hello Geniuses i have problem with my GS4 Sprint version kindly asking if some body could help me out to get my phone working
the problem started when i downloaded a file call Secsetting2.apk because i wanted to change the shape of my setting and my notification panel to the lollipop interface at the beginning i did copy that file to app-priv folder and i gave the permission required but it only change my setting and it didn't work for the notification panel so what i did <i know its stupid> i delete the original two files called secsetting.apk
and secsetting.odex and i might deleted another file its name something like secsystemprovider
after i reboot my phone i got stucked on the yellow sprint screen and i could not access my phone any more
i tried to install a stock rom but it didn't work it keeps show me fail <did that using odin>
now i'm stuck in the downloading mode and i can't pass that i can't even get to the recovery mode any ideas what should i do.
looking forward for your help thanks.
Related
I can't boot my sprint Hero into recovery mode, it I go through HBoot it just gives me an error screen, what can I do?
So no replies I'll add some info I've come up with
So I rooted my Sprint Hero and everything went fine, but when I try to flash a recovery image it says the file isn't found even though I checked the spelling and if I ls my sdcard it shows up.
More importantly though my phone won't boot into recovery mode via the command prompt or the Hboot screen. It just shows me a picture of an exclamation point and a phone laying down, one time it game me some error
E: can't open/cache/command or something like that.
Please help and let me know of any other info I need to give
i had the same issue ... i think it has something to do with the software version that u are running on the phone .. did u install the new software release from sprint? ... if so it seems u have to downgrade first before u can load in recovery zone .. but doing so wipes out your phone to the day u took it out of the box.. so back up contacts, calendar etc to google sync .. all your apps u will have to install again
go to menu/settings/about and look for software version on the bottom..is it 1.5.xxxx.. ? if so read below
Download
ftp://xda:[email protected]_release.exe
Install HTC Sync - and make sure it does recognize the phone. this is on your sd card under htc sync.. sopy file to pc and click on it... Once that is done, run RUU_Hero_C_Sprint_1.29.651.1_signed_release.exe and agree to the terms and conditions.
This will erase and bring your built # from 1.5.xxxx to 1.29.651.1.
Then follow the "theresthatguy" instructions on link -
http://forum.xda-developers.com/showthread.php?t=583291
do a NANDROID backup 2.2 hightly recommended and once the phone finished/reboot on normal mode, mount the SD and grab the NANDROID folder sitting on your MicroSD card. Keep that handy.
Either the link to the RUU is broken or I don't know what I'm doing but it says server not found and the only other place I can find it is rapidshare and it says there's no more slots, I guess I'll keep trying
Edit: I don't know what the deal is but I got the recovery image flashed and it booted right into recovery mode just fine this morning
I was changing some files in the framework-res.apk and when I reinstalled, the phone starts up and when I unlock its just blank. On the notification bar I can access Folder Organizer lite and thats all. Any help would be helpful because my pc cant recognize it anymore otherwise I would adb it back to normal.
Update: Now I tried rebooting it again and now its stuck in a boot loop. Is there anyone that can create and update.zip from a stock 2.1 droid x that will install all the data, and system files so I can get it back up and running?
Push the original framework.apk back to your phone.
I cant cause it doesnt connect via PC. The usb output wont register on my PC. And now I cant because its stuck in a boot loop
Follow the sbf flash guide here
http://rootzwiki.com/index.php/Smartphones/Motorola/Droid-X/Droid-X.html
It will restore your phone back to factory, keep your settings, and will unroot you if you rooted (you can root again though)
OMG THANK YOU SO MUCH!!!! This is why I love the Android community.
Download mode, but cant dl anything from pc to phone now even using odin.
Phone just stuck in boot loop.
Got as far as loading twrp onto it via odin and then when tried search for file just blank folders, nothing in them.
So worried totally bricked it. everyone says get into safe mode, but when try to all it goes to is twrp.
HELPPP!!!!
If you can get into TWRP and aree able to do a complete wipe. It will return your OS to factory settings and fix the boot loop. Other wise try the emergency recovery on Smart switch.
You will need your model information as well as the phone serial number.
Oh,
even phone storage showing "0" in twrp and try wipe just fails.
