Related
Hello,
I have a pb with my acer Iconia.
The tablet is blocked on the screen "Android" ...
I tried the button "reset" but nothing better ...
Is there a way to make a hard reset (factory reset) with a combination of buttons ?
Thanks a lot !
PS : My Acer Iconia Tab is "rooted".
Try holding the power key down till the unit shuts off, then let go and hold it down again till it restarts. Good luck.
I've found holding the volume button closest to the corner and power button at the same time forces a restart. Of course, I haven't tried just holding down the power button alone when it's frozen, so the volume button may not be necessary.
I am having the same problem with mine. My widgets started acting weird and disappearing. I thought a reboot might help but now it gets stuck on the Android load screen. I have tried hard reset and holding volume up during reboot. The latter takes to a recovery boot but seems to search on the SD card which doesn't really help. Acer tech support is absolutely worthless and it is too late to return to best buy so now I have to ship it to acer for service. Sucks.
Try this. Plug in a usb keyboard and power on while holding volume down. Keep holding both buttons until you see clearing cache in the upper left and you can then enter a menu by hitting HOME on the keyboard. There is an option to do a factory reset. You will lose all user data by doing this factory reset of cache and data but it may just get your tablet back. There are some other posts on this in dev if you search. Good luck.
maybe.you,both have a bad app that is causing this
try comparing installed apps .might.find what is the.cause
_motley said:
Try this. Plug in a usb keyboard and power on while holding volume down. Keep holding both buttons until you see clearing cache in the upper left and you can then enter a menu by hitting HOME on the keyboard. There is an option to do a factory reset. You will lose all user data by doing this factory reset of cache and data but it may just get your tablet back. There are some other posts on this in dev if you search. Good luck.
Click to expand...
Click to collapse
I did this and it will boot now but during setup the setup wizard FCs and starts over. I checked the Dev sections and I didn't see anything on factory resets? I'm running out of options.
I would try a couple times to boot since cache has been cleared, sometimes it will fix itself after the programs have a chance to JIT compile...it is typical in Android to see some FCs after the cache is cleared. If after a couple boots things aren't working their way out then you may have to flash a system image for your build, however this shouldn't be necessary unless you rooted and changed some stuff like uninstalled system apks etc.
What I did before the factory reset was replace the whole /system/app folder ( that I deleted some bloat ) with one that was complete like stock. I got a bunch of FCs, followed by a black screen. So I followed the steps you provided because the symptoms fit.
I've also done multiple restarts and the setup wiizard is still FCing.
this is my build Acer_A500_1.104.02_COM_GEN1 doubt this will help me.
daswahnsinn said:
What I did before the factory reset was replace the whole /system/app folder ( that I deleted some bloat ) with one that was complete like stock. I got a bunch of FCs, followed by a back screen. So I followed the steps you provided because the symptoms fit.
I've also done multiple restarts and the setup wiizard is still FCing.
Click to expand...
Click to collapse
If I were you (note the disclaimer), I would find and flash the complete system.img file for your build (see the [Dev] System Images thread). Once you have the proper system.img for your build in hand, then you can write the system partition in it's entirety. You can find examples of this in the same dev thread.
Cliff's notes:
Use adb to connect via usb and place the the system.img into /mnt/sdcard (adb push command), or you can do this another way if you have access to your storage via USB. It will take some time to copy, several minutes at least.
You will need root to do the rest, but obviously you already do if you overlaid system/apps. Using the adb shell as su, mount the partition as writable and use the dd command within the adb shell to restore the system partition. It will take several minutes to write, so don't panic.
Here is an example of the dd command if your .img is called system.img in /mnt/sdcard:
>adb shell
# su
# dd if=/sdcard/system.img of=/dev/block/mmcblk0p3
# reboot
do i need to try adb i cant get my android market to load it force closes every time, i wished i could just load an factory image from older version and then let it grab the updates and start from fresh, i am rooted which may have been a mistake. i can hook an usb keyboard up hold home key get into recovery but if i put an rom.zip on sd card it doesn't see it.....what am i doing wrong.
Hi There,
I have also the problem that when I booting my tablet it stucks on the Android logo. I have tried to hook up an usb keyboard but he can´t find him. I get the Androidman with a note of exclamation.
Can someone tell me where I did go wrong? If I try it I see the cache messages etc. in het left corner.
My tablet is not rooted.
if you want to do hard reset first of all make sure you have an appropriate upate.zip on you external sd-card preferably use a stock rom.
after you do volume+ (up) and power once it vibrates keep your finger on volume + and toggle the screen switch few times. then let it go it will update.
