I changed a cracked screen on a Nexus 4. I have done this before with no problems. It is not rooted and locked to a carrier. Now it is stuck in bootloop.
Now the real problem is that even though the phone will take a charge, when I connect it to a PC it the PV doesnt see the phone and it doesn't show up in file folders or in Nexus Toolkit.
So I cannot access ADB either since the PC doesn't see the device and same with Nexus Toolkit.
I can boot into recovery mode but it goes to Android man on back with red flag and "No Command Found" message.
I have spent a week on this. Who out there knows what the hell I can do. I have thought about swapping out the charger port to see if thats why the pc isnt seeing the phone...I am stumped. Help would be very appreciated folks.
Thanks
Wallstud44 said:
I changed a cracked screen on a Nexus 4. I have done this before with no problems. It is not rooted and locked to a carrier. Now it is stuck in bootloop.
Now the real problem is that even though the phone will take a charge, when I connect it to a PC it the PV doesnt see the phone and it doesn't show up in file folders or in Nexus Toolkit.
So I cannot access ADB either since the PC doesn't see the device and same with Nexus Toolkit.
I can boot into recovery mode but it goes to Android man on back with red flag and "No Command Found" message.
I have spent a week on this. Who out there knows what the hell I can do. I have thought about swapping out the charger port to see if thats why the pc isnt seeing the phone...I am stumped. Help would be very appreciated folks.
Thanks
Click to expand...
Click to collapse
What happened to this? I have the same damn issue. Although I managed to get fastboot and adb functionality with great difficulty. But the device doesn't seem to be able to boot into anything. I've tried every single thing software by the book, and by the forums too. I suspect it might be hardware.
Any luck?
hello Geniuses i have problem with my GS4 Sprint version kindly asking if some body could help me out to get my phone working
the problem started when i downloaded a file call Secsetting2.apk because i wanted to change the shape of my setting and my notification panel to the lollipop interface at the beginning i did copy that file to app-priv folder and i gave the permission required but it only change my setting and it didn't work for the notification panel so what i did <i know its stupid> i delete the original two files called secsetting.apk
and secsetting.odex and i might deleted another file its name something like secsystemprovider
after i reboot my phone i got stucked on the yellow sprint screen and i could not access my phone any more
i tried to install a stock rom but it didn't work it keeps show me fail <did that using odin>
now i'm stuck in the downloading mode and i can't pass that i can't even get to the recovery mode any ideas what should i do.
looking forward for your help thanks.
hey it's been 3 days and i'm still surfing the internet for a solution for my new lg g2 verizon version
i have did couple o things and each time it just gets worse & worse....
my phone ends up no boot noo recovery no download mode is working
just full black screen and when i connect it to pc it shows unknown usb device (device descriptor request failed)
can somebody help me step by step please?
Info needed
khaledsankar said:
hey it's been 3 days and i'm still surfing the internet for a solution for my new lg g2 verizon version
i have did couple o things and each time it just gets worse & worse....
my phone ends up no boot noo recovery no download mode is working
just full black screen and when i connect it to pc it shows unknown usb device (device descriptor request failed)
can somebody help me step by step please?
Click to expand...
Click to collapse
First off, you did a couple o things.... Might want to expand a little bit about what you did.
The more detail you give, the better chance someone can help.
So to begin with, what was the things that you did? And as I said details help, the more detailed you are the better.
Second, you connect it to a pc..... details. Can always assume that you are using a Windows machine, but assuming does very bad things in the long run.
What type of PC are you connecting it to?
What version of the software is that system running (if windows, Win98, WinXp, Win7, Win8, etc). Have you installed the ADB drivers if on windows?
Was your LG G2 recognized by ADB before all of this happened?
As for the boot up, do you see the LG logo?
Can you reboot your phone?
When you reboot your phone, do you see any error messages?
You also should include some info about the phone.
