authentication issue might be an issue (although I suspect this is a adb program version issue, not a driver version issue. In any event, it wouldn't effect the behavior of adb in TWRP/CWM.
Sorry for all the questions.
Click to expand...
Click to collapse
When the drivers are not installed and I connect to pc N7, is only recognized as a portable device, then later recognized as Google Nexus 7.
To install the drivers (modified as described) I click reinstall driver, then later recognized (if connected to pc in android mode, with usb debugging actived) as Android Device in another voice, ADB interface. But is not recognized by the toolkit under adb devices, and even when I try using cmd.
1-When I install the drivers. seem to be installed correctly.
2-Sorry, where can I find Hardware IDs in Device Manager? What is the difference between OS adb and TRWP adb?
3 - In other pc (with same N7, same cable, same driver, same toolkit) I had no problems. I tried to change only the USB port.
4-I uninstall the driver from device manager (uninstall voice) and ask to be also uninstalled software from the PC
In some Italian forum, I found people with the same problems.
Solved by formatting PC. I would not do that ...
Thanks for your help, sorry for my English and my limited skills
AW: No ADB mode, driver issue?
Try to download the latest Android SDK and try to connect with that adb version. Adb with version < 1.0.31 will not work correctly with Android 4.2.2.
Sent from my Nexus 7 using xda app-developers app
AndDiSa said:
Try to download the latest Android SDK and try to connect with that adb version. Adb with version < 1.0.31 will not work correctly with Android 4.2.2.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I tried sdk but I have not solved.
I use Android 4.2.1. I'm having problems with the update! I can not update OTA (N7 stuck under the impending reboot). I also tried to download the zip file to upgrade the memory and flash it from recovery but the installation is not completed (error 7 build.prop).
I also tried to flash the factory image 4.2.1 (keeping userdata) and start again. Nothing, same mistakes!
Too many problems!
Marco16V said:
2-Sorry, where can I find Hardware IDs in Device Manager?
Click to expand...
Click to collapse
(Note I attached some pictures below)
From the Device Manager:
- Select the Device in question by right-clicking. Choose "Properties"
- A window with three tabs will appear: General, Driver, and Details. Select Details
- The "Property" combo-box-selector has 20 or 30 items - the 2nd one in the list is Hardware Ids. I attached two pictures from Win7-Pro-x64 (below)
But note as I said before: You should NOT be seeing the ADB endpoint under "Portable Devices" - if ADB Debugging is turned on in the OS, you should see it under "Android Phone" or something similar. In any event, the hardware Ids will identify it exactly
Marco16V said:
What is the difference between OS adb and TRWP adb?
Click to expand...
Click to collapse
Well, as far as the behavior of the USB driver on the PC, almost nothing. Unfortunately - for better or for worse - both TeamWin (TWRP) and CWM authors put their ADB interface on the bus with the VID/PID pair of USB\VID_18D1&PID_D001, whereas the OS puts all its USB interfaces on 18D1/4Exx.
So, even if you get a driver installed for the OS "adb" mode (say by using the Google SDK USB driver or the Asus Nexus 7 driver), it won't work for the custom recovery... unless you fix up the driver installer package to have the matching VID/PID pairs (18D1/D001) in the .INF file for that driver.
I think folks find this confusing - they think, "wait, I have a ADB driver installed" - why does it not work?
OK, there are a couple more things to try (at least before I give up). Roughly they try to answer these questions:
Q1) Is this a toolkit issue, or a driver issue?
Q2) Is it a prior driver you installed that you are not observing that is causing the problem?
The first one (Q1) is easiest to diagnose: when your PC Device Manager indicates that a device is "working normally" - AND THE VID/PID ID MATCHES WHAT YOU SHOULD EXPECT FOR THE MODE THE TABLET IS IN (regular OS, recovery boot, fastboot mode), can you communicate with the device from the Windows command line? e.g.,
Code:
C:\foo> cd C:\blahblah\sdk-platform-tools-directory
C:\blahblah\sdk-platform-tools-directory> fastboot devices
or
C:\blahblah\sdk-platform-tools-directory> adb devices
If you can communicate with the tablet from the command line - your device ID will be printed by the above commands, then you don't have a driver problem at all - there is something screwy about the way your toolkit is installed.
