Bluetooth manager XDA II - MDA II, XDA II, 2060 General

Hi to all!! Here there is the best bluetooth manager I´ve seen for the XDA II. I´ve tried it and works well, but any problem wiht the one which comes with the Xdaii. Anyone can say anything about it???
My english is too bad... in spanish....
EEEE, he encontrado un gestor bluetooth que parece q esta mu bien, aunque da algún problema con el que viene x defecto al intentar activar los 2 a la vez. Permite establecer conexiones q no están nada mal comparadas con como era el anterior.
Por favor, si alguien conoce alguno que esté mejor, o en español, que lo haga saber en el foro, estaré pendiente.
Does anyone knows how to conect to the internet by a bluetooth conection to another pda with wifi?????
Thanks to all.
BYe.

the ms bluetooth stack in 2003 dont support PEN == bluetooth network
but if you have your pda connected to activesync using
bluetooth then your pda should have the same network connection as your pc have unless you disabled it[/list]

great tool!
does anybody know how to disable the built-in stack?

Got any screen shot or any more information regarding why this may be an improvement over what we already have before we blindly load this to try it out? Further insight much appreciated.
Regards - Mallow1

Hello
could you re- up the .tip-file please?
I`m going crazy trying to use Navigon on my Himalaya not getting the BT connection to the GPS Mouse to work!
I Tried:
- All WM 6.1's
- One WM 6.0 (still in use).
The "perfect" bluetooth manager always said there was insufficent driver memory for bluetooth radio. And he still sais that.
Few Months ago the Old Tomtom 6.032 was working perfectly on another Himalaya.
I'd thank you very much if you could re-up your stuff.
Regards
mEon

Dear All,
I had my samsung last month, everything was working fine, i was able to recieve files from bluetooth and send it. I think i messed up some blue tooth setting and from then i am un able to recieve any file from other bluetooth mobiles and PC and the message it shows is
"connecting with remote device failed"
However, i can send file from bluetooth to any mobile and PC. also, my mobile is getting detected from owner name, instead of device name.
Plzzz help, i will be gratefulll
Edit/Delete Message

Dear All,
I had my samsung last month, everything was working fine, i was able to recieve files from bluetooth and send it. I think i messed up some blue tooth setting and from then i am un able to recieve any file from other bluetooth mobiles and PC and the message it shows is
"connecting with remote device failed"
However, i can send file from bluetooth to any mobile and PC. also, my mobile is getting detected from owner name, instead of device name.
Plzzz help, i will be gratefulll
Edit/Delete Message

in settings-connections beam
click auto recieve incomming beams
beam is not an IR thing it's all incomming data requests

Hi
cans to upload again the blouetooth.zip please?
The link is empty.

Alpine blouetooth manager
Hi
cans to upload again the blouetooth.zip please?
The link is empty.

Related

[Question]How to share internet from PC to Android via USB?

Hi community I don't have 3G neither Wifi on my office and I wish to share the Internet of my PC to my Android. Is this possible?
I have the choice of share the Internet from Android to PC via Usb, but i want the opposite. Note: "Sorry for my English"
--------------------------------------------------------------------------
Que tal comunidad, No tengo 3G ni Wifi en mi oficina y quisiera compartir el internet de mi PC hacia mi Android. Es esto posible?
Tengo la opción de compartir el Internet desde android hacia la pc via Usb pero lo que busco es lo contrario.
i would like to know too!
Never mind missread the question
any update on this? i'd really like to know too. i was wondering if there is anyway to do it via HTC Sync...
May be some windows program could do this. Please some smart guy at XDA help us.
Up Please!!
Does this help anyone?
http://forum.koolu.org/viewtopic.php?f=10&t=89
http://androidforums.com/g1-support...-between-android-my-pc-through-usb-cable.html
http://modmymobile.com/forums/491-root-access/544146-connect-g1-ad-hoc-network-solved.html
The first two links doesn't works and the third is for Wifi.
What we want do do is USB reverse theatering !
Nobody knows how to do that ?
Strange, all links work for me. I appreciate what you WANT is tethering I was offering an alternative as this hasn't yet been resolved.
This worked for me.
http://forum.xda-developers.com/showthread.php?p=11016548#post11016548
I search too.
I used this,
http://forum.xda-developers.com/showthread.php?t=481454&page=2
See the post by Brock Samson
when i rooted my g2 and was running sense i could have done this...it was called internet passthrough...everytime i plug my phone via usb it bought up the option of internet passthrough,sdcard mount and so on..i choose internet passthrough

