Hi everyone, I have a problem after recovering from recovery, when I try to set the pin it always tells me that it is wrong as seen from the video that I attach, I tried to reset several times, to put the sequence in place of the pin, but I have not solved in any way.
ps. sorry for my bad english
youtube.com/watch?v=TOg7kvCZODM
Try resetting the device...check if force disable encryption is enabled....disable that and don't restore the backup from google when you set up the device.
I m no pro i just remember doing this on my note 5 pro
alamp said:
Hi everyone, I have a problem after recovering from recovery, when I try to set the pin it always tells me that it is wrong as seen from the video that I attach, I tried to reset several times, to put the sequence in place of the pin, but I have not solved in any way.
ps. sorry for my bad english
youtube.com/watch?v=TOg7kvCZODM
Click to expand...
Click to collapse
Just delete the ROM password while in recovery mode.
Go to /data/system/ in the recovery file explore, and delete these files:
gatekeeper.password.key
gatekeeper.pattern.key
locksettings.db
locksettings.db-shm
locksettings.db-wal
thank you all, I solved by flashing the rom
Related
i've tried to put a password on my 6.1 rom, and, i've reset it, and when i put the password, won't work. good. i've har reset it, still ntothing. i've installed again the rom still same problem. what can i do?
This screenshot is after a new update of rom:
have you done the no,yes,yes in the boot options once you have flashed the new rom ?
I read somewhere that if you forgot your password you could just clear the registry (no,yes,no) and it will remove the password.
where exactly to do that with no yes? after update appear alignament screen, and clock setting.
xplode said:
Upgrade HOWTO:
1.Download the archive below
2.Extract it to folder in your computer
3.The password for the archive is blueangel
4.Copy EXTROM folder to your SD card (customize it if you want to)
5.Put your device in bootloader mode - For help with this step read here
6.Run Upgrade.exe to start the upgrade procedure
7.After finishing the upgrade wizard soft reset your device to exit bootloader- For help with this step read here
9.Hard reset your device - For help with this step read here
10.Allign screen
11.Wait for the instalation of the cabs from the EXTROM after that the device will soft reset
Congratulations, you are ready to use your device
Click to expand...
Click to collapse
This is from one of Xplode's posts
Step 9 im talking about click the "read here" link.
remember to push the mail button at the end of the step, i forgot that the first time!
pussing email button is for? for exiting the hard reset menu?
It is for performing the choosen operations, something like save and exit, or more like apply settings or something like this
I have WM 6.1 instaled
I changed the SIM card, I put the battery again, but now I'm not able to enter windows. I write my password but it say it isn't correct. I can't understand it!!!!
even if I put my old SIM or without sim, now it doesn´t recognise my password.
I wouldn´t like to reinstall everyth just now :-(
what can I do??
please...
thank you
It was said multiple times here, that you should not set up device password because of intermittent errors related to it. Now all ypou can do is HardReset and recover from last backup. Or maybe it's time to make your first backup?
Ohh!!!! no!!!!! mierda!!!!
thanks anyway.
Yes, I haven't got a backup, but I'm not at home so I can't do anything! mierda mieda y mierda!
here u go without a HARD RESET
just go to the hard reset menu by pressing camera+record and reset.
Select yes for clean registry hive and no for others than save.
it will remove password but u may have to re-install some of ur softwares and re configure some settings.
All ur msgs, contact etc. remain intact.
I CAN CONFIRM THIS CAUSE IT HAPPENS WITH ME TOO AND YES TODAY.
This is in fact a Hard Reset (cleaning registry) without formatting internal flash - so files from it are not lost, but most applications will need regular reinstallation.
well it has been said that when you want to remove the battery for some reason, just press the power button to put the device on standby, wait 20 seconds, and then remove the battery without waking the device, this way your registry stuff remains intact and it is a lot harder to screw your pasword.
krishan2207's way is more proper for your case, you will suffer almost nothing this way
Hi All,
first of all , hope to put this issue in the correct forum path....
my friend has a problem with the Pro2, as you can see by the attach , concerning the keyboard password lock.
His password doesn't works and also performing all the reset type , after the reboot the mobile starts with the keyboard locked (only emergency number is possible call).
he has reported me that at the first time, the mobile has gave to him an alphanumeric code to try to unlock the code but it doesn't solved the issue.
probably re-installing the software (6.5) the problem is solved but he doesn't want loss the date / appointments due the fact he has a doctor.
please help us.
thanks
Hi again,
it's appreciated also if someone know if there's a way to perform the backup in this condition.
Thanks again
tezzuro said:
Hi again,
it's appreciated also if someone know if there's a way to perform the backup in this condition.
Thanks again
Click to expand...
