Database Users

Bluetooth manager XDA II

Hi to all!! Here there is the best bluetooth manager I´ve seen for the XDA II. I´ve tried it and works well, but any problem wiht the one which comes with the Xdaii. Anyone can say anything about it???
My english is too bad... in spanish....
EEEE, he encontrado un gestor bluetooth que parece q esta mu bien, aunque da algún problema con el que viene x defecto al intentar activar los 2 a la vez. Permite establecer conexiones q no están nada mal comparadas con como era el anterior.
Por favor, si alguien conoce alguno que esté mejor, o en español, que lo haga saber en el foro, estaré pendiente.
Does anyone knows how to conect to the internet by a bluetooth conection to another pda with wifi?????
Thanks to all.
BYe.

the ms bluetooth stack in 2003 dont support PEN == bluetooth network
but if you have your pda connected to activesync using
bluetooth then your pda should have the same network connection as your pc have unless you disabled it[/list]

great tool!
does anybody know how to disable the built-in stack?

Got any screen shot or any more information regarding why this may be an improvement over what we already have before we blindly load this to try it out? Further insight much appreciated.
Regards - Mallow1

Hello
could you re- up the .tip-file please?
I`m going crazy trying to use Navigon on my Himalaya not getting the BT connection to the GPS Mouse to work!
I Tried:
- All WM 6.1's
- One WM 6.0 (still in use).
The "perfect" bluetooth manager always said there was insufficent driver memory for bluetooth radio. And he still sais that.
Few Months ago the Old Tomtom 6.032 was working perfectly on another Himalaya.
I'd thank you very much if you could re-up your stuff.
Regards
mEon

Dear All,
I had my samsung last month, everything was working fine, i was able to recieve files from bluetooth and send it. I think i messed up some blue tooth setting and from then i am un able to recieve any file from other bluetooth mobiles and PC and the message it shows is
"connecting with remote device failed"
However, i can send file from bluetooth to any mobile and PC. also, my mobile is getting detected from owner name, instead of device name.
Plzzz help, i will be gratefulll
Edit/Delete Message

Dear All,
I had my samsung last month, everything was working fine, i was able to recieve files from bluetooth and send it. I think i messed up some blue tooth setting and from then i am un able to recieve any file from other bluetooth mobiles and PC and the message it shows is
"connecting with remote device failed"
However, i can send file from bluetooth to any mobile and PC. also, my mobile is getting detected from owner name, instead of device name.
Plzzz help, i will be gratefulll
Edit/Delete Message

in settings-connections beam
click auto recieve incomming beams
beam is not an IR thing it's all incomming data requests

Hi
cans to upload again the blouetooth.zip please?
The link is empty.

Alpine blouetooth manager
Hi
cans to upload again the blouetooth.zip please?
The link is empty.

help please! my xperia x2 is dead :(

hi everyone i come from chile and my english is not good enough . sorry about that i hope you understand my problem :
i was updating my phone to the last version by SEUS , when the aplication downloaded the update and started to install the new rom in my cellphone i didnt see my usb cable then i kicked it and i lost the usb movil-pc conecction so, the installacion was interrupted in the the beggining when the green bar was getting up now my xperia x2 is death it didnt do anything, when a press power buttom it only make a litle vibration and nothing else it could possible my xperia doesnt have a OS right now ? my xperia dont even load the SE logo with the whit screen

andres27 said:
hi everyone i come from chile and my english is not good enough . sorry about that i hope you understand my problem :
i was updating my phone to the last version by SEUS , when the aplication downloaded the update and started to install the new rom in my cellphone i didnt see my usb cable then i kicked it and i lost the usb movil-pc conecction so, the installacion was interrupted in the the beggining when the green bar was getting up now my xperia x2 is death it didnt do anything, when a press power buttom it only make a litle vibration and nothing else it could possible my xperia doesnt have a OS right now ? my xperia dont even load the SE logo with the whit screen
Click to expand...
Click to collapse
Hola
1) Sacale la batería
2) Vuelve a colocarla
3) Manten presionado el botón de bajar volumen y vuelve a presionar el botón de encendido, manteniendo presionado el botón de encendido hasta que salga el logo de SE con el fondo blanco
4) Si aparece, puedes volver a intentar flashear con SEUS. Si no, me temo que ladrilleaste tu X2. Lo siento.
Saludos.

