Hello
Having a real tough time with this one.
Issue: Samsung Galaxy SM-J120W - Stuck in FRP. Can not sign into a google account. Phone is not rooted.
Does anyone have a walk-through solution for this specific device?
Any assistance is much appreciated
Thank You
Samsung J120W FRP fix
I had the same issue. I fixed with odin and a download of the phones stock firm ware. I put the firmware .tar in the CSC section in Odin
i'm having issues with bypassing... does the odin method still work? could swear i tried it... what version rom should i download?
vibespredah said:
i'm having issues with bypassing... does the odin method still work? could swear i tried it... what version rom should i download?
Click to expand...
Click to collapse
Any luck?
I'm dealing with the same scenario. I've researched a bit and found many instructions impossible to execute.
Plenty of the methods that are supposed to work seem contorted and overly complicated.
I'm scratching my head, wondering why it isn't a straightforward process involving flashing from download mode.
It's just gotta be that simple. As it is the unit I'm dealing with won't recognize from adb, so I'm limited.
IMO the info pointing to a solution is somewhere in a sea of malware and ad-laden apps and sites, now that having a custom ROM is more commonplace with the non-programmer end-user.
You can use Miracle Box. It can bypass FRP but if you want use this program, you must have a Miracle Box dongle.
yes odin method does still work but dont forget you need to do each step in the correct order and if it doesn't work and you try again you must CLOSE odin, unplug the phone then re-start odin and do the steps again
---------- Post added at 11:50 PM ---------- Previous post was at 11:35 PM ----------
vibespredah said:
i'm having issues with bypassing... does the odin method still work? could swear i tried it... what version rom should i download?
Click to expand...
Click to collapse
it does still work but dont forget if you try and fail and want to try again you must close odin, unplug your phone and then re-start odin and follow the steps.
as for what version you need to download that would depend on your carrier - that said - i downloaded and flashed the one for rogers canada and it worked even though im with chatr so the carrier may not matter so much? here are a couple of the canadian versions you can look for
Canada rogers - J120WVLU1APC8 - RWC
Canada Sasktel - J120WVLU1APC8 - BWA
Canada Telus - J120WVLU1APC8 - TLS
help
i have this same problem if anyone can help me i would really appreciate it i have a samsung j120w with chatr so i believe its the telus firmware i need
found a couple threads and thanks to this site i am confident i will be able to unlock this device using odin or twrp or a combination of the two im not sure i will follow the instructions and repost here i see the key to skipping the frp is On your phone, Open Settings > Developer options > Enable OEM unlock and Enable USB debugging.
hopefully this will go smooth thanks to all of you
i cannot access the phones menus as it is stuck at the 'enter your previous email screen'
cannot access the phones internal memory so i cannot put twrp on there. in recovery mode it wont access the sd card i tried placing it there as well. sending it with adb gets a blocked custom binary by frp lock error.
any help would be appreciated i spent 7 hours on this last night and got nowhere
I think the easiest way is to enable Settings >Developer Options > Enable the option OEM Unlock. This will allow the device to be OEM unlocked.
How to enable Developer Options:
Got to Settings > About Device > Software Info > and tap on Build Number 5 times, it unlocks the Developers options..
arvinderss said:
I think the easiest way is to enable Settings >Developer Options > Enable the option OEM Unlock. This will allow the device to be OEM unlocked.
How to enable Developer Options:
Got to Settings > About Device > Software Info > and tap on Build Number 5 times, it unlocks the Developers options..
Click to expand...
Click to collapse
i am stuck at the google frp lock i cannot get into the phone any other suggestions?
Can we resurrect this coffin or should I start another thread?
I need to bypass FRP. Not familiar with android whatsoever but was able to fumble through ODIN flashes unsuccessfully. (Got PASS but FRP is still there).
No idea what possessed me to do it (it was late), I unchecked "OEM Unlock", and bricked my phone.
(Android 5.1.1, stock recovery, rooted)
It's stuck in a bootloop with the red message "Custom binary blocked by FRP lock."
I've read many other posts stating that flashing stock firmware will unbrick the phone. That's great, the hardware can be saved. But I need the data; contacts, txts, photos.
What are my options?
Is there any way around FRP lock? I understand tit's intended as a security feature, and basically only happens when people do idiot stuff like unchecking OEM Unlock. So I doubt many devs/hackers have put much focus on developing workarounds.
