EDIT: Problem solved (Reset ADB Connection several times) - Pls close/ delete Thread
Related
Hello,
I just uninstalled the Arabic support package (Pocket Arabizer Suite v2). Afterwards, I am not able to use my wing to make calls. I even tried to search for network and couldn't find any. I was thinking if I reinstall the Arabic package might help. Unfortunately, ActiveSync is not working no more as well. Also, I tried hard reset (by holding the 2 soft keys along with soft rest) but it wont reset.
Anyone got a clue ?
Please don't cross post. Post once, and wait for a response ... don't flood the forum.
Hi,
My HP 6915, when i make a soft-reset doesn´t ring and does not assume the changes, for it to ring.
i can´t resolve with hard reset because it still the same.
did anyone had the same problem?
thanks
did you recently plug in the headset? If so try plugging it it in again and take it out slowly (sometimes the contact has been known to get stuck)
Did you install TOmTOm on it, there is a known issue with sound after installing this app. This is what solved it for me:
I have found a solution to the issue with TomTom 6. When it installs, it overwrites two dlls in the PPCs Windows directory, BtCoreIf.dll and BtSdkCE30.dll. Immediately after TT6 install rename each of these to .old, or delete each file. Windows automatically re-installs the originals. Do a soft reset and all then works ok.
eastdick said:
Did you install TOmTOm on it, there is a known issue with sound after installing this app. This is what solved it for me:
I have found a solution to the issue with TomTom 6. When it installs, it overwrites two dlls in the PPCs Windows directory, BtCoreIf.dll and BtSdkCE30.dll. Immediately after TT6 install rename each of these to .old, or delete each file. Windows automatically re-installs the originals. Do a soft reset and all then works ok.
Click to expand...
Click to collapse
Hello! i am reviving this thread, because i also have a sable 6915 and recently after a day of normal operation the phone stopped giving sound. The only thing different was that i had the CPU overclocked to a safe setting on "pocket hack master: 520 mhz".
I tried hard reseting with no luck... I don't think that it has to do with hardware, but you just never know...
anyone else with the same problem, that found a solution?
I think the issue is worth a new thread since the M2D thread is getting way to bloated with other issues (display, lines missing etc.)
There are several suffering this problem after installing to M2D version 18 and it seems no to be 100% ROM and device related but definitely points to DSM files.
In one thread for a Touch (if memory servers right) deleting 6fb415....DSM helped.
Surprisingly enough after hard reset I installed EVERYTHING prior M2d update 18 and all worked so I guess it's not the ROM as stated above.
Suggestions solutions for the ones used to sync to the corporate server without going back to upgrade 13 or 14 (hard reset again ).
Edit and steps to a solution:
Some may experienced the same problems with sync errors with various ROMs after installation of the latest Manila update (version 18 in this thread.
I had the same issue 80004005 and "motisu" made me aware of a version 1.0 created by "xplode" which can be found here.
Steps to solve the issue WITHOUT hard reset:
Install SKTools (Memmaid may also work but I didn't test it)
Disable M2D
Soft Reset
Uninstall the Manila2D cab using the regular uninstall.
Soft Reset
Run SKTools Clean
Mark at least the DSM entry found (better mark all) to delete the entries
Soft Reset
Run SKTools again and check that the DSM entry is gone (if not clean ll again)
Soft Reset
Install Manila2D_1.00_1819.2926-xplode.CAB from the xplode link above
Soft Rest
Disable M2D in settings - today
Check if active sync works
Enable M2D in settings - today
Reconfigure it like you like it using M2DCT
Only issue is that xplode removed the Youtube link in the Internet tab (I can live with that) but Youtube still works (what the heck put it in the Launcher widget).
I don't want to state that for a NEW install the xplode-CAB is better but I'll keep it in case I reflash my phone with the same ROM.
Good Luck
Hi @all!
I´ve found the command
Code:
31#"\Windows\PowerOffWarning.exe", "PowerOff"?\Windows\PowerOff.exe, -101
here in this Forum and now i have a question:
I was searching here for a long time to do a soft reset on my decive in the same way with a *.lnk File and a Short Cut.
(In the Moment i do this with a softreset.exe, but if possible, i will change it to the *.lnk Shortcut)
Is there already a commandline for a restart of the device - i mean a soft reset and NOT a Hardreset. My Mobile has WM6.1
Thanks for answering and good bye
Jürgen
PS: I asked this question in the Kaiser Forum in an existing Thread, but i think it´s a general theme of windows mobile. So i opened this Thread. I have searched for along time about this prob here and nothing found. Is there is an existing one i´ve not found, pls delete or close this one.
Hi everyone, I have a problem after recovering from recovery, when I try to set the pin it always tells me that it is wrong as seen from the video that I attach, I tried to reset several times, to put the sequence in place of the pin, but I have not solved in any way.
ps. sorry for my bad english
youtube.com/watch?v=TOg7kvCZODM
Try resetting the device...check if force disable encryption is enabled....disable that and don't restore the backup from google when you set up the device.
I m no pro i just remember doing this on my note 5 pro
alamp said:
Hi everyone, I have a problem after recovering from recovery, when I try to set the pin it always tells me that it is wrong as seen from the video that I attach, I tried to reset several times, to put the sequence in place of the pin, but I have not solved in any way.
ps. sorry for my bad english
youtube.com/watch?v=TOg7kvCZODM
Click to expand...
Click to collapse
Just delete the ROM password while in recovery mode.
Go to /data/system/ in the recovery file explore, and delete these files:
gatekeeper.password.key
gatekeeper.pattern.key
locksettings.db
locksettings.db-shm
locksettings.db-wal
thank you all, I solved by flashing the rom