Hello! Recently bought a junsun v1 device 2gb/32gb with allwinner T3 p1 chip runs android 11 (8.1). I tried to find code for enter engineer Mode to make it boot faster but nothing worked for me.
Furthermore i faced a problem with steering wheel control setup.
I do the setup, for a wille everything works great but after a few minutes the buttons are messed up.
Has anyone faced something like this!? Do you think is wiring problem or software (application bug).. I had another head unit before and didn't have any problem.
vaggostrik said:
Hello! Recently bought a junsun v1 device 2gb/32gb with allwinner T3 p1 chip runs android 11 (8.1). I tried to find code for enter engineer Mode to make it boot faster but nothing worked for me.
Furthermore i faced a problem with steering wheel control setup.
I do the setup, for a wille everything works great but after a few minutes the buttons are messed up.
Has anyone faced something like this!? Do you think is wiring problem or software (application bug).. I had another head unit before and didn't have any problem.
Click to expand...
Click to collapse
Hi, do you have canbus and its settings in infotainment / factory settings ?
Yes it has but i don't know how to setup it. Don't know much about canbus! The car is suzuki swift 2007 if this helps
vaggostrik said:
Yes it has but i don't know how to setup it. Don't know much about canbus! The car is suzuki swift 2007 if this helps
Click to expand...
Click to collapse
in canbus menu will be number of vehicles supported from this canbus device, select number for your vehicle model and year and save and then restart and see if controls are working
I will give it a try! Thank you very much
Didn't work for me.. Still messed up
vaggostrik said:
Hello! Recently bought a junsun v1 device 2gb/32gb with allwinner T3 p1 chip runs android 11 (8.1). I tried to find code for enter engineer Mode to make it boot faster but nothing worked for me.
Furthermore i faced a problem with steering wheel control setup.
I do the setup, for a wille everything works great but after a few minutes the buttons are messed up.
Has anyone faced something like this!? Do you think is wiring problem or software (application bug).. I had another head unit before and didn't have any problem.
Click to expand...
Click to collapse
I have the same problem with the steering wheel control settings ( I do the setup, for a wille everything works great but after a few minutes the buttons are messed up.)
Please did you solve the problem?
Karves79 said:
I have the same problem with the steering wheel control settings ( I do the setup, for a wille everything works great but after a few minutes the buttons are messed up.)
Please did you solve the problem
Click to expand...
Click to collapse
No i didn't problem still here
vaggostrik said:
No i didn't problem still here
Click to expand...
Click to collapse
that's a shame, I wrote to Junsun, so I'm waiting for him to write back.
Karves79 said:
that's a shame, I wrote to Junsun, so I'm waiting for him to write back.
Click to expand...
Click to collapse
Hope to have an answer soon.. You have the same model? With allwinner T3 p1 processor?
vaggostrik said:
Hope to have an answer soon.. You have the same model? With allwinner T3 p1 processor?
Click to expand...
Click to collapse
Yes I have allwinner T3 p1.
Guys try replacing a canbus box for device if you have any other available.
If not, order a stable one, but first you must see if device has canbus box (a box that communicates with car computer)
Problem with steering wheel controls solved. The seller wrote me back, tested and works!
Steering wheel control learning interface, reset the button in the upper right corner
Then click on the impedance selection, switch to select high and low impedance, and then learn the square control button again.
Karves79 said:
Problem with steering wheel controls solved. The seller wrote me back, tested and works!
Steering wheel control learning interface, reset the button in the upper right corner
Then click on the impedance selection, switch to select high and low impedance, and then learn the square control button again.
Click to expand...
Click to collapse
Thank you very much i will give it a try. But to be honest i can't understand exactly what i should do .
vaggostrik said:
Thank you very much i will give it a try. But to be honest i can't understand exactly what i should do .
Click to expand...
Click to collapse
OK seems to work for me too!! I will check it more! Thanks again my friend!
