Related
Hi to all!! Here there is the best bluetooth manager I´ve seen for the XDA II. I´ve tried it and works well, but any problem wiht the one which comes with the Xdaii. Anyone can say anything about it???
My english is too bad... in spanish....
EEEE, he encontrado un gestor bluetooth que parece q esta mu bien, aunque da algún problema con el que viene x defecto al intentar activar los 2 a la vez. Permite establecer conexiones q no están nada mal comparadas con como era el anterior.
Por favor, si alguien conoce alguno que esté mejor, o en español, que lo haga saber en el foro, estaré pendiente.
Does anyone knows how to conect to the internet by a bluetooth conection to another pda with wifi?????
Thanks to all.
BYe.
the ms bluetooth stack in 2003 dont support PEN == bluetooth network
but if you have your pda connected to activesync using
bluetooth then your pda should have the same network connection as your pc have unless you disabled it[/list]
great tool!
does anybody know how to disable the built-in stack?
Got any screen shot or any more information regarding why this may be an improvement over what we already have before we blindly load this to try it out? Further insight much appreciated.
Regards - Mallow1
Hello
could you re- up the .tip-file please?
I`m going crazy trying to use Navigon on my Himalaya not getting the BT connection to the GPS Mouse to work!
I Tried:
- All WM 6.1's
- One WM 6.0 (still in use).
The "perfect" bluetooth manager always said there was insufficent driver memory for bluetooth radio. And he still sais that.
Few Months ago the Old Tomtom 6.032 was working perfectly on another Himalaya.
I'd thank you very much if you could re-up your stuff.
Regards
mEon
Dear All,
I had my samsung last month, everything was working fine, i was able to recieve files from bluetooth and send it. I think i messed up some blue tooth setting and from then i am un able to recieve any file from other bluetooth mobiles and PC and the message it shows is
"connecting with remote device failed"
However, i can send file from bluetooth to any mobile and PC. also, my mobile is getting detected from owner name, instead of device name.
Plzzz help, i will be gratefulll
Edit/Delete Message
Dear All,
I had my samsung last month, everything was working fine, i was able to recieve files from bluetooth and send it. I think i messed up some blue tooth setting and from then i am un able to recieve any file from other bluetooth mobiles and PC and the message it shows is
"connecting with remote device failed"
However, i can send file from bluetooth to any mobile and PC. also, my mobile is getting detected from owner name, instead of device name.
Plzzz help, i will be gratefulll
Edit/Delete Message
in settings-connections beam
click auto recieve incomming beams
beam is not an IR thing it's all incomming data requests
Hi
cans to upload again the blouetooth.zip please?
The link is empty.
Alpine blouetooth manager
Hi
cans to upload again the blouetooth.zip please?
The link is empty.
Hi community I don't have 3G neither Wifi on my office and I wish to share the Internet of my PC to my Android. Is this possible?
I have the choice of share the Internet from Android to PC via Usb, but i want the opposite. Note: "Sorry for my English"
--------------------------------------------------------------------------
Que tal comunidad, No tengo 3G ni Wifi en mi oficina y quisiera compartir el internet de mi PC hacia mi Android. Es esto posible?
Tengo la opción de compartir el Internet desde android hacia la pc via Usb pero lo que busco es lo contrario.
i would like to know too!
Never mind missread the question
any update on this? i'd really like to know too. i was wondering if there is anyway to do it via HTC Sync...
May be some windows program could do this. Please some smart guy at XDA help us.
Up Please!!
Does this help anyone?
http://forum.koolu.org/viewtopic.php?f=10&t=89
http://androidforums.com/g1-support...-between-android-my-pc-through-usb-cable.html
http://modmymobile.com/forums/491-root-access/544146-connect-g1-ad-hoc-network-solved.html
The first two links doesn't works and the third is for Wifi.
What we want do do is USB reverse theatering !
Nobody knows how to do that ?
Strange, all links work for me. I appreciate what you WANT is tethering I was offering an alternative as this hasn't yet been resolved.
This worked for me.
http://forum.xda-developers.com/showthread.php?p=11016548#post11016548
I search too.
I used this,
http://forum.xda-developers.com/showthread.php?t=481454&page=2
See the post by Brock Samson
when i rooted my g2 and was running sense i could have done this...it was called internet passthrough...everytime i plug my phone via usb it bought up the option of internet passthrough,sdcard mount and so on..i choose internet passthrough
Please I need it urgently, my signal damage and do not have it either for Odin, Either would serve me, or firmware or odin
Y511 Firmware
Anfesango said:
Please I need it urgently, my signal damage and do not have it either for Odin, Either would serve me, or firmware or odin
Click to expand...
Click to collapse
I also need his Y511 firmware, right now the only firmware I can find is the China Mobile (this doent work in Colombia because China Mobile doesn´t use WCDMA) or the China Unicom firmware (this works in Clombia), but both are Chinese so they dont have any google application, not even the play store and I tried hard and couldnot install google apps.
You find those Y511 firmware (I can not post links, sorry):
China Mobile does not have WCDMA, only sd-CDMA
En español: Yo he buscado mucho el firmware para el Y511, el único que encuentro es el Chino, que se puede poner en ingles pero no trae nada de Google y me ha sido imposible instalar los productos de Google (Gapps), yo no lo usaría. De los 2 links, el de Cina Unicom es el único que funciona en Colombia. Si lo encuentra avíseme!
huawei y511
Why is there no specific page for this device huawei y511?
y511 firmware flash
noamanahmed said:
Why is there no specific page for this device huawei y511?
Click to expand...
Click to collapse
you try the russian y511-u30... it's very functional... though it might be for dual-sim y511, it functions just as good, if not much better.
i am not able to put the link because i am prevented by the admin to post it... just google "huawei y511-u30 flash firmware"...
The Russian upgrade works
mattm3t said:
you try the russian y511-u30... it's very functional... though it might be for dual-sim y511, it functions just as good, if not much better.
i am not able to put the link because i am prevented by the admin to post it... just google "huawei y511-u30 flash firmware"...
Click to expand...
Click to collapse
Hey you are right, the Russian upgrade works! I went to huaweidevice russia, searched Y511, downloaded the firmware, put it in dload folder in the SD card and used the SD card upgrade that is in the settings of the phone, thats all. Phone upgraded and no more chinese apps!
Camilo
bikebogota said:
Hey you are right, the Russian upgrade works! I went to huaweidevice russia, searched Y511, downloaded the firmware, put it in dload folder in the SD card and used the SD card upgrade that is in the settings of the phone, thats all. Phone upgraded and no more chinese apps!
Camilo
Click to expand...
Click to collapse
congratulations, that's so nice to hear. i want to add some info that you can remove the russian language too if you will root your y511.. only english will remain.
I need latest microwear l5 firmware.. I tried contacting microwear through [email protected].. But they don't reply, it has been more than aa month.. No update coming through Fundo Pro app.. Please someone give me the firmware if you can.
Thank you
Issue l5 update
Sadman007 said:
I need latest microwear l5 firmware.. I tried contacting microwear through [email protected].. But they don't reply, it has been more than aa month.. No update coming through Fundo Pro app.. Please someone give me the firmware if you can.
Thank you
Click to expand...
Click to collapse
I have the same problem my watch is stuck in 0.0.4 version
floplop said:
I have the same problem my watch is stuck in 0.0.4 version
Click to expand...
Click to collapse
if I have the firmware file than I could have installed the firmware manually with nrf connect app
floplop said:
I have the same problem my watch is stuck in 0.0.4 version
Click to expand...
Click to collapse
contact me I managed to manually upgrade
did you have the firmware?
andimachrif said:
did you have the firmware?
Click to expand...
Click to collapse
Yes I have the firmware file which can be manually flashed by the nrf connect app from play store
Hello,
My watch stands in dfu mode after upgrading a firmware that not worked.
Can someone send me a firmware a the way to flash it manually ?
Thanks
Envoyé de mon Pixel 3 XL en utilisant Tapatalk
Sadman007 said:
Yes I have the firmware file which can be manually flashed by the nrf connect app from play store
Click to expand...
Click to collapse
Can I ask you to submit a firmware file? When updating by Fundo application the smartwatch died.
Could you tell us where to get the firmware file?
---------- Post added at 07:03 PM ---------- Previous post was at 07:00 PM ----------
I think that when we ask for help, it is so that they can provide us with a solution, and not to indicate that they have solved it and not to share the file or the solution, it is not ethical; not in this thread but in everyone. Thank you
Solución al error de actualización del firmware del MicroWear L5
Si te dio error al actualizar el firmware desde el fundo, instala nrf connect ejecuta y busca el dispositivo dfutarg, pulsa en Connect y luego la opción dfu, software packet Zip, busca en tu móvil en la memoria interna la carpeta fundo\frw y verás un archivo fundo.zip y enviar, a esperar y suerte.
jeyviman said:
Si te dio error al actualizar el firmware desde el fundo, instala nrf connect ejecuta y busca el dispositivo dfutarg, pulsa en Connect y luego la opción dfu, software packet Zip, busca en tu móvil en la memoria interna la carpeta fundo\frw y verás un archivo fundo.zip y enviar, a esperar y suerte.
Click to expand...
Click to collapse
Thank you very much.
Worked fine for me.
Sadman007 said:
contact me I managed to manually upgrade
Click to expand...
Click to collapse
Pm sent
Hi, Could soumebody say me where can i found : fundo\frw fundo.zip ?
Hello, I also have a Microwear L5 but with version 0.0.6.
Is there a newer one? if yes can someone help me please?
Thank u in advance.
Newer version
etimarques said:
Hello, I also have a Microwear L5 but with version 0.0.6.
Is there a newer one? if yes can someone help me please?
Thank u in advance.
Click to expand...
Click to collapse
Hi etimarques,
The latest firmware is v0.1.2 now. If you install the newest FunDo Pro app from Google Play, you can look for the newest firmware from this app and install it. It stores in the Fundo.zip file, what is mentioned above.
I don't know, whether in your case the titles in the smart watch for every page appear in English or Chinese. I had v0.0.6 firmware when I've bought it, and that time the titles appeared in English. After upgrading the firmware, they became Chinese. Update only if this is fine for you.
P.S.: If you have the v0.0.6 firmware, and the titles are English, could you upload your firmware? I would prefer those titles in English.
Hello..
Is it possible to have the firmware..
I am facing the same problem..
Thanks in advance..
Hello jest w stanie pomóc mi, mój l5 po aktualizacji umarł. Proszę o podanie jego po kolei mam wgrać oprogramowanie.
Sadman007 said:
Yes I have the firmware file which can be manually flashed by the nrf connect app from play store
Click to expand...
Click to collapse
can u please send me this file with firmware?
Old firmware
Hi all,
Not sure if i'm too late on this.
When I first got my L5 9-12months ago or so, it came with 0.0.6 and I got about 6weeks of use for the first three charges.
I updated to 0.1.2 (later to 0.1.3) but I can still consistently only get about a week from a charge now.
I highly doubt this is battery related, as it came exactly as I updated -and after a few months of use prior.
Can anyone PM me the original firmware 0.0.6 if they still have it, or a link to where I can find it pls?
I'm seeing a lot of "i have it", so I'm hoping someone still does.
I'd just like to rule the firmware out of the equation.
Thanks all.
Hello people!! I recently purchased this "Chinese" smartwach. I don't know if it's a "KIWITIME" or a copy. The idea of the POST is to see if someone has already seen how to create WATCHFACE for this model / CPU. I have the files that are sent by OTA to the smartwach. I leave them attached in case someone wants to investigate. Attachment FIRMWARE (.zip) and 2 WATCHFACE (.bin)
========================================
Hola Gente!!
Hace poco adquirí este smartwach "chino". No se si es un "KIWITIME" o copia.
La idea del POST es ver si alguien ya estuvo viendo como crear WATCHFACE para este modelo/CPU.
Yo tengo los archivos que se envian por OTA al smartwach. Los dejo adjunto por si alguien quiere investigar.
Adjunto FIRMWARE (.zip) y 2 WATCHFACE (.bin)
My form is Argentina. Translated with google.
Best Regards!
Hello friends..i recently bought this watch w37 watch 7..
and i need to have a different watch face which is nt available in the wearfit pro app.. can any of u help me .. is their any way to install new face to the dial ??
bushra87 said:
Hello friends..i recently bought this watch w37 watch 7..
and i need to have a different watch face which is nt available in the wearfit pro app.. can any of u help me .. is their any way to install new face to the dial ??
Click to expand...
Click to collapse
Hi bushra87!!!
I need same, that's why I create this post.
To see if anyone can decript the files or helpme to do somethings. PD. The APP "WearFir Pro" is to bad.
Regards!
oscaredu said:
Hi bushra87!!!
I need same, that's why I create this post.
To see if anyone can decript the files or helpme to do somethings. PD. The APP "WearFir Pro" is to bad.
Regards!
Click to expand...
Click to collapse
They have certain quite limited watch faces.. but their should be a option to directly sync with other apps so we can get the freedom to install any kind of face .. in want the analog micky mouse face with hands moving.. i dont knw how and where to get it ..
I'm also wanting to switch to other faces outside the official store, I downloaded some .bin faces from the internet, example, Xioami Bip and GTS2 mini, I renamed the file in the Ota folder and replaced and unfortunately it didn't work, do you have any suggestions for another smartwatch we could try ?
