No idea what possessed me to do it (it was late), I unchecked "OEM Unlock", and bricked my phone.
(Android 5.1.1, stock recovery, rooted)
It's stuck in a bootloop with the red message "Custom binary blocked by FRP lock."
I've read many other posts stating that flashing stock firmware will unbrick the phone. That's great, the hardware can be saved. But I need the data; contacts, txts, photos.
What are my options?
Is there any way around FRP lock? I understand tit's intended as a security feature, and basically only happens when people do idiot stuff like unchecking OEM Unlock. So I doubt many devs/hackers have put much focus on developing workarounds.
Theoretically, Samsung may have the capacity to unlock the FRP lock. Is this a thing? Does anyone know anything about sending it to a Samsung tech center? Probably they would have difficulty guaranteeing the phone sender should have rightful access to the phone, so perhaps they provide no pathway?
@ashyx, I've read your posts, you're frankly a wizard. Any thoughts? Thanks
Frustrated with myself,
- Scott
ScottHW said:
No idea what possessed me to do it (it was late), I unchecked "OEM Unlock", and bricked my phone.
(Android 5.1.1, stock recovery, rooted)
It's stuck in a bootloop with the red message "Custom binary blocked by FRP lock."
I've read many other posts stating that flashing stock firmware will unbrick the phone. That's great, the hardware can be saved. But I need the data; contacts, txts, photos.
What are my options?
Is there any way around FRP lock? I understand tit's intended as a security feature, and basically only happens when people do idiot stuff like unchecking OEM Unlock. So I doubt many devs/hackers have put much focus on developing workarounds.
Theoretically, Samsung may have the capacity to unlock the FRP lock. Is this a thing? Does anyone know anything about sending it to a Samsung tech center? Probably they would have difficulty guaranteeing the phone sender should have rightful access to the phone, so perhaps they provide no pathway?
@ashyx, I've read your posts, you're frankly a wizard. Any thoughts? Thanks
Frustrated with myself,
- Scott
Click to expand...
Click to collapse
As advised flash the stock firmware. DATA won't be affected.
ashyx said:
As advised flash the stock firmware. DATA won't be affected.
Click to expand...
Click to collapse
Really? Many posts I've seen have noted that "all user data will be deleted".
Do I just use ODIN, and flash AP? No app, or user data will be erased, or formatted like that?
A few mention "Initializing with Smart Switch"; I haven't done that before. Is that different than flashing firmware?
ScottHW said:
Really? Many posts I've seen have noted that "all user data will be deleted".
Do I just use ODIN, and flash AP? No app, or user data will be erased, or formatted like that?
A few mention "Initializing with Smart Switch"; I haven't done that before. Is that different than flashing firmware?
Click to expand...
Click to collapse
Searching for that question directly, it seems like flashing a ROM (e.g. stock firmware) will not directly erase user data; downloads, photos in DCIM, etc.
But, sounds like any user-installed apps will be erased (so any internally stored data would be lost).
And, data stored in system apps would be lost, too; e.g. tabs that were open in Chrome.
There's no way around the FRP lock, eh?
Here is Samsung's statement about FRP (Factory Reset Protection)
It describes the Google account "protection" features, but doesn't really describe how FRP lock leads to bootloops.
https://www.samsung.com/us/support/frp/
Factory Reset Protection (FRP) Feature
What is Device Protection, or Factory Reset Protection (FRP)?
Android devices provide built-in security features you can use to protect your device and information, including screen locks and data encryption. Data protection, or Factory Reset Protection (FRP), is a security feature on Android devices with Lollipop 5.1 and higher.
FRP is automatically activated when you set up a Google Account on your device. Once FRP is activated, it prevents use of a device after a factory data reset, until you log in using a Google username and password previously set up on the device.
How does FRP work?
When you perform a Factory Data Reset, all settings are returned to the factory default settings. All data is erased, including files and downloaded apps.
If you have a Google Account set up on the device, FRP is active. This means that after the reset, you'll be required to log in to the Google Account using the username and password. If you have multiple Google Accounts set up on the device, you can log in using any of the accounts.
If an unauthorized person tries to reset the device by another method, the device would still require log-in using the Google username and password. This means that if your device is lost or stolen, another person would not be able to reset it and use it.
What do I need to know about FRP?
If you want to reset your device to factory defaults, make sure you know your Google Account and password, because you'll need to log in at the end of the reset.
If you want to reset your device to factory defaults, but don't remember your Google username and/or password, you can do one of these:
Check your devices Account settings for your account name, and reset your password via the device or at www.google.com.
It can take 24 hours for the password reset to sync with all devices registered to the account.
Remove the account before you reset the device.
If you already reset your device, but don't remember your Google username and/or password, the device can't be used. In that case, you can do one of these:
If you know your Google username but can't remember the password, you can reset your password on the device, or at www.google.com. It can take up to 24 hours for a new password to sync with all registered devices. After 24 hours, you can try logging in to your phone with the new password.
If you have multiple Google Accounts, and you can't remember which Google Account you set up on your device, visit https://www.google.com/android/devicemanager.
Log in with your Google username and password and check the list of devices registered to the account. If you don't see the device listed on the account, it means the device is registered to a different account. Use the same process to check for devices linked to your other Google Accounts. When you find the registered account, use it to log in to your device.
If you can't remember any of your Google Account information, you can send your device, along with proof of purchase, to an authorized Samsung Service Center. Samsung has special tools to reset the phone to factory defaults with no protection enabled.
Click to expand...
Click to collapse
Looking for a Samsung Authorized Support Center, apparently there are ZERO listed around Omaha, NE.
http://support-us.samsung.com/cyber/locator/asc_locator.jsp
There must be ASC's somewhere; I'm hesitant to mail the phone away because I think the tech will just wipe it. The whole point is to maintain the data :-/
What do I need to flash to remove "Custom binary" ?
Will flashing the bootloader back to stock unlock the FRP lock?
That's BL throuh ODIN, right?
Do I have to flash AP ?
Won't that remove all user apps and their data, and any user data associated with system apps?
ScottHW said:
What do I need to flash to remove "Custom binary" ?
Will flashing the bootloader back to stock unlock the FRP lock?
That's BL throuh ODIN, right?
Do I have to flash AP ?
Won't that remove all user apps and their data, and any user data associated with system apps?
Click to expand...
Click to collapse
Not being funny, but you're panicking over nothing. I can pretty much guarantee you will NOT lose any data, apps or settings. The DATA partion is untouched by stock firmware.
Just flash the whole stock firmware(not repair firmware) and you'll be fine.
If you're super paranoid about losing data then just flash the AP part.
ashyx said:
Not being funny, but you're panicking over nothing. I can pretty much guarantee you will