I have a pc with these components :
MOTHERBOARD : ASUS M4N68T-M
CPU : AMD ATHLON II X2 265 PROCESSOR 3.3 GHZ
RAM : 4GB DDR3
HDD : 500 GB SATA
DVD PLAYER : LITEON I HAS 524B and Optichiar DVD
Video Cards : NVIDIA GEFORCE 7025/NFORCE 630A ( but i wan to change )
Windows 8 support my computer ?
I'm not an expert but I'd state this:
If it can run W7 it can run W8. Actually I'd dare to say "If it can run XP, it can run W8". According to the requirements, you can. You'll tell us in two days
with such requirements windows 8 will run smoothly.
I have tried installing android x86 to an external hdd and booting from it, and I also tried simply running the live version but nothing works, it just gets stuck on the logo screen. I tried the android-x86_64-6.0-r1 version, the Android-x86_6.0 - Remix OS for PC - 64 bit and the android-x86-4.4-r5
I also tried installing the Phoenix OS x86, but I get an error that my device isn't compatible even though it has an Intel Atom cpu which should work as far as I know.
This is the exact model I have: HP Pavilion X2 10-n107nc
I would really appreciate some advice, because I have been trying for days and I just can't get it to work and I am running out of ideas.
Also saw this model in UK and also don't want to wait for chuwi for 3 weeks . As far as i know In chinese models of intel atom tablets there is special bootloaders to boot two systems (iwork, chuwi) and on x64 architecture you can install grub and android image, the best option is to write to intel atom section
Hi all, I've searched online for a solution, but anything, now I've found this section on XDA.
I've used Rufus to burn a USB stick with Phoenix installer iso from the official site, I've installed fine in my hard disk (to get windows and Phoenix separate), but when I try to boot it get stucked on Android x86_64 command line.
My specs are:
CPU: Intel Pentium dual core E5500
GPU: Integrated Intel g41 express
Motherboard: Acer m275 (the Acer veriton mini atx)
I've tried some kernel commands like nomodeset but nothing.
I have this problem with all Android iso, the same error.
Thanks in advance.
(Sorry for my bad English, I'm Italian)
same problem here...
Evasi0n3r said:
Hi all, I've searched online for a solution, but anything, now I've found this section on XDA.
I've used Rufus to burn a USB stick with Phoenix installer iso from the official site, I've installed fine in my hard disk (to get windows and Phoenix separate), but when I try to boot it get stucked on Android x86_64 command line.
My specs are:
CPU: Intel Pentium dual core E5500
GPU: Integrated Intel g41 express
Motherboard: Acer m275 (the Acer veriton mini atx)
I've tried some kernel commands like nomodeset but nothing.
I have this problem with all Android iso, the same error.
Thanks in advance.
(Sorry for my bad English, I'm Italian)
Click to expand...
Click to collapse
assal said:
same problem here...
Click to expand...
Click to collapse
Just made an Installation video here on how to do it, downloaded the x64 iso version and burned it to a 16gb USB stick, partition scheme needs to be MBR for UEFI and legacy bios and format as FAT32, etc etc, you will also need parted magic on a seperate USB stick or bootable CD.
Installation for single OS video is here: https://youtu.be/c68qgPepjFI
If you want a dual boot, Windows and Phoenix, then boot into windows and use the downloader, the iso is for single OS only or Live CD/USB.
So.. I just installed Phoenix OS on my laptop, using the latest exe file. Once finished, I went on to restart the PC, then, there is a screen / terminal that I can choose between 2 OS, which is my Windows 10 , and Phoenix OS. Picking Windows 10 would boot Windows 10, but when I pick Phoenix OS, it just goes black, then after 5 seconds it just restarts and goes back to the terminal. Reinstalling won't help. Turning off secure boot and fast boot also doesnt work. Please help.
.
If you are wondering if there are any white text or logs that show when I pick an OS on tge terminal, there is, but only when I pick Windows 10, picking phoenix, as I already said, doesn't show anything, just blackness, though I know the laptop is turned on because I can see the brightness, and after 5 seconds, it turns off and turns back on again (restarts)
My laptop specs are.. AMD A9-9420 , RADEON R5 M420, 4GB RAM.
Asus X555BP
have you tried this or this ?
I haven't tried any of those solution, I will try them out. But I am unsure on how to do the solution where you replace the grub file from ubuntu(?) because I do not have ubuntu and also, i do not have any knowledge about that OS. . Recently, I tried installing Phoenix OS via ISO using a bootable flash drice, and it gives me the same result. When I choose install on harddrive, it just restarts on the terminal, when i try boot directly from usb, it also restarts. Maybe theres some incompatability issues on my hardware?