Jolo_ said:
Hola
1) Sacale la batería
2) Vuelve a colocarla
3) Manten presionado el botón de bajar volumen y vuelve a presionar el botón de encendido, manteniendo presionado el botón de encendido hasta que salga el logo de SE con el fondo blanco
4) Si aparece, puedes volver a intentar flashear con SEUS. Si no, me temo que ladrilleaste tu X2. Lo siento.
Saludos.
Click to expand...
Click to collapse
i already do that several times my friend and it's useless...i wonder if sony ericsson has suport in chile...since i bought my x2 in ebay usa

does anyone else know anything about it? even if one of us has a similar problem with the x1 could be helpful for me

andres27 said:
hi everyone i come from chile and my english is not good enough . sorry about that i hope you understand my problem :
i was updating my phone to the last version by SEUS , when the aplication downloaded the update and started to install the new rom in my cellphone i didnt see my usb cable then i kicked it and i lost the usb movil-pc conecction so, the installacion was interrupted in the the beggining when the green bar was getting up now my xperia x2 is death it didnt do anything, when a press power buttom it only make a litle vibration and nothing else it could possible my xperia doesnt have a OS right now ? my xperia dont even load the SE logo with the whit screen
Click to expand...
Click to collapse
I feel your pain! The exact same thing happened to me. There was nothing I could do but to send the phone for repair/exchange.
I have written about this in another thread here. You can not "Hard reset" the phone from the state your telephone is now as you eventually could have done with a X1 with its soft buttons. Obviously the service centre I sent my phone to couldn't do anything either since they today actually decided to exchange my phone. I guess they must have tried to kick some life back into it since they had it for a week. Prepare for yet a couple of weeks more without your precious
GL,A.D

i see, the problem is i dont have any guaranty from S.E i've bought my x2 from a chilean guy who bought the phone in ebay so that phone was "double-sold" i dont know how say it, there's no sony ericcson support in chile so i dont know who can fixed it , i wonder if the x2 hard-spl could be the great solution, off course ..if would exist....

Damn, that is a very bad mistake.
That is why thy caution you to make sure your phone is in a safe/stable place whilst it is updating and not to move it.
I hope you are able to get it sorted out soon. Good Luck!

lol, i about to cry guys i need my x2 back, i have faith it could be fixed, after all i've paid a lot of money for it

andres27 said:
lol, i about to cry guys i need my x2 back, i have faith it could be fixed, after all i've paid a lot of money for it
Click to expand...
Click to collapse
You have to check if SonyEricsson has global warranty, which i guess they do and start figuring out to what country you could send it to for service. A problem here is i guess you don't have the original receipt but on the other hand the phone hasn't been sold so long it can be outside warranty time. You're gonna have to phone or email SE support abroad to start with to see what options you have.

UPDATE A PROBLEM INSTALLING 2.3.4 WebTop TELCEL ATRIX

hello
I have a problem in my motorola Atrix, buy it with the company Telcel in Mexico, upgrade to version 2.3.4 with the system 45.0.7.MB860.ORANGE.EN.FR WITH 2.6.32.9 kernel version.
the situation is as follows.
when updating the manual for Atrix of Mexico that is on the next page. is in Spanish.
w w w . jorgevenegas.com/2011/08/actualizar-motorola-atrix-de-telcel-de
unlock the file start-lite.sbf zomgunlock
throw me an error .... could not run
use file-intl-fix and it worked try1.sbf
Unlocked cell correctly
Carry out the installation of the system with the following tutorial
w w w .jorgevenegas.com/2011/08/actualizar-motorola-atrix-de-telcel-de_02
install the new 2.3.4. everything correctly.
when trying to install webtop (weptop.img) threw me the following error
"load_file: could not allocate 805306368 bytes error: can not load webtop.img"
I can not install the webtop
I have updated the system but does not start webtop that I have not installed webtop.img
sorry for my English, but use a translator to help
I hope I can help ..

