Hello,
By installing a PX6 car radio on a 2006 Peugeot 407 coupé, I lost the following functions; Back-up beep forward and Back-up beep back.
The reversing beeps are materialized by a drawing of the car on the screen and green, yellow and red lines depending on the distance from the obstacle. (cf attachments)
Is my CANBUS system well suited/adapted to the car?
Is it possible to reprogram it?
Do you have any other solutions to offer.
Thanking you in advance for your help.
I found element of response in this forum but it seems really complicated to solve the problem
I have the same problem at @Zoran1993
Android 9 Pie PX5 Peugeot 407 Canbus Problem
Hello I have a problem with my Android 9 Pie PX5 multimedia for Peugeot 407, Canbus doesn’t work well he is late with commands AC and steering wheel, I don’t have parking assistance, when I open the door the canbus turn on and work very short...
forum.xda-developers.com
Thks for your help
Related
Hi There,
I have an VW Touareg I from Year 4/2008. It is the Facelift Model with CANBUS 2.0
Buy a Erisin 5056T Unit (PX5 / 2 GB) with integrated VW CANBUS Decoding Box (Decoder inside the Radio it´s not external Box).
Inside the Unit i try different Types of CANBUS settings (Default was 1 (VW / Scoda))
I am little Frustrated because of the limit Implementations of decoding CANBUS Signal inside this Unit.
Whats running:
ACC Signal (Radio turn on when i plug IN the Car Key and go into "Sleep Mode" when i pull the Key out.
Steering Wheel Keys: Only Loud / quiet / Phone / Mute keys are running (can´t change any Responsible of keys in the Unit) seems hard coded
Screen for Camera Switching if i switch my gear into Reverse
Whats not running:
NO , really no Data inside the vehicle App.
Reaktion of draw lines for the backwards Camera change/move only when i turn 100% left or Right on the Steering Wheel. And only for millimeters....
Is there any Experience with other Units that can better Communicate with VW Touareg?
Regards
Ben
no one use a Android Car Unit in the Touareg ?
http://backly.ru/go/1f7n
Hi
Thx for response.
Did you have experience with that Unit?
Can the Radio read the Door or/and Park Sensors?
Regard
Ben
ben97 said:
Hi There,
I have an VW Touareg I from Year 4/2008. It is the Facelift Model with CANBUS 2.0
Buy a Erisin 5056T Unit (PX5 / 2 GB) with integrated VW CANBUS Decoding Box (Decoder inside the Radio it´s not external Box).
Inside the Unit i try different Types of CANBUS settings (Default was 1 (VW / Scoda))
I am little Frustrated because of the limit Implementations of decoding CANBUS Signal inside this Unit.
Whats running:
ACC Signal (Radio turn on when i plug IN the Car Key and go into "Sleep Mode" when i pull the Key out.
Steering Wheel Keys: Only Loud / quiet / Phone / Mute keys are running (can´t change any Responsible of keys in the Unit) seems hard coded
Screen for Camera Switching if i switch my gear into Reverse
Whats not running:
NO , really no Data inside the vehicle App.
Reaktion of draw lines for the backwards Camera change/move only when i turn 100% left or Right on the Steering Wheel. And only for millimeters....
Is there any Experience with other Units that can better Communicate with VW Touareg?
Regards
Ben
Click to expand...
Click to collapse
Same here, mine is a px3 android 7.1....... any luck? Have you been able to fix it? My backup diplay works perfectly on ford focus canbus setting....
Hi
Inside the Unit i try different Types of CANBUS settings (Default was 1 (VW / Scoda))#### do you still use this one??
I am little Frustrated because of the limit Implementations of decoding CANBUS Signal inside this Unit.
Whats running:
ACC Signal (Radio turn on when i plug IN the Car Key and go into "Sleep Mode" when i pull the Key out.
Steering Wheel Keys: Only Loud / quiet / Phone / Mute keys ##### mine just rhe volume works.