Theoretically, Samsung may have the capacity to unlock the FRP lock. Is this a thing? Does anyone know anything about sending it to a Samsung tech center? Probably they would have difficulty guaranteeing the phone sender should have rightful access to the phone, so perhaps they provide no pathway?
@ashyx, I've read your posts, you're frankly a wizard. Any thoughts? Thanks
Frustrated with myself,
- Scott
ScottHW said:
No idea what possessed me to do it (it was late), I unchecked "OEM Unlock", and bricked my phone.
(Android 5.1.1, stock recovery, rooted)
It's stuck in a bootloop with the red message "Custom binary blocked by FRP lock."
I've read many other posts stating that flashing stock firmware will unbrick the phone. That's great, the hardware can be saved. But I need the data; contacts, txts, photos.
What are my options?
Is there any way around FRP lock? I understand tit's intended as a security feature, and basically only happens when people do idiot stuff like unchecking OEM Unlock. So I doubt many devs/hackers have put much focus on developing workarounds.
Theoretically, Samsung may have the capacity to unlock the FRP lock. Is this a thing? Does anyone know anything about sending it to a Samsung tech center? Probably they would have difficulty guaranteeing the phone sender should have rightful access to the phone, so perhaps they provide no pathway?
@ashyx, I've read your posts, you're frankly a wizard. Any thoughts? Thanks
Frustrated with myself,
- Scott
Click to expand...
Click to collapse
As advised flash the stock firmware. DATA won't be affected.
ashyx said:
As advised flash the stock firmware. DATA won't be affected.
Click to expand...
Click to collapse
Really? Many posts I've seen have noted that "all user data will be deleted".
Do I just use ODIN, and flash AP? No app, or user data will be erased, or formatted like that?
A few mention "Initializing with Smart Switch"; I haven't done that before. Is that different than flashing firmware?
ScottHW said:
Really? Many posts I've seen have noted that "all user data will be deleted".
Do I just use ODIN, and flash AP? No app, or user data will be erased, or formatted like that?
A few mention "Initializing with Smart Switch"; I haven't done that before. Is that different than flashing firmware?
Click to expand...
Click to collapse
Searching for that question directly, it seems like flashing a ROM (e.g. stock firmware) will not directly erase user data; downloads, photos in DCIM, etc.
But, sounds like any user-installed apps will be erased (so any internally stored data would be lost).
And, data stored in system apps would be lost, too; e.g. tabs that were open in Chrome.
There's no way around the FRP lock, eh?
Here is Samsung's statement about FRP (Factory Reset Protection)
It describes the Google account "protection" features, but doesn't really describe how FRP lock leads to bootloops.
https://www.samsung.com/us/support/frp/
Factory Reset Protection (FRP) Feature
What is Device Protection, or Factory Reset Protection (FRP)?
Android devices provide built-in security features you can use to protect your device and information, including screen locks and data encryption. Data protection, or Factory Reset Protection (FRP), is a security feature on Android devices with Lollipop 5.1 and higher.
FRP is automatically activated when you set up a Google Account on your device. Once FRP is activated, it prevents use of a device after a factory data reset, until you log in using a Google username and password previously set up on the device.
How does FRP work?
When you perform a Factory Data Reset, all settings are returned to the factory default settings. All data is erased, including files and downloaded apps.
If you have a Google Account set up on the device, FRP is active. This means that after the reset, you'll be required to log in to the Google Account using the username and password. If you have multiple Google Accounts set up on the device, you can log in using any of the accounts.
If an unauthorized person tries to reset the device by another method, the device would still require log-in using the Google username and password. This means that if your device is lost or stolen, another person would not be able to reset it and use it.
What do I need to know about FRP?
If you want to reset your device to factory defaults, make sure you know your Google Account and password, because you'll need to log in at the end of the reset.
If you want to reset your device to factory defaults, but don't remember your Google username and/or password, you can do one of these:
Check your devices Account settings for your account name, and reset your password via the device or at www.google.com.
It can take 24 hours for the password reset to sync with all devices registered to the account.
Remove the account before you reset the device.