Cool. I'm glad I helped you. Now I'm dealing with a new problem, my rear speakers are not playing.
edit: so the problem is not with the radio but with the car
Karves79 said:
Cool. I'm glad I helped you. Now I'm dealing with a new problem, my rear speakers are not playing.
Click to expand...
Click to collapse
So sorry for that. Mine works great! Don't have such problem. Are you sure is the head unit responsible for that?
As far as i m concerned the only thing that bothers me is that when i start the car always have to wait to boot... And can't find a solution
I think they played the rear speakers on the original radio. But I won't try again. I don't mind that much. I'll just have to buy an fm amplifier, it's not as strong as the original radio. Otherwise the radio is great.
Hello friends! I have a Jansun V1 head unit based on Allwinner quad-core t3 p1, 2/32 gb on Android 11
How can I set it so that the car radio does not turn off at all when the engine is turned off, but goes into sleep mode. I want the car radio to be immediately ready for use the next time the engine is turned on, and not wait for a long boot. Thank you!
Nakhman said:
Hello friends! I have a Jansun V1 head unit based on Allwinner quad-core t3 p1, 2/32 gb on Android 11
How can I set it so that the car radio does not turn off at all when the engine is turned off, but goes into sleep mode. I want the car radio to be immediately ready for use the next time the engine is turned on, and not wait for a long boot. Thank you!
Click to expand...
Click to collapse
Have the same issue but i don't think that we can do something about that.
Related
which the best android head unit for qashqai 2014 360 camera vision?
SUV users don't deserve nice units
hehe is a joke
forziere said:
which the best android head unit for qashqai 2014 360 camera vision?
Click to expand...
Click to collapse
Are you still looking for a Head Unit or have you fitted one.
What kind of qashqai do you have the J10 , J10 MK2, J11 ?
HgtDave said:
Are you still looking for a Head Unit or have you fitted one.
Click to expand...
Click to collapse
Link to Android Head Unit fitted to J11 Tekna with 360 Cameras and Park Assist https://www.qashqaiforums.co.uk/viewtopic.php?f=29&t=3465#p59657
I fitted the pumpkin auto 4gb android 8.0 unit to my j10 2013 qashqai.
Front camera is a bit fiddly to get working, but it works.
I made a video of it working here
Read the comments for more useful hints. Watch out for how you wire the camera button. I (And one of the commenters) blew fuses in our bcm. My car was off the road for a cpl of weeks haha!
I have since rooted my unit, because it allowed me to have tasker run and not be killed when turning off the ignition. I setup a profile which flashes up a "Activate front cam" menu whenever the car goes below 3mph.
Before I did this it involved 4+ button presses to get the front cam up. Now the button is there when I need it.
If you need any pointers feel free to ask. :laugh:
I have been using joying head unit for a few years. You get the 360 camera input to work, I had to change the signal wire logic level from 6v to 12v. Easily done with a couple of transistors.
Hello everybody. I put in the 8227l chinese head unit in my prius. It is a 1 Gb 16 GB variant. I use car launcher pro. Works like a charm except a huge issue...
A number of times i woukd start the car and it will be set to a volume of 15 automatically, blasting sound on radio. I have tried using the default volume level, turning power amplifier to half in factory settings and all. It wud start working fine and then suddenly in the next start up it wud b on 15. This problem is intermittent and not always there. Any help? Shud i update firmware?
shezi2243 said:
Hello everybody. I put in the 8227l chinese head unit in my prius. It is a 1 Gb 16 GB variant. I use car launcher pro. Works like a charm except a huge issue...
A number of times i woukd start the car and it will be set to a volume of 15 automatically, blasting sound on radio. I have tried using the default volume level, turning power amplifier to half in factory settings and all. It wud start working fine and then suddenly in the next start up it wud b on 15. This problem is intermittent and not always there. Any help? Shud i update firmware?
Click to expand...
Click to collapse
I am on the hunt for a solution to this problem!! I'll report back when I find one .. cuz holy effing **** does this ever piss me off also!!!