EDIT: So sorry for not reading the whole thing, the grub files were on the attachements. I feel so dumb
Tried the two solutions, none worked. I will read from that thread and see if i can find any other solutions
Atsukiri said:
My laptop specs are.. AMD A9-9420 , RADEON R5 M420, 4GB RAM.
Asus X555BP
Click to expand...
Click to collapse
Sorry to say but Phoenix-OS has problems with APU or Radeon graphics ,I was banned when I raise this question on their forum ,try android-x86 ,it should work or bliss-x86
Actually the exact problem happen to My Dual Core PC too.. using NVIDIA GT 210
The answer is simple: Your processor is not supported.
hi guys, I want use Phoenix OS in my laptop with windows 7. but laptop don't asking to me in preloading screen. I was used before time windows 7 and Phoenix OS in this laptop. why I can't install now?
Phoenix os unable to boot
My CPU IS CORE 2 QUAD q6600 2.4GHZ
Phoenix not booting and going back to terminal again and again after detecting phoenix os.....found at /dev/sda3
Doesn't work on my Pentium Dual Core e5500 2.8 GHz
The Lollipop version of Phoenix OS works fine but the Nougat one won't run..
Same problem here.. Did you find any solution of this problem... If you find any solution please help me..
My laptop lenovo AMD E2.
WoltreX said:
The answer is simple: Your processor is not supported.
Click to expand...
Click to collapse
Thanks. Everyone tried to make their (old) rig work on Phoenix, I found installing 1.5 worked for me, too bad it is very outdated with the Play service unable to update (Error 910). Do you have any clues what could go wrong?
Thinkpad x100e, AMD NV-40, 4G RAM
I have installed Phoenix Os on a variety of laptop and pc processors, succes install Phoenix Os on Acer A6 and Lenovo A8 with Phoenix ROC : D, sucess installs my PC core 2 duo E7500 with Phoenix Os v1.5 because it only supports sse4.1, and my laptop Lenovo a9 succes install Phoenix OS with a little problem in UEFI bios settings, try to set UEFI to allow access to Boot for Phoenix OS, so if anyone thinks Phoenix OS can't be installed on the AMD processor it is wrong >: |
Same problem
I'm going through same problem.. have you find any solution??? I'm on AMD too
Edit: Problem's with nougat version.. Running Lollipop version successfully
WoltreX said:
The answer is simple: Your processor is not supported.
Click to expand...
Click to collapse
nope i worked phoenix on dual core processor
I stumbled on this chinese fakebox in an indian lowcost shop.
Specs written on the box :
"Android 12" (fake, it's a 10. Should be a reworked Pixel2 firmware)
"64G ROM" ("G" WHAT? , it's a 16GB Samsung eMMC5.0)"
"4G RAM" (again, G what? it's 2GB of Samsung DDR3L
"5G WIFI" (fake, again. it's 2.4Ghz)
"ULTRA 8K High Dynamic" (fake, H313 does up to 4k)
anyway ...
External ports/connectors, left to right : 5V Power plug , Spdif, hdmi, eth, AV minijack (with button inside) / 2xUSB2.0, ; microsd.
PCB side A
- "X88PROA-H313-D4-V1.0 2020-11-20"
- cpu : H313 (? not verified, but it's that) covered by small heatsink
- eMMc 5.0 16GB Samsung klmag2gend-b031
- 4 samsung modules SEC XXX hyh9 k4b2g0446c DDR3-1333(667mhz) SDRAM sodimm (1GB on this side)
- AXP305 chip : PMIC
- Wifi on SDIO : chip iComm-semi "SV6256P" (2.4/5ghz) 150 mbps max a/b/g/n, aka SSV6256P by "South Silicon Valley" (MAC 2c:dd:5f...)
- VFD Display ("0/1" ,"LAN" , 88:88, WIFI strong, WIFI weak)
- One red led (indicating system shutdown)
PCB sideB :
- 4 samsung modules (another 1GB, so 2gb total)
- AIP1628 (VFD controller)
ROM :
rooted Android 10 + some apps; Play store present;
Can boot into recovery by installing some reboot app
Recovery menu :
"Android Recovery
google/walleye/walleye
11/RP1A.201105.002/5908170
user/release-keys
Use Volume up/down and power [just use an usb keyboard / air mouse]
Reboot system now
Reboot to bootloader
Enter fastboot
Apply update from ADB
Apply update from SD card
Wipe data ...
Wipe cache ...
Mount /system
View recovery logs
Run graphics test
Enter rescue
Power OFF"
Performance:
this box runs warm even just displaying Android home screen: heatsink is poorly placed, and stock rom has some frequency scaling problem (seems to be stuck at 1.2ghz)
Alternative ROMS/Linux distros : still looking around
update:
MiniArch (arch linux , kernel 6.3.x, Endeavour OS compatible): everything works but wifi.
(Wifi card will not work with kernels >4.4.x)