help please! my xperia x2 is dead :(

hi everyone i come from chile and my english is not good enough . sorry about that i hope you understand my problem :
i was updating my phone to the last version by SEUS , when the aplication downloaded the update and started to install the new rom in my cellphone i didnt see my usb cable then i kicked it and i lost the usb movil-pc conecction so, the installacion was interrupted in the the beggining when the green bar was getting up now my xperia x2 is death it didnt do anything, when a press power buttom it only make a litle vibration and nothing else it could possible my xperia doesnt have a OS right now ? my xperia dont even load the SE logo with the whit screen
andres27 said:
hi everyone i come from chile and my english is not good enough . sorry about that i hope you understand my problem :
i was updating my phone to the last version by SEUS , when the aplication downloaded the update and started to install the new rom in my cellphone i didnt see my usb cable then i kicked it and i lost the usb movil-pc conecction so, the installacion was interrupted in the the beggining when the green bar was getting up now my xperia x2 is death it didnt do anything, when a press power buttom it only make a litle vibration and nothing else it could possible my xperia doesnt have a OS right now ? my xperia dont even load the SE logo with the whit screen
Click to expand...
Click to collapse
Hola
1) Sacale la batería
2) Vuelve a colocarla
3) Manten presionado el botón de bajar volumen y vuelve a presionar el botón de encendido, manteniendo presionado el botón de encendido hasta que salga el logo de SE con el fondo blanco
4) Si aparece, puedes volver a intentar flashear con SEUS. Si no, me temo que ladrilleaste tu X2. Lo siento.
Saludos.
Jolo_ said:
Hola
1) Sacale la batería
2) Vuelve a colocarla
3) Manten presionado el botón de bajar volumen y vuelve a presionar el botón de encendido, manteniendo presionado el botón de encendido hasta que salga el logo de SE con el fondo blanco
4) Si aparece, puedes volver a intentar flashear con SEUS. Si no, me temo que ladrilleaste tu X2. Lo siento.
Saludos.
Click to expand...
Click to collapse
i already do that several times my friend and it's useless...i wonder if sony ericsson has suport in chile...since i bought my x2 in ebay usa
does anyone else know anything about it? even if one of us has a similar problem with the x1 could be helpful for me
andres27 said:
hi everyone i come from chile and my english is not good enough . sorry about that i hope you understand my problem :
i was updating my phone to the last version by SEUS , when the aplication downloaded the update and started to install the new rom in my cellphone i didnt see my usb cable then i kicked it and i lost the usb movil-pc conecction so, the installacion was interrupted in the the beggining when the green bar was getting up now my xperia x2 is death it didnt do anything, when a press power buttom it only make a litle vibration and nothing else it could possible my xperia doesnt have a OS right now ? my xperia dont even load the SE logo with the whit screen
Click to expand...
Click to collapse
I feel your pain! The exact same thing happened to me. There was nothing I could do but to send the phone for repair/exchange.
I have written about this in another thread here. You can not "Hard reset" the phone from the state your telephone is now as you eventually could have done with a X1 with its soft buttons. Obviously the service centre I sent my phone to couldn't do anything either since they today actually decided to exchange my phone. I guess they must have tried to kick some life back into it since they had it for a week. Prepare for yet a couple of weeks more without your precious
GL,A.D
i see, the problem is i dont have any guaranty from S.E i've bought my x2 from a chilean guy who bought the phone in ebay so that phone was "double-sold" i dont know how say it, there's no sony ericcson support in chile so i dont know who can fixed it , i wonder if the x2 hard-spl could be the great solution, off course ..if would exist....
Damn, that is a very bad mistake.
That is why thy caution you to make sure your phone is in a safe/stable place whilst it is updating and not to move it.
I hope you are able to get it sorted out soon. Good Luck!
lol, i about to cry guys i need my x2 back, i have faith it could be fixed, after all i've paid a lot of money for it
andres27 said:
lol, i about to cry guys i need my x2 back, i have faith it could be fixed, after all i've paid a lot of money for it
Click to expand...
Click to collapse
You have to check if SonyEricsson has global warranty, which i guess they do and start figuring out to what country you could send it to for service. A problem here is i guess you don't have the original receipt but on the other hand the phone hasn't been sold so long it can be outside warranty time. You're gonna have to phone or email SE support abroad to start with to see what options you have.

