Hello to everyone
I have updated my android radio unit YT576b and since black screen, I would like to know if anyone knows the procedure to go to the recovery menu by pressing the reset button.
Related
Hey guys,
I have a Galaxy S4 LTE (GT-I9505) and I'm currently at the official 4.4.2 (XXUFN88).
Yesterday I was listening to music and my volume started to go down by itself. I has annoyed me but ok. Today, at the morning, I've noticed that my volume down button wasn't working. So I restarted my phone. So the phone went to the recovery screen. Volume up to flash a rom or down to cancel. I tried so hard but none of the options were available.
After a few tries I succeed to enter in safe mode by turning on my mobile with the volume up pressed. At the safe mode I noticed that the volume up was normally working.
I thought that it could be a hardware issue. Then I head to a place to have this fixed. But after opening the phone we noticed that everything was alright. The technical assistance told me that the problem was at the software. Ok, I came home to reset the s4.
I did a factory reset through safe mode but the problem is still here. Now I'm planning to reflash the rom with Odin, but since I can't choose 'continue' at the recovery screen I don't know what to do.
Please help me. Thanks in advance.
por2guex said:
Hey guys,
I have a Galaxy S4 LTE (GT-I9505) and I'm currently at the official 4.4.2 (XXUFN88).
Yesterday I was listening to music and my volume started to go down by itself. I has annoyed me but ok. Today, at the morning, I've noticed that my volume down button wasn't working. So I restarted my phone. So the phone went to the recovery screen. Volume up to flash a rom or down to cancel. I tried so hard but none of the options were available.
After a few tries I succeed to enter in safe mode by turning on my mobile with the volume up pressed. At the safe mode I noticed that the volume up was normally working.
I thought that it could be a hardware issue. Then I head to a place to have this fixed. But after opening the phone we noticed that everything was alright. The technical assistance told me that the problem was at the software. Ok, I came home to reset the s4.
I did a factory reset through safe mode but the problem is still here. Now I'm planning to reflash the rom with Odin, but since I can't choose 'continue' at the recovery screen I don't know what to do.
Please help me. Thanks in advance.
Click to expand...
Click to collapse
[ATUALIZATION] Hey guys. I had no answer but here I am again.
I'm trying so hard to fix this problem. Now I'm pretty sure that my problem is software related. Just because when I turn on my phone it goes automatically to download mode (and i should been pressing power volume down and menu for that). And if i press volume up it goes to safe mode (but for that i should been pressing volume down and power insted).
Do somebody know how can I accept the option "CONTINUE" at the download screen with volume buttons unresponsive? I do really want to reflash the ROM and check if it works.
por2guex said:
[ATUALIZATION] Hey guys. I had no answer but here I am again.
I'm trying so hard to fix this problem. Now I'm pretty sure that my problem is software related. Just because when I turn on my phone it goes automatically to download mode (and i should been pressing power volume down and menu for that). And if i press volume up it goes to safe mode (but for that i should been pressing volume down and power insted).
Do somebody know how can I accept the option "CONTINUE" at the download screen with volume buttons unresponsive? I do really want to reflash the ROM and check if it works.
Click to expand...
Click to collapse
Can you not use the up button to loop around to continue then select it with power ?
11calcal said:
Can you not use the up button to loop around to continue then select it with power ?
Click to expand...
Click to collapse
No. When it reaches the Download screen any buttons work.
See, I found another guy with the same problem. Another evidence that it's software related: http://forum.xda-developers.com/showthread.php?t=2678489
Hello! I hope I'm in the right place.
I bought a quad core, android 4.4.4 headunit from AliExpress. It worked fine for a week, and then suddenly it stopped working and is stuck in the car logo at boot.
i.imgur.com/RQLg2Gv.jpg
Is there anything I can do? or did I just lose $350?
You need to try to get into recovery and wipe data, there's instructions in the Q&A thread it's usually a combination of holding power button and pressing the RST button with a paper clip.
dave5777 said:
You need to try to get into recovery and wipe data, there's instructions in the Q&A thread it's usually a combination of holding power button and pressing the RST button with a paper clip.
