Wanqi HU - Steering Wheels Buttons Problem - Android Head-Units

Hi there:
Car is 2016 Nissan Qashqai J11 TS. I have installed a Wanqi HU Android 8 and after installing my steering wheels buttons stopped working. I changed the Canbus protocol to Xtrail/Qashqai but still unable to make the buttons working. Can anyone recommends me a way to solve this problem?
Best Regards

Contact the reseller?

Related

BT problem with Seicane Android HU for HONDA CR-V 2015

Hi,
I am using Seicane 9" PX30 HU Android 9 in my Honda CR-V for a few months.
I'm very satisfied. The only problem I have is that my honda phone buttons do not work on the steering wheel. All other buttons are working ok. Is it problem with CanBus interface ? Did someone solve this problem for CR-V ?
Hi,
Try this resolution:
1. Open cover of Steering wheel.
2. Locate the wire at pin 3 (as picture).
http s //drive_google_com/file/d/1OVIjfgHGjEe5yIgrwA1_YGj3MCY36pMU/view?usp=sharing
3. Connect this wire to the Key 1/SWC 1 or Key 2/SWC 2 of the HU.
4. Set SWC buton on HU
DONE !
Hi, did the above solve your problem? or any other solution?
I'm looking at this same HU for my 2014 CRV, are you still satisfied with it? Any pictures of it installed?
Thanks!
i haven't tried it yet. i am very happy with the device. the only problem i have is that I coudn't adjusting the clock via the buttons on the steering wheel. Problem is bug in Honda firmware where on clock setting up and down arrow is not working. I solved this by disconnecting and connecting the battery in 1h am :laugh:
I'm just here to report a solution for adjusting the clock. I subsequently solved the problem by purchasing a newer can-bus interface module through alliexpress. And now everything works as it should. The Honda watch syncs properly with the Android device
HiSi said:
Hi,
Try this resolution:
1. Open cover of Steering wheel.
2. Locate the wire at pin 3 (as picture).
http s //drive_google_com/file/d/1OVIjfgHGjEe5yIgrwA1_YGj3MCY36pMU/view?usp=sharing
3. Connect this wire to the Key 1/SWC 1 or Key 2/SWC 2 of the HU.
4. Set SWC buton on HU
DONE !
Click to expand...
Click to collapse
Yeeees, connected according to the instructions and it works. In my case, only the wire was yellow, but on the same pin no. 3

PX5 Steering Wheel controls

Hello,
I bought an Android unit on July and after some troubleshooting everything was working fine. Now I have a problem. I have a Renault Clio 4 Pre-Restyling and steering wheel controls are managed by CAN-BUS. The problem is that Volume controls and radio station change don't work if I don't turn on Head Lights. Other canbus functionalities seem to be working fine. For example when I open doors I can see them on my video. Could it be the CanBus decoder faulty or I have to check some wire connection? Thank you
Anyone can help me? Do you need any further information? Is it possible to know the pinout of CANBUS connector? Usually is 20 pin.

[Help] PX6 RK3399 Steering Wheel Controls & Dash Board 2013 Ford Fiesta ST

Hi all,
Recently had an Android 10 PX6 RK3399 Head Unit installed into my 2013 Ford Fiesta ST. Everything works great on the HU itself, however, the buttons on my steering wheel for volume up/down and skipping tracks do not work. Also, the physical buttons on the Sony System (also volume up and down etc) under the screen do not work either.
I have checked all my Canbus settings and they are the correct ones for my CanBus decoder. I have also checked with the supplier and they said that it is the correct decoder for my vehicle. I am unable to map these buttons because they are not registering in any mapping program. I have checked factory settings and nothing there seems to change anything.
Any ideas on how to fix this? Could it possibly be that the Canbus decoder is not working?
CanBus Decoder: FD-SS-05A
Model: PX6
Android Version: 10
Build Number: RK3399
MCU Version: MTCE_MX_V3.57_2
Images: https://imgur.com/a/OA86sVR https://imgur.com/a/12ks1gN
Thank you

OWNICE K7 C970 TS10 STEERING WHEEL

Hello MY radio not work steering wheel. I have set correct MCU for my car have enter in apk steering wheel for setting button but not work. Please help me?
Same for me. I heard that you need to connect key 1 or key 2 to ground. Tried it and still it does not work for me... Anyone here that solved that problem?
@sergente78 Did you solve it, yet?
If anyone has any suggestions on how we can fix the steering wheel settings, please write.
I have a TS-10 Android screen installed in my Nissan X-Trail and I am experiencing an issue with my steering wheel button. It is double jumping when I click the next song, selecting the third song instead. How can I fix this issue?

Loss of reversing beeps with Android PX6

Hello,
By installing a PX6 car radio on a 2006 Peugeot 407 coupé, I lost the following functions; Back-up beep forward and Back-up beep back.
The reversing beeps are materialized by a drawing of the car on the screen and green, yellow and red lines depending on the distance from the obstacle. (cf attachments)
Is my CANBUS system well suited/adapted to the car?
Is it possible to reprogram it?
Do you have any other solutions to offer.
Thanking you in advance for your help.
I found element of response in this forum but it seems really complicated to solve the problem
I have the same problem at @Zoran1993
Android 9 Pie PX5 Peugeot 407 Canbus Problem
Hello I have a problem with my Android 9 Pie PX5 multimedia for Peugeot 407, Canbus doesn’t work well he is late with commands AC and steering wheel, I don’t have parking assistance, when I open the door the canbus turn on and work very short...
forum.xda-developers.com
Thks for your help

Categories

Resources