EN: Are you using the 'moto-fastboot'?
--
SP: Estás usando el 'moto-fastboot', cierto?

So you cant install webtop?
I can help you in spanish...email me and/or gtalk at [email protected]
Sent from my OC'd Motorola™ Atrix®

turl1 said:
EN: Are you using the 'moto-fastboot'?
--
SP: Estás usando el 'moto-fastboot', cierto?
Click to expand...
Click to collapse
hello
yes

Aqui yo lo logre!
w w w. underground . o r g . m x/index.php?topic=27287.msg139955#msg139955
Saludos

Im not have Webtop too T.T
Sorry just wanted to know if they could help me because I am in the same situation, just follow the tutorial and achieve Jorge Venegas French ROM install 2.3.4 and my Atrix works great, the only detail is the WebTop that gives me the TT will be no charge option or any way you could use it and set it again?? thanks
Disculpen solo queria saber si podrian ayudarme dado que estoy en la misma situacion, igual segui el tutorial de Jorge Venegas y logre instalar la ROM francesa 2.3.4 y mi Atrix funciona de maravilla; el unico detalle es con el WEBTOP que no me da la opcion ni carga T.T habra alguna forma de poder usarlo y configurarlo de nuevo ??? gracias

Stop following that guys blog.... lots of mexican atrix users with problems.
I followed guides here at xda and my phone is fully functional.
Sent from my OC'd Motorola™ Atrix®

misho52 said:
Sorry just wanted to know if they could help me because I am in the same situation, just follow the tutorial and achieve Jorge Venegas French ROM install 2.3.4 and my Atrix works great, the only detail is the WebTop that gives me the TT will be no charge option or any way you could use it and set it again?? thanks
Disculpen solo queria saber si podrian ayudarme dado que estoy en la misma situacion, igual segui el tutorial de Jorge Venegas y logre instalar la ROM francesa 2.3.4 y mi Atrix funciona de maravilla; el unico detalle es con el WEBTOP que no me da la opcion ni carga T.T habra alguna forma de poder usarlo y configurarlo de nuevo ??? gracias
Click to expand...
Click to collapse
Flash Joes Webtop. Same I told ianus.
Sent from my OC'd Motorola™ Atrix®

Yep, proceed exactly as found in the dev´s forum (from XDA obviously). I highly recommend the full BELL 2.3.4 Atrix over the leaked Orange France. Been using it from a while and everything is just fine.
Look for Bell Atrix 2.3.4 Gobstopper, from NFHimself. Good luck!
---------- Post added at 08:29 AM ---------- Previous post was at 07:52 AM ----------
Hey, me again! Well bud, if you are interested I wrote a post some time ago about what I mentioned just above, of course those are posts from real dev´s, which I thank a lot! (Credits go for them as always. NFHimselh and Eval, and so on...!) And thought this could be for help for you.
I´ve added, as you´ll realise, some own mods to procedures due to lost capabilities, howewer, after sorting those as directed, you´ll have, as stated, a very very reliable and full-functional Mexican Atrix.
This is the link to the post, cheers! God bless my beloved tequilita, mmmm!!!!
http://forum.xda-developers.com/showpost.php?p=17617098&postcount=150

Niiiceee.
Sent from my OC'd Motorola™ Atrix®

titusxperia10 said:
Yep, proceed exactly as found in the dev´s forum (from XDA obviously). I highly recommend the full BELL 2.3.4 Atrix over the leaked Orange France. Been using it from a while and everything is just fine.
Look for Bell Atrix 2.3.4 Gobstopper, from NFHimself. Good luck!
---------- Post added at 08:29 AM ---------- Previous post was at 07:52 AM ----------
Hey, me again! Well bud, if you are interested I wrote a post some time ago about what I mentioned just above, of course those are posts from real dev´s, which I thank a lot! (Credits go for them as always. NFHimselh and Eval, and so on...!) And thought this could be for help for you.
I´ve added, as you´ll realise, some own mods to procedures due to lost capabilities, howewer, after sorting those as directed, you´ll have, as stated, a very very reliable and full-functional Mexican Atrix.
This is the link to the post, cheers! God bless my beloved tequilita, mmmm!!!!
http://forum.xda-developers.com/showpost.php?p=17617098&postcount=150
Click to expand...
Click to collapse
i used the tutorials in here, used a zip file for flashing to the att 4.5.91 with 2.3.4 , but i get no webtop option in the popup, any ideas?
(entertainment center works fine if i select it)
and i got no errors during flashing the zip file