Click to collapse
Did he ever use Activesync or Google Sync? If he did, most of his information sould be saved that way. Also, you may want to try doing a hard reset but only after exausting all attempts to back your data up. Send a couple of PM to Senior memebers or Moderators, you might get some help that way!!
Good luck!!
thanks for your post....
principal problem is that is not possible connect the mobile to pc in order to use activesync or other program due the fact the mobile is locked....and not save data has been performed before....
Double chack that his SIM card is in correctly.
Same exact thing happened to me. My phone battery was at about 10% and when I tried the password that I had set... it didn't work. This made me frantic and very ticked off. I had a ROM on my SD card so i just reflashed from there. Since then I always install a different locking app then the stock one. I just can't trust it. So I think youre only option is to hard reset and hopefully your contacts are saved to the SIM so they won't be deleted.
Hi Folks,
My 7500 is running the AP Redux ROM.
I went to enter my pin to unlock the device and was greeted with the message that the device would be wiped if i got it wrong after the first attempt (weird!).
So i was putting in my pin when the car braked and, wrong pin, dev wiped. :-/
After restart, not only was all my stuff gone, but the MicroDrive now no longer exists. Tried re-flashing the (same) ROM, but still no joy.
It doesn't show up using the PC or using any device info or file explorers.
Any ideas?
Thanks!
Do you have a "Format Microdrive" icon in start>settings>system ? If so, did you try to reformat the drive yet? As you have probably already lost your stuff from the drive, it may restore it after the format. This is an old fix that I found with the "search" function.....
BTW, I had to do it a while back after a bad flash, and it did work for me.
Later...............
hdbueller said:
Do you have a "Format Microdrive" icon in start>settings>system ? If so, did you try to reformat the drive yet? As you have probably already lost your stuff from the drive, it may restore it after the format. This is an old fix that I found with the "search" function.....
BTW, I had to do it a while back after a bad flash, and it did work for me.
Later...............
Click to expand...
Click to collapse
No, i don't have that. I looked through all the posts too but couldn't see anything relevant. I'm presuming it is just some security setting/glitch as it disappeared when the wrong PIN was entered. I'm hoping it might re-appear when i get back home and reconnect it to the server/domain.
Really annoying as i just got the GPS working properly.
Thanks anyway!
Hi,
after update my Iconia A500 to 3.1 for two days everything going well. But today morning i can`t connect to any wifi. Problem is wifi still reconnecting again and again. If i manualy setup IP, GW and DNS its OK and i have connect.
I tried 3 same wifi routers like days before.
What could be a problem?
thx for help
EDIT> Problem solved. I deleted dhcpd-wlan0.lease in data/misc/dhcp/
hi see this thread for advice with this.
http://forum.xda-developers.com/showthread.php?t=1138905
thx, problem solved
i have the same problem, first time solved by deleted the file, but few days later the problem comes again then can't solve by same method....
Delete the file again. Sometimes it recreates the faulty file.
bpivk said:
Delete the file again. Sometimes it recreates the faulty file.
Click to expand...
Click to collapse
Ihad to do it twice as well, second time deleted the file rather then moving it, did a reboot straight after worked fine ever since.
there is no more file in the directory.....i even try to do factory reset & reflash rom but cant solve also ><
alvanyap said:
there is no more file in the directory.....i even try to do factory reset & reflash rom but cant solve also ><
Click to expand...
Click to collapse
The file will be recreated as soon as you turn On/Off the wifi again.
Just repeat a few times if you don't see the file and then delete it again.
hi,
I had the same problem on my Iconia Tab.
There's an easy way to repair it: Just hit the "Reset" button -on the left of the USB-Port- once.
It does restart. After that restart, all my stuff were still on the Tab! And the Wifi works too!
I'm not sure if this work on any IconiaTab A500, make sure you make a full Backup!
Greets
Adrian Mignogna
PS: Sorry for my English, I'm Swiss....oh, and check out my Blog!
magmisko said:
Hi,
after update my Iconia A500 to 3.1 for two days everything going well. But today morning i can`t connect to any wifi. Problem is wifi still reconnecting again and again. If i manualy setup IP, GW and DNS its OK and i have connect.
I tried 3 same wifi routers like days before.
What could be a problem?
thx for help
EDIT> Problem solved. I deleted dhcpd-wlan0.lease in data/misc/dhcp/
Click to expand...
Click to collapse
Hi there, I'm trying to delete that file myself. But when I enter the /data directory I find there is nothing there. How did you see the file in order to delete it?
Cheers
Jerra said:
Hi there, I'm trying to delete that file myself. But when I enter the /data directory I find there is nothing there. How did you see the file in order to delete it?
Cheers
Click to expand...
Click to collapse
Check your other post.
dhcp
Go to the Acer website and download the fix. Had the same issue would do a paperclip reset and would fix for a few days and end up with same issue. Downloaded the fix from Acer and have not had anymore issues since then.