Even I had the same issue with volume and startup (Default) volume setting was missing so performed software update and now. got more functions that were missing from headunit. I have YT9216B headunit if you have same i have created a thread to update perform firmware update.
check this link:
Firmware update(8227l_demo)
Finally after searching I found firmware for this head unit(YT9216B) with less bugs . Youtube Link: Note: This update is for 1gb/16gb device and if flashed on 2gb/16 or 32gb might give errors. Firmware link...
forum.xda-developers.com
Mine 8227l demo HU (2GB-32GB Android Go 8.1) have this same problem. Any solution please
shezi2243 said:
Hello everybody. I put in the 8227l chinese head unit in my prius. It is a 1 Gb 16 GB variant. I use car launcher pro. Works like a charm except a huge issue...
A number of times i woukd start the car and it will be set to a volume of 15 automatically, blasting sound on radio. I have tried using the default volume level, turning power amplifier to half in factory settings and all. It wud start working fine and then suddenly in the next start up it wud b on 15. This problem is intermittent and not always there. Any help? Shud i update firmware?
Click to expand...
Click to collapse
I have solved this on my peugeot 308 with alps FF5000 8227L demo device. Problem is in memory. It deletes some settings after vehicle shudown, or when you change some settings in advanced menu (8888) all times.
My solution is when that occurs go to infotainment/ volume - and adjust the first volume media volume bar to your need (ussually 5 or 6). Adjust and other ones aswell - BT , sound media etc.
Then, when set, do not disengage your car (don't turn off ignition), let it running for 3 minutes.
Tricky part is that in some devices there is a option in infotainment main menu / common option for memory save / standby time - option that says in which time to shutdown and save after ignition off. If you could find these you must set it to 0 minutes . It worked for me. After all tht you can take ignition off, remove key wait for 3 minutes and start up again HU. It will work nicely now. You can set up options for DSP effects also in infotainment / sound - to memorize those aswell (if device have DSP option).
Below are pics to see where is what on my device, find on yours, probably is similar.
Hello everyone,
I have a Dasaita PX5 and Android 8.0 for my Jeep Compass 2018. Problem is that (1) steering wheel controls have stopped working. Used to work for a while when the unit was first installed then one day just ceased to function. And (2) reverse camera video is blinking after driving for around 20-30 mins (doesn’t blink when engine is on and not running)
I've updated both the MCU (V3.45) and system update (20190731) to the latest ones in hopes of fixing it. I also went to factory settings and tried all canbus that had "Jeep" on it and selected the right model of the car but SWC still not working including the controls at the back of the steering wheel. The only thing that's working is the right side of the steering wheel which is the cruise control function.
I had an auto electrician check it and said “there's no problem with electrical side“ and now he's saying maybe the switches are broken (which I doubt) cos when the car battery was changed not long ago (SWC already not working this time), SWC came back to life but only for short period of time.
Please help me figure this out. Any advice would be greatly appreciated.
fshwgg3xg22g said:
Hello everyone,
I have a Dasaita PX5 and Android 8.0 for my Jeep Compass 2018. Problem is that (1) steering wheel controls have stopped working. Used to work for a while when the unit was first installed then one day just ceased to function.
And (2) reverse camera video is blinking after driving for around 20-30 mins (doesn’t blink when engine is on and not running)
I've updated both the MCU (V3.45) and system update (20190731) to the latest ones in hopes of fixing it. I also went to factory settings and tried all canbus that had "Jeep" on it and selected the right model of the car but SWC still not working including the controls at the back of the steering wheel. The only thing that's working is the right side of the steering wheel which is the cruise control function.
I had an auto electrician check it and said “there's no problem with electrical side“ and now he's saying maybe the switches are broken (which I doubt) cos when the car battery was changed not long ago (SWC already not working this time), SWC came back to life but only for short period of time.
Please help me figure this out. Any advice would be greatly appreciated
.