OK, Q2 -
When Windows installs a driver, it caches it into a kind of database. I suppose it is possible that a prior driver installation might be causing trouble. You can observe - from the device manager - all the drivers that are installed - even for devices that are not currently connected to your computer.
This is done by setting the "devmgr_show_nonpresent_devices=1" environment variable. It can be done semi-permanently this way, or for a single invocation of the device manager this way..
See the third image attached (devmgr-all-devices.jpg ) - it is my computer in that "show all devices" mode. See all that rubbish in there? It's from other Android devices (HTC, Samsung, etc).
You can walk through each one of those - even the devices that are not currently attached - and inspect the VID/PID pair to see if they happen to match the values that you are expecting to see for the different operating modes on the Nexus 7. I'll leave it up to you whether you want to do this or not; it is a bit tedious. Just don't start deleting drivers willy-nilly if you don't know what they are associated with.
Marco16V said:
Thanks for your help, sorry for my English and my limited skills
Click to expand...
Click to collapse
I am understanding everything you are saying - and your english is far better than my italian
good luck!
So, I've been trying to install the drivers for a generic rk29 rockship tablet. I had to go to adbdriver installer as a last resort. Yet, not even this helps. It says that it's incompatible with my x64 windows 8. picture attached. Any help is appreciated.
You can try running the installer in Compatibility Mode (right-click the file, go to Properties, set Compatibility Mode for Win7). That might work. Or it might not. Or it might bluescreen. But there's at least a chance it would work.
A bit misleading that it says xp/vista/7/8 x86 and x64 and then errors on x64.
I would try what gooddaytodie suggested and then contact the manufacturer to complain.
Or get virtualbox, install Linux within and use adb through that but that is an absolute faff to go through for 1 driver. You don't tend to need device specific adb drivers under Linux, just the adb itself.
I am install manually with disable signature process and its working on my Windows 8.1
Ah, completely unsigned driver. Good times... (not). Hope you trust the source.
I used the HTC drivers. I just extracted the files from the installer and installed the driver manually through device manager.
GoodDayToDie said:
Ah, completely unsigned driver. Good times... (not). Hope you trust the source.
Click to expand...
Click to collapse
Oh so fun....
Needed to disable the driver enforcement to install my stellaris launchpad on windows 8 which is entirely contrary to texas instruments installation instructions but I do not appear to be the only one that had to do that.
Can someone please send me a Google Drive link to the drivers they downloaded. My archives are claiming they're corrupted.
Hi guys,
When I connected my Nexus7(wifi 8G CM10) to my PC( Win 7) , OS always shows"unknown device".
I tryed to re-install N7 driver in my PC but failed.
I tryed to connect PC at N7 fastboot interface but also failed.
I tryed to change different USB cable with different PC, failed again.
It can charge my N7 when I connect to PC.
Is anybody meet the same question? could you please help me to solve this problem?
Thank you.
Which Android Composite ADB Interface Driver version did you try to install?
gghxr said:
Hi guys,
When I connected my Nexus7(wifi 8G CM10) to my PC( Win 7) , OS always shows"unknown device".
I tryed to re-install N7 driver in my PC but failed.
I tryed to connect PC at N7 fastboot interface but also failed.
I tryed to change different USB cable with different PC, failed again.
It can charge my N7 when I connect to PC.
Is anybody meet the same question? could you please help me to solve this problem?
Thank you.
Click to expand...
Click to collapse
install this and then install the drivers. should be easy
You should also uninstall any existing Android 1.0 or Nexus 7 drivers from Device Manager (you can type it in the start menu, or WIN+R and run devmgmt.msc) before moving forward.