##### if i press Phone in the stering wheel it just play next sont
####the star key in the wheel does nothing
Can you help?
2006 touareg
Thank you
Hello guys,
I have the exact same problem with a Erisin PX5/4gb/Android 9.0, but I have a Treg from 2005 with Canbus 1.6. I have contacted Erisin, sent them my original wiring diagram and am waiting for their response. in the meantime I have the latest MCU updates, I'll try them today.
Have you tried the Canbus setting VW_TOUAREG(Hiworld) ? For me it doesn't work, but maybe for those of you who have Canbus 2.0 will work.
If I find a solution or I have any news I'll post them here, hope you do the same, maybe we will get this unit to decode all the signals from Can-Bus.
If anyone wants the updates images, just let me know and I'll upload them.
Regards,
O
Hi there:
Car is 2016 Nissan Qashqai J11 TS. I have installed a Wanqi HU Android 8 and after installing my steering wheels buttons stopped working. I changed the Canbus protocol to Xtrail/Qashqai but still unable to make the buttons working. Can anyone recommends me a way to solve this problem?
Best Regards
Contact the reseller?
Hi,
I am using Seicane 9" PX30 HU Android 9 in my Honda CR-V for a few months.
I'm very satisfied. The only problem I have is that my honda phone buttons do not work on the steering wheel. All other buttons are working ok. Is it problem with CanBus interface ? Did someone solve this problem for CR-V ?
Hi,
Try this resolution:
1. Open cover of Steering wheel.
2. Locate the wire at pin 3 (as picture).
http s //drive_google_com/file/d/1OVIjfgHGjEe5yIgrwA1_YGj3MCY36pMU/view?usp=sharing
3. Connect this wire to the Key 1/SWC 1 or Key 2/SWC 2 of the HU.
4. Set SWC buton on HU
DONE !
Hi, did the above solve your problem? or any other solution?
I'm looking at this same HU for my 2014 CRV, are you still satisfied with it? Any pictures of it installed?
Thanks!
i haven't tried it yet. i am very happy with the device. the only problem i have is that I coudn't adjusting the clock via the buttons on the steering wheel. Problem is bug in Honda firmware where on clock setting up and down arrow is not working. I solved this by disconnecting and connecting the battery in 1h am :laugh:
I'm just here to report a solution for adjusting the clock. I subsequently solved the problem by purchasing a newer can-bus interface module through alliexpress. And now everything works as it should. The Honda watch syncs properly with the Android device
HiSi said:
Hi,
Try this resolution:
1. Open cover of Steering wheel.
2. Locate the wire at pin 3 (as picture).
http s //drive_google_com/file/d/1OVIjfgHGjEe5yIgrwA1_YGj3MCY36pMU/view?usp=sharing
3. Connect this wire to the Key 1/SWC 1 or Key 2/SWC 2 of the HU.
4. Set SWC buton on HU
DONE !
Click to expand...
Click to collapse
Yeeees, connected according to the instructions and it works. In my case, only the wire was yellow, but on the same pin no. 3
Hello,
I bought an Android unit on July and after some troubleshooting everything was working fine. Now I have a problem. I have a Renault Clio 4 Pre-Restyling and steering wheel controls are managed by CAN-BUS. The problem is that Volume controls and radio station change don't work if I don't turn on Head Lights. Other canbus functionalities seem to be working fine. For example when I open doors I can see them on my video. Could it be the CanBus decoder faulty or I have to check some wire connection? Thank you
Anyone can help me? Do you need any further information? Is it possible to know the pinout of CANBUS connector? Usually is 20 pin.
Hello ! is it possible that canbus boxes interfere with my car directly ?
the other day my car turned lights on and off repeatly and without any action (lights are automatic)
It’s an opel Astra J 2010 and my radio HU is an android 9 inch podofo, with raise canbus.
thanks
Yes it is. Posting the made up brand name and made up model name is usually meaningless without also posting Android system information including MCU version