Zeblaze Thor Pro 3G Smartwatch - Original stock firmware - Other SmartWatches

Hello board... first time poster but LONG TIME user. This board has helped me for years with my last 4-5 smartphones and several tablets... The least I can do is pay back. I went to the other "round" site with my issue, due to the fact that I could find an answer here. To be honest..... I wasn't real pleased with the moderator's tone and responses to me... when I was simply trying to help others. So here I am after erasing all this info at the other site...ha!
So I was playing around with my Zeblaze Thor Pro 3g and trying to flash different firmware. I actually bricked my watch flashing it as a Thor S and had to wait 4 days for the battery to run out to re-flash it again. I searched and searched and searched for the stock rom... to no avail. I reached out to Zeblaze directly and after a few days got results.... YES!!!
Ok now so I've had success installing the original Thor Pro 3G rom.... yes!
It is easy to do using SP Flash Tool and following the PowerPoint Instructions.
Dropbox folder with all Zeblaze Pro 3G files:
www.dropbox.com/sh/iz6lcrgewwcorhp/AABGV6ii6PM66KmspateRXgva?dl=0
Here you will find:
* PowerPoint with Instruction on flashing
* Drivers for Windows
* SP Flash Tool Version v5.1652
* Stock Zeblaze Pro 3G ZIP file (with scatter file)
I have flashed it now, it is working great and this is what my watch says:
Model Number: Thor Pro
Android Version: 5.1
Kernel Version: 3.10.72 Sat May 12 12:55:06
Build Number: XY_C5_X300_KY16_V1.4_20180512
On another note: I have turned off auto wrist wake up, wifi and the Play Store auto update. I am using Wiiwatch and BT calling. I am now getting great battery life. It has been over 30 hours and I am still at 69%. I haven't spent much time on it though... mainly checking time and messages.
BEST OF LUCK EVERYONE!

#2
See below

#3
See below

Dropbox folder with all Zeblaze Pro 3G files:
www.dropbox.com/sh/iz6lcrgewwcorhp/AABGV6ii6PM66KmspateRXgva?dl=0
Here you will find:
* PowerPoint with Instruction on flashing
* Drivers for Windows
* SP Flash Tool Version v5.1652
* Stock Zeblaze Pro 3G ZIP file (with scatter file)
I have flashed it and this is what my watch says:
Model Number: Thor Pro
Android Version: 5.1
Kernel Version: 3.10.72 Sat May 12 12:55:06
Build Number: XY_C5_X300_KY16_V1.4_20180512
BEST OF LUCK EVERYONE!

sidjones1 said:
See below
Click to expand...
Click to collapse
PM the link and i will post here for you.

Thanks Beackman... it think I may have let me after 24hours. Here is the link:
www.dropbox.com/sh/iz6lcrgewwcorhp/AABGV6ii6PM66KmspateRXgva?dl=0

sidjones1 said:
Thanks Beackman... it think I may have let me after 24hours. Here is the link:
www.dropbox.com/sh/iz6lcrgewwcorhp/AABGV6ii6PM66KmspateRXgva?dl=0
Click to expand...
Click to collapse
Great man.... and thx for helping people here.

Do you guys manage to sync gmail with this watch independently? it always forced closed using sync function on the current firmware

Is This for THOR S ?? Does´n work on my Thor Pro..

jebbs said:
Is This for THOR S ?? Does´n work on my Thor Pro..
Click to expand...
Click to collapse
Jebbs, This is for the Zeblaze Thor Pro....... not the S version.
What did not work? Did you follow the instructions in the Powerpoint exactly?
Did you make sure your watch was turned off prior to plugging it in to your PC?
It worked fine on mine...

sidjones1 said:
Jebbs, This is for the Zeblaze Thor Pro....... not the S version.
What did not work? Did you follow the instructions in the Powerpoint exactly?
Did you make sure your watch was turned off prior to plugging it in to your PC?
It worked fine on mine...
Click to expand...
Click to collapse
Hello..
Yep, doesn't work. The display still in a real black darkness. I think that, the problem is on the "video" configuration, because the smartwatch started, but withou any image in the display. Thats the problem..

Hmmm... that is weird. I had bricked mine with a black screen too. I was trying to flash a Thor S on my Thor Pro.... didn't work. It acted just like yours. I could connect it to my PC and it would show up, just had a black screen. I figured it must be because the Thor s wasn't compatible with my Thor Pro. I had to wait 4 days for the battery to run completely down to re-flash with the one I provided above. Like I said, it worked fine for me but I had to wait 4 days until the battery completely ran down. I would check it each day by holding down both buttons and feeling a vibration. If I felt the vibration, I knew it still had battery life in it and was still "on". I even tried to remove the back to disable the battery to no avail. Just wait a few days and try it again after the battery goes dead.
In my Dropbox there are the windows drivers, the SP flash tool (version v5.1652), the instruction PowerPoint and the ZIP file. I just realized that when I did mine, used the SP flash tool version v5.1744. I wonder if that would make a difference for you. I uploaded a newer version of the SP Flash Tool V5.1744 to the same link above. Just in case you want to try that one too. Hope this helps

you dont need to wait for battery just opened the watch,its easy just carefull,you maybe install something wrong,i did have too black with a grey in the middle, your PC recognize the watch,if it is ok you are good to go, get the stock firmware V1.4, its weird,it says the thor S,but is the one,use SP flash tool,format and download everything again and see what happen. good luck,you can even use the TWRP recovery,expanse for the OpenWatch project for the thor pro,go and read it.