I believe your model number is: VS980
But you should include a little bit more about the phone if you know it such as, even say if it was stock as that gives a starting point:
Kernel
Rom
Modem (Verizon has 4 different ones)
All of that is the basics if you have any hope of finding someone who can help you.
- Niscandia
g2 verizon VS980
Niscandia said:
First off, you did a couple o things.... Might want to expand a little bit about what you did.
The more detail you give, the better chance someone can help.
So to begin with, what was the things that you did? And as I said details help, the more detailed you are the better.
Second, you connect it to a pc..... details. Can always assume that you are using a Windows machine, but assuming does very bad things in the long run.
What type of PC are you connecting it to?
What version of the software is that system running (if windows, Win98, WinXp, Win7, Win8, etc). Have you installed the ADB drivers if on windows?
Was your LG G2 recognized by ADB before all of this happened?
As for the boot up, do you see the LG logo?
Can you reboot your phone?
When you reboot your phone, do you see any error messages?
You also should include some info about the phone.
I believe your model number is: VS980
But you should include a little bit more about the phone if you know it such as, even say if it was stock as that gives a starting point:
Kernel
Rom
Modem (Verizon has 4 different ones)
All of that is the basics if you have any hope of finding someone who can help you.
- Niscandia
Click to expand...
Click to collapse
Yehbits VS980 im using toshipa laptop running windows 8.1.
Okay i'll explain in all the details which i can remember:
first, i was running custom firmware (optimus g3 latest version) then i wanted to flaahbit again to add some stuff but i wasnt concentrated so i've selected a different model which is the international model
It flashed normally but when its done and reboots, it showed lg logo
Then fastboot mode It used to go to the download mode but didnt flash stock or anything. I did some commqnd on fastboot to add recovert.img stuff but after that it was reboting showing lg logo then shows small written stuff and goes to screen and showing 10000's partitions. So i did that ubunto method for tz aboot and those stuff and it didnt work but i did it 100% right. Then i did download more things and did the same way for them. Like boot and modem and stuff but i think the phone was disconnected and now it shows black screen i cant even recognize if its on or off and no matter what i press it doesnt show any logos or smthn but it connect to windows and shows usb device not recognized.
Hello Everybody,
I have an issue with a 830L tab which got in my hands by a friend who did a "unknown" update, and from that moment the tablet is stuck. It powers on correctly, but can only go in the setup page (white background and blue characters) and can also be powered on in fastboot mode. Nothing else. I found a lot of stuff on the net and in this site too, but nothing gets me out of this situation.
I tried to flash the tablet with Lenovo_Yoga_Tablet_2_830L_S000197_ROW and Lenovo_Yoga_Tablet_2_830L_USR_S000067_141030 firmwares, but with both of them, after cmd1 (fastboot boot droidboot.img) the tab goes off and then on normally, so it gets disconnected from the pc and the flashing fails (I also set the sparsing to 500MB). I also tried with restore-kitkat-bios-830-1050-v2 which is correctly displayed but doesn't act as a cure: keeps saying "prepairing for push files" but doesn't move from that point.
In the setup page is displayed BLADE_21.X64.0005.R00.1504101447 FFD8_X64_R_2015_04_10_1448
Could it be any setting in the setup page which may affect the flashing?
Can anyone help?
Thanks in advance
please... just a little help...
Hello guys so im a total noob here, and i just want to mess up with my phone.. I tried this https://forum.xda-developers.com/note-4-tmobile/general/resolution-density-change-t3037153
To change my phone density but i totally messed up. My phone icon and everything became soo big and my mistake is i restarted my phone now after restart i cant unlock my phone because the pattern is so big i mean usually u will see 9 dot in pattern and u will specify the dot to unlock your phone, in my case i see only 3 dot and i cant complete my pattern bcoz theres only 3 dot.. Pls advice what should i do to revert my phone back to normal.
Btw i try adb command using pc but my device is unauthorized and i cant autorized my pc because i cant unlock my phone.. Sorry for my bad english.
Pls see attach photos