Any update on this i have the same problem i can install the webtop by moto-fastboot but when i connect the cellphone to the dock it did not show the popup asking me for webtop or multimedia center i have only put as a clock option
Thanks for your help

carlos20h said:
Any update on this i have the same problem i can install the webtop by moto-fastboot but when i connect the cellphone to the dock it did not show the popup asking me for webtop or multimedia center i have only put as a clock option
Thanks for your help
Click to expand...
Click to collapse
i solved this using the first post instrucctions on this link
http://forum.xda-developers.com/showthread.php?t=1144119

[Q] Firmware for Huawei Y511 (Claro Colombia)

Please I need it urgently, my signal damage and do not have it either for Odin, Either would serve me, or firmware or odin

Y511 Firmware
Anfesango said:
Please I need it urgently, my signal damage and do not have it either for Odin, Either would serve me, or firmware or odin
Click to expand...
Click to collapse
I also need his Y511 firmware, right now the only firmware I can find is the China Mobile (this doent work in Colombia because China Mobile doesn´t use WCDMA) or the China Unicom firmware (this works in Clombia), but both are Chinese so they dont have any google application, not even the play store and I tried hard and couldnot install google apps.
You find those Y511 firmware (I can not post links, sorry):
China Mobile does not have WCDMA, only sd-CDMA
En español: Yo he buscado mucho el firmware para el Y511, el único que encuentro es el Chino, que se puede poner en ingles pero no trae nada de Google y me ha sido imposible instalar los productos de Google (Gapps), yo no lo usaría. De los 2 links, el de Cina Unicom es el único que funciona en Colombia. Si lo encuentra avíseme!

huawei y511
Why is there no specific page for this device huawei y511?

y511 firmware flash
noamanahmed said:
Why is there no specific page for this device huawei y511?
Click to expand...
Click to collapse
you try the russian y511-u30... it's very functional... though it might be for dual-sim y511, it functions just as good, if not much better.
i am not able to put the link because i am prevented by the admin to post it... just google "huawei y511-u30 flash firmware"...

The Russian upgrade works
mattm3t said:
you try the russian y511-u30... it's very functional... though it might be for dual-sim y511, it functions just as good, if not much better.
i am not able to put the link because i am prevented by the admin to post it... just google "huawei y511-u30 flash firmware"...
Click to expand...
Click to collapse
Hey you are right, the Russian upgrade works! I went to huaweidevice russia, searched Y511, downloaded the firmware, put it in dload folder in the SD card and used the SD card upgrade that is in the settings of the phone, thats all. Phone upgraded and no more chinese apps!
Camilo

bikebogota said:
Hey you are right, the Russian upgrade works! I went to huaweidevice russia, searched Y511, downloaded the firmware, put it in dload folder in the SD card and used the SD card upgrade that is in the settings of the phone, thats all. Phone upgraded and no more chinese apps!
Camilo
Click to expand...
Click to collapse
congratulations, that's so nice to hear. i want to add some info that you can remove the russian language too if you will root your y511.. only english will remain.

Need Microwear L5 firmware

I need latest microwear l5 firmware.. I tried contacting microwear through [email protected].. But they don't reply, it has been more than aa month.. No update coming through Fundo Pro app.. Please someone give me the firmware if you can.
Thank you

Issue l5 update
Sadman007 said:
I need latest microwear l5 firmware.. I tried contacting microwear through [email protected].. But they don't reply, it has been more than aa month.. No update coming through Fundo Pro app.. Please someone give me the firmware if you can.
Thank you
Click to expand...
Click to collapse
I have the same problem my watch is stuck in 0.0.4 version

floplop said:
I have the same problem my watch is stuck in 0.0.4 version
Click to expand...
Click to collapse
if I have the firmware file than I could have installed the firmware manually with nrf connect app

floplop said:
I have the same problem my watch is stuck in 0.0.4 version
Click to expand...
Click to collapse
contact me I managed to manually upgrade

did you have the firmware?

