Hey guys, I have the 910v I tried to manually update with Odin to 5.1.1. This isnt rooted or unlocked. Odin failed with the following error on my phone:
SW REV CHECK FAIL : [tz]Fused 2 > Binary 1
I have tried the VZW Software repair with no luck, as well as PIT file. Please help me get this thing working again! It just boots to a screen saying Software update failed and to run repair software on computer.
greg_gorrell said:
Hey guys, I have the 910v I tried to manually update with Odin to 5.1.1. This isnt rooted or unlocked. Odin failed with the following error on my phone:
SW REV CHECK FAIL : [tz]Fused 2 > Binary 1
I have tried the VZW Software repair with no luck, as well as PIT file. Please help me get this thing working again! It just boots to a screen saying Software update failed and to run repair software on computer.
Click to expand...
Click to collapse
http://forum.xda-developers.com/note-4-verizon/general/debrick-procedure-t3370661
Thanks for the reply. I wish I would have saw that earlier. I ended up fixing it by re-flashing the PIT file.
History:
Phone need to unlock from Germany 02
Using Z3x box newest software it failed.
try flashing combination file COMBINATION_FAC_FA51_A510FXXU3API1
it failed!
Now phone is in factory binary mode.
Tried this firmware from Z3x support A510F_XXU2APC4_VFG2APC2
also failed in: sboot.bin and param.bin
Now I'm trying to download 6.01 firmware from Germany 02 I hope this time flashing with odin continues and will not stop.
Can you you give me any advise pls.
WINPINPH said:
History:
Phone need to unlock from Germany 02
Using Z3x box newest software it failed.
try flashing combination file COMBINATION_FAC_FA51_A510FXXU3API1
it failed!
Now phone is in factory binary mode.
Tried this firmware from Z3x support A510F_XXU2APC4_VFG2APC2
also failed in: sboot.bin and param.bin
Now I'm trying to download 6.01 firmware from Germany 02 I hope this time flashing with odin continues and will not stop.
Can you you give me any advise pls.
Click to expand...
Click to collapse
First one looks like Rev 3 lollipop firmware, second looks like Rev 2 lollipop firmware.
Flash MM firmware.
I got this S7, wanted to flash 930U firmware to use T-Mobile but a failed flash has me in a boot loop. I fully updated before trying to flash, so it is I assume on the newest bootloader, etc.
I have attempted the newest firmware files that I can find (G930AUCS4BQL1) but am still getting the SW REV CHECK FAIL through Odin.
Are there files available that will fix this, do I just need to wait for them to come out, or have I bricked this thing?
Thanks for any help and have a great day!
Update:
- Using PrinceComsy Odin results in: FAIL! (Auth)
- USB Debugging is OFF and I am unable to boot to change that
- I am leaving the BL file blank in ODIN
perhaps you should try using offcial odin when flashing official images.
try version 3.12.3. whatever you do, don't use the princecomsy version unless for flashing engboot
Bricked my s8+ hope someone can help!
Model SM-G955F
I tried to root it couldn't get some stuff working I ended up going in dev options and turned OEM unlocking either on or off..Then tried to root... Ended up getting the FRP lock and tried to flash to basic rom again.
I'm currently trying to use Odin to install this rom:
DOWNLOAD SAMSUNG GALAXY S8+ SM-G955F EVR UNITED KINGDOM (EE) G955FXXS6DTA1 FIRMWARE on SAMMOBILE
If I try turn it on it says
An error has occured while updating the device software. Use the emergency recovery function in the smart switch pc software. I tried to use smart switch to fix it but they removed the section where you search for models and I used a old verison which said the device was not supported
If I try use odin whilst in download mode it gives the following error
SW REV. Check fail )bootloader) device: 7 Binary: 6 (I think it says SW REV my eyes are terrible and its hard to read lol)
I'm thinking about taking the loss and just selling it on ebay as broken unless someone can help.
Thanks guys
Tobbo88 said:
Bricked my s8+ hope someone can help!
Model SM-G955F
I tried to root it couldn't get some stuff working I ended up going in dev options and turned OEM unlocking either on or off..Then tried to root... Ended up getting the FRP lock and tried to flash to basic rom again.
I'm currently trying to use Odin to install this rom:
DOWNLOAD SAMSUNG GALAXY S8+ SM-G955F EVR UNITED KINGDOM (EE) G955FXXS6DTA1 FIRMWARE on SAMMOBILE
If I try turn it on it says
An error has occured while updating the device software. Use the emergency recovery function in the smart switch pc software. I tried to use smart switch to fix it but they removed the section where you search for models and I used a old verison which said the device was not supported
If I try use odin whilst in download mode it gives the following error
SW REV. Check fail )bootloader) device: 7 Binary: 6 (I think it says SW REV my eyes are terrible and its hard to read lol)
I'm thinking about taking the loss and just selling it on ebay as broken unless someone can help.
Thanks guys
Click to expand...
Click to collapse
You are trying to flash older firmware than what is on your phone. Device 7 = current bootloader version on phone.Binary 6 = bootloader your trying to flash.
