Hello all,
The Yoga 10 and S6000-F seem to share the exact same specs (aside from the batteries), so the question is whether one could safely flash the 4.4 rom onto the S6000 to partake in the Kitkat goodness?
I don't believe this question has been asked before, but if it was, my apologies in advance. Thank you.
I also considering about installing Yoga Tablet 10 Firmware to S6000-H but flashing this version would be corrupt maybe device
I've a spare s6000 I'm willing to try it on if someone could point me to KK download and a guide to install it. I'm used to CWM/TWRP so not a complete n00b but have only rooted my s6000.
Anyone? Willing to accept CWM backup of your tablet if you've just wiped it before doing a backup.
Many thanks
Adrian
Finally managed to download the Yoga firmware from the Russian site. Tried to install just the boot.img and recovery.img - borked the tablet. Fortunately I know how to use fastboot and managed to recovery it with a backup I made earlier.
So, it might be possible mucking about with scatter files etc but just a plain old install won't work. You have been warned.
Many thanks
Adrian
Thank you very much for your try. Too bad just the install of Yoga firmware didn't work, maybe that would have been a to easy solution for us S6000 user. :laugh:
So there's no much hope left for an upgrade or custom firmware left I think.
Android L should be out soon so I've started looking at that. Ideally MTK will release the proper drivers etc. - here's hoping...
Many thanks
Adrian
Related
Hi!
Can someone guide me little with rootting and installing new android on IdeaPad A1000L-F?
I've found a lot of guides, but none of those are for this wlan model only, I think? I would be so happy, if someone could tell me how and what can I do with this. Current android (4.1) is so outdated, that I cant stand this. And latest games don't even install on this version.
Thanks!
Edit: Got my tab rooted with one click root, but what now?
any help yet? i have same tablet and same question:silly:
Nothing yet, sorry. We'll see, maybe someone gives us a little advice soon. Hope so!
First, you'd have to port a recovery (cwm or twrp) to your device and fastboot flash it.
You'll have to use a repo for aosp, cm, miui, or other and make a rom.
The a1000l source code is available here: http://mobilesupport.lenovo.com/us/en/products/a1000_tablet?tabname=downloads
You will need that in your venture.
Unfortunately, this is just not a popular tablet. I bought one for my daughter and rooted it, but that's about as far as I will go with it.
Good luck!
It looks like recovery is already available for T, F, models. I'm not certain if this will translate over to G, L models or not:
CLICK HERE FOR REDIRECT
This is from page 3 of that translated russian thread:
Administrator
1004 posts
481
Honored forumchanin
Extras. Information [+]
Posted November 29, 2013 - 10:03
pitshocker написал (28 Nov 2013 - 11:12):
I think this recovery is not compatible for A1000L-F 8Gb model?
Version of the A1000-F can earn. Use at your own risk, no one has tested it.
Click to expand...
Click to collapse
The only "custom" ROM I have found is just a modified version of stock. This means no version upgrade:
CLICK HERE FOR REDIRECT
I am unable to get flashtool working from those threads and fastboot is not detecting the device in Windows or Linux. I was hoping to "fastboot boot recovery.img" in order to do some testing, but no luck right now. I'll mess around some other time...
I've got working CWM on my A1000L-F thanks to the links in this thread:
http://forum.xda-developers.com/showpost.php?p=50187460&postcount=2
Lenovo has only released broken source so compiling 4.2+ will be too much of a hassle for an $80 tab that my daughter uses...
Q&A for [ROM][A500 & A501] Android 4.4.4 (OmniROM unofficial)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][A500 & A501] Android 4.4.4 (OmniROM unofficial). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Android 4.4.4 on Acer A500 Working Partially
I was running ICS 4.03 and installed the 4.4.4 from this thread:
http://forum.xda-developers.com/showthread.php?t=2705989
Using Skrilax V9 bootloader and CWM 6.0.4.5.
Omnirom Kitkat loads up fine but cannot restore apps through Titanium Backup and as it reports no Root access.
Also Google Play cannot locate this device but I can log in and see my apps using the stock Browser that was installed.
Made several attempts with Google Android Manager to no avail.
I assume this custom ROM has root access correct? If true, don't understand why Titanium Backup is complaining.
Location is set for Wi-Fi and mobile network to determine location.
So for now cannot restore my apps locally via Titanium Backup until I get to the bottom of the issue.
Your guidance appreciated as well as the work to make this ROM available to such a broad audience.
DISREGARD, I am getting everything working in the light version.
Rom for Acer A500
Hello I am new to the forum and also the modding and not perlo language very well.
I tried to flash the recovery "update-recovery-thor2002ro-rev1.7.3" the "OmniROM-4.4.4-Tegraowners ROM v21" the work went well but sometimes I crash.
Can you tell me what is currently the OmniROM 4.4.4 better and more stable than those in the first page, and if I can flash with the current recovery, (update-recovery-thor2002ro-rev1.7.3), pointing to the steps to do because I lost in the discussion not knowing the language in fact I am using the translator.
thanks
Hello!
I can flash the OmniROM KitKat front page having the recovery "update-recovery-thor2002ro-rev1.7.3"?
thanks
ugor84 said:
Hello I am new to the forum and also the modding and not perlo language very well.
I tried to flash the recovery "update-recovery-thor2002ro-rev1.7.3" the "OmniROM-4.4.4-Tegraowners ROM v21" the work went well but sometimes I crash.
Can you tell me what is currently the OmniROM 4.4.4 better and more stable than those in the first page, and if I can flash with the current recovery, (update-recovery-thor2002ro-rev1.7.3), pointing to the steps to do because I lost in the discussion not knowing the language in fact I am using the translator.
thanks
Click to expand...
Click to collapse
I used the instructions found at the beginning of the 4.4.4 Light version thread as the full version gave me issues. I didn't use the Thor recovery, Skrilax version 9 instead.
http://forum.xda-developers.com/showthread.php?t=2792022
GPS not working
I am using A500 and I have instaled Android 4.4.4 ROM based on Omnirom KitKat (build 6).
The instalation was successfully completed, I think so because there was no errors. This is my first time so I havent any expirience.
See attachment pictures...there is no GPS. Any sugestion, why?
Thanky you.
EDIT: I add one more picture to see how it was before.
gapps for omni ROM 4.4.4
I just got these gapps to work on my a500
http://forum.xda-developers.com/showthread.php?t=2397942
I had to wipe the system and reflashed the ROM and gapps
I'm using the pico version. Hope that helps
Sent from my Acer iconia A500
Great rom
jenko1447 said:
I just got these gapps to work on my a500
http://forum.xda-developers.com/showthread.php?t=2397942
I had to wipe the system and reflashed the ROM and gapps
I'm using the pico version. Hope that helps
Sent from my Acer iconia A500
Click to expand...
Click to collapse
Wasnt sure where to say thanks. So I decided to put it here. Thanks for all the hard work the rom is awesome!!
Can I install build 8 overtop of build 6?
Can I install build 8 overtop of build 6? What I mean by that is can I install build 8 without wipeing data in CWM because I already have build 6 installed and I have the same ROM so can I?
Loss of Root
Has anyone else lost root with build 8?
flickering screen with Facebook?????
I installed v6 of omni ROM on my Acer a500, and just updated to the newest version. Both ROMs are am some and smooth, but I have just one issue when I have Facebook open for a few minutes, I go to scroll down then the screen starts to flicker and I can't do anything. And to use it again I have to reboot otherwise I just get a black screen. It happens on both versions of the ROM, anyone else have this issue???. Thanks for any replies
Hello , I am trying to flash this rom on my Acer a500 and I get this error :
This package is for "picasso.a500" device this is a "ventana".
E:error
Status (7)
Could anyone help me with this issue?
Lockups
yeah i have been having a few issues along the same lines, i think its more to do with disk 'bandwidth' usage than the cpu. With low data throughput apps running it will run for days without issue, start downloading at 500kB/s (or sometimes as little as 370kB/s) and do some other disk intensive task and pop its gone! this could be biased a bit by my experience of it as i quite often use the A500 to dl things or load it up with stuff before a journey etc.. have also had it get stuck in deep sleep modes but think thats the disk issue as well...
Could it be overfilling it disk buffers or something? not much experience with android hardware but this tablets a bit old now and new roms may be expecting the inbuilt storage to be performing a little faster than the a500's can deal with
Also have tried all the available i/o schedulers and none seem to have and noticeable difference in time between hangs, although without bothering to setup proper test conditions i cant really say much really
oops was meant to be in reply to http://forum.xda-developers.com/showpost.php?p=60787006&postcount=293 meh....
LNX partition not loading?
Hello and sorry if it's an easy question but it's my first time trying to install roms. I've followed http://forum.xda-developers.com/showthread.php?t=2705989 to install OmniRom 4.4.4 on my iconia A500. I installed Skrilax bootloader V9 and then CWM 6.0.4.5 on my device and up to now everything worked well. I then put OmniRom 4.4.4 build 8 and gapp pico on a micro sd card, wiped data using CWM then install the rom (from /storage/sdcard1) then installed the gapp (also from /storage/sdcard1), then wiped cache partition and rebooted. I've been stuck on the Skrylax "booting android image from LNX partition" for half an hour now... Where did I make a mistake?
