hi
i do mistake
i flash firmware does not match to my tablet with TWRP
and my tablet after that is dead (no screen- black screen ,no power, no recognize usb)
what i can do with this
What can i do ?
Related
When returning to stock from custom rom(cloudy g3) I accidentally bricked my g2(d802).
Every time I only get the start of the bootanimation(the lg logo) and then the screen turns black(with backlight, with sometimes there flashes a bit of the other part of the bootanimation, almost thougt it was haunted or so) and the status led flashing as usual.
I tried to restore via download mode with the lg mobile support tool and with the lg flash tool, but strangely the progress on my phone and pc didn't match (it ends with my pc still on 80% and the phone already rebooting into the same state).
Even strange is, my pc recognises the phone most of the time and thinks it has the latest software. I also can't power of the phone or perform a hard reset/reboot to recovery.
What can I do to recover my phone if still posible(I only have it for maybe a week or 2 )
Hello everyone
I have an strange problem with this device. I have a bootloop but with a red screen after the logo. I flash a new firmware with Odin but it still do the bootloop, I can only enter in Odin Mode, not recovery. If I want to charge it when I plug in the device appear the battery pict but it does the same bootloop. And the same if I want to go to recovery mode... What can I do with this problem?. I didn't find anything...
Thanks
What did you do in the device before the problem happenned ?
Black Screen = BL/Kernel
Red Screen = EFS/CAL
Maybe you were playing with Qualcomm QPST/EFS Professional.
Where to begin, well I'll start with the most pressing issue. While flashing the oldbootloader it was disconnected from the USB (USB cable needs to be held a certain way for it to conect to the tablet) and froze on the bootloader screen so I held both the power and volume down buttons to reset it. The problem is that now I'm stuck with a black screen however when I plug the tablet into my PC it makes the noise to notify my that there is a device plugged into it but it doesn't recognize the nexus. I was restoring the tablet because it switched of yesterday for no reason then began to bootloop when I turned it back on so I went into cwm recovery and got the "E:Can't mount" error. That is what led me to restore the tablet and how I got here, with a black screen nexus that connects to PC but isn't recognized an can not be booted into recovery mode. Can anyone help or is this hopeless?
Also the device was running 4.4.4 kitkay and was rooted before all of this.
Hi Guys,
I got my G2 back from my brother who have not using it for a while.
1st day it was working. I plan to install Lineage or custom ROM today...thats when the issue start:
1: it wont go to recovery mode. Even thou I have rooted and install latest TWRP it will only boot to Hardware control key screen, only this screen and wont boot to the OS it will be stuck on LG logo forever....
2: tried to go to Download mode....the same It will go to the same hardware control key only....
3: when I plug in to my PC it wont turn off, keep on restarting after I press the power button for a while.... only if no cable connected I can totally turn it off...
For a noob like me....looks like my G2 D802 is brick :crying: ...any suggestion?
PS: windows detect it( As below picture ), off at all when I plug in AC.....It Will just show the LG logo and the LED just flashing non stop until I pull out the cable and turn it off...
This is what shown on the laptop No Disk1/2/3/4/5 of sort showing on the Device Manager and on the phone each time I try to go recovery or download mode belowh happen:
https://flic.kr/p/QH2HzE
https://flic.kr/p/2bs67ne
Update 1: I found out why the phone was brick. Seems like my Brother ask his friend to install Lineage 15.1 on the it. After everything is verified ok. He wipe and try to flash the rom in TWRP but.....it failed and suddenly just freeze and turn off the screen. Maybe bad ROM download or some step miss....so now the Phone has NO OS and would not boot to anything only the Hardware Key Management....that's all....help? Need the phone as 2nd phone for company lines....dont wanna take the iPhone 6 from my boss....
help?
Hi
I'm facing a problem with my tablet. It shut down after official update and gets a bootloop. I'm not able to get into recovery mode beacuse when I press power+vol up it gets stuck on Lenovo logo. I was able to enter a fastboot mode so I decided to flash ROM. I tried official Lenovo assistant and Qfil + Many roms (stock, dumps from other users) but I always gets a bootloop. I can't turn off a tablet, because it turn on by itself and gets into bootloop until battery dead. What is a cause? How to fix it?
Update: I leave it plugged in to PC via USB cable and after many bootloops my PC shows tablet as a hard drive (I was shocked). Then tablet shows animated Lenovo screen, then Lenovo screen with Snapdragon and finally on screen I saw menu with language selection. My joy was short, because right after choosing language I get a information: Battery temperature is to low. Charging has been stoped" Then tablet shut down again and goes to many bootloops until it will turn on again with the same information. Is this a battery problem?