When looking at firmware names the 5th number from the right is the bootloader version number of the firmware you are downloading.You will need version 7 bootloader firmware or higher to flash in Odin.
spawnlives said:
You are trying to flash older firmware than what is on your phone. Device 7 = current bootloader version on phone.Binary 6 = bootloader your trying to flash.
When looking at firmware names the 5th number from the right is the bootloader version number of the firmware you are downloading.You will need version 7 bootloader firmware or higher to flash in Odin.
Click to expand...
Click to collapse
The one I'm downloading says its the latest version tho
Tobbo88 said:
The one I'm downloading says its the latest version tho
Click to expand...
Click to collapse
I have checked and for EVR (EE) version 6 bootloader is the latest one out.
All I can suggest is wait for an update or flash BTU firmware which is on version 7 firmware.
For downloading latest firmware use PC app called frija or samfirm. Far quicker than downloading through sammobile.
Frija
https://forum.xda-developers.com/s10-plus/how-to/tool-frija-samsung-firmware-downloader-t3910594
Or samfirm
https://samfirm.en.lo4d.com/windows
spawnlives said:
I have checked and for EVR (EE) version 6 bootloader is the latest one out.
All I can suggest is wait for an update or flash BTU firmware which is on version 7 firmware.
For downloading latest firmware use PC app called frija or samfirm. Far quicker than downloading through sammobile.
Frija
https://forum.xda-developers.com/s10-plus/how-to/tool-frija-samsung-firmware-downloader-t3910594
Or samfirm
https://samfirm.en.lo4d.com/windows
Click to expand...
Click to collapse
Thanks loads for your help!
I've got the file manage to get around 90% of the bar done then it fails just after saying cache.img then I get red error on the screen which says Custom Binary(USERDATA) Blocked by FRP Lock
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas?
Thanks again
Hi guys. I have 4 year old Samsung S8 (Indian version dual sim and exynos) which all of sudden one morning decided to stop switching on and doesnt charge when plugged in. No amount of recovery/download mode button combinations worked. then after 2 days it seemed to turn on through recovery mode when I plugged in for charge.Tried to reboot, it started booting, my jome screen appeared and while i was trying to unlock it, it turnt black and switched off. So I did some small research and found samfw (my first big mistake) and downloaded the INS firmware latest one from there since it showed that the firmware coincided with INS India region. The flashing worked and passed. But again when I reboot, the same issue of turning off after 2 mins of use (regardless how much percent the battery state is) occured. I got into the recovery mode and I see the following message when I try to do a wipe cache and wipe/factory reset.
"E: [libfs_mgr] is_dt_compatible (): firmware info was not valid : '/ proc / device-tree / firmware / android / compatible': No such file or directory." [attaching images on the error]
Due to my lack of initial knowledge about PDA and CSC and which were reliable websites to download, I realised from sammobile that the firmware I downloaded and flashed wasnt actually INS. Here, it showed another number which did not coincide with the one I found on samfw. Then I downloaded that and I tried to flash the latest INS firmware I recieved the following error on Odin software.
"<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> param.bin
<ID:0/005> userdata.img
<ID:0/005> Home Binary Download
<ID:0/005> Total Binary size: 4186 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> up_param.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
And the error I see on my download mode samsung s8 is as follows
"SW REV CHECK FAIL DEVICE - 12, BINARY - 11"
Also, another time this came up "KERNEL REV CHECK FAIL DEVICE - 12,BINARY - 10"
I seemed to reach nowhere when I try to flash the INS firmwares and these errors keep occurring. Just to keep things clear, my phone hasn't been involved in rooting, any accidents, any repairs prior to this incident and also I have the latest Odin version and run as administrator each time. Kindly help. Thanks
The firmware details I first downloaded.
Download Galaxy S8 SM-G950FD (INS) G950FXXUCDUD1 in Samfw - Samsung firmware download
Galaxy S8 SM-G950FD (INS - India) G950FXXUCDUD1 Pie(Android 9) samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
PDA VERSION G950FXXUCDUD1
CSC VERSION G950FOXMCDUF1
The firmware details I second downloaded.
Download Samsung Galaxy S8 SM-G950FD INS India G950FXXSBDUA3 firmware
Fast download latest Samsung Galaxy S8 firmware SM-G950FD from India with G950FXXSBDUA3 and Android version 9
www.sammobile.com
PDA VERSION G950FXXSBDUA3
CSC VERSION G950FOXMBDTJ1
In 2nd case there is a mismatch between versions on mobile and firmware downloaded by you as evident from error:
CHECK FAIL DEVICE - 12,BINARY - 10
You may download latest Indian firmware for your mobile Samsung Galaxy S8 (SM-G950FD) here :
Download Galaxy S8 SM-G950FD (INS) G950FXXUCDUD1 in Samfw - Samsung firmware download
Galaxy S8 SM-G950FD (INS - India) G950FXXUCDUD1 Pie(Android 9) samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
Download Odin and follow instructions on this page ( Don't download firmware from this page):
Download Samsung Galaxy S8 SM-G950FD INS India G950FXXSBDUA3 firmware
Fast download latest Samsung Galaxy S8 firmware SM-G950FD from India with G950FXXSBDUA3 and Android version 9
www.sammobile.com
I'm also facing similar issue. Just like you, I have tried factory reset but then mobile won't even boot up. So I visited Samsung store and they told mobile its water damage. Flashed mobile with latest firmware using odin which was successful. But still same issue is persistent. After flashing with latest firmware :-
1. Mobile booted and i was able to accept terms and conditions, skipped wifi connectivity and before landing on home screen mobile switched off.
2. Again restarted and I went through step 1, 3-4 times. After few failures mobile won't even turn ON.
3. Once mobile is completely discharged, you can plug it in and start from Sl. No. 1. ( a futile exercise)
If so many users are facing identical issue, I wonder whether samsung's security updates have messed up the mobile intentionally?
Anyways, let me know if you find a fix.
CktOnline said:
In 2nd case there is a mismatch between versions on mobile and firmware downloaded by you as evident from error:
CHECK FAIL DEVICE - 12,BINARY - 10
You may download latest Indian firmware for your mobile Samsung Galaxy S8 (SM-G950FD) here :
Download Galaxy S8 SM-G950FD (INS) G950FXXUCDUD1 in Samfw - Samsung firmware download
Galaxy S8 SM-G950FD (INS - India) G950FXXUCDUD1 Pie(Android 9) samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
Download Odin and follow instructions on this page ( Don't download firmware from this page):
Download Samsung Galaxy S8 SM-G950FD INS India G950FXXSBDUA3 firmware
Fast download latest Samsung Galaxy S8 firmware SM-G950FD from India with G950FXXSBDUA3 and Android version 9
www.sammobile.com
I'm also facing similar issue. Just like you, I have tried factory reset but then mobile won't even boot up. So I visited Samsung store and they told mobile its water damage. Flashed mobile with latest firmware using odin which was successful. But still same issue is persistent. After flashing with latest firmware :-
1. Mobile booted and i was able to accept terms and conditions, skipped wifi connectivity and before landing on home screen mobile switched off.
2. Again restarted and I went through step 1, 3-4 times. After few failures mobile won't even turn ON.
3. Once mobile is completely discharged, you can plug it in and start from Sl. No. 1. ( a futile exercise)
If so many users are facing identical issue, I wonder whether samsung's security updates have messed up the mobile intentionally?
Anyways, let me know if you find a fix.
Click to expand...
Click to collapse
Ahh great, Because now the issue is since there is no option for downgrade. If you search online with the firmware name G950FXXUCDUD1 as mentioned on samfw.com, it shows that it is not from India. Binary 12 for India hasnt been released yet. So not really sure what to do. I am waiting for any Samsung guru to answer this. Because I just cannot downgrade apparently. Yeah, should try to get in touch with the service center once it opens up.
kazeklozer said:
Ahh great, Because now the issue is since there is no option for downgrade. If you search online with the firmware name G950FXXUCDUD1 as mentioned on samfw.com, it shows that it is not from India. Binary 12 for India hasnt been released yet. So not really sure what to do. I am waiting for any Samsung guru to answer this. Because I just cannot downgrade apparently. Yeah, should try to get in touch with the service center once it opens up.
Click to expand...
Click to collapse
That binary error is due to you trying to flash older filmware than what is already on the phone. You need to flash the same or newer filmware.
You can download Frija for PC to download Samsung filmware and it gives you the latest, just put your model number and CSC number (INS in your case) and it will download that for you, it also downloads at a good speed and obviously for free. Link to Frija below.
[Tool] Frija - Samsung firmware downloader/checker
Duplicate thread closed https://forum.xda-developers.com/s10-plus/how-to/tool-frija-samsung-firmware-downloader-t3910594 Hey Guys :) Frija is a new tool (successor of now depreciated tool SamFirm) which allows users to download latest firmware...
forum.xda-developers.com
kazeklozer said:
The firmware details I first downloaded.
Download Galaxy S8 SM-G950FD (INS) G950FXXUCDUD1 in Samfw - Samsung firmware download
Galaxy S8 SM-G950FD (INS - India) G950FXXUCDUD1 Pie(Android 9) samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
PDA VERSION G950FXXUCDUD1
CSC VERSION G950FOXMCDUF1
The firmware details I second downloaded.
Download Samsung Galaxy S8 SM-G950FD INS India G950FXXSBDUA3 firmware
Fast download latest Samsung Galaxy S8 firmware SM-G950FD from India with G950FXXSBDUA3 and Android version 9
www.sammobile.com
PDA VERSION G950FXXSBDUA3
CSC VERSION G950FOXMBDTJ1
Click to expand...
Click to collapse
Can you tell me how to?
I try to download what yo post.
but my s8 show an error has occured....................
Any luck on the INS firmware for SM-G950F G950FXXUCDUD1. I am also stuck on boot loop and had flashed the DDT version as i couldn't find the latest INS binary. Please help