Cosmic Blue said:
If you can get into TWRP and aree able to do a complete wipe. It will return your OS to factory settings and fix the boot loop. Other wise try the emergency recovery on Smart switch.
You will need your model information as well as the phone serial number.
Click to expand...
Click to collapse
Hi,
Thanks for the reply.
TWRP, tried wipe and few other options on twrp and all says failed.(as does odin now)
The weird thing is was all going fine till went to look for the zip files put onto phone before loading twrp which video said too, but when went to folder that SHOULD show all phones system/pic/video forlders and the 2 zip files I put on phone, it is all gone, folder and all folders showing empty. even internal memory showing as empty.
Magisk-v13 rooting instructions video was what I used.
Have just dl smart switch.
All this because fast charge wasn't working and battery drain fast. Guess thats why seller never sent me the quick charger kit and usb and just a wireless charger with old 0.7mah old samsung charger. 6-7H to charge.
Got another fastcharger but didnt work with the phone.
Just reading about smartswitch and seems can only use if can run from my s7 edge phone. but cant get back into phone.??
Dl it to pc and just tried to run it and yep, saying
app failed to start because its side by side config is incorrect???? Please see app event log to use the command line sxstrace.exe tool for more detail.
Sorry,
Now just more confused
Right,
Out of desperation I found a file, which to a useless tech head like me seemed to ring a bell being a md5 file and can with my odin download, so loaded it up and after 4 tries of
to catch the bootloop with pressing start and holding down and releasing the buttons on phone while starting odin with the file it worked and dl file onto phone, phone restarted after few minutes and then worried for a minute when just flashed the samsung logo, but RESULT. Loaded up, only to ask for pass code, put mine in and said wrong so tried the trick to get into bottloader system reset screen and reset to factory setting AND ALL Good again, just fresh start again.
So for anyone and future info/help the file that saved my AR*E was
cf-auto-root-hero2lte-hero2lte-smg935f.tar
So if need do a search guys or if ok can post a link to one on here if OK ?
imbloodyskintagain said:
Dl it to pc and just tried to run it and yep, saying
app failed to start because its side by side config is incorrect???? Please see app event log to use the command line sxstrace.exe tool for more detail.
Click to expand...
Click to collapse
Updating for future reference/help anyone gets same issue with smartswitch(windows 10)
Google came up with answer,
needed to dl and run.
2008 Microsoft Visual C++ Redistributable package(x86)
This fixed the smartswitch exe file not starting issue.
Hi guys. So I managed to locate what looks like the only mod out there for a G360G. A CF-Auto-Root image!
I downloaded the root mod and used Odin to successfully flash the images to my phone. I pulled the USB cable out and let it be. It vibrated a few times and I heard the message sound a while later. I plugged it into the computer and confirmed it was all working.
I then used AirDroid to examine the internal file system. I searched for SuperSU but I saw no sign of it. Is it in a protected area where I can't see? I also tried to AirMirror and it said it wasn't rooted.
Since my screen is blank and unresponsive I can't see anything on screen. So although the system works I don't know if any messages popped up telling me it detected a mod and erased it.
Are there any other steps that should be followed after the flash? Software to install before or after? I didn't see anything that said recovery mode needs to be booted or the phone needs turning off after for this particular model.
Just recieved my Joyeauto MMB Max Pro and was super excited as it seemed to have everything I wanted. I connected it to the car and all seemed perfect. Did some quick updates from google play, installed the normal apps for the box and all seemed great. I then turned the car off and back on about an hour later and it now turns on, plays the animation and then... NOTHING.. the UI won't load, can't swipe, can enter PIN, nada... My phone is connected to it and it will pass audio through the BT connection but that's it. Not good without the UI... I have messaged and emailed joyeauto with no help so I am hopeful someone from this community can help. Is there a way to manually reset as I can't get into the UI and perform a normal reset etc. Please Help!
Well, after sending the equivalent of 2 WhatsApp messages per day to Joyeeauto for the last week with no real progress, I am still stuck with a very expensive paperweight.
They have managed to tell me to grab the new ROM that can be uploaded using an SD, to which I told them to please read my messages where they would see I can not get to the OS.