Hey their... In my watch,the language turns chinese in the default keyboard after sometime...initially its english but I think the default keyboard shows stuff in english but the suggestion panel is in chinese...besides this on gboard, the enter button is hidden in the watch curve so can't be pressed...which other keyboard could be used???help!!!

Here is the photo of the same...

Here is the pic for help..

[email protected] said:
Hey their... In my watch,the language turns chinese in the default keyboard after sometime...initially its english but I think the default keyboard shows stuff in english but the suggestion panel is in chinese...besides this on gboard, the enter button is hidden in the watch curve so can't be pressed...which other keyboard could be used???help!!!
Click to expand...
Click to collapse
Hold in your top button for a few secs.... you will get a screen that says power off-reboot-power save-recent task. look above that line and you will see your watch (probably says full- screen). Tap that and it will change to a squared screen. Then you can access the full screen in squared mode. Just hit the button on the keyboard for non Chinese (CN/EN). Good luck!

Thanks maaaan....that helped alot...btw..how to use gboard???

Where to find latest FW for this watch?
Also, is it good for running?

Hello, everyone! I'm about to buy the zeblaze thor 4 pro. I'm reading in a site that BT calling is not supported in android 7.0 smartwatces. So my question is, is it true? Have anybody here this model and is using BT calling? (My phone have android 6.0)

Related

RK3066 (MK802 III) Flashtool and Android 4.4.2

Recently I found this interesting Tool ... and I successfully flashed "Allminipc_ug802_RT8188_4.4_720p.img" (Kitkat version) on my MK802 III using Debian Linux 7.5!
Regards, mistersixt.
In case someone is interested: I successfully installed the rk3066 drivers for WinXP using Moborobo, rooted the device with the kingo root tool, and I was able to installed the xposed framework 2.6, too, including XPrivacy, root cloak etc.
So I have a fully 4.4.2 running MK802 III with root access and Xposed framework!
Regards, mistersixt.
mistersixt said:
Recently I found this interesting Tool ... and I successfully flashed "Allminipc_ug802_RT8188_4.4_720p.img" (Kitkat version) on my MK802 III using Debian Linux 7.5!
Regards, mistersixt.
Click to expand...
Click to collapse
Very interesting..Any chance you could share the firmware image file and also let us know how has it been so far...is it fast enough and does the Wifi and Camera (UVC drivers compatible) work w/ this ?
Also could you confirm if this is for MK802III and not MK802IIIS...
Cheers
optimus975 said:
Very interesting..Any chance you could share the firmware image file and also let us know how has it been so far...is it fast enough and does the Wifi and Camera (UVC drivers compatible) work w/ this ?
Also could you confirm if this is for MK802III and not MK802IIIS...
Cheers
Click to expand...
Click to collapse
It is the MK802III, and the stick is running fast and stable. Wifi is as bad as with 4.1 ... but I think this is a general (or hardware related) issue, I am using it with a USB to LAN adapter anyway.
Concerning the camera I have no idea.
Regards, mistersixt.
mistersixt said:
It is the MK802III, and the stick is running fast and stable. Wifi is as bad as with 4.1 ... but I think this is a general (or hardware related) issue, I am using it with a USB to LAN adapter anyway.
Concerning the camera I have no idea.
Regards, mistersixt.
Click to expand...
Click to collapse
Hi,
Thanks for your response.
I've just installed this firmware on my MK802III and it seems no audio video app is working properly. Youtube does not show any video or sound. Neither can I play youtube in the browser.
No streaming media player works either. Only the local media files are playing properly.
The playstore seems to take ages to install apps because of speed, however when I check the internet speed using speed testing app it gives a good enough speed of 7Mbps.
Also i've noticed that there the wifi network connections are getting dropped abruptly. The wifi connection itself seems to be OK but connection from apps such as Airdroid drop out and upload from my local machine via Airdroid takes ages w/ speeds in Kbps.
Can this be fixed please.
Thanks,
OP
optimus975 said:
Hi,
Thanks for your response.
I've just installed this firmware on my MK802III and it seems no audio video app is working properly. Youtube does not show any video or sound. Neither can I play youtube in the browser.
No streaming media player works either. Only the local media files are playing properly.
The playstore seems to take ages to install apps because of speed, however when I check the internet speed using speed testing app it gives a good enough speed of 7Mbps.