Install Nexus 7 windows drivers from Asus site. They release proper drivers for windows 7 and 8 and nobody seems to know about it.
http://support.asus.com/Download.aspx?SLanguage=en&m=Nexus+7&p=20&s=16
Also I have a tutorial on how to properly setup adb for any device in win 7 and 8 no need to download anything beyond 2Mb here:
http://forum.xda-developers.com/showthread.php?t=2270429
Sent from my SPH-L710 using Tapatalk v2
Team SXTP
I'm trying to get my ADB interface working via the male-to-male USB cable. I can't install the drivers. I'm running windows 7 64 bit and copying the DLL's from i386 (I have an intel processor) to c:\Windows\SysWOW64 then using the command prompt in administrator mode: regsvr32 "filename".dll and I get the message "the module 'module name' was loaded but the entry-point DIIRegisterServer was not found. Make sure that 'module name.dll' is a valid DLL or OCX file and then try again."
I've also tried installing the drivers from the device manager and selecting a path to the driver folder.
Af far as I can tell these are the universal USB drivers. Any ideas?
Phoenix4848 said:
I'm trying to get my ADB interface working via the male-to-male USB cable. I can't install the drivers. I'm running windows 7 64 bit and copying the DLL's from i386 (I have an intel processor) to c:\Windows\SysWOW64 then using the command prompt in administrator mode: regsvr32 "filename".dll and I get the message "the module 'module name' was loaded but the entry-point DIIRegisterServer was not found. Make sure that 'module name.dll' is a valid DLL or OCX file and then try again."
I've also tried installing the drivers from the device manager and selecting a path to the driver folder.
Af far as I can tell these are the universal USB drivers. Any ideas?
Click to expand...
Click to collapse
AARRGGHH! Windows and its damn' driver problems! First did you disable driver verification? If not Google it. Then install MoDaCo's drivers using the Windows GUI tools (IIRC you get there from Device Manager). If all that doesn't "take", my best advice is to wipe all trace of Windows off your computer and install a sane operating system. Too radical a fix? OK, your funeral, but here's a halfway fix: download this Puppy Linux live-CD .iso that I've doctored with Fastboot and ADB binaries, and burn it to a CD.
http://www.mediafire.com/download/62oh30gzjzvsbew/sulu2-528.007-android.iso
Make sure you know how to burn a CD from a .iso file. The end result will have files and folders, not just a single .iso file on it. It's a bootable CD, so you guessed it, boot your PC to the CD. Don't try to run it in a VM, it won't work. Click on the terminal icon on the desktop and you have a box that looks and acts like the Windows DOS box; the OS commands are somewhat different but the fastboot and adb ones are exactly the same. In fact the terminal is the same as the one in Android, and since both devices are Linux now, driver problems disappear!
Do whatever dastardly deeds you want to the MOJO with Fastboot or ADB, eject the Linux disc, reboot--and as far as your PC is concerned, it never happened. The live-CD won't leave a trace unless you specifically tell it to.
Most of the tutorials on this MOJO forum give commands like "fastboot-linux flash twrp(version), this is MoDaCo's version of Fastboot. I put this live-CD together using Google's binaries so that command would look like "fastboot flash twrp(version). Keep in mind that with the MOJO the device ID string is mandatory; see the TWRP recovery thread for details, but you can't just send "fastboot devices", it won't work, you must send fastboot -i 0x0738 devices, or go straight to flashing or booting.
Well I don't know if I just cleared the waters some or just stirred it up more, but good luck and I hope I helped a little anyway!
This was how I was able to install my drivers on my Win 7.
Assuming that you've downloaded the superboot-mmm file and you've extracted to your C: drive:
1. Go to Devices and Printers under Control Panel
2. Right Click on the Fastboot device, and click on Properties
3. Click on the Driver tab, and click on Update Driver (or click on Properties)
4. Click on Browse My Computer For Driver Software (manually)
5. Browse the following location (or copy and paste this: C:\r3-mojo-superboot-mmm\windows.driver)
6. Select Next
7. The driver will be installed
If you now replug the MOJO, you should be able to see Madcatz ADB Interface under Hardware Tab when you click Properties
Source: my blog
Hope it helps.
Yes! Thank you
Yes, the problem was I was going a folder too deep in selecting the driver from the device manager. Thank you.