Thank you for your answer.
I have searched for a update.zip and I have download and ecrypt this file: Acer_A500_1.104.02_1.141.07_COM_GEN1_1305615165779_f0150ee4
If I put this file on my SDcard I still get the androidman with the ! in it.
Jznwlnl said:
Thank you for your answer.
I have searched for a update.zip and I have download and ecrypt this file: Acer_A500_1.104.02_1.141.07_COM_GEN1_1305615165779_f0150ee4
If I put this file on my SDcard I still get the androidman with the ! in it.
Click to expand...
Click to collapse
That file is an incremental update and is ONLY for updating FROM 1.104.02 TO 1.141.07.
If your version doesn't match exactly, the update will fail. You'd be better off grabbing one of the 3.1 OTA updates in the thread in the dev section, as these are full ROMs.
I have tried the HC 3.1 ROM. This ROM was 487 mb but I still get the Androidman with the ! in it.
I have tried the file: Acer_A500_4.010.38_COM_GEN1.
The other files were 47mb
Reformat your SD card, or try a different one.
Locked at the android screen
_motley said:
Try this. Plug in a usb keyboard and power on while holding volume down. Keep holding both buttons until you see clearing cache in the upper left and you can then enter a menu by hitting HOME on the keyboard. There is an option to do a factory reset. You will lose all user data by doing this factory reset of cache and data but it may just get your tablet back. There are some other posts on this in dev if you search. Good luck.
Click to expand...
Click to collapse
I have a similar problem. Tried this and was able to do factory reset. However, after that, the same.The tablet is still stuck on the screen "Android" ...
During factory reset, I noticed the following messages on the screen:
E:/dev/block/mmcb1k1 does not exist
E:/dev/block/mmcb1k1 does not exist
E:/dev/block/mmcb1k1 does not exist
E:/dev/block/mmcb1k1 does not exist
E:failed to mount/sdcard
E:can't mount/mnt/sdcard/update.zip
What does this mean? Is there a way to fix it?
Somebody, please help! Thank you!
http://forum.xda-developers.com/showthread.php?t=1276227
Try step 2
Also, advice for a hard reset.
Hi folks,
Have tried following the advice below, downloaded: Acer_A500_4.010.38_COM_GEN1.
Added it to my SD card and then tried to boot whilst holding volume down.
It seems temperamental. Sometimes the Android with the ! appears and there's no progress bar. Sometimes the Android with the ! appears and there is a progress bar, but it never makes it past 25%.
I've tried formatting my SD card and redoing it but no joy.
Any suggestions?
Cheers.
Restoring of brick Huawei U8800.
All do at your own risk! I am not responsible for your machines!
Today I was able to magically (just wonderful, because it found the time at which there is a chance to run the update) to recovery from a brick Huawei U8800 (corrupted bootloader + recovery not run + in a pink screen not mounted hard drive + when trying to update the written Update failed! I spoke to a service center, they said the warranty is not the case and we must change the motherboard (the cost of 3-4 million BYR, new at the MTS salon cost 2.9 million BYR )
What and how I did:
1) To restore I'am using the firmware B162 Android.
2) Format the micro SD card that was clean (I was 8 gb, 2 class and be sure to FAT 32) and unpack "dload" folder and ".txt" file(with a strange name) from the downloaded archive to sdcard.
P.S. I say that not all flash drives can operate restore, I have like three went, normally only one.
3) Insert the micro SD into the phone and pull out the battery.
4) Hold down the Volume (+) and power up, hold and connect the phone via cable to your PC, your phone will be switched on and the logo appear, then turned off my phone (missing logo). So, when the logo will disappear (ie the phone will turn off) and immediately hold down the volume (-) the volume (+) and power up.Main that the updating process can start only one time after the logo was gone, if after a few times in a row press both the volume keys and power up, updating does not start, it is necessary to re-clamp the volume (+) and the power up, after the disappearance of the logo, both the volume and the power up of ... I have to go to the upgrade process if you wrote "Update failed!", try again (I went with 2 times).
5) After a successful update, the phone will reboot, on reboot he should loaded the standard blue recovery.
6) Turn off the phone from the computer, insert the battery, hold down the volume (-) the volume (+) and turn on, wait until you get a pink screen, release the button and connect it to your computer. You should see a new device and to define a disk drive with a folder "image". If we define - rejoice!) If not, then you need to install the driver on the internet enough to the driver, as well as the wood in my going to the Android SDK, not sure ...