Then, I managed to explain they needed to provide a link to an image I could use to apply from a computer, and FINALLY, last night they did... only to find out they provided no instructions as to how to get the device into bootloader mode to flash the ROM they sent. I am ready to go... I have SPFLASH set up, and I also have Phoenix Suite setup... both can't connect to the device because it is not going into bootloader mode etc...
Does anyone here have any idea how I might get it to go into debug / bootloader mode so SPFlash will see it as a device to flash the base image and reset it? I tried the push the reset button while connecting to the PC to no avail. It just stays in an initializing state.
If you are interested... Here are a few links
OTA Update to flash via SD Card
MMBMAX(MediaTek67655)_OTA_20220927.144.009
Base Image to Flash
CP Update for MMB Max Mediatek 6765
martinkwright said:
Well, after sending the equivalent of 2 WhatsApp messages per day to Joyeeauto for the last week with no real progress, I am still stuck with a very expensive paperweight.
They have managed to tell me to grab the new ROM that can be uploaded using an SD, to which I told them to please read my messages where they would see I can not get to the OS.
Then, I managed to explain they needed to provide a link to an image I could use to apply from a computer, and FINALLY, last night they did... only to find out they provided no instructions as to how to get the device into bootloader mode to flash the ROM they sent. I am ready to go... I have SPFLASH set up, and I also have Phoenix Suite setup... both can't connect to the device because it is not going into bootloader mode etc...
Does anyone here have any idea how I might get it to go into debug / bootloader mode so SPFlash will see it as a device to flash the base image and reset it? I tried the push the reset button while connecting to the PC to no avail. It just stays in an initializing state.
If you are interested... Here are a few links
OTA Update to flash via SD Card
MMBMAX(MediaTek67655)_OTA_20220927.144.009
Base Image to Flash
CP Update for MMB Max Mediatek 6765
Click to expand...
Click to collapse
Did you ever resolve your issue, I've got exactly the same problem?
The link for the Base Image Flash is also no longer valid :-(
I actually managed to get a very quick response from Joyeauto via WhatsApp and sent me all the files and instructions need to resolve this issue. I've attached all the files and instructions needed, you will just need the latest flash/bin file.
Also if any one finds this thread looking for Joyeauto MMB answers :
I had to manually enter my APN Settings for my SIM card before data would start flowing even though it shed signal strength and 4G connection
simon131 said:
Also if any one finds this thread looking for Joyeauto MMB answers :
I had to manually enter my APN Settings for my SIM card before data would start flowing even though it shed signal strength and 4G connection
Click to expand...
Click to collapse
Hello, I have the same product as you and I would like to know how to make calls with 4g sim card instead of connecting my phone in bt
simon131 said:
I actually managed to get a very quick response from Joyeauto via WhatsApp and sent me all the files and instructions need to resolve this issue. I've attached all the files and instructions needed, you will just need the latest flash/bin file.
Click to expand...
Click to collapse
Thanks for this! I will give it a shot.
simon131 said:
Also if any one finds this thread looking for Joyeauto MMB answers :
I had to manually enter my APN Settings for my SIM card before data would start flowing even though it shed signal strength and 4G connection
Click to expand...
Click to collapse
I know this is a old thread but I was having the same problem on the new mmb max bmw where the cell had no data. For me the apn was correct but the I noticed I was not get register on the network. Change from automatic to manual and register to TMobile and got data immediately. Hope this helps someone.
Hi guys my mmb max box is stuck on the animation screen and it wont load up any further. Before it stopped woking i went into engineering mode and activated settings to put a password on the device. When i switched off my car and put it back on the box wouldn't load past the animation .
Please can some one help?
Hi, guys! I have the similar box, but with bmw-oriented firmware. Did somebody root MMB MAX? I have an issue - voice commands are not recieving by the box. So I have bought usb type-c otg-cable with additional power connector and tried to switch input source of the box to external usb mic. Used Lesser Audioswitch app. But unsuccessfully. It cant switch source without root (there is modded app with root function).
By the way, I copied the ROM for my BMW version box (04.2023 fw) if someone got trouble as me (box could not connect to the car).