Click to expand...
Click to collapse
I tried the RST + power button, but all it does it reboot the system, and goes back to getting stuck, it doesn't enter recovery mode.
As long as you didn't flash anything it should have recovery some units are tricky to get into recovery. https://youtu.be/Vtfwfh0Olu4
Did anyone find a solution to this because mine is stuck with the exact same issue
Hello,
I need some guidance. I flashed the latest version of malaysk ROM. Unfortunately both recovery and the rom give me a blank screen. I know the screen works because I see the malaysk logo when I attempt to go into recovery.
I am presuming I could use a PC and fastboit mode, but how is this fine on an android head unit.
I have a 1 din, flip screen type, KLD5, RK3188 model.
Please help me.
There seem to be a lot of units flashed with the latest rom that have lost the bootloader and recovery.. I'm not seeing any fixes for this. Has anyone fixed a unit that is now stuck at the bootloader with no recovery possible?
Sent from my SM-G928F using Tapatalk
I did not try it, but this might work:
Holding the power button while turning on the unit will get you into bootloader mode. **This is battery power not acc power** The screen will be black but plugging in a usb to the front usb will prompt the PC to install the RockChip bootloader drivers - this might help http://www.cnx-software.com/2013/11...install-rockchip-usb-drivers-in-windows-xp78/
(From http://forum.xda-developers.com/wiki/Hui_Fei_Type#Bootloader_mode)
I don’t have a power button on my HU, I wonder if the RST button or the smaller reset button above would work?
Sent from my SM-G928F using Tapatalk
Hello there,
I have been a reader of XDA for many years but this is the first time I'm at a loss...
I have this radio: Seicane S088713 but with the T3 processor. Sorry I cannot post links (I'm a newbie!) but you can see it if you search for "9 inch 2004-2008 Chrysler Aspen 300C Android 6.0"
I managed to root it with Kingroot and all seemed fine for a while but I must have deleted something by mistake and now the unit is stack on the android screen.
Any idea how to enter recovery mode? The radio does not have any buttons or reset pin.
Also tried the Alt+PrtSCr+i but all I manage to get is the unit to reboot.
Any ideas? I have looked a fair bit of info on this particular radio but there's no much on it.
Have you find the way to get into recovery mode in the meanwhile?
I have a seicane with allwin T8, would also love to know how to enter recovery mode, if there even is one lol.
Recovery - worked for me
Did you repeatedly hit the "i" while holding the "alt + prnt scrn" buttons?
Even after the first boot screen starts?
It takes a little patience and practice if it will work at all.
If you have a poweroff button, just push it for quite some time and then push again and wait for the head unit to start, it should start right on the recovery menu after that.
I've only tried it once, and it did.
Hope you'll get there too.
i bought new px6 head unit from eunavi and i wants to update but it not recognized all my sd cards so i want try to flash the firmware from the recovery mode but don't know how enter to recovery try press long reset with and without the power button not working for me anyone know what i need to do?
baster72 said:
i bought new px6 head unit from eunavi and i wants to update but it not recognized all my sd cards so i want try to flash the firmware from the recovery mode but don't know how enter to recovery try press long reset with and without the power button not working for me anyone know what i need to do?
Click to expand...
Click to collapse
Select system update in settings or try Malaysk MOD App which forces the device to boot into the recovery, but actually the update should be detected from the android system itself
MajinBoo17 said:
Select system update in settings or try Malaysk MOD App which forces the device to boot into the recovery, but actually the update should be detected from the android system itself
Click to expand...
Click to collapse
hi Guys,
he has an STM32 MCU and there is no mod / boot installer!
they are only for MTCD / E devices.
Kind regards. guenni0501
just connect a keyboard on BACK SIDE USB it is important front side doesnt work connect via backside usb press ctrl+alt+del device will restart than rapidly pres i key while holding alt + printscreen pray god for me