7) Thus, we can assume the phone repaired) Download recovery 4.0.0.5 and unpack the archive and copy the file "recovery.img" to a folder "image" with the replacement. A man does not 4.0.0.5 recovery loaded, it is strange, but recovery 5.0.2.7 normally loaded
8.) Disconnect the phone from the computer, pull out / insert the battery and try to enter the recovery (volume (+) and power up).
9) If set, then everything is OK and can now be sewing. I still put 2.2 Geno v8.4 + software package from Google, but I recommend again read all instructions on the firmware, to avoid problems!
Good luck, hope that helped someone, he sat on the forums more than one day, but have not found a solution.
If someone has turned out, a sign of gratitude you can throw money on my phone +375297176005 (MTS, Belarus), would be very grateful
P.S.
Instructions is my and it's my first, that do not copy and paste, you can search the Internet. Do not judge strictly, if something is not designed ...
If there are people who helped, I think you can throw his hat in the description. My message is also present in our 4pda.
Hope springs eternal
Sorry for my english, I'm from Belarus and bad know it
Before the restoration, can you open your phone? Mine was completly down. I can't power on or go to recovery or install any official roms.
Özgürce said:
Before the restoration, can you open your phone? Mine was completly down. I can't power on or go to recovery or install any official roms.
Click to expand...
Click to collapse
my phone is also not included, only in
a pink boot screen, but on the computer the drive was
not detected
Please, if someone came to restore, write
greeshan said:
Please, if someone came to restore, write
Click to expand...
Click to collapse
omg, this looks so sad, I guess we are in the same page. BRICK phone. no power, no screen no nothing... well, actually no, it vibrates when battery is inserted or cable is connected, but, other than that, niente.
I had follow all ur instruction but when i press volume up + power with usb connected it goes to the CWM...so i just press vol up + down + power...It goes PINK SCREEN...Any more solution please?
i did it! but after 5 times i see this message: "update failed"
i have the same problem
r0y123 said:
i have the same problem
Click to expand...
Click to collapse
Hello, I have a problem after changing recovery.img. Now after power on only error message: Image signature verify fail. Your boot/recovery image may have an incorrect signature. Please update your image to a signature official one. You can remove battery for power down.
When I get to pink screen - no disk appears in my PC. Please, what can I do now?
greeshan said:
Please, if someone came to restore, write
Click to expand...
Click to collapse
My update process stops at 1/4 of the bar.What can i do?
greeshan said:
my phone is also not included, only in
a pink boot screen, but on the computer the drive was
not detected
Click to expand...
Click to collapse
Just thought I would mention it, if you connect the pink screen to Ubuntu/Linux, it will most likely mount.
Just tried this recovery method on a bricked U8800. Didn't do anything at all. Must admit that it was bricked in a way that i didn't see anything at all on the screen. Neither did i notice anything in dmesg on a linux machine.
Help
Hello.my huawei u8800pro v.2.3.5 brick after install official ice cream sandwich.I followed the procedure and now I have a new removable but I can't go to recovery mode!!can I install a new rom?
Hi, right I have damaged my S4 with water to the extent that when I switch it on all of the writing is pink and the touchscreen is unusable. I am trying to hard reset it as I am going to sell it as a damaged handset. The problem I have is i'm trying to reset through the volume up, home and power key method to access the recovery menu. When it goes into recovery, the screen then has a series of white lines running from top to bottom and nothing is readable on the screen. Any suggestions as to how I can reset this so I can remove Facebook, Gmail and other account details?
If you are able to get the recovery menu (stock), steps for factory reset are:
Vol.down x3
Power
Vol.Down x7
Power
after a few second press Power again to reboot.
If the screen is totally unreadable and recovery is not usable you can try via Kies. Connect the phone via USB, open Kies and from Tools menu choose Firmware Upgrade and Initialization.
Zanna said:
If you are able to get the recovery menu (stock), steps for factory reset are:
Vol.down x3
Power
Vol.Down x7
Power
after a few second press Power again to reboot.
If the screen is totally unreadable and recovery is not usable you can try via Kies. Connect the phone via USB, open Kies and from Tools menu choose Firmware Upgrade and Initialization.
Click to expand...
Click to collapse
I never thought about using Kies actually, I'll give that a try tonight after work and see if I can do it through there. I take it the whole pink writing and unusable touchscreen is something that is not likely to sort itself out after further drying out?
Hard to say with this type of accident but if I had to bet I would put my money on "definitely dead".
Try the recovery menu also, if you are able to get the recovery menu means that Volume keys and power are working, you should be able to reset your phone from recovery.
Good luck
[NVidia Shield 2017 model]
After yesterday's update restart, to Android P, my unit stuck on bootloop (10+hrs).
I'm now unable to get past it, or get into bootloader (ie A+B after Plug-In & Control Buzz).
At this point, I'd like to do a Factory Reset if possible.
I have access to a computer if it'll help.
Thanks
UPDATE (10/3/19)
I worked through this Guide for the SHIELD Pro a number of times.
Couldn't get past the broken robot screen. Going to try updating my Windows Driver and try again later. Will update.
(sorry. I haven't hit my 10 post min in order to post links)
UPDATE (10/4/19)
I've got a somewhat Parallel Thread going here discussing my Troubleshooting Steps:
https://www.nvidia.com/en-us/geforce/forums/shield-tv/9/321317/bootlooped-since-android-p-adb-fastboot-questio/
Same sort of issue. I read over at geforce forum, somebody installed OK, then stuck. Somebody asked if they had SD card in, and to try to remove and restart. Sounds dodgey, as the card is formatted as part of the system configuration now.
Stevio2 said:
Same sort of issue. I read over at geforce forum, somebody installed OK, then stuck. Somebody asked if they had SD card in, and to try to remove and restart. Sounds dodgey, as the card is formatted as part of the system configuration now.
Click to expand...
Click to collapse
I had a cluster of hd's connected to mine at the time ... Could be related?
I tried the suggestion, and removed my USB hub as well, and it didn't work. When I do get back in I'll have to see if doing that has trashed my system or app configuration.
However, I did discover in a thread below mention of a thread to do with the boot loader, and some instructions on his to get into it.
https://forum.xda-developers.com/showpost.php?p=80234203&postcount=10
(BTW: I am using my TV internal smart TV functions and players instead at the moment , and the picture with my pushed profile looks way better than on the shield. Yet another way they let us down. This might be the last shield when it dies, and I stopped recommending it, and may start recommending not to buy. Just one update promoted issue after another going on for an extreme long time, and just poor interface and system app design, as well as disabling my track pad and no Linux support. The system is nowhere near what it could be.)
How far are you guys getting when booting up?
Mine's the multicolored android animation before it forms the word.
Still Fastboot then broken Robot Screen for me ...
ezekieljesus said:
Still Fastboot then broken Robot Screen for me ...
Click to expand...
Click to collapse
So you are getting into the bootloader?
Are you pressing recovery by any chance when there?
edit: found this
Factory Reset SHIELD TV When You Are Unable to Access Android Settings
SHIELD TV 2017
1. Restart your SHIELD TV in Fast Boot mode. Instructions can be found here
2. Use the X and Y buttons on the controller to move to "Boot recovery kernel".
3. Press the A button to select "Boot Recovery Kernel".
4. You may see the dead Android robot on screen. This is expected behavior. If so, press B button on the controller.
5. You will see Android Recovery Menu.
6. Use the X and Y buttons on the controller to move to "wipe data/factory reset".
7. Press the A button to select "wipe data/factory reset".
8. After process select "reboot system now".
8. SHIELD will boot to home screen.
SHIELD Pro or SHIELD TV (2015)
1. Turn off your SHIELD.
2. Unplug the power cable from your SHIELD.
3. Connect your SHIELD to your PC/Mac/Linux computer via USB using SHIELD's micro USB port.
4. Plug the power cable back into your SHIELD.
5. Wait 2 seconds, and then hold the NVIDIA power button on SHIELD for 5-6s until you see the fastboot menu on the display.
6. Tap on NVIDIA button to move on Menu to "Boot recovery kernel".
7. Hold NVIDIA button to for 2-4s to select "Boot Recovery Kernel".
8. You may see the dead Android robot on screen. This is expected behavior.
9. Hold NVIDIA button to for 2-4s to process to next menu. If you don't see the Recovery menu, try this step a few times.
10. You will see Android Recovery Menu.
11. Tap on NVIDIA button to move to "wipe data/factory reset".
12. Hold NVIDIA button to for 4-6s to select "wipe data/factory reset".
13. After process select "reboot system now".
14. SHIELD will boot to home screen.
mLgz0rn said:
So you are getting into the bootloader?
edit: found this
Factory Reset SHIELD TV When You Are Unable to Access Android Settings
Instructions can be found here
Click to expand...
Click to collapse
Thanks, that's one of the links I wasn't able to post initially.
I've since moved the question, including current pursuits, to the page linked under my last update above.
NVidia has kindly resolved the issue with me since.
Good luck everyone, and thanks for the assists.
-z
So I hadn't tried to flash a ROM on my "tube" Shield TV 2019 until the Experience 9 ROMs just leaked. I didn't realize it didn't have a USB port. I have been flashing ROMs on Android phones for over a decade, so I'm good there but what about Fastboot access via network TCP/IP or UDP? I was able to ADB to the Shield with "ADB connect [IP address]" but Fastboot doesn't see the unit at the same IP and I've looked on my router's device list and don't see anything. I have the latest 1.4.3 ADB/Fastboot tools.
So no access to flashing using the SD card slot, ethernet, or network?
THANKS!
KeepingItCuttingEdge said:
So I hadn't tried to flash a ROM on my "tube" Shield TV 2019 until the Experience 9 ROMs just leaked. I didn't realize it didn't have a USB port. I have been flashing ROMs on Android phones for over a decade, so I'm good there but what about Fastboot access via network TCP/IP or UDP? I was able to ADB to the Shield with "ADB connect [IP address]" but Fastboot doesn't see the unit at the same IP and I've looked on my router's device list and don't see anything. I have the latest 1.4.3 ADB/Fastboot tools.
So no access to flashing using the SD card slot, ethernet, or network?
THANKS!
Click to expand...
Click to collapse
I'm sorry, this is slightly off topic, but consider it a bump. haha. A quick question. Do you have a link for the experience rom? I would love to look at it, or do you know what OS they are rolling?
Hello,
trying to do the same but fastboot mode is as far as I get as well. Any ideas on how to flash the image on the tube?
@jenneh
Here you go . The OS is Android 11
KeepingItCuttingEdge said:
So I hadn't tried to flash a ROM on my "tube" Shield TV 2019 until the Experience 9 ROMs just leaked. I didn't realize it didn't have a USB port. I have been flashing ROMs on Android phones for over a decade, so I'm good there but what about Fastboot access via network TCP/IP or UDP? I was able to ADB to the Shield with "ADB connect [IP address]" but Fastboot doesn't see the unit at the same IP and I've looked on my router's device list and don't see anything. I have the latest 1.4.3 ADB/Fastboot tools.
So no access to flashing using the SD card slot, ethernet, or network?
THANKS!
Click to expand...
Click to collapse
Well I figured it out. First copy the downloaded image to the external sd card of the tube. Then:
When you reboot to fastboot using wifi ADB, then first unlock the bootloader.
Then choose "Boot recovery kernel" from the menu. The power button is located above the HDMI port on the tube.
When the dead android image appears, press the power button for 3 seconds and then release.
You should see the recovery menu. If you still see the dead android, then repeat the process by holding the power button pressed for 3-4-5-6 seconds. It can be tricky.
Once in the menu, choose the sd card.
Choose the file.
The process will start. and it should complete after a couple of minutes.
You are then done.
I did some extra steps:
I performed a factory reset and cleared cache from the recovery menu, although this happens automatically when you unlock the bootloader.
I then got back to the fastboot menu and locked the bootloader again. Otherwise you get a warning every time you boot the device.
Be ware that locking/unlocking the bootloader, erases the data of the user partition and the device needs to be setup as from a factory reset. This is by design.
Here is a link with all the images.
Cheers
m33ts4k0z said:
Well I figured it out. First copy the downloaded image to the external sd card of the tube. Then:
When you reboot to fastboot using wifi ADB, then first unlock the bootloader.
Then choose "Boot recovery kernel" from the menu. The power button is located above the HDMI port on the tube.
When the dead android image appears, press the power button for 3 seconds and then release.
You should see the recovery menu. If you still see the dead android, then repeat the process by holding the power button pressed for 3-4-5-6 seconds. It can be tricky.
Once in the menu, choose the sd card.
Choose the file.
The process will start. and it should complete after a couple of minutes.
You are then done.
I did some extra steps:
I performed a factory reset and cleared cache from the recovery menu, although this happens automatically when you unlock the bootloader.
I then got back to the fastboot menu and locked the bootloader again. Otherwise you get a warning every time you boot the device.
Be ware that locking/unlocking the bootloader, erases the data of the user partition and the device needs to be setup as from a factory reset. This is by design.
Here is a link with all the images.
Cheers
Click to expand...
Click to collapse
First of all, THANK YOU for this share~ ~! secondly, would you happen to have any idea why my usb ports have stopped working all of a sudden. I swear I didn't step on the shield this time. Lol
m33ts4k0z said:
he menu, choose the sd card.
Choose the file.
The process will start. and it should complete after a couple of minutes.
You are then done.
I did some extra steps:
Click to expand...
Click to collapse
m33ts4k0z said:
Hello,
trying to do the same but fastboot mode is as far as I get as well. Any ideas on how to flash the image on the tube?
@jenneh
Here you go . The OS is Android 11
Click to expand...
Click to collapse
false alarm Sir!!! I plugged my mouse in where the usbc cord usually goes, and i have access back! i was about to go return this sield to bestbuy for the 5th time for another hahaha
I want to go back from Android 11 to Android 9. It is possible to download a ROM for Shield 2019 Non Pro 8GB ATV 8.2.3? THX
There are links to the recovery firmware 8.2.3 but I can't get past the agree button that shows when klicking on the link..
It could be my old laptop.. but here's the link..
Gameworks Download Center
Get the latest Gameworks software for your game development work.
developer.nvidia.com
Sinse the update most of my aps are gone or not usable..
I can not fint the shield on my network.. and there is no installable apk showing up in any file manager.
I wil do my best to get back to android 9.
Tried to go back using the 8.2.3 recovery img.. but no luck.
I get an error saying cant flash over newer firmware.
Ugg... I didn't see this post that you can't downgrade until I tried it myself and also got the error.
Anybody have any possible work around ideas?
The same here:
The method I used is the one below according to nvidia's instructions:
Hardware Method:
- Disconnect power cable
- Connect power cable to SHIELD and hold down the remote locator button
- Release the keys once you see the fastboot menu on the screen (it's
red in color)
- If the standard boot process starts, disconnect the power cable and
repeat
the process
*******************************************************************************
FASTBOOT MENU NAVIGATION
*****
Once in fastboot mode (it's red in color), navigate the menus using the
remote locator button on the device.
Short press to navigate and long press for ~2s to select.
*******************************************************************************
FLASHING THE DEVICE
*****
To flash the recovery image to your SHIELD from fastboot, download the
image package.
- Download the image package. Copy the same downloaded zip file with
name
'nv-recovery-image-shield-atv-2019_.zip' to a uSD card that is FAT32
formatted
(where corresponds to the image version of the update being
installed).
Insert uSD card into the uSD card slot on the device
- in fastboot mode select Factory Data reset (opp in Recovery menu
scegli wipe data/factory reset)
- Enter recovery kernel by selecting the option "Boot recovery kernel"
from fastboot menu
- Once the device boots into recovery kernel, you will see a "No
command" image on the
screen
- Long press the remote locator button for ~2s and release button.
Recovery menu should show up (it's blue and green).
If not, please try to long press the button again
- On the recovery menu, select the option "apply update from SD card"
(navigate using short
press of remote locator button and long press ~4s to select and
release button)
- From the SD card contents, select the image package
- At anytime if the display goes back to the "No command" picture, press
the button for ~2s and release button
to go back to the previous screen
- Once the image is selected, the update process should start
Unfortunately the process interrupts with "newer build ....error status
7". I deleted the first two rows of UPDATE-SCRIPT, repacked in ZIP and
reflashed but in vain!! the error was:"Signature failure"
I also use SIGNAPK to sign the new ZIP, but in vain....
Any help?
Does anybody found solution to force downgrade (2019 nonPRO of course)?
Hello, I have a device that at this moment, after a failed update, ended up blocking..Now I turn it on, I feel that the nvidia heats up, but I don't have a signal on the television or anything, I've tried to do a reset but I haven't been successful because I am unable to enter to the fastboot screen... Does anyone who has gone through the same problem have any tips? Any help would be nice...Thanks
kuki68ster said:
Hello, I have a device that at this moment, after a failed update, ended up blocking..Now I turn it on, I feel that the nvidia heats up, but I don't have a signal on the television or anything, I've tried to do a reset but I haven't been successful because I am unable to enter to the fastboot screen... Does anyone who has gone through the same problem have any tips? Any help would be nice...Thanks
Click to expand...
Click to collapse
This is exactly what's happening to me. For some reason the network stopped working. I tried to see what happens if I factory reset. After the factory reset the device no longer displays anything. It does turn on and I can turn the tv and receiver on and off with the shield remote. I can enter the bootloader though.
Is this a coincidence or did the latest update screw something up?