If you already reset your device, but don't remember your Google username and/or password, the device can't be used. In that case, you can do one of these:
If you know your Google username but can't remember the password, you can reset your password on the device, or at www.google.com. It can take up to 24 hours for a new password to sync with all registered devices. After 24 hours, you can try logging in to your phone with the new password.
If you have multiple Google Accounts, and you can't remember which Google Account you set up on your device, visit https://www.google.com/android/devicemanager.
Log in with your Google username and password and check the list of devices registered to the account. If you don't see the device listed on the account, it means the device is registered to a different account. Use the same process to check for devices linked to your other Google Accounts. When you find the registered account, use it to log in to your device.
If you can't remember any of your Google Account information, you can send your device, along with proof of purchase, to an authorized Samsung Service Center. Samsung has special tools to reset the phone to factory defaults with no protection enabled.
Click to expand...
Click to collapse
Looking for a Samsung Authorized Support Center, apparently there are ZERO listed around Omaha, NE.
http://support-us.samsung.com/cyber/locator/asc_locator.jsp
There must be ASC's somewhere; I'm hesitant to mail the phone away because I think the tech will just wipe it. The whole point is to maintain the data :-/
What do I need to flash to remove "Custom binary" ?
Will flashing the bootloader back to stock unlock the FRP lock?
That's BL throuh ODIN, right?
Do I have to flash AP ?
Won't that remove all user apps and their data, and any user data associated with system apps?
ScottHW said:
What do I need to flash to remove "Custom binary" ?
Will flashing the bootloader back to stock unlock the FRP lock?
That's BL throuh ODIN, right?
Do I have to flash AP ?
Won't that remove all user apps and their data, and any user data associated with system apps?
Click to expand...
Click to collapse
Not being funny, but you're panicking over nothing. I can pretty much guarantee you will NOT lose any data, apps or settings. The DATA partion is untouched by stock firmware.
Just flash the whole stock firmware(not repair firmware) and you'll be fine.
If you're super paranoid about losing data then just flash the AP part.
ashyx said:
Not being funny, but you're panicking over nothing. I can pretty much guarantee you will NOT lose any data, apps or settings. The DATA partion is untouched by stock firmware.
Just flash the whole stock firmware(not repair firmware) and you'll be fine.
If you're super paranoid about losing data then just flash the AP part.
Click to expand...
Click to collapse
Thanks for the reassurance. I am pretty paranoid, because I feel like such an ass for making such a dumb mistake.
Will I lose:
Contacts?
Text messages??
Chrome Bookmarks???
My numerous open Chrome tabs?!?!
I'm just trying to understand what's happening, know what I'm doing.
Because I was clearly stupid enough to uncheck OEM Unlock. (WTF was I thinking?!)
ScottHW said:
Thanks for the reassurance. I am pretty paranoid, because I feel like such an ass for making such a dumb mistake.
Will I lose:
Contacts?
Text messages??
Chrome Bookmarks???
My numerous open Chrome tabs?!?!
I'm just trying to understand what's happening, know what I'm doing.
Because I was clearly stupid enough to uncheck OEM Unlock. (WTF was I thinking?!)
Click to expand...
Click to collapse
It will be exactly as it was before. Nothing will change.
There are only 2 binaries that need flashing, boot and recovery, however unless you are flashing the exact firmware you had previously you may get compatibility issues, so it's best to just flash the whole firmware.
ashyx said:
It will be exactly as it was before. Nothing will change.
There are only 2 binaries that need flashing, boot and recovery, however unless you are flashing the exact firmware you had previously you may get compatibility issues, so it's best to just flash the whole firmware.
Click to expand...
Click to collapse
Thanks for the more specific information.
I've never found any discussions about how to solve the frp lock bootloop, with the intention of preserving user data.
If you will indulge me a bit more, I'd like to learn, test, and then share this for others.
Do you know exactly Custom binary blocked by FRP lock ""security" works?
Where is the flag that gets tripped?
In order to solve this bootloop, technically just Boot loader and Recovery need to be flashed (the exact versions must be used, or comparability issues can occur).
Bootloader should be simple enough: BL is one of the specific upload choices in Odin.
Recovery is a .bin that's contained with the AP.tar, correct?
Is it possible to specifically flash only the Recovery?
(I am reading other posts and pages as I write this, sorry if some of these points and questions seem "obvious"; I'm still learning. Aren't we all )
This thread is particularly detailed re: ODIN flashing, although it is from 2013, and for a specific device
https://forum.xda-developers.com/showthread.php?t=2154762
ScottHW said:
Thanks for the more specific information.