andimachrif said:
did you have the firmware?
Click to expand...
Click to collapse
Yes I have the firmware file which can be manually flashed by the nrf connect app from play store

Hello,
My watch stands in dfu mode after upgrading a firmware that not worked.
Can someone send me a firmware a the way to flash it manually ?
Thanks
Envoyé de mon Pixel 3 XL en utilisant Tapatalk

Sadman007 said:
Yes I have the firmware file which can be manually flashed by the nrf connect app from play store
Click to expand...
Click to collapse
Can I ask you to submit a firmware file? When updating by Fundo application the smartwatch died.

Could you tell us where to get the firmware file?
---------- Post added at 07:03 PM ---------- Previous post was at 07:00 PM ----------
I think that when we ask for help, it is so that they can provide us with a solution, and not to indicate that they have solved it and not to share the file or the solution, it is not ethical; not in this thread but in everyone. Thank you

Solución al error de actualización del firmware del MicroWear L5
Si te dio error al actualizar el firmware desde el fundo, instala nrf connect ejecuta y busca el dispositivo dfutarg, pulsa en Connect y luego la opción dfu, software packet Zip, busca en tu móvil en la memoria interna la carpeta fundo\frw y verás un archivo fundo.zip y enviar, a esperar y suerte.

jeyviman said:
Si te dio error al actualizar el firmware desde el fundo, instala nrf connect ejecuta y busca el dispositivo dfutarg, pulsa en Connect y luego la opción dfu, software packet Zip, busca en tu móvil en la memoria interna la carpeta fundo\frw y verás un archivo fundo.zip y enviar, a esperar y suerte.
Click to expand...
Click to collapse
Thank you very much.
Worked fine for me.

Sadman007 said:
contact me I managed to manually upgrade
Click to expand...
Click to collapse
Pm sent

Hi, Could soumebody say me where can i found : fundo\frw fundo.zip ?

Hello, I also have a Microwear L5 but with version 0.0.6.
Is there a newer one? if yes can someone help me please?
Thank u in advance.

Newer version
etimarques said:
Hello, I also have a Microwear L5 but with version 0.0.6.
Is there a newer one? if yes can someone help me please?
Thank u in advance.
Click to expand...
Click to collapse
Hi etimarques,
The latest firmware is v0.1.2 now. If you install the newest FunDo Pro app from Google Play, you can look for the newest firmware from this app and install it. It stores in the Fundo.zip file, what is mentioned above.
I don't know, whether in your case the titles in the smart watch for every page appear in English or Chinese. I had v0.0.6 firmware when I've bought it, and that time the titles appeared in English. After upgrading the firmware, they became Chinese. Update only if this is fine for you.
P.S.: If you have the v0.0.6 firmware, and the titles are English, could you upload your firmware? I would prefer those titles in English.

Hello..
Is it possible to have the firmware..
I am facing the same problem..
Thanks in advance..

Hello jest w stanie pomóc mi, mój l5 po aktualizacji umarł. Proszę o podanie jego po kolei mam wgrać oprogramowanie.

Sadman007 said:
Yes I have the firmware file which can be manually flashed by the nrf connect app from play store
Click to expand...
Click to collapse
can u please send me this file with firmware?

Old firmware
Hi all,
Not sure if i'm too late on this.
When I first got my L5 9-12months ago or so, it came with 0.0.6 and I got about 6weeks of use for the first three charges.
I updated to 0.1.2 (later to 0.1.3) but I can still consistently only get about a week from a charge now.
I highly doubt this is battery related, as it came exactly as I updated -and after a few months of use prior.
Can anyone PM me the original firmware 0.0.6 if they still have it, or a link to where I can find it pls?
I'm seeing a lot of "i have it", so I'm hoping someone still does.
I'd just like to rule the firmware out of the equation.
Thanks all.