[Q] [Possible or not ?] Screen capture using buttons' combinaison (en - fr)

Hello there !
First of all, pardon my bad English (even if I'm studying it, at Louvain-la-Neuve, Belgium).
I'll put the French one at the end.
Second thing, I searched a topic talking about the subject that'll follow, but I didn't find the same topic as mine. Maybe I didn't look enough. In this case. forgive me.
Well, I'm a recent user of Android... and I really love it ! (iPhone sucks =))
Since I've got mine, I did everything I can with my I5800 aka Apollo.
I rooted it, I fixed the GPS, I put the live wallpapers, I changed the fonts and the bootanimation.
But there is still one thing I'd like to have...
It's about takin' a capture of the screen !
For the moment, I use the ddms in the SDK package.
Galaxy S users can use a combinaison of button to make one.
On the Apollo, this combinaison exists BUT doesn't work. ("Unable to capture screen. Try again").
My question is : is it possible to "ad" the same function for the Apollo ?
I know some apps do this thing, but as a student I'm always short of money..
Thank you in advance ! =)
PS : my mobile is Samsung Galaxy I5800, 2.2, XXJPA, rooted
_______________
Pour ceux qui parlent français (et mieux l'anglais que moi) :
J'ai eu beau chercher, je n'ai pas trouvé de topic similaire au mien. Peut-être que j'ai mal regardé, auquel cas, pardonnez-moi.
J'utilise Android depuis peu, et j'aime vraiment beaucoup !
Depuis que je le possède, j'ai fait tout ce qui était possible de faire avec mon I5800 Apollo.
Je l'ai rooté, j'ai réparé le GPS (changé le serveur), j'ai activé les live wallpapers, j'ai modifié la police du système et même l'animation de boot.
Mais il me manque quelque chose que j'aimerais avoir...
C'est à propos des captures d'écran !
Pour l'instant, j'utilise un programme du pack SDK.
Sur le Galaxy S, il est possible de faire une capture d'écran via la combinaison de certaines touches.
Sur l'Apollo, cette combinaison existe mais ne fonctionne pas. Elle affiche un message d'erreur.
Ma question est : est-il possible d'activer cette fonction sur l'Apollo ?
Je sais qu'il existe des applications permettant de le faire, mais étant un étudiant, je suis souvent à court d'argent..
D'avance, merci ! =)
First, your english isnt bad at all....
Second, sorry i cant help you out with the screenshot thing
Third, how did u fix the gps? did u use the Gps booster app? can u pls upload it here?
Thank you about my English ! That gives me great hope for my exam comming soon ^^
For the GPS thing, well, there's a file named gps.conf
I downloaded one, changed the server location which is used by this file to connect you, and replace the gps.conf on the phone by the one I changed.
To change the server, use a program like Note Pad ++, or something like that.
Open the gps.conf file I give below and look after NTP_SERVER=fr.pool.ntp.org
Change fr by usa or ca for the Canadian for exemple.
Save, and put this file in your SDcard.
Then, two ways to change the first one by the new one (need to be root) :
FIRST :
open Terminal Emulator
enter su
enter remount rw
enter cat /sdcard/gps.conf > /system/etc/gps.conf
reboot
SECOND :
use a program like Root Explorer or Super Manager (free) and simply copy/paste from the SDcard to /system/etc.