i found out that smartwatch hw12, hw16 use the same Wearfit Pro software these smartwatch versions have much more watch faces, if someone can get the .bin files we could share between wide smartwatch
i bought w27 pro hs6621 and nfc possibilities, december 2021 release model . 320x390pix , 1.81 " screen ,and black steel . ip68
, same with fitcloudpro software, i receive it 20 jan 2022
W27 PRO dec 2021 link
i see soon, how to do "advanced changes" i love new sistem to explore etc... if i can help too
i'm french and spanish, not bad i hope in english
I have hw22 plus and I tried to download the watch faces that you posted and one of them is not supported or the store doesn't appear it to me to download but I renamed the .bin file and it worked and downloaded successfully so pls share more watch faces that you have and I'll do this too in this thread to you guys
And if anyone has watch faces from wearfit pro pls attach it here
And please if anyone have this watch faces please upload them
I think on w37 pro
Download link for all free W37 Pro Watch Faces available on the Wearfit pro app date 12/31/21 - https://1drv.ms/u/s!Aq2VSRNsTzQJk03Vvi6Cw4F4gjy1?e=aeur4E
can we convert faces , from watchmaker app .? , there is a beautiful bugatti engine faces animated.., i show u --->
https://getwatchmaker.com/watchface/jc-bugatti-chiron
i think u can synch too with fitcloudpro app (hs6621) , there is lot of faces in this app, i dont have received my watch yet, so u can test it, to have their faces. my w27 pro, comes with fitcloudpro
I'm preparing the file of my watch faces but I have noticed something that unfortunately not all w37 watch faces work on my watch, some of them make the watch flash several times then the watch work back but without the watch face but I will upload the files of my all watch faces tomorrow or after tomorrow to make you try too and if any of you have a solution for this problem please tell us
TiuMoki said:
Acho que você também pode sincronizar com o aplicativo fitcloudpro (hs6621), há muitos rostos neste aplicativo, ainda não recebi meu relógio, então você pode testá-lo, para ter seus rostos
Click to expand...
Click to collapse
Tentei usar outro aplicativo, mas não foi possível que eles não conectassem, se alguém puder nos avisar
Download link for all free HW22 Plus (HS6621) Watch Faces available on the Wearfit pro app date 03/01/22 -
*You will find some surprises
hw22 plus watch faces.zip
Compressed (zipped) Folder
1drv.ms
MizoEmad said:
Download link for all free HW22 Plus (HS6621) Watch Faces available on the Wearfit pro app date 03/01/22 -
*You will find some surprises
hw22 plus watch faces.zip
Compressed (zipped) Folder
1drv.ms
Click to expand...
Click to collapse
Thanks @MizoEmad I already tested several smartwatch you ordered on my w37 pro AND IT WORKED PERFECTLY, now we need people with other smartwatch example hw12, hw16 to contribute to us
juS2di said:
Thanks @MizoEmad I already tested several smartwatch you ordered on my w37 pro AND IT WORKED PERFECTLY, now we need people with other smartwatch example hw12, hw16 to contribute to us
Click to expand...
Click to collapse
Your Welcome
I think hw12 and hw16 have the same watch faces of hw22 and hw22 plus and hw57, we need someone has hw37 or x7 pro, they have a new watch faces
I need to ask you something, how you exported the files of watch firmware and have you any idea how we can install it in the watch ?
great let's go after these smartwatch, I'll try to explain how to export the new files, if you don't understand you can ask again.
1 - Download any smartface from Wearfit Pro app.
2 - Connect the Smartphone to the Computer or access the root folders via an explorer (the purpose here is to enter the Wearfit Pro application folders)
3 - Browse to Android / data / com.wakeup.howear / files / Download / ota - inside this folder contains the downloaded app displays
4 - Now just replace the file and rename it with the same name as the one you downloaded
5 - Right after I return to the Wearfit Pro application and have the same smartface installed that I had downloaded and replaced with the new file - so the application will get confused and install the new file.
*note: do not forget replace and rename with the same name.
juS2di said:
great let's go after these smartwatch, I'll try to explain how to export the new files, if you don't understand you can ask again.
1 - Download any smartface from Wearfit Pro app.
2 - Connect the Smartphone to the Computer or access the root folders via an explorer (the purpose here is to enter the Wearfit Pro application folders)
3 - Browse to Android / data / com.wakeup.howear / files / Download / ota - inside this folder contains the downloaded app displays
4 - Now just replace the file and rename it with the same name as the one you downloaded
5 - Right after I return to the Wearfit Pro application and have the same smartface installed that I had downloaded and replaced with the new file - so the application will get confused and install the new file.
*note: do not replace and rename scheme with the same name.
Click to expand...
Click to collapse
I think you I think you misunderstood my question, I was asking about the watch software itself ( the software or firmware of the watch itself ) not the watch face files
MizoEmad said:
Eu acho que você Acho que você entendeu mal a minha pergunta, eu estava perguntando sobre o software do relógio em si (o software ou firmware do próprio relógio), não os arquivos do mostrador do relógio
Click to expand...
Click to collapse
Now I get it, so the firmware was inside the Ota folder, but honestly I don't know if the file will help us, do you have any suggestions?