Click to expand...
Click to collapse
Does factory head unit function OK with SWC
I put back the factory unit back in (factory unit worked without issues) but the steering wheel buttons still didn't work. Does this mean that the problem lies in the steering wheel buttons and not in the CANbus decoder?
Hello,
I bought a generic android headunit and configured the volume and skip buttons to work (they kind of worked because the unit would only have memory for 3 buttons). I didn't like the audio quality of the device so I returned it and reinstalled my factory radio but now the volume and skip buttons don't work. The phone and Bluetooth speaking button still work however. Only a couple times I've noticed they're working again but otherwise it usually doesn't work
Just wondering if this has happened to anyone else or how I can resolve this?
I have a 2011 Camry LE
rapiollymega said:
Hello,
I bought a generic android headunit and configured the volume and skip buttons to work (they kind of worked because the unit would only have memory for 3 buttons). I didn't like the audio quality of the device so I returned it and reinstalled my factory radio but now the volume and skip buttons don't work. The phone and Bluetooth speaking button still work however. Only a couple times I've noticed they're working again but otherwise it usually doesn't work
Just wondering if this has happened to anyone else or how I can resolve this?
I have a 2011 Camry LE
Click to expand...
Click to collapse
Is it an MTCD/E?
Teh crickets.
I believe MTCD, it's a generic brand with a PX6 processor and android 10
Code:
https://www.ebay.com/itm/64G-Android-10-0-Car-Stereo-For-Toyota-Camry-GPS-Navigation-Head-Unit-BT-5-0-OBD/313133976310?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
rapiollymega said:
I believe MTCD, it's a generic brand with a PX6 processor and android 10
Code:
https://www.ebay.com/itm/64G-Android-10-0-Car-Stereo-For-Toyota-Camry-GPS-Navigation-Head-Unit-BT-5-0-OBD/313133976310?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
Click to expand...
Click to collapse
What is MCU version?
I am not sure as I don't have the head unit anymore. I'm using my stock radio.
Yet another not MTCD, requested mod moves to Android head units forum.
Hello there all, I recently installed an android head unit from AliExpress, and everything went well until I first noticed that non of the buttons on the wheel worked. I saw many posts about this, but I didn't mind as I really didn't use it much. However, I got a professional to install the reversing camera that came with the head unit and try fixing the steering wheel's buttons. Because the professional attempted to fix the buttons for the steering wheel, he caused non of the buttons below the head unit to work (e.g. radio, the numbers, and turning the circle to try and change the volume). The "professional" was only able to get 2 of the buttons on the steering wheel to work (volume up and down, but you have to hold it down for like 5 seconds before it works), and when I tried to get back to him, they didn't respond. Also some reason, the volume will randomly mute every now and then (e.g. listening to music and the volume goes to 0).
I have seen many other threads about checking fuses and removing the battery for 10 minutes; however, I was wondering if there may be other fixes you guys may have that may help before attempting the battery method.
I would also like to say that I'm not overly confident working with or in cars. However, if there is a video or a simple explanation on how to do the fix, that would help make me feel confident.
Car: 2010 Ford Fiesta LX , 4sp auto 1.4L 4cyl Petrol.
Android head unit (model T10 6G 09 to 11): https://www.aliexpress.com/item/400...0.0.784e38daJ9X36b&mp=1&gatewayAdapt=Pc2Msite
edit: I have checked both 15amp and the 7.5amp and they were both fine.
reaL3ty said:
Hello there all, I recently installed an android head unit from AliExpress, and everything went well until I first noticed that non of the buttons on the wheel worked. I saw many posts about this, but I didn't mind as I really didn't use it much. However, I got a professional to install the reversing camera that came with the head unit and try fixing the steering wheel's buttons. Because the professional attempted to fix the buttons for the steering wheel, he caused non of the buttons below the head unit to work (e.g. radio, the numbers, and turning the circle to try and change the volume). The "professional" was only able to get 2 of the buttons on the steering wheel to work (volume up and down, but you have to hold it down for like 5 seconds before it works), and when I tried to get back to him, they didn't respond. Also some reason, the volume will randomly mute every now and then (e.g. listening to music and the volume goes to 0).