Also i've noticed that there the wifi network connections are getting dropped abruptly. The wifi connection itself seems to be OK but connection from apps such as Airdroid drop out and upload from my local machine via Airdroid takes ages w/ speeds in Kbps.
Can this be fixed please.
Thanks,
OP
Click to expand...
Click to collapse
bumping this up..!
can confirm, that works great on Measy U2A.
MK802IIIs up and running
Works brilliantly on my MK802IIIs. Wifi is strong and Bluetooth works out of the box. Already rooted and CWM recovery installed. Now its time for some Xposed magic! Anyone has an idea which XBMC version will run best on this?
I'm using the ROM from this thread http://freaktab.com/forum/tv-player...73-full-1080p-modded-kit-kat-4-4-2-rk3066-rom
Super fast and stable, its like a new machine coming from the old JB ROM I had on there. I can actually use it now.
This ROM is for an Imito device but the MK802IIIS is identical hardware.
Few OC kernels in that thread to to play with.
ozzy lion said:
I'm using the ROM from this thread
Super fast and stable, its like a new machine coming from the old JB ROM I had on there. I can actually use it now.
This ROM is for an Imito device but the MK802IIIS is identical hardware.
Few OC kernels in that thread to to play with.
Click to expand...
Click to collapse
Hi,
The rom seems nice but I just can't get it to run correctly on my MK802IIS. I just flashed the rom on this thread (V 1.1 ) without flashing a custom kernel. Just flashed the entire rom. And after the first boot, I see the apps update (the optimization screen) and then I'm stuck on the screen where there is an Android icon on the top with a blue bar underneath. This screen just keeps blinking and seems to be impossible to pass. I can access the settings, but I found impossible to activate wifi or lan.
Ozzy, you seem to have a MK802IIIS, did I miss something during the flashing? Do I need to flah a custom kernel after flashing the rom?
Linkysly said:
Hi,
The rom seems nice but I just can't get it to run correctly on my MK802IIS. I just flashed the rom on this thread (V 1.1 ) without flashing a custom kernel. Just flashed the entire rom. And after the first boot, I see the apps update (the optimization screen) and then I'm stuck on the screen where there is an Android icon on the top with a blue bar underneath. This screen just keeps blinking and seems to be impossible to pass. I can access the settings, but I found impossible to activate wifi or lan.
Ozzy, you seem to have a MK802IIIS, did I miss something during the flashing? Do I need to flah a custom kernel after flashing the rom?
Click to expand...
Click to collapse
I just flashed the basic ROM with the unmodified kernel. I did try one of the OC kernels but it wasn't stable on my device.
The screen you mention doesn't sound familiar to me.
Did you do a full wipe?
ozzy lion said:
I just flashed the basic ROM with the unmodified kernel. I did try one of the OC kernels but it wasn't stable on my device.
The screen you mention doesn't sound familiar to me.
Did you do a full wipe?
Click to expand...
Click to collapse
Hi, thanks for your answer mate
Yeah I did a full wipe, that's why I don't understand what's happening to me. I see someone on the thread has the exact same problem, but doesn't precise on which device, so I preferred to ask you first, as we have the same device.
I'll just try the v.1.0, mabe that 1.1 version doesn't run on my key. Did you flash the 1.1 or the 1.0 ?
Hello
I know I am a bit off topic but this TV stick is based on the same CPU....Can somebody help me ?
I ordered this
http://www.ebay.co.uk/itm/Dual-Core...g-/111655649656?ssPageName=ADME:X:RTQ:GB:1123 and seller's understanding of the English language is very close to none
Can somebody tell me which webcam models does it support ?
I have just installed Allminipc_ug802_RT8188_4.4_720p on an MK802III. I have used it for an hour and installed all my apps etc.
Both sound and Wifi (Realtek) seems to work.
I've been using mine daily since I posted last time. It works fine except for some hick ups.
Sometimes during bootup it hangs with just 3 penguins on the screen.
And I'm running out of internal disk space all the time. I never did that on the official 4.2 even though I had many more applications installed then. Any ideas how to fix that?
Help please...
I have : BOARD
MK802IIIS
BOOTLOADER
unknown
BRAND
MK802IIIS
CPU_ABI
armeabi-v7a
CPU_ABI2
armeabi
DEVICE
MK802IIIS
DISPLAY
MK802IIIS-eng 4.2.2 JDQ39 eng.zs.20140312.150142 test-keys
FINGERPRINT
MK802IIIS/rk30sdk/rk30sdk:4.2.2/JDQ39/eng.zs.20140312.150142:eng/test-keys
HARDWARE
rk30board
HOST
hotack-desktop
ID
JDQ39
MANUFACTURER
rockchip
MODEL
RKM MK802IIIS
PRODUCT
MK802IIIS
SERIAL
FKO0EQZQGR
TAGS
test-keys
TYPE
eng
UNKNOWN
unknown
USER
zs
CODENAME
REL
INCREMENTAL
eng.zs.20140312.150142
RELEASE
4.2.2
SDK_INT
17
Its rooted just need to know how to UPGRADE THIS TERRIBLE DEVICE....