Don't forget to delete the previous one.
How U change bootanimation. Please give link, it's appreciated.
It is possible
hey dude taking the screen shot of your phone is possible... but u,ll need to connect your mobile to a laptop...
Download and install phone explorer from here
http://www.fjsoft.at/en/
select usb debugging mode and connect your mobile to your laptop via usb
open phonexplorer and connect your phone
then in the extras menu u will find an option to take the screen shot of your phone...
see if it helps
Neo, I know about this way ; but I use the ddms on the SDK/tools.
madhuranand007, I'll put it later. It's not the subject here.
But, when I said "bootanimation", it's the animation following the firts one (with the space background), you see it ?
Edit : have a quick look around the XDA/Android subjects, and you'll find an answer to change the animation (replace the blinking Samsung).
Does anybody have an idea ? A solution ?
I just want to know if it's possible or not.
If yes, tell me how to do, please =)
neo1691 said:
hey dude taking the screen shot of your phone is possible... but u,ll need to connect your mobile to a laptop...
Download and install phone explorer from here
http://www.fjsoft.at/en/
select usb debugging mode and connect your mobile to your laptop via usb
open phonexplorer and connect your phone
then in the extras menu u will find an option to take the screen shot of your phone...
see if it helps
Click to expand...
Click to collapse
It really works thumbs up
Dude, as I said, I already know this way, but I use a "program" called ddms which is included on the SDK/tools.
All I want to know is.. see my first post ;-)
I have a Galaxy 3 with froyo and just press End & Home, the phone take a pict of the screen, even if is a program or whatever
.........................
the screenshot bug that you have mentioned in the first post was present in one of the earliest froyo roms...... it was then fixed in later builds like JPM....... which build are you using?
Also i would suggest you try out custom roms like indroid, kyrillos etc....... the bug is definitely fixed in those roms........
And as for your english it's not bad at all!
Hey its very simple. Just keep pressing the back button and press home button one.You will get notification screen captured saved as image.You Can see the screen shots in gallary.
madhuranand007 said:
How U change bootanimation. Please give link, it's appreciated.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1038964
^There's many of them and there's also instructions
And @Vermillon, try out JPM or custom ROMs using JPM as base screenshot bug is fixed in them.
maybe u cud get some help from this link.
http://forum.xda-developers.com/showpost.php?p=11100776&postcount=3602
;-)
Sent from my GT-I5801 using XDA App
theres very simple soln....for ur prob dude....in earlier froyo roms the screencaptureservice.apk didnt use to work.....try this http://www.multiupload.com/UOZHPPPX00 copy the app to system/app folder using rootexplorer and reboot....then after ur device reboots just press back button for 2 secs and immediately press home button.......and ur english is good buddy.