I've never found any discussions about how to solve the frp lock bootloop, with the intention of preserving user data.
If you will indulge me a bit more, I'd like to learn, test, and then share this for others.
Do you know exactly Custom binary blocked by FRP lock ""security" works?
Where is the flag that gets tripped?
In order to solve this bootloop, technically just Boot loader and Recovery need to be flashed (the exact versions must be used, or comparability issues can occur).
Bootloader should be simple enough: BL is one of the specific upload choices in Odin.
Recovery is a .bin that's contained with the AP.tar, correct?
Is it possible to specifically flash only the Recovery?
(I am reading other posts and pages as I write this, sorry if some of these points and questions seem "obvious"; I'm still learning. Aren't we all )
This thread is particularly detailed re: ODIN flashing, although it is from 2013, and for a specific device
https://forum.xda-developers.com/showthread.php?t=2154762
Click to expand...
Click to collapse
No, I didn't mention the bootloader, that is a different part of the firmware. The boot and recovery images have a .img extension and should be flashed under AP.
It is the bootloader that detects non official firmware and trips the FRP flag. If it's disabled in settings via OEM UNLOCK the bootloader ignores it and allows the device to boot.
n00b mistake
ashyx said:
No, I didn't mention the bootloader, that is a different part of the firmware. The boot and recovery images have a .img extension and should be flashed under AP.
It is the bootloader that detects non official firmware and trips the FRP flag. If it's disabled in settings via OEM UNLOCK the bootloader ignores it and allows the device to boot.
Click to expand...
Click to collapse
Sh!t, sorry, boot.ing /= bootloader. Rookie mistake. #StillLearning
OK, so boot.img and recovery.img should both be contained within the AP component of stock firmware.
I can just flash those two, can't I?
ashyx said:
No, I didn't mention the bootloader, that is a different part of the firmware. The boot and recovery images have a .img extension and should be flashed under AP.
It is the bootloader that detects non official firmware and trips the FRP flag. If it's disabled in settings via OEM UNLOCK the bootloader ignores it and allows the device to boot.
Click to expand...
Click to collapse
Is there any non-GUI way to toggle the OEM UNLOCK?
Bootloader? Download mode? Recovery? Fastboot? ADB?
I assume not, since that might be a "security" risk. And also, if there were, problems like this would have solutions posted mentioning how to do that.
Sh!!!!!!!t... I was thinking I would have screenshots of the exact build that's loaded on my phone. That way I can find the right stock firmware.
Seems those screenshots are still in the phone, didn't get moved to external memory
All I know for sure is it's Andorid 5.1.1, but that probably isn't specific enough to get the exact right boot and recovery images.
I intend to flash the boot.img and recovery.img to my phone. Hopefully, this will avoid any data loss, while clearing the FRP lock bootloop.
I got the stock firmware for Android 5.1.1 for my Galaxy A3 (2016) (SM-A310M) here:
https://www.sammobile.com/firmwares/galaxy-a3-/SM-A310M/TTT/download/A310MUBU2APE2/73991/
This set of instructions says to extract the .img file(s) to flash, then just .tar them up using 7zip, and flash it as AP in ODIN.
http://howto.highonandroid.com/sams...extract-stock-recovery-from-samsung-firmware/
But... this one says to use Unified Android Toolkit, option ‘8’ (Create an Odin flashable tar), and then flash with ODIN.
https://skipsoft.net/flashing-a-single-partition-i-e-system/
Fortunately, I have a Galaxy A3 (2017) (SM-A320Y), which I was just about to upgrade to for my daily driver. It's blank, running Android 7.0, so it means I can test this process, see if data is preserved, with almost no risk to actual data. Got that firmware here:
https://www.sammobile.com/firmwares/SM-A320Y/COO/download/A320YDXU1BQH2/189605/
Ironically... I don't yet have a great method to intentionally trip the FRP lock bootloop
I think rooting and then unchecking OEM Unlock should do it (that's what wrecked my A310M)
FRP lock - Usb does not recognize
Hi, Everyone!
Sorry my english.