Smartzen rom!Custom rom android M ze551ml from first beta MM

Hello looking for a stable rom of android 6.0.1 i found this rom from a russian forum but google translate do some mistake in french
So if people can tell me if it's possible to flash this rom with twrp on a z00a running cm13 please help me
I give you the link of this rom smartzen rom
http://4pda.ru/forum/index.php?showtopic=679173&view=findpost&p=46438423
Waiting for the answer
Sent from my ASUS_Z00AD using Tapatalk
I wanna know as well. Let's hope someone who is Russian will help
I don't know if i try flash it or not..
Here the link for 1.1 ver: https://yadi.sk/d/eqVrS13UtZvB5
Installation Instructions
Tested installation through TWRP over beta 6 and 184th - everything went well.
0. Having installed TWRP
1. Make backup data
2. Make a factory reset
3. Sew the firmware and the addons, if they are needed
4. Recover data (in piercing with 5ki because this can cause errors, it is desirable to put clean) (WTF? I dont understand russian)
5. Enjoy
Known bugs
-Gesture inclusion movement in zenmotion may cause reboot when a call reception
- Somewhat works Mobilemanager: no animation at the close of the recent + no animation when you press the Clear button in the application itself
Click to expand...
Click to collapse
Add-ons (are in Yandex link)
- AsusEmail
Returns Asus e-mail. Put, if you want the display of new messages in the window firm cover.
- AsusSoundRecorder
Returns Asus Recorder. We need to record calls.
- AsusSplendid
Setting color. Removing lead to black screen on some games and videos.
- AsusThemeApp
Installer + the default theme + black teia contacts.
-AudioWizard
Setting sound transmission.
- CertInstaller
installer certificates (and other sites).
- HDMI
Playback on TV
- HTMLViewer
viewer html-pages
- LiveWalpapers
- MobileManager
startup Setting and clearing RAM.
- NFC
Returns applications associated with NFC.
- PlayTo
Playing audio / video on other device
- PowerSaving
Power Save Mode from Asus.
PrintSpooler
print spooler. You can download from Google Play
Click to expand...
Click to collapse
Changelog
* Miscellaneous:
¤Kernel from Borets24 on 27/7/2016
¤SuperSU updated to version 2.76
¤Systemless Xposed version 86.2
¤Ikonki Nachtroyki (WTF) applications, FM-radio,
the Asus View Take the Flip the Cover in the style of the new ZenUI
* Interface system:
¤Ubral charge display in curtain
¤Dobavlena shifts the panel curtain with
calendar and volume of media
¤Stil Asus Zenfone 3 * Settings ¤Ikonka item memory from Asus Zenfone 3 * Asus View Flip cover ¤Obnovlena one theme and some icons (in the style of Asus Zenfone 3)
Click to expand...
Click to collapse
Dan_Jacques said:
Here the link for 1.1 ver: https://yadi.sk/d/eqVrS13UtZvB5
Installation Instructions
Tested installation through TWRP over beta 6 and 184th - everything went well.
0. Having installed TWRP
1. Make backup data
2. Make a factory reset
3. Sew the firmware and the addons, if they are needed
4. Recover data (in piercing with 5ki because this can cause errors, it is desirable to put clean) (WTF? I dont understand russian)
5. Enjoy
Known bugs
Add-ons (are in Yandex link)
Changelog
Click to expand...
Click to collapse
Did you test it?
moomoon03 said:
Did you test it?
Click to expand...
Click to collapse
Downloading. But my internet connection is a crap, even with free Yandex account the download is at 24KB/s.
Dan_Jacques said:
Downloading. But my internet connection is a crap, even with free Yandex account the download is at 24KB/s.
Click to expand...
Click to collapse
Oh ok and what firmware are you using now?
I am on RR 5.7.1 it's a nice rom but i am sad with game performance and i miss asus cover to be honest
moomoon03 said:
Oh ok and what firmware are you using now?
I am on RR 5.7.1 it's a nice rom but i am sad with game performance and i miss asus cover to be honest
Click to expand...
Click to collapse
I'm at RussiaNBeaR 7.3, based on stock .184 firmware. I miss the PixelMaster app in the RR (and, more precisely, XOSP - my preferred rom), so I come back to stock based. Apparently you can jump from .184 and the first MM build to this ROM (Google Translate, please dont fool me).
Dan_Jacques said:
I'm at RussiaNBeaR 7.3, based on stock .184 firmware. I miss the PixelMaster app in the RR (and, more precisely, XOSP - my preferred rom), so I come back to stock based. Apparently you can jump from .184 and the first MM build to this ROM (Google Translate, please dont fool me).
Click to expand...
Click to collapse
Idk if after a full wipe i can install it after my RR cause i don't want lose my twrp
moomoon03 said:
Idk if after a full wipe i can install it after my RR cause i don't want lose my twrp
Click to expand...
Click to collapse
I think you will need to use the tethered twrp
Dan_Jacques said:
I think you will need to use the tethered twrp
Click to expand...
Click to collapse
I just have the permanet recovery 3.0.0.0
This afternoon i try this rom !!
flashed this rom via TWRP over russian Bear & Borets Rom based on v184. Now cant boot the phone. only vibrate when press and hold the power button. Any help?
quadeur06 said:
This afternoon i try this rom !!
Click to expand...
Click to collapse
Yes do yiu have permanent twrp and after tell us if it work???
Thx
Yes i have permanent twrp
But..For flash this rom.. i must be in 6.0 beta and after flash this rom or it's not important if i am in 194?
vyaskd said:
flashed this rom via TWRP over russian Bear & Borets Rom based on v184. Now cant boot the phone. only vibrate when press and hold the power button. Any help?
Click to expand...
Click to collapse
To unbrick your phone, try this: [Guide] Un-brick both (Soft/Hard) bricked Zenfone 2 ze550ml/ze551ml
Apparently, the custom MM ROM has the same implications the official one. I was thinking to flash raw image like the @Russiamen upgrade guide. Maybe this way the system would be closest to stock and reduce the brick chances.
Dan_Jacques said:
To unbrick your phone, try this: [Guide] Un-brick both (Soft/Hard) bricked Zenfone 2 ze550ml/ze551ml
Apparently, the custom MM ROM has the same implications the official one. I was thinking to flash raw image like the @Russiamen upgrade guide. Maybe this way the system would be closest to stock and reduce the brick chances.
Click to expand...
Click to collapse
So no chance to test this rom since a .184 based rom???
moomoon03 said:
So no chance to test this rom since a .184 based rom?����
Click to expand...
Click to collapse
According the 4pda forum yes, there is a chance, and the Russiamen let you to do it this way, flashing RAW image and .184 zip ROM.
please help me to my post!! It's a very hard brick with this rom..I don't have bootloader...recovery nothing What is the solution ? I can't use adb because i don't have bootloader...

DOOGEE MIX - Development & Support

In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.​
ROMs:
HOW-TO Root and Install Stock ROM: https://docs.google.com/presentation/d/1NJcDBkLk8zMwyv2BTqRjn2NB_ZOWKjP1fRpSVr44Oxk
To avoid any possible issue, do not forget to backup your NVRAM so that you won't risk to lose your IMEI. How-to: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Stock (Android 7.0) - 4+64 Variant
- 20171028: https://mega.nz/#!4Lo2TJyJ!-m8rhxTJ3VCFjQnLfauIC2dGMfnPwGtcs7o32J4Et-k
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Firmware Upgrade" instead.
Previous Releases:
- 20171022: https://mega.nz/#!t6onDL5D!JI3mdIyqG2A_pXtZ-vKzCAwj-QFBAFPCRIiM6TbbDZY
- 20170830: https://mega.nz/#!kLYjVTpY!l8_hoKlS7d0_RLV71xUBwL1w0lR11PN4IVPC1u26EEM
- 20170615: https://mega.nz/#!ZeQTARAQ!Z8q1hUWtMn6SXFtL-PfTFbwvQz6G9i46WosEXlU2ay0
Stock (Android 7.0) - 6+64 Variant
- 20171028: https://mega.nz/#!0bxyDQbb!FOnbe5cYZr7Q7DWQKgSx4IQ7Keiy7fD5aZ55ZOe9zDc
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Firmware Upgrade" instead.
Previous Releases:
- 20171022: https://mega.nz/#!FOQHRIhB!nTA2F2SVAs4ncESTAJRyvHBIMBw5QU8Ot1Vl7lQL418
- 20170810: https://mega.nz/#!IP5xwabB!D2i1ac-utl6A8A-q77cvwE0iQmJBrjz1-c6imAZ5Xhg
- 20170621: https://mega.nz/#!AfIz3SLb!41TxksnjlcgN51t1MggQdoVRlVPiajcebaO6BEEpeug
Flash Tool
- SP Flash Tool for Windows and Linux: https://mega.nz/#F!dYUm0TbB!SWeMLb5Wu1NbRzTPQ8-s_A​
Recovery:
- TWRP 3.1.1 by @jemmini (20170810 based): https://mega.nz/#F!FVsH2JLR!bKDbF3Wz3Jsyk8_A4R_m4g​
Root:
Rooting Methods (if you are on Stock ROM)
- Pre-rooted boot.img for 4/64 variant: https://forum.xda-developers.com/showpost.php?p=74358280&postcount=335
- SuperSU (flashable using TWRP): http://forum.xda-developers.com/apps/supersu​
Extras (Root-Only):
Customization
- Xposed Framework: http://forum.xda-developers.com/showthread.php?t=3034811​
Useful Third-Party Apps:
Battery Life
- Amplify: https://play.google.com/store/apps/details?id=com.ryansteckler.nlpunbounce&hl=en
- Greenify: https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en​
How u do it man... So many development for so many devices... Share some knowledge dude.
sagargjasani264 said:
How u do it man... So many development for so many devices... Share some knowledge dude.
Click to expand...
Click to collapse
For Mediatek Devices it is pretty easy because if you manage to build a ROM for a device that has its software made by the same company who did the same software for another device (i hope this sentence is clear), then you can build a ROM for both devices with just some minor changes.
Alberto96 said:
For Mediatek Devices it is pretty easy because if you manage to build a ROM for a device that has its software made by the same company who did the same software for another device (i hope this sentence is clear), then you can build a ROM for both devices with just some minor changes.
Click to expand...
Click to collapse
Yep.. Got that line clearly... But what to do when u don't have source codes for your perticuler device or similar device with same company and software ? U can't build.... Am i right?
If its possible pls pm me.. I dont wanna add more off topic comments in ur thread..
sagargjasani264 said:
Yep.. Got that line clearly... But what to do when u don't have source codes for your perticuler device or similar device with same company and software ? U can't build.... Am i right?
If its possible pls pm me.. I dont wanna add more off topic comments in ur thread..
Click to expand...
Click to collapse
I'll just reply here for the last time, it is OT, but still useful for development
When there is no kernel source code, i use the prebuilt kernel image (included with the Stock ROM), while everything else gets compiled (excluding proprietary files required to handle the hardware).
Alberto96 said:
I'll just reply here for the last time, it is OT, but still useful for development
When there is no kernel source code, i use the prebuilt kernel image (included with the Stock ROM), while everything else gets compiled (excluding proprietary files required to handle the hardware).
Click to expand...
Click to collapse
I don't know i got last part correctly or not but i will google now for that.. Anyways thanks for information man.. Keep it up ur work.. And keep sharing knowledge..
... the rom - download (mega) is it working with the 4gb version too? great job so far...
i have tried that rom, it does not work for 4gb version, doogee logo stuck on the screen
---------- Post added at 12:01 PM ---------- Previous post was at 11:58 AM ----------
i bought phone from banggood came with offical outdated software, so i will never get update.the only rom with update is 20170621. the rom that we have here 6gb version,hope someone will provide rom 20170621 for 4gb version.
many thanks
I'm also wondering about ROMs for the 4gb version of the phone? Have they updated that to the same level as the 6gb ROM? I thought the specs were identical apart from the extra 2gb of memory??
Can you do a rom for 4gb Version?
pheemc said:
Can you do a rom for 4gb Version?
Click to expand...
Click to collapse
"Can you do" doesn't exist yet.
It is only the Stock ROM provided by DOOGEE directly, not something I made. You have to ask DOOGEE if you want other variants, then provide me the link.
Ah okay, i thought this was the pure stock Android Rom without Doogee "bloat".... Do you think there will be a lineage Version in future?
pheemc said:
Ah okay, i thought this was the pure stock Android Rom without Doogee "bloat".... Do you think there will be a lineage Version in future?
Click to expand...
Click to collapse
It's too early to discuss about source-built ROMs, this is a pretty new platform.
hi guys,i cannot find any source that i can obtain doogee mix 4gb varient rom(build 20170621),i already asked admin doogee mix forum ,but no response.any idea where we can get that rom? thanks
the rom does not work . the flash tool say the scatter is invalid
libuda04 said:
the rom does not work . the flash tool say the scatter is invalid
Click to expand...
Click to collapse
It does, I have flashed it on my own MIX.
How did you flash it with SP Flash Tools?
When i connect and try it says BROM ERROR: STATUS_BROM_CMD_SEND_DA_FAIL(0xC0060003)
What does it mean.
I installed drivers for MT67xx and latest SP Flash Tool
I have my phone turned off and when i connect (after clicking download in SP Flash Tool) it says the error.
Hi guys, i'm pretty novice about all of this and i dont speak english a lot, i have a problem with my new DOOGEE MIX (6gb i think), i tried to uninstall the "DOOGEE OS" many times but i failed all time. There is a cat/gameboy on my screen and i cant remove them, maybe i can find an issue here. Thank a lot in advance and have a good day !
hi, do following:
home screen, press on the screen a few seconds,you will see launcher settings, then turn off search bar and know on home screen
hans2001 said:
hi, do following:
home screen, press on the screen a few seconds,you will see launcher settings, then turn off search bar and know on home screen
Click to expand...
Click to collapse
Oh yeah it worked ! I have almost intalled something for "root" my phone. Thank a lot dude !:laugh:
Do you know how to remove the last background on the left too ? The one with all the newspapers ? I'am actually searching on the new launcher settings but i cant find it, thank .

[ROM] Custom ROM for MTK6580 Smartwatch (X5 Air / LEM5 Pro)

There has been quite a bit of development on the full smartwatch front recently; notably the OpenWatch project that is in full swing and pretty much covered all the main manufactures and variants that are available.
Hopefully a new OS will be available shortly; however in the meantime Id like to offer this ported Resurrection Remix to the community as I have been asked a number of times to release it for testing.
I have been using this for about a fortnight now and so far am very pleased with the results. Battery life has been tripled with hibernation, and root access provides more potential.
Please note that the UI has not been optimized for round screens however anything awkward can be done via PC and a screen cast app. Im using Vysor.
Installation:
Install .zip via TWPR in the usual fashion. Factory reset wipe is recommended.
As always please process a full backup of your existing software inc. all partitions you have available (NVRAM etc) before flashing so you have a safe return point.
Details:
Resurrection Remix ROM 5.5.9 for MTK6580
Android Version: 5.1.1
Kernel: 3.10.72+
Ported for: Finox X5 AIR / LEMFO LEM5 Pro
Known Bugs:
Bluetooth - file transferring is 50/50
Display not optimised
No clock engine - please use Ricktops Universal Launcher to regain this function.
Palm brightness - use home button to turn screen on and off.
Suggestions:
Please allow 5+ minutes for OS for intial loading after flash.
Kernel editor - reduce max CPU frequency to 600Mhz
Install Xposed framework for Lollipop 5.1.1
Greenify (and enable framework in Xposed)
Change DPI to 200 - play around with this to see what suits you best
Enable expanded desktop for all apps
Use Battery Saving Mode and Airplane Mode when possible.
Once you have set up everything do a further backup to save you setting everything up again.
All credits to the Resurrection Team for their ROM. I have not altered any aspect of the original, simply ported this over to my device.
This should work on any 5.1.1 smartwatch if properly ported using your stock files. Please see ported folder in download link to see which file I have corrected. Replacing these files with your own stock resources should work.
Download Link: http://bit.ly/2vjWHue
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@migueldbr
Here is the ported Resurrection ROM for the Thor Pro - I honestly have no idea if this will work as I cant test it, but in theory it should?
You mentioned that you have a full backup already, I would suggest copying the BACKUP folder from the TWRP folder on your SD card to your PC so you can transfer it back in the event you need to do a full wipe if this bootloops. If you are using SPFT then chances are you will return back to stock recovery unless you modify the stock fw. From experience, its easier to just do a fresh flash when these thing dont work.
If you see the RR logo, wait a good 5-10 minutes for it to load. If it doesnt, chances are the port failed. In which case Im sorry.
Id also grab the Universal Launcher from an apk mirror so you can get the watch functions back and also using Vysor to set it up makes it much easier. Suggestions are in post above.
With regards to the connect phone app, it should work - Im using watchdroid to ping notifications over and it works with no issues.
Good luck! And let us know how you get on. Fortune favours the bold.
Download Link:
DELETED
NB. Stock ROM was version Thor_Pro_XY_C5_X300_v1.5_20180619
CerebralFlex said:
@migueldbr
Here is the ported Resurrection ROM for the Thor Pro - I honestly have no idea if this will work as I cant test it, but in theory it should?
You mentioned that you have a full backup already, I would suggest copying the BACKUP folder from the TWRP folder on your SD card to your PC so you can transfer it back in the event you need to do a full wipe if this bootloops. If you are using SPFT then chances are you will return back to stock recovery unless you modify the stock fw. From experience, its easier to just do a fresh flash when these thing dont work.
If you see the RR logo, wait a good 5-10 minutes for it to load. If it doesnt, chances are the port failed. In which case Im sorry.
Id also grab the Universal Launcher from an apk mirror so you can get the watch functions back and also using Vysor to set it up makes it much easier. Suggestions are in post above.
With regards to the connect phone app, it should work - Im using watchdroid to ping notifications over and it works with no issues.
Good luck! And let us know how you get on. Fortune favours the bold.
Download Link:
http://bit.ly/2p1uCnN
NB. Stock ROM was version Thor_Pro_XY_C5_X300_v1.5_20180619
Click to expand...
Click to collapse
Awesome man, thanks a lot! I will test it tomorrow because it is 23:30 here in Portugal so its late. But tomorrow once I get back from work I will test it. Btw does it include the "connect phone" app to be able to use with wiiwatch? Or do I have to install later as system app or something?
migueldbr said:
Awesome man, thanks a lot! I will test it tomorrow because it is 23:30 here in Portugal so its late. But tomorrow once I get back from work I will test it. Btw does it include the "connect phone" app to be able to use with wiiwatch? Or do I have to install later as system app or something?
Click to expand...
Click to collapse
I hope it works for you; would open it up for more people to hopefully improve it.
Im sorry Im not familiar with connect phone or wiiwatch? If its a app that came with the watch you could maybe look for it on the manufactors website? However WiiWatch - Watch Assistant is available on the app store (or an apk mirror) if this is what you mean? Could try that.
Keep us posted.
CerebralFlex said:
I hope it works for you; would open it up for more people to hopefully improve it.
Im sorry Im not familiar with connect phone or wiiwatch? If its a app that came with the watch you could maybe look for it on the manufactors website? However WiiWatch - Watch Assistant is available on the app store (or an apk mirror) if this is what you mean? Could try that.
Keep us posted.
Click to expand...
Click to collapse
The connect phone app comes pre installed on the stock rom and that's what makes it able for the wiiwatch app to find the phone...and I have no other alternative because I have an iPhone:/. Anyway I will try the rom!
It didn't work...some errors like "error 7" and some "symlinks missing". I think I am going to sell it because it simply does not work properly with the iphone, it causes major battery drain on my phone because of the wiiwatch app to connect=/
But thanks a lot for your help!
migueldbr said:
