Hey guys, I have the 910v I tried to manually update with Odin to 5.1.1. This isnt rooted or unlocked. Odin failed with the following error on my phone:
SW REV CHECK FAIL : [tz]Fused 2 > Binary 1
I have tried the VZW Software repair with no luck, as well as PIT file. Please help me get this thing working again! It just boots to a screen saying Software update failed and to run repair software on computer.
greg_gorrell said:
Hey guys, I have the 910v I tried to manually update with Odin to 5.1.1. This isnt rooted or unlocked. Odin failed with the following error on my phone:
SW REV CHECK FAIL : [tz]Fused 2 > Binary 1
I have tried the VZW Software repair with no luck, as well as PIT file. Please help me get this thing working again! It just boots to a screen saying Software update failed and to run repair software on computer.
Click to expand...
Click to collapse
http://forum.xda-developers.com/note-4-verizon/general/debrick-procedure-t3370661
Thanks for the reply. I wish I would have saw that earlier. I ended up fixing it by re-flashing the PIT file.
Related
Hi there
I have a 900W8 note 3. I upgraded to the newest firmware via kies. it worked perfectly then i wanted to root it.
Instead of using Odin i used Kingo and now my phone is stuck on a recovery loop.
I try and access recovery up+home+ power and nothing happens it simply keeps looping
I can access download down+power+home.
any suggestions how i can get out of this?
Thank you!
I followed these instructions to the dot
androidrootzDOTCOM/2013/10/how-to-unrootunbrick-galaxy-note-3.html
and it failed
what i did:
1) it was detected o: (com4)
2PDA selected was tar.md5
3) deselected F. Reset Time
i clicked start and "FAIL"
phone says SW REV CHECK FAIL: (SB(1) Fused 2> Binary 1
computer says:
FAIL! (auth)
all threads completed (succeed 0 / failed 0)
What does newst firmware mean? KK? If yes you need to use the correct recovery or autoroot image for kk or below kk it seems you flashed the wrong version
/edit it seems you try to downgrade
Hundsbuah said:
What does newst firmware mean? KK? If yes you need to use the correct recovery or autoroot image for kk or below kk it seems you flashed the wrong version
/edit it seems you try to downgrade
Click to expand...
Click to collapse
Yeah it was Kitkat. I had to flash recovery and it worked.
HI dev,i have just used this phone in about a month .a few days ago i have decided to root this phone,i am using the odin method .it roots very well untill i have accidently opened the recovery mode and a message appears 'custom binary blocked by frp' wth.and then i downloaded the samsung kies and try to recover my phone but its failed on detecting my device.and then i will use the odin method to flash the official rom on this phone.i was wondering if the proccess will be interupted by the frp lock again.please answer me.thanks in advance
Go to developer options and on OEM unlock and then do ....
I came across the same issue.
Solution:
1. Remove all google account from your device.
2. Disable screen lock.
Hi ... im ram... my samsung sm-j510gn/ds blocked... anyone help me give a custom rom for me...
S/n : RF8H62A0ATV
ramar7396 said:
Hi ... im ram... my samsung sm-j510gn/ds blocked... anyone help me give a custom rom for me...
S/n : RF8H62A0ATV
Click to expand...
Click to collapse
flash stock rom using odin
SoUnd001 said:
flash stock rom using odin
Click to expand...
Click to collapse
I am having the same issue, after install this rom and Odin doesnt help. Same error message.
rodrigo82 said:
I am having the same issue, after install this rom and Odin doesnt help. Same error message.
Click to expand...
Click to collapse
Odin will always fix it just select entire stock rom file in ap in odin go to options and select phone bootloader update
SoUnd001 said:
Odin will always fix it just select entire stock rom file in ap in odin go to options and select phone bootloader update
Click to expand...
Click to collapse
I tried...
Error on Odin:
<ID:0/004> FAIL! (Auth)
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And appears that message on phone:
secure download enabled
SV REV CHECK FAIL : [aboot] Fused 2 > Binary 1.
rodrigo82 said:
I tried...
Error on Odin:
<ID:0/004> FAIL! (Auth)
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And appears that message on phone:
secure download enabled
SV REV CHECK FAIL : [aboot] Fused 2 > Binary 1.
Click to expand...
Click to collapse
You tried to downgrade it or is same firmware try downloading MM firmware from romania ROM
SoUnd001 said:
You tried to downgrade it or is same firmware try downloading MM firmware from romania ROM
Click to expand...
Click to collapse
Thanks. Ill try later!
SoUnd001 said:
You tried to downgrade it or is same firmware try downloading MM firmware from romania ROM
Click to expand...
Click to collapse
Odin doesn't help me. Not sucessfull.
I tried "Caboomi's_Recovery_img2tar_odin_maker" not sucessfull...
Then I tried Heimdall... Not sucessfull too...
Then I tried to cry. Doesn't change anything... LOL. :laugh::crying:
Ocotplus will help me?
Just boot your phone in Download mode ( Power Key + Home Key + Volume Down Key)
Then try to reinstall stock rom on your device..
Stock rom is needed to be same on region..
Install it with help of odin.
It successfully works..
pkdabhi8 said:
Just boot your phone in Download mode ( Power Key + Home Key + Volume Down Key)
Then try to reinstall stock rom on your device..
Stock rom is needed to be same on region..
Install it with help of odin.
It successfully works..
Click to expand...
Click to collapse
As I said before, I did everything with Odin and didn't work.
But thanks to help.
ME TOO!
eqmalariev999 said:
HI dev,i have just used this phone in about a month .a few days ago i have decided to root this phone,i am using the odin method .it roots very well untill i have accidently opened the recovery mode and a message appears 'custom binary blocked by frp' wth.and then i downloaded the samsung kies and try to recover my phone but its failed on detecting my device.and then i will use the odin method to flash the official rom on this phone.i was wondering if the proccess will be interupted by the frp lock again.please answer me.thanks in advance
Click to expand...
Click to collapse
No man it will not be interrupted by frp lock i have had this problem and was fixed by flashing stock rom by odin
Recovery
hi i installed recovery from odin and it was successful but i cant open it ..instead of opening recovery it starts up ...any solution ??
pepeline said:
hi i installed recovery from odin and it was successful but i cant open it ..instead of opening recovery it starts up ...any solution ??
Click to expand...
Click to collapse
*Read entire post before trying*
Repeat the install process with Odin,
keep ur fingers on the Vol. Up and Power buttons (not pressing them),
click Start and just before it's finished flashing push and hold those buttons until TWRP logo appears,
release and wait for loading to finish.
Hope that helps
(sometimes u have to also hold down the Home button along with Vol. Up & Power buttons)
History:
Phone need to unlock from Germany 02
Using Z3x box newest software it failed.
try flashing combination file COMBINATION_FAC_FA51_A510FXXU3API1
it failed!
Now phone is in factory binary mode.
Tried this firmware from Z3x support A510F_XXU2APC4_VFG2APC2
also failed in: sboot.bin and param.bin
Now I'm trying to download 6.01 firmware from Germany 02 I hope this time flashing with odin continues and will not stop.
Can you you give me any advise pls.
WINPINPH said:
History:
Phone need to unlock from Germany 02
Using Z3x box newest software it failed.
try flashing combination file COMBINATION_FAC_FA51_A510FXXU3API1
it failed!
Now phone is in factory binary mode.
Tried this firmware from Z3x support A510F_XXU2APC4_VFG2APC2
also failed in: sboot.bin and param.bin
Now I'm trying to download 6.01 firmware from Germany 02 I hope this time flashing with odin continues and will not stop.
Can you you give me any advise pls.
Click to expand...
Click to collapse
First one looks like Rev 3 lollipop firmware, second looks like Rev 2 lollipop firmware.
Flash MM firmware.
When rooting my S7, it got stuck in a bootloop. When I attempted to flash back to the factory firmware, ODIN failed, and now my phone is totally bricked. I can enter download mode, but not recovery mode. When attempting to flash the latest update firmware (04/19), it continues to fail with a "SW REV CHECK FAIL: [system]Fused 3 > Binary 1" error code, which I've found is supposed to mean that I'm downgrading firmware, but it's simply not the case. I've checked my drivers, tried different versions of ODIN, etc. but nothing works.
Any ideas?
maelstromm15 said:
When rooting my S7, it got stuck in a bootloop. When I attempted to flash back to the factory firmware, ODIN failed, and now my phone is totally bricked. I can enter download mode, but not recovery mode. When attempting to flash the latest update firmware (04/19), it continues to fail with a "SW REV CHECK FAIL: [system]Fused 3 > Binary 1" error code, which I've found is supposed to mean that I'm downgrading firmware, but it's simply not the case. I've checked my drivers, tried different versions of ODIN, etc. but nothing works.
Any ideas?
Click to expand...
Click to collapse
Try a couple different firmwares, for me it hasn't always worked on my first try. You could also try the prince comsey Odin instead that may or may not help depending on which firmware you are flashing.
maelstromm15 said:
When rooting my S7, it got stuck in a bootloop. When I attempted to flash back to the factory firmware, ODIN failed, and now my phone is totally bricked. I can enter download mode, but not recovery mode. When attempting to flash the latest update firmware (04/19), it continues to fail with a "SW REV CHECK FAIL: [system]Fused 3 > Binary 1" error code, which I've found is supposed to mean that I'm downgrading firmware, but it's simply not the case. I've checked my drivers, tried different versions of ODIN, etc. but nothing works.
Any ideas?
Click to expand...
Click to collapse
Give bra1 build a try if you haven't. I upgraded too far with an AT&T firmware and had to Odin bra1 first on the U variant firmware, then could Odin bra1 V variant firmware. Here is the V variant you can try first: https://androidfilehost.com/?fid=962187416754456736
Also post your bootloader info. See if your phone still shows G930V or if it's switched to G930U variant and if it says build/baseband version post that too please. Both "too new of a bootloader" and mismatched models can be the cause of that
Edit: Here is another full version of the 4/19 firmware you mention: https://androidfilehost.com/?fid=818070582850509181
Repair Assistant will restore your phone https://www.verizonwireless.com/support/knowledge-base-80201/
DabbingDuke said:
Repair Assistant will restore your phone https://www.verizonwireless.com/support/knowledge-base-80201/
Click to expand...
Click to collapse
Sadly this can fail from even a 930U vs 930V variant difference. It's great when it works but not a great fallback if you have tried any other variant Odin/rom
djh816 said:
Give bra1 build a try if you haven't. I upgraded too far with an AT&T firmware and had to Odin bra1 first on the U variant firmware, then could Odin bra1 V variant firmware. Here is the V variant you can try first: https://androidfilehost.com/?fid=962187416754456736
Also post your bootloader info. See if your phone still shows G930V or if it's switched to G930U variant and if it says build/baseband version post that too please. Both "too new of a bootloader" and mismatched models can be the cause of that
Edit: Here is another full version of the 4/19 firmware you mention: https://androidfilehost.com/?fid=818070582850509181
Click to expand...
Click to collapse
Thanks for your help here!
I went back to BRA1 build but can't seem to change back to VZW
In download mode it says that it is a G930A
Code:
<ID:0/038> Odin engine v(ID:3.1207)..
<ID:0/038> File analysis..
<ID:0/038> skip file list for home binary
<ID:0/038> persist.img.ext4
<ID:0/038> Home Binary Download
<ID:0/038> SetupConnection..
<ID:0/038> Initialzation..
<ID:0/038> FAIL! SHA256 is invalid
<OSM> All threads completed. (succeed 0 / failed 1)
I seem to remember Odin being an issue for me too at some point, do you have Odin v3.12 PrinceComsy?
I do have his Odin. For some reason it comes up a Chinese error when trying to run it. Will redownload tomorrow again.
Do you have any specific firmware that should work? Doesn't necessarily need to be VZW as I'm traveling and will use a different GSM sim.
Thanks!
turnert said:
Try a couple different firmwares, for me it hasn't always worked on my first try. You could also try the prince comsey Odin instead that may or may not help depending on which firmware you are flashing.
Click to expand...
Click to collapse
PalmCentro said:
I do have his Odin. For some reason it comes up a Chinese error when trying to run it. Will redownload tomorrow again.
Do you have any specific firmware that should work? Doesn't necessarily need to be VZW as I'm traveling and will use a different GSM sim.
Thanks!
Click to expand...
Click to collapse
I tested out one of the Oreo AT&T builds and ended up having to revert. Here was my route:
1) odin SM-G930U_1_20170516105039_fspus9jwu3_fac.zip
2) download verizon wireless software upgrade tool, restore to U variant firmware it offers (in my case BRA1)
3) odin G930VVRS4BRA1_G930VVZW4BRA1_VZW
If that doesn't work, try other full odin builds recent/old. Good luck!
Edit: I assume you know this but all USA variants with locked bootloader are the same hardware so A, U, V variants should all "work" but then its up to which version of firmware, which bootloader you currently have, which model you current have shown in bootloader. I had the best luck switching the A variant back to U, then to V. When i tried to go directly from the A firmware back to V variant directly, odin failed and Verizon's tool was useless cause it wasn't a V variant model at the time.
Bricked my s8+ hope someone can help!
Model SM-G955F
I tried to root it couldn't get some stuff working I ended up going in dev options and turned OEM unlocking either on or off..Then tried to root... Ended up getting the FRP lock and tried to flash to basic rom again.
I'm currently trying to use Odin to install this rom:
DOWNLOAD SAMSUNG GALAXY S8+ SM-G955F EVR UNITED KINGDOM (EE) G955FXXS6DTA1 FIRMWARE on SAMMOBILE
If I try turn it on it says
An error has occured while updating the device software. Use the emergency recovery function in the smart switch pc software. I tried to use smart switch to fix it but they removed the section where you search for models and I used a old verison which said the device was not supported
If I try use odin whilst in download mode it gives the following error
SW REV. Check fail )bootloader) device: 7 Binary: 6 (I think it says SW REV my eyes are terrible and its hard to read lol)
I'm thinking about taking the loss and just selling it on ebay as broken unless someone can help.
Thanks guys
Tobbo88 said:
Bricked my s8+ hope someone can help!
Model SM-G955F
I tried to root it couldn't get some stuff working I ended up going in dev options and turned OEM unlocking either on or off..Then tried to root... Ended up getting the FRP lock and tried to flash to basic rom again.
I'm currently trying to use Odin to install this rom:
DOWNLOAD SAMSUNG GALAXY S8+ SM-G955F EVR UNITED KINGDOM (EE) G955FXXS6DTA1 FIRMWARE on SAMMOBILE
If I try turn it on it says
An error has occured while updating the device software. Use the emergency recovery function in the smart switch pc software. I tried to use smart switch to fix it but they removed the section where you search for models and I used a old verison which said the device was not supported
If I try use odin whilst in download mode it gives the following error
SW REV. Check fail )bootloader) device: 7 Binary: 6 (I think it says SW REV my eyes are terrible and its hard to read lol)
I'm thinking about taking the loss and just selling it on ebay as broken unless someone can help.
Thanks guys
Click to expand...
Click to collapse
You are trying to flash older firmware than what is on your phone. Device 7 = current bootloader version on phone.Binary 6 = bootloader your trying to flash.
When looking at firmware names the 5th number from the right is the bootloader version number of the firmware you are downloading.You will need version 7 bootloader firmware or higher to flash in Odin.
spawnlives said:
You are trying to flash older firmware than what is on your phone. Device 7 = current bootloader version on phone.Binary 6 = bootloader your trying to flash.
When looking at firmware names the 5th number from the right is the bootloader version number of the firmware you are downloading.You will need version 7 bootloader firmware or higher to flash in Odin.
Click to expand...
Click to collapse
The one I'm downloading says its the latest version tho
Tobbo88 said:
The one I'm downloading says its the latest version tho
Click to expand...
Click to collapse
I have checked and for EVR (EE) version 6 bootloader is the latest one out.
All I can suggest is wait for an update or flash BTU firmware which is on version 7 firmware.
For downloading latest firmware use PC app called frija or samfirm. Far quicker than downloading through sammobile.
Frija
https://forum.xda-developers.com/s10-plus/how-to/tool-frija-samsung-firmware-downloader-t3910594
Or samfirm
https://samfirm.en.lo4d.com/windows
spawnlives said:
I have checked and for EVR (EE) version 6 bootloader is the latest one out.
All I can suggest is wait for an update or flash BTU firmware which is on version 7 firmware.
For downloading latest firmware use PC app called frija or samfirm. Far quicker than downloading through sammobile.
Frija
https://forum.xda-developers.com/s10-plus/how-to/tool-frija-samsung-firmware-downloader-t3910594
Or samfirm
https://samfirm.en.lo4d.com/windows
Click to expand...
Click to collapse
Thanks loads for your help!
I've got the file manage to get around 90% of the bar done then it fails just after saying cache.img then I get red error on the screen which says Custom Binary(USERDATA) Blocked by FRP Lock
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas?
Thanks again