I have seen many other threads about checking fuses and removing the battery for 10 minutes; however, I was wondering if there may be other fixes you guys may have that may help before attempting the battery method.
Car: 2010 Ford Fiesta LX , 4sp auto 1.4L 4cyl Petrol.
Android head unit (model T10 6G 09 to 11): https://www.aliexpress.com/item/400...0.0.784e38daJ9X36b&mp=1&gatewayAdapt=Pc2Msite
Click to expand...
Click to collapse
Have you set the right car in the CAN-settings menu?
Clarify if your steering wheel buttons are provided via CAN or resistor related. (Car dealer)
rigattoni said:
Have you set the right car in the CAN-settings menu?
Clarify if your steering wheel buttons are provided via CAN or resistor related. (Car dealer)
Click to expand...
Click to collapse
I have set the CAN-settings to what the seller provided from AliExpress.
However, I think the steering wheel buttons are functional by resistors/resistance. (e.,g. wiring of KEY1, KEY2 and KEY GND).
I have a feeling that the "professional" may have done something to the wiring or such just to get the steering wheel buttons to work but in the process, he has made the radio control panel buttons not work anymore.
My main focus is just to fix the radio control panels (the picture below) as I use those way more than any other buttons on the steering wheel.
reaL3ty said:
I have set the CAN-settings to what the seller provided from AliExpress.
However, I think the steering wheel buttons are functional by resistors/resistance. (e.,g. wiring of KEY1, KEY2 and KEY GND).
I have a feeling that the "professional" may have done something to the wiring or such just to get the steering wheel buttons to work but in the process, he has made the radio control panel buttons not work anymore.
My main focus is just to fix the radio control panels (the picture below) as I use those way more than any other buttons on the steering wheel.
Click to expand...
Click to collapse
The radio control panel is provided by the CAN.
As no one knows what they did to the wiring, any help with it is no possible. You need to talk with the "professional" to get this fixed.
In your case about the SW buttson are connected to the resistor cales, you just need to search for the related app to set them. This is no automatism. May be you need to search for the SW in the settings. As I don´t know your system, I am not able to provide more help here.
Edit: You may test some other CAN-settings, may be they changed something and this leads to the issue with the radio buttons.
rigattoni said:
The radio control panel is provided by the CAN.
As no one knows what they did to the wiring, any help with it is no possible. You need to talk with the "professional" to get this fixed.
In your case about the SW buttson are connected to the resistor cales, you just need to search for the related app to set them. This is no automatism. May be you need to search for the SW in the settings. As I don´t know your system, I am not able to provide more help here.
Edit: You may test some other CAN-settings, may be they changed something and this leads to the issue with the radio buttons.
Click to expand...
Click to collapse
I get that, I don't really care about the SW buttons. I'm mainly just more focused on trying to figure out the radio control panel. I'm confused because the radio control panel stopped working as I had the "professional" help. Also, it's hard to talk with them again as they gave just left me on read for about 2 weeks now (from Airtasker).
I'll have another look tomorrow deeper into the CAN-settings, and will message the AliExpress seller for some help as I remember they said a problem like this might occur without the correct CAN-settings as you mentioned as well.
reaL3ty said:
I get that, I don't really care about the SW buttons. I'm mainly just more focused on trying to figure out the radio control panel. I'm confused because the radio control panel stopped working as I had the "professional" help. Also, it's hard to talk with them again as they gave just left me on read for about 2 weeks now (from Airtasker).
I'll have another look tomorrow deeper into the CAN-settings, and will message the AliExpress seller for some help as I remember they said a problem like this might occur without the correct CAN-settings as you mentioned as well.
Click to expand...
Click to collapse
Did you manage to get this sorted?