It didn't work...some errors like "error 7" and some "symlinks missing". I think I am going to sell it because it simply does not work properly with the iphone, it causes major battery drain on my phone because of the wiiwatch app to connect=/
But thanks a lot for your help!
Click to expand...
Click to collapse
Damn error 7 - i removed the asserts from the updater script - so it could be a number of other things.
Im sorry it didnt work mate. I would be up for trouble shooting it with you but would be so hard pin pointing the problem without a device to test it on here. Best just wait for OpenWatch to be released, or as you said sell it. I wonder what the delivery would be from Portugal to UK? : )
I appreciate you giving it a shot, ill remove the link so no-one else tries.
All the best.
CerebralFlex said:
Damn error 7 - i removed the asserts from the updater script - so it could be a number of other things.
Im sorry it didnt work mate. I would be up for trouble shooting it with you but would be so hard pin pointing the problem without a device to test it on here. Best just wait for OpenWatch to be released, or as you said sell it. I wonder what the delivery would be from Portugal to UK? : )
I appreciate you giving it a shot, ill remove the link so no-one else tries.
All the best.
Click to expand...
Click to collapse
I am now waiting for the battery to run out because I don't know the combination to boot into twrp xD. Also, unlike cellphones, forcing the power button doesn't turn it off, it just keeps rebooting. Thanks a lot for your help. I contacted zeblaze and they said they would look into the issues. First they sent me a firmware to try (which was older than the one you based the rom on, which was the same that came with my watch lol). Zeblaze seems to be very unorganized, even their site does not have firmware available to download...its a shame really, I wish i had bought a lemfo or kingwear!
migueldbr said:
I am now waiting for the battery to run out because I don't know the combination to boot into twrp xD. Also, unlike cellphones, forcing the power button doesn't turn it off, it just keeps rebooting. Thanks a lot for your help. I contacted zeblaze and they said they would look into the issues. First they sent me a firmware to try (which was older than the one you based the rom on, which was the same that came with my watch lol). Zeblaze seems to be very unorganized, even their site does not have firmware available to download...its a shame really, I wish i had bought a lemfo or kingwear!
Click to expand...
Click to collapse
If you want to speed it up remove the backplate and follow the battery ribbon to the motherboard. If you use something pointy but rounded you can just pop the contact up (disconnecting the battery) then push it back on. But you will most likely need to reflash with SPFT unless you have a way of booting into TWRP from power off.
It is ashame they arent more on the ball with updates etc, ive heard this alot with zeblaze. definetely go LEMFO or KW next - ive been told these have a very secure future and support is now officially by the RASC community from what I know.
Yeah that’s bad they don’t want to support the Thor pro is a really good budget device with big screen and outside readable, we still have the original firmware and not updated, yeah I have an IPhone to and the Bluetooth connection is not so good but it works the Bluetooth calling works too good and I have to install an app Volume booster because is so low and for the position of the hardware is really bad this device has potential. I am waiting for my Lemfo LemX
Good work on the port. Im trying to get RR on my Microwear H2 (1gb 16gb) I have a working TWRP recovery. Could you point me in the direction of the port guide you followed for your watch so i can try and port it myself. Thanks
Also, have you managed to port any higher versions of android for your watch? I am aware of the Openwatch project, which brought me to your post.
EDIT: Just read the last few lines of your 1st post. Will have a go as you have suggested. Thanks
CerebralFlex said:
There has been quite a bit of development on the full smartwatch front recently; notably the OpenWatch project that is in full swing and pretty much covered all the main manufactures and variants that are available.
Hopefully a new OS will be available shortly; however in the meantime Id like to offer this ported Resurrection Remix to the community as I have been asked a number of times to release it for testing.
I have been using this for about a fortnight now and so far am very pleased with the results. Battery life has been tripled with hibernation, and root access provides more potential.
Please note that the UI has not been optimized for round screens however anything awkward can be done via PC and a screen cast app. Im using Vysor.
Installation:
Install .zip via TWPR in the usual fashion. Factory reset wipe is recommended.
As always please process a full backup of your existing software inc. all partitions you have available (NVRAM etc) before flashing so you have a safe return point.
Details:
Resurrection Remix ROM 5.5.9 for MTK6580
Android Version: 5.1.1
Kernel: 3.10.72+
Ported for: Finox X5 AIR / LEMFO LEM5 Pro
Known Bugs:
Bluetooth - file transferring is 50/50
Display not optimised
No clock engine - please use Ricktops Universal Launcher to regain this function.
Palm brightness - use home button to turn screen on and off.
Suggestions:
Please allow 5+ minutes for OS for intial loading after flash.
Kernel editor - reduce max CPU frequency to 600Mhz
Install Xposed framework for Lollipop 5.1.1
Greenify (and enable framework in Xposed)
Change DPI to 200 - play around with this to see what suits you best
Enable expanded desktop for all apps
Use Battery Saving Mode and Airplane Mode when possible.
Once you have set up everything do a further backup to save you setting everything up again.
All credits to the Resurrection Team for their ROM. I have not altered any aspect of the original, simply ported this over to my device.
This should work on any 5.1.1 smartwatch if properly ported using your stock files. Please see ported folder in download link to see which file I have corrected. Replacing these files with your own stock resources should work.
Download Link: http://bit.ly/2vjWHue
View attachment 4600459 View attachment 4600460 View attachment 4600461 View attachment 4600462
Click to expand...
Click to collapse
Sir,
Can i requst a custom rom for Mango Galicia phone? i found no custom rom in corner of internet fot this phone.
The device is mtk-6580.
Looks like the link is dead, any chance in re-uploading it ? =E
I just bought this Smartwatch and with an rom as option, it would make my day =)