Need Microwear L5 firmware

I need latest microwear l5 firmware.. I tried contacting microwear through [email protected].. But they don't reply, it has been more than aa month.. No update coming through Fundo Pro app.. Please someone give me the firmware if you can.
Thank you
Issue l5 update
Sadman007 said:
I need latest microwear l5 firmware.. I tried contacting microwear through [email protected].. But they don't reply, it has been more than aa month.. No update coming through Fundo Pro app.. Please someone give me the firmware if you can.
Thank you
Click to expand...
Click to collapse
I have the same problem my watch is stuck in 0.0.4 version
floplop said:
I have the same problem my watch is stuck in 0.0.4 version
Click to expand...
Click to collapse
if I have the firmware file than I could have installed the firmware manually with nrf connect app
floplop said:
I have the same problem my watch is stuck in 0.0.4 version
Click to expand...
Click to collapse
contact me I managed to manually upgrade
did you have the firmware?
andimachrif said:
did you have the firmware?
Click to expand...
Click to collapse
Yes I have the firmware file which can be manually flashed by the nrf connect app from play store
Hello,
My watch stands in dfu mode after upgrading a firmware that not worked.
Can someone send me a firmware a the way to flash it manually ?
Thanks
Envoyé de mon Pixel 3 XL en utilisant Tapatalk
Sadman007 said:
Yes I have the firmware file which can be manually flashed by the nrf connect app from play store
Click to expand...
Click to collapse
Can I ask you to submit a firmware file? When updating by Fundo application the smartwatch died.
Could you tell us where to get the firmware file?
---------- Post added at 07:03 PM ---------- Previous post was at 07:00 PM ----------
I think that when we ask for help, it is so that they can provide us with a solution, and not to indicate that they have solved it and not to share the file or the solution, it is not ethical; not in this thread but in everyone. Thank you
Solución al error de actualización del firmware del MicroWear L5
Si te dio error al actualizar el firmware desde el fundo, instala nrf connect ejecuta y busca el dispositivo dfutarg, pulsa en Connect y luego la opción dfu, software packet Zip, busca en tu móvil en la memoria interna la carpeta fundo\frw y verás un archivo fundo.zip y enviar, a esperar y suerte.
jeyviman said:
Si te dio error al actualizar el firmware desde el fundo, instala nrf connect ejecuta y busca el dispositivo dfutarg, pulsa en Connect y luego la opción dfu, software packet Zip, busca en tu móvil en la memoria interna la carpeta fundo\frw y verás un archivo fundo.zip y enviar, a esperar y suerte.
Click to expand...
Click to collapse
Thank you very much.
Worked fine for me.
Sadman007 said:
contact me I managed to manually upgrade
Click to expand...
Click to collapse
Pm sent
Hi, Could soumebody say me where can i found : fundo\frw fundo.zip ?
Hello, I also have a Microwear L5 but with version 0.0.6.
Is there a newer one? if yes can someone help me please?
Thank u in advance.
Newer version
etimarques said:
Hello, I also have a Microwear L5 but with version 0.0.6.
Is there a newer one? if yes can someone help me please?
Thank u in advance.
Click to expand...
Click to collapse
Hi etimarques,
The latest firmware is v0.1.2 now. If you install the newest FunDo Pro app from Google Play, you can look for the newest firmware from this app and install it. It stores in the Fundo.zip file, what is mentioned above.
I don't know, whether in your case the titles in the smart watch for every page appear in English or Chinese. I had v0.0.6 firmware when I've bought it, and that time the titles appeared in English. After upgrading the firmware, they became Chinese. Update only if this is fine for you.
P.S.: If you have the v0.0.6 firmware, and the titles are English, could you upload your firmware? I would prefer those titles in English.
Hello..
Is it possible to have the firmware..
I am facing the same problem..
Thanks in advance..
Hello jest w stanie pomóc mi, mój l5 po aktualizacji umarł. Proszę o podanie jego po kolei mam wgrać oprogramowanie.
Sadman007 said:
Yes I have the firmware file which can be manually flashed by the nrf connect app from play store
Click to expand...
Click to collapse
can u please send me this file with firmware?
Old firmware
Hi all,
Not sure if i'm too late on this.
When I first got my L5 9-12months ago or so, it came with 0.0.6 and I got about 6weeks of use for the first three charges.
I updated to 0.1.2 (later to 0.1.3) but I can still consistently only get about a week from a charge now.
I highly doubt this is battery related, as it came exactly as I updated -and after a few months of use prior.
Can anyone PM me the original firmware 0.0.6 if they still have it, or a link to where I can find it pls?
I'm seeing a lot of "i have it", so I'm hoping someone still does.
I'd just like to rule the firmware out of the equation.
Thanks all.

TLink err: sd_carplay no run

Hey guys,
I’m getting the following error whenever I open the application on my android head unit, anyone knows how to fix this?
Thanks!
Up
Same issue here, with multiple Tlink versions. At the end of my wits here.. is it just that our units do not support Carplay?
Tengo el mismo problema, vi este video donde se puede ver que instala y ejecuta una aplicacion llamada sdCarplay, pero no tengo mas informacion :c
Traducción: I have the same problem, I saw this video where you can see that it installs and runs an application called sdCarplay, but I don't have more information
Up. i stacked that... i need to solution too
I have the sd_carplay file but I can’t install the app on android 11.
App not installed says even using apk installers also enabling unknown sources.
Anyone who can tell me how to fix the apk I’ll provide it
Emervilaw said:
I have the sd_carplay file but I can’t install the app on android 11.
App not installed says even using apk installers also enabling unknown sources.
Anyone who can tell me how to fix the apk I’ll provide it
Click to expand...
Click to collapse
can u send the apk please????
Google Drive: Sign-in
Access Google Drive with a Google account (for personal use) or Google Workspace account (for business use).
drive.google.com
If you manage to fix this apk please share

Categories

Resources