Related
Hello all,
The Yoga 10 and S6000-F seem to share the exact same specs (aside from the batteries), so the question is whether one could safely flash the 4.4 rom onto the S6000 to partake in the Kitkat goodness?
I don't believe this question has been asked before, but if it was, my apologies in advance. Thank you.
I also considering about installing Yoga Tablet 10 Firmware to S6000-H but flashing this version would be corrupt maybe device
I've a spare s6000 I'm willing to try it on if someone could point me to KK download and a guide to install it. I'm used to CWM/TWRP so not a complete n00b but have only rooted my s6000.
Anyone? Willing to accept CWM backup of your tablet if you've just wiped it before doing a backup.
Many thanks
Adrian
Finally managed to download the Yoga firmware from the Russian site. Tried to install just the boot.img and recovery.img - borked the tablet. Fortunately I know how to use fastboot and managed to recovery it with a backup I made earlier.
So, it might be possible mucking about with scatter files etc but just a plain old install won't work. You have been warned.
Many thanks
Adrian
Thank you very much for your try. Too bad just the install of Yoga firmware didn't work, maybe that would have been a to easy solution for us S6000 user. :laugh:
So there's no much hope left for an upgrade or custom firmware left I think.
Android L should be out soon so I've started looking at that. Ideally MTK will release the proper drivers etc. - here's hoping...
Many thanks
Adrian
Hello board... first time poster but LONG TIME user. This board has helped me for years with my last 4-5 smartphones and several tablets... The least I can do is pay back. I went to the other "round" site with my issue, due to the fact that I could find an answer here. To be honest..... I wasn't real pleased with the moderator's tone and responses to me... when I was simply trying to help others. So here I am after erasing all this info at the other site...ha!
So I was playing around with my Zeblaze Thor Pro 3g and trying to flash different firmware. I actually bricked my watch flashing it as a Thor S and had to wait 4 days for the battery to run out to re-flash it again. I searched and searched and searched for the stock rom... to no avail. I reached out to Zeblaze directly and after a few days got results.... YES!!!
Ok now so I've had success installing the original Thor Pro 3G rom.... yes!
It is easy to do using SP Flash Tool and following the PowerPoint Instructions.
Dropbox folder with all Zeblaze Pro 3G files:
www.dropbox.com/sh/iz6lcrgewwcorhp/AABGV6ii6PM66KmspateRXgva?dl=0
Here you will find:
* PowerPoint with Instruction on flashing
* Drivers for Windows
* SP Flash Tool Version v5.1652
* Stock Zeblaze Pro 3G ZIP file (with scatter file)
I have flashed it now, it is working great and this is what my watch says:
Model Number: Thor Pro
Android Version: 5.1
Kernel Version: 3.10.72 Sat May 12 12:55:06
Build Number: XY_C5_X300_KY16_V1.4_20180512
On another note: I have turned off auto wrist wake up, wifi and the Play Store auto update. I am using Wiiwatch and BT calling. I am now getting great battery life. It has been over 30 hours and I am still at 69%. I haven't spent much time on it though... mainly checking time and messages.
BEST OF LUCK EVERYONE!
#2
See below
#3
See below
Dropbox folder with all Zeblaze Pro 3G files:
www.dropbox.com/sh/iz6lcrgewwcorhp/AABGV6ii6PM66KmspateRXgva?dl=0
Here you will find:
* PowerPoint with Instruction on flashing
* Drivers for Windows
* SP Flash Tool Version v5.1652
* Stock Zeblaze Pro 3G ZIP file (with scatter file)
I have flashed it and this is what my watch says:
Model Number: Thor Pro
Android Version: 5.1
Kernel Version: 3.10.72 Sat May 12 12:55:06
Build Number: XY_C5_X300_KY16_V1.4_20180512
BEST OF LUCK EVERYONE!
sidjones1 said:
See below
Click to expand...
Click to collapse
PM the link and i will post here for you.
Thanks Beackman... it think I may have let me after 24hours. Here is the link:
www.dropbox.com/sh/iz6lcrgewwcorhp/AABGV6ii6PM66KmspateRXgva?dl=0
sidjones1 said:
Thanks Beackman... it think I may have let me after 24hours. Here is the link:
www.dropbox.com/sh/iz6lcrgewwcorhp/AABGV6ii6PM66KmspateRXgva?dl=0
Click to expand...
Click to collapse
Great man.... and thx for helping people here.
Do you guys manage to sync gmail with this watch independently? it always forced closed using sync function on the current firmware
Is This for THOR S ?? Does´n work on my Thor Pro..
jebbs said:
Is This for THOR S ?? Does´n work on my Thor Pro..
Click to expand...
Click to collapse
Jebbs, This is for the Zeblaze Thor Pro....... not the S version.
What did not work? Did you follow the instructions in the Powerpoint exactly?
Did you make sure your watch was turned off prior to plugging it in to your PC?
It worked fine on mine...
sidjones1 said:
Jebbs, This is for the Zeblaze Thor Pro....... not the S version.
What did not work? Did you follow the instructions in the Powerpoint exactly?
Did you make sure your watch was turned off prior to plugging it in to your PC?
It worked fine on mine...
Click to expand...
Click to collapse
Hello..
Yep, doesn't work. The display still in a real black darkness. I think that, the problem is on the "video" configuration, because the smartwatch started, but withou any image in the display. Thats the problem..
Hmmm... that is weird. I had bricked mine with a black screen too. I was trying to flash a Thor S on my Thor Pro.... didn't work. It acted just like yours. I could connect it to my PC and it would show up, just had a black screen. I figured it must be because the Thor s wasn't compatible with my Thor Pro. I had to wait 4 days for the battery to run completely down to re-flash with the one I provided above. Like I said, it worked fine for me but I had to wait 4 days until the battery completely ran down. I would check it each day by holding down both buttons and feeling a vibration. If I felt the vibration, I knew it still had battery life in it and was still "on". I even tried to remove the back to disable the battery to no avail. Just wait a few days and try it again after the battery goes dead.
In my Dropbox there are the windows drivers, the SP flash tool (version v5.1652), the instruction PowerPoint and the ZIP file. I just realized that when I did mine, used the SP flash tool version v5.1744. I wonder if that would make a difference for you. I uploaded a newer version of the SP Flash Tool V5.1744 to the same link above. Just in case you want to try that one too. Hope this helps
you dont need to wait for battery just opened the watch,its easy just carefull,you maybe install something wrong,i did have too black with a grey in the middle, your PC recognize the watch,if it is ok you are good to go, get the stock firmware V1.4, its weird,it says the thor S,but is the one,use SP flash tool,format and download everything again and see what happen. good luck,you can even use the TWRP recovery,expanse for the OpenWatch project for the thor pro,go and read it.
Hey their... In my watch,the language turns chinese in the default keyboard after sometime...initially its english but I think the default keyboard shows stuff in english but the suggestion panel is in chinese...besides this on gboard, the enter button is hidden in the watch curve so can't be pressed...which other keyboard could be used???help!!!
Here is the photo of the same...
Here is the pic for help..
[email protected] said:
Hey their... In my watch,the language turns chinese in the default keyboard after sometime...initially its english but I think the default keyboard shows stuff in english but the suggestion panel is in chinese...besides this on gboard, the enter button is hidden in the watch curve so can't be pressed...which other keyboard could be used???help!!!
Click to expand...
Click to collapse
Hold in your top button for a few secs.... you will get a screen that says power off-reboot-power save-recent task. look above that line and you will see your watch (probably says full- screen). Tap that and it will change to a squared screen. Then you can access the full screen in squared mode. Just hit the button on the keyboard for non Chinese (CN/EN). Good luck!
Thanks maaaan....that helped alot...btw..how to use gboard???
Where to find latest FW for this watch?
Also, is it good for running?
Hello, everyone! I'm about to buy the zeblaze thor 4 pro. I'm reading in a site that BT calling is not supported in android 7.0 smartwatces. So my question is, is it true? Have anybody here this model and is using BT calling? (My phone have android 6.0)
I can't for the life of me find a patched boot.img for OxygenOS 10.5.10. The latest one I can find is for 10.5.6. I've seen some posts saying you can find the one for 10.5.10 by searching the forum, but trust me, I've searched the forum for almost an hour now with no luck.
Could someone please help me out? I would like to root my Oneplus 8 Pro (US variant) which is currently running OxygenOS 10.5.10 without having to install TWRP. Its my understanding that this requires a patched boot.img which is version specific.
I'd really appreciate it!! Thanks!
Johnjr08 said:
I can't for the life of me find a patched boot.img for OxygenOS 10.5.10. The latest one I can find is for 10.5.6. I've seen some posts saying you can find the one for 10.5.10 by searching the forum, but trust me, I've searched the forum for almost an hour now with no luck.
Could someone please help me out? I would like to root my Oneplus 8 Pro (US variant) which is currently running OxygenOS 10.5.10 without having to install TWRP. Its my understanding that this requires a patched boot.img which is version specific.
I'd really appreciate it!! Thanks!
Click to expand...
Click to collapse
If you dont wanna patch it yourself you can just boot twrp (not install it) and flash magisk from there..
Johnjr08 said:
I can't for the life of me find a patched boot.img for OxygenOS 10.5.10. The latest one I can find is for 10.5.6. I've seen some posts saying you can find the one for 10.5.10 by searching the forum, but trust me, I've searched the forum for almost an hour now with no luck.
Could someone please help me out? I would like to root my Oneplus 8 Pro (US variant) which is currently running OxygenOS 10.5.10 without having to install TWRP. Its my understanding that this requires a patched boot.img which is version specific.
I'd really appreciate it!! Thanks!
Click to expand...
Click to collapse
Patch it yourself ..
Here's my patched image but it's recommended to patch your own for maximum compatibility!
If you don't know how to boot TWRP and flash Magisk there's an all-in-one tool that will do it for you here, https://forum.xda-developers.com/on...ol-tool-one-driversunlocktwrpfactory-t4103509. You'll be rooted in a matter of minutes.
Hey guys I made a video of this on YouTube. Google anisauce and there should be a video about it
Aksaa13 said:
Hey guys I made a video of this on YouTube. Google anisauce and there should be a video about it
Click to expand...
Click to collapse
Or you could just read.........there is a million topics
Hello.
You can use paylod dumber to exclude the boot.img
From the OTA OXYGEN 10.5.10.
And then flash it onmagisk to get magisk_patched
It's very easy
hi, sadly the payload unzip doesn't work on my computer. I am urgently looking for the boot.img for 10.5.10.IN21BA. Can anyone help me? i can't find it on the net.
pooganes said:
hi, sadly the payload unzip doesn't work on my computer. I am urgently looking for the boot.img for 10.5.10.IN21BA. Can anyone help me? i can't find it on the net.
Click to expand...
Click to collapse
I don't normally want to give out personal information. But if you really need it, I might be able to do it on my computer and send it to you.
Aksaa13 said:
I don't normally want to give out personal information. But if you really need it, I might be able to do it on my computer and send it to you.
Click to expand...
Click to collapse
I already got IT! Thanks you verry much.
I'm looking for this image so I can use Magisk. Going to keep it simple. Thanks in advance.
Do you mean 100003561?
Hi guys i was wondering if anyone has messed around with eonons new headunits the R03 (RK3566)
i just bought it and really coming to the conclusion it needs a better audio eq the original dsp really does not cut it for a 2000w skar audio setup/ any audio setup really.
i have emailed eonon support asking for a update to fix there wifi issues when i first got the headunit 3 months ago.. here is there factory version of there rom hoping someone can help me add viper4 android and root. and mainly recording some info on this machine due to absolutely no dev support because it is so new. hoping to start that trail of support.
all and all radio works ok now (FAST ) wireless android auto somewhat ok DSP but the audio settings are seriously limited i paid just over 500$ cad for this headunit hoping it would bring some good quality (audio wise but sadly disappointed) never the less v4a im sure can really bring the hype back.
here is cpu Z photos of this unit apparently a rk30 but factory software claims as rk3566
Willing to gladly try any modified versions of the file update.zip listed below. I'm completely aware of the dangers of potentially bricking my headunit.
(update) upload file service didnt want to upload the .zip file here it is via mediafire.
update
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
If the update file contains a boot.img we could patch it using magisk canary!
(i bricked my device by using the regular magisk version which doesnt support a-only)
viper4 and rooted
viper4 and rooted
Hey guys,
I also have an Eonon unit with the RK3566. Definitely interested in getting root access, I have magisk and adb, but I’m not able to enable usb debugging via traditional means. Anyone know how to get around the hidden developer options menu on these units?
Thanks
localos said:
viper4 and rooted
Click to expand...
Click to collapse
Thanks man! testing and will post results. thank you for your attempt!!
**Confirmed working on update supplied by @localos **
Superuser is working flawlessly.
Tested this by installing latest version of busybox
Head unit is working as it should wifi /BT 0 issues.
However v4A is crashing appon launch.
Any suggestions? I have not tried editing build.prop to permissive..
I'm a bit worried installing a later Verson of v4a but open to all suggestions.
It seems it's only taking audio ajustments via factory amplifier app.
Another question. Now that we have proper root access what is the best possible way to perform a full backup of the system as it sits?
I feel this would be great for someone with the same radio needing a working Backup..
TWRP? I don't know where to begin.. there is no custom recoverys..
Not Android Automotive OS, requested moderator move to [Android Head-Units] forum.
I have a similar android 11 head unit from pumpkin. using the RK3566 Chip, I have an original copy of the Update file for the head unit but cannot seem to patch the boot.img If someone can show me how to extract the boot.img patch it, and put it back in the update that would be great.
Or i can provide the update file and if someone could patch it for me like @localos did that would be amazing.
1.03 GB folder on MEGA
mega.nz
CrazyRandomzZ said:
I have a similar android 11 head unit from pumpkin. using the RK3566 Chip, I have an original copy of the Update file for the head unit but cannot seem to patch the boot.img If someone can show me how to extract the boot.img patch it, and put it back in the update that would be great.
Or i can provide the update file and if someone could patch it for me like @localos did that would be amazing.
1.03 GB folder on MEGA
mega.nz
Click to expand...
Click to collapse
Well i have patched the boot.img using magisk canary, But thats as far as I can get, I cant seem to repackage the update file without throwing an error about signatures, ive tried signing the update.zip with 0 success.
Im so close but yet so far!
Any help much appreciated
@CrazyRandomzZ This firmware is rooted
@CrazyRandomzZ This firmware is rooted
Яндекс
Найдётся всё
disk.yandex.ru
localos said:
@CrazyRandomzZ This firmware is rooted
Яндекс
Найдётся всё
disk.yandex.ru
Click to expand...
Click to collapse
This Worked perfectly. Thank you. this installed superuser.
should i now do a direct install via Magisk or would this give me a boot looping issue. im not sure. thanks
localos said:
@CrazyRandomzZ This firmware is rooted
Яндекс
Найдётся всё
disk.yandex.ru
Click to expand...
Click to collapse
Can you possibly upload the update again? I also fail to sign the rooted update. I would be very grateful to you.
@localos @CrazyRandomzZ @Jaremyhawk
Can anyone share a working link for the working firmware???
Oooh oooh, me too....
Need it to try to get my obdlink mx+ to work with the head unit...