Stuck on startup logo
hi
please help me
i installed kitkat ROM and mini gapss
and after restarting the tab stucked in startup logo
what is the cause & what shall i do to overcome that
and thx
Step by step guide
Hi guys. i'm a noob at this. i had earlier successfully rooted by Samsung Galaxy S Plus with CyanogenMod, but am at my wits end with rooting my A500. The process seems very complicated, with each page leading to another and resulting in multiple downloads. could someone please give a step by step guide with all downloads listed in sequence. screenshots would be great help. thanks in advance.
Using TWRP-2.6.3.0 to install Omni 4.4.4
Hi all,
Just want to know if it does matter to use TWRP-2.6.3.0 (instead of 2.6.3.1) to install Omni 4.4.4...???
Anyway, the installation went through w/out any issue. I'm using my revived Acer-A500 (was bricked for almost 2 yrs).
W/out this XDA-Dev's great resource, I would not be able to revive my bricked Acer-A500 & running Omni 4.4.4 (CM-11) now.
Many thanks to everyone on the board, especially, Skrilax, blackthund3r, civato & all the great XDA-Dev team...!!!
Cheers,
JKS
(Since I'm a newbie, I can't post in development forums, so I guess this goes here for now. If this is the wrong place, I apologise.)
I have an Asus Zenpad 8.0 (Z380M/P00A), which doesn't seem to have any support from the custom rom community. This is not surprising as it's a fairly uncommon device, and until recently, Asus has been less than helpful. However, the latest firmware update (supposedly; I haven't pulled the trigger yet) allows the Asus bootloader unlock utility to work on this tablet.
I've wanted to replace Asus's firmware since I bought the thing. I know that it's an uncommon device, so I'll have to do all the work myself. I'm an experienced Linux hacker, so I know how to configure and build kernels, how Linux OS images are constructed, how to read/write C, etc. However, I'm a bit of an Android newbie.
I figured the first step would be to port TeamWin recovery, so I'd have a way out if I brick the thing. But (from what I've been able to find) porting TeamWin requires a working CM or (preferably) Omni port. So it's kinda a chicken and egg problem. Do people just port roms using stock recovery and hope for the best? Or is there a (more involved, I'm sure) way of porting TeamWin that doesn't require an existing port? Or is there some other recovery (I don't know about) that's more standalone?
And then there's the issue of porting the OS itself. For thier part, Asus provides kernel souces, firmware images, and the aforementioned boot loader unlock utility. I imagine to get started, one has to compile a kernel and combine it with binary blobs extracted from the firmware image, but I'm not entirely sure.
I've looked around for porting information, but the guides I found all seem to assume you've got a working device tree from one mod that you want to graft onto another. I couldn't find much about really starting from (nearly) nothing. I'd like to say I'm surprised Google doesn't have something written up, but given how unhelpful I've found a lot of thier Android docs in the past, I'm not.
I'm mostly interested in porting AOSP to start, but I'd be willing to start somewhere else if some other ROM is easier to work with. Anyway, thanks in advance for any suggestions or advice you might have to offer.
Any progress on this? I was able to flash twrp and root my Asus Zenpad 8.0 (Z380M/P00A), but had no luck finding a compatible rom. Did you get to compile one? Thanks!
How would you unlock the bootloader for this device?
Hi, my wife give the other day an old lenovo b8000-f she had at her work. I't new with little use with use, but of course i can't be perfect i shas android 4.4.2, very old. I don't want to use it as a brand new modern tablet, but with android 4.4.2 i can use it for almost anything. Is there a rom to upgrade it, i already search and i can't find anything. I fanybody know some roms plese tell me.
Thank
Aloha, I looking for any ROM to update my Lenovo B8080-F as well, however, at the moment I couldn't find anything relative to this even on Google. I just found this to Install a Recovery TWRP https://forum.xda-developers.com/android/development/recovery-twrp-2-8-7-0-touch-recovery-t3282520
We appreciate if someone read this and got any idea where can we find a ROM to update our old tables.
Cheers!
Does anybody have a link to a custom ROM for a Lenovo B8000? Seen the instructions to install TWRP but don't see much point in doing that unless there's a ROM available.
Robbo369 said:
Does anybody have a link to a custom ROM for a Lenovo B8000? Seen the instructions to install TWRP but don't see much point in doing that unless there's a ROM available.
Click to expand...
Click to collapse
I'm looking too. It seems such a shame to let an old decent tablet like this go to waste...
Hi, I recently bought an used OnePlus 8 Pro and it was already updated to Android 11. After repairing it, I discovered that it's not possible to run TWRP on this firmware version.
Couldn't I just go ahead and downgrade the OS in order to run TWRP on it or is it basically impossible like on the latest Samsung Galaxy S-series devices?
Would be glad if someone could answer me that question. I kinda tried to boot into twrp because I was too quick to read the thread but it just caused my device to run into Qualcomm Emegency Mode.
What do you need twrp for? If it's just to root and almost everything else... It can be done via other means.
sensui123 said:
What do you need twrp for? If it's just to root and almost everything else... It can be done via other means.
Click to expand...
Click to collapse
I also counter the same problem, i just want to use twrp to flash another rom. Do you have any solution? I have search the forum but i didnot find something useful.
freeman1007 said:
I also counter the same problem, i just want to use twrp to flash another rom. Do you have any solution? I have search the forum but i didnot find something useful.
Click to expand...
Click to collapse
Hmmmm the way I've seen a lot of custom roms... They're installed/flashed partition by partition in bootloader via fastboot.....I guess if you have to use twrp to flash the entire rom you do need to downgrade to os 10.
sensui123 said:
Hmmmm the way I've seen a lot of custom roms... They're installed/flashed partition by partition in bootloader via fastboot.....I guess if you have to use twrp to flash the entire rom you do need to downgrade to os 10.
Click to expand...
Click to collapse
Thank you for your response. i think i just did not catch up the latest progress. Would you please help me find the instruction about how to flash rom in the new way you mentioned ? thank you so much.
And i still have the same question , is it necessary for us to downgrade to android 10 and then start flashing rom.
Look at the roms in the subforum here:
OnePlus 8 Pro ROMs, Kernels, Recoveries, & Other
Improve your OnePlus 8 Pro 's battery life, performance, and look by rooting it and installing a custom ROM, kernel, and more.
forum.xda-developers.com
I just looked at some popular ones like Pixel experience and Lineage and they're both flashed in this way. Look at the opening post where the instructions are... Seems like Pixel Experience there's a batch file that flashes the partitions but it's essentially done this way without twrp.
sensui123 said:
Look at the roms in the subforum here:
OnePlus 8 Pro ROMs, Kernels, Recoveries, & Other
Improve your OnePlus 8 Pro 's battery life, performance, and look by rooting it and installing a custom ROM, kernel, and more.
forum.xda-developers.com
I just looked at some popular ones like Pixel experience and Lineage and they're both flashed in this way. Look at the opening post where the instructions are... Seems like Pixel Experience there's a batch file that flashes the partitions but it's essentially done this way without twrp.
Click to expand...
Click to collapse
thank you for your reply, I already tried to flash pixel experience, i followed the install guide but failed to flash its recovery file.
Install PixelExperience on instantnoodlep - PixelExperience Wiki
Install PixelExperience on instantnoodlep - PixelExperience Wiki
wiki.pixelexperience.org
Because it requires installing rom from recovery, so I get stuck here.
The problem is the device enters crash dump mode when switched to recovery mode. I guess the reason is that my p8pro is in andriod 11 before i flash recovery. now the device can enter android 11 normally but the recovery don't function. So I am here to ask is it necessary for me to downgrade to android 10 to solve the problem.
sensui123 said:
Look at the roms in the subforum here:
OnePlus 8 Pro ROMs, Kernels, Recoveries, & Other
Improve your OnePlus 8 Pro 's battery life, performance, and look by rooting it and installing a custom ROM, kernel, and more.
forum.xda-developers.com
I just looked at some popular ones like Pixel experience and Lineage and they're both flashed in this way. Look at the opening post where the instructions are... Seems like Pixel Experience there's a batch file that flashes the partitions but it's essentially done this way without twrp.
Click to expand...
Click to collapse
Thank you for your reply, it help me a lot. i have already flash my device lineage os . Regarding the problem i mentioned in my last reply, it seems the install guide is for android 10. As for android 11 , i think it needs a payload dumper to extract all files and flash them one by one.
MichalPlays said:
Hi, I recently bought an used OnePlus 8 Pro and it was already updated to Android 11. After repairing it, I discovered that it's not possible to run TWRP on this firmware version.
Couldn't I just go ahead and downgrade the OS in order to run TWRP on it or is it basically impossible like on the latest Samsung Galaxy S-series devices?
Would be glad if someone could answer me that question. I kinda tried to boot into twrp because I was too quick to read the thread but it just caused my device to run into Qualcomm Emegency Mode.
Click to expand...
Click to collapse
I think the answer depends why do you need twrp. If you just want to flash a rom like me, you can find a custom rom supporting android 11,for example lineage os and you can flash all files it requires without twrp.
If you want to flash a android 10 rom or you just want to flash twrp , i don't know how, maybe you should downgrade.