Help to identify firmware for MK809IV TV stick with RTL8723bs WiFi

Hi,
a week ago I bought the following MK809IV TV stick and I bricked it without making a backup.
I need your help to find the right firmware for it.
External packaging is labeled MK809IV with a red slider.
Board version: H122V1.4 0422 without a NAND chip.
Label on the back: RK29_809_V1.0 221 # - HXB_19060601
Processor: RK3229
Board: rk30board
GPU: Mali 400 MP
RAM: 2Gb
ROM: 8Gb
WiFi: RTL8723bs
Original firmware was based on:
Version: Android 7.1.2
Build: hx322x_box-userdebug...
kernel version: 3.10.104
I tried to flash dozens of firmware, and the only one that actually works is:
rk3229_7.1_box_MX4VB_SSV6051p_SpecTek_flash-update_20171209
but it shows only 1Gb of RAM and does not have the WiFi.
Any help is appreciated!
Thanks and regards.
Ok guys, finally I found a working solution for this TV Stick.
Let me share my solution:
Basically, as mentioned in the first post, I found a working firmware with no wifi and just 1Gb of ram: rk3229_7.1_box_MX4VB_SSV6051p_SpecTek_flash-update_20171209
So I continued to search for a different firmware and I found this one:
G809_3229_L_2G_8723_20180517_1451_2018070601
Unfortunately also this last one is not able to boot, but what I though is why don't try to flash this last firmware anyway and using the bootloader from the previous one?!!
So I have extracted the Loader, uboot and trust images from the first one (rk3229_7.1_box_MX4VB_SSV6051p_SpecTek_flash-update_20171209) and flashed over the already flashed second one (G809_3229_L_2G_8723_20180517_1451_2018070601) using RK_Android_Tool v.2.3.9.
Steps are:
1. Flash G809_3229_L_2G_8723_20180517_1451_2018070601 image using BatchTool and selecting "Restore".
2. Make a short with a paper clip to the pins 6-7 and plut the USB in the OTG port
3. Load the Working images: Loader, uboot, trust and parameter files to RK_Android_Tool v.2.3.9
4. Start the flashing
First boot required about 10 minutes.
The archive includes all the needed software for flashing, the firmware and the extracted working images for the bootloader.
Hope it can help others!
Enjoy!
Download link: https://drive.google.com/open?id=1rLtdJlHnHmrie0goBUlD5LAqCi5Dvfrw
MK809IV
Hi, I have the same device and I want to ask, shorting 6-7. What do you mean. Where and how to find these pins. How do I start flashing. I can ask you for a more detailed procedure. well thank you. when i held the reset button and connected via usb to pc so nothing happened. Thank you.
wow and cheers Found my "piece of crap^^" in a cupboard and just recognized, that google-login not been working anymore - so i decided to look for some "updates" .... theres really not only one ROM for it after 1 day of searching :/ ... tried out ARMBIAN - only 1GB ram recognized and only 1,2Ghz and nice to see Linux on it but Wifi too unstable and even with ethernet hard to use .... tried out Librelec - most plugins not working here in germany ... last but not least i tried out your courious method - and it works ... but had an 7.1 preinstalled and now dowgraded ... but working
Isn't it possible to match that two parts together in one ROM ? and maybe with a newer Kernel ?
If somebody finds a other working ROM for a RK3229 MK809IV 2+8 pls post here :/ - i'll have a look in some years again i guess
Nearly 4 years passed i'm still the only one, who has to thank you very much dear Goolpone ?!
K - n good morning^^ ... spent my night by seeing Programs not really loading and crashing ... rejoiced too early :/ Seeker (Soulssek client for Android) seems to be the only usefully working App :/ .. and the laggiest lags i've ever seen on a computing device the whole night long .... reflashing ARMBIAN now as the final state of my poor stick ... you can nicely watch the lags in system monitor graphs there and afterall it's not too bad .... but only for museum purposes^^ anyways regards to everyone stomping over here
... maybe last comment - Telegram working nice at ARMBIAN ... at least you can read your papers with it ... anyways armbian seems to be the only usefull thing you can do with that poor device ...

Categories

Resources