My problem is the same as yours.
however, after this frp lock message appeared, my phone goes into download mode, but the pc does not recognize any more. what can i do to get flash from the rom stock and solve the frp lock problem.
Help me, please!
Thank you all
ScottHW said:
No idea what possessed me to do it (it was late), I unchecked "OEM Unlock", and bricked my phone.
(Android 5.1.1, stock recovery, rooted)
It's stuck in a bootloop with the red message "Custom binary blocked by FRP lock."
I've read many other posts stating that flashing stock firmware will unbrick the phone. That's great, the hardware can be saved. But I need the data; contacts, txts, photos.
What are my options?
Is there any way around FRP lock? I understand tit's intended as a security feature, and basically only happens when people do idiot stuff like unchecking OEM Unlock. So I doubt many devs/hackers have put much focus on developing workarounds.
Theoretically, Samsung may have the capacity to unlock the FRP lock. Is this a thing? Does anyone know anything about sending it to a Samsung tech center? Probably they would have difficulty guaranteeing the phone sender should have rightful access to the phone, so perhaps they provide no pathway?
@ashyx, I've read your posts, you're frankly a wizard. Any thoughts? Thanks
Frustrated with myself,
- Scott
Click to expand...
Click to collapse
FRP Custom binary Lock
ashyx said:
It will be exactly as it was before. Nothing will change.
There are only 2 binaries that need flashing, boot and recovery, however unless you are flashing the exact firmware you had previously you may get compatibility issues, so it's best to just flash the whole firmware.
Click to expand...
Click to collapse
Could you help me to get access to my data? I'm running port of S8 on my S7 and got bootloop. Someone told me that even if I'll flash AP only I might lose my data because of difference in the way the memory is formatted.
Blackion said:
Could you help me to get access to my data? I'm running port of S8 on my S7 and got bootloop. Someone told me that even if I'll flash AP only I might lose my data because of difference in the way the memory is formatted.
Click to expand...
Click to collapse
If they're both stock based firmware then you can just flash the stock S7 firmware. Data should remain untouched.
Hi
I am just stuck with the same problem. I have downloaded the latest Stock ROM. But unsure which options to select in ODIN and what files to select.
I presume only select AP. Also, hope I will not lose any data.
Please help me out.
I want to know that if my Mi A1 is unrooted with no recovery installed, bootloader unlocked and start up pin applied What are the chances that someone(thief) can reinstall rom on it and use it again. I am curious as to whether Android can be as theft proof as apple.?
Extract user data - no, reflash rom and start using the phone - yes (FRP bypass or EDL flash).
_mysiak_ said:
Extract user data - no, reflash rom and start using the phone - yes (FRP bypass or EDL flash).
Click to expand...
Click to collapse
Regarding EDL Flash I read this recent article (https://www.xda-developers.com/xiaomi-anti-rollback-protection-brick-phone/) and it mentions that only authorized service centres has EDL access. Read and share your opinion.
I think FRP bypass may be difficult if the security patch level is latest .
A query although I had reset my A1 several times by going in settings but didn't received the FRP message on Restart. Is it normal
pkrajpur said:
Regarding EDL Flash I read this recent article (https://www.xda-developers.com/xiaomi-anti-rollback-protection-brick-phone/) and it mentions that only authorized service centres has EDL access. Read and share your opinion.
I think FRP bypass may be difficult if the security patch level is latest .
A query although I had reset my A1 several times by going in settings but didn't received the FRP message on Restart. Is it normal
Click to expand...
Click to collapse
EDL mode has been locked for MIUI devices, but Android One can be flashed at home without major issues.
FRP protection is triggered when you perform factory reset from recovery. If you do it from settings, it is assumed that you are the owner of the device. With the existing implementation of FRP, I would not rely on its safety.
It seems that you are not worried about your data safety, so wondering why does it bother you if a thief can use the phone or not..? You have to buy a new one anyway..
_mysiak_ said:
EDL mode has been locked for MIUI devices, but Android One can be flashed at home without major issues.
FRP protection is triggered when you perform factory reset from recovery. If you do it from settings, it is assumed that you are the owner of the device. With the existing implementation of FRP, I would not rely on its safety.
It seems that you are not worried about your data safety, so wondering why does it bother you if a thief can use the phone or not..? You have to buy a new one anyway..
Click to expand...
Click to collapse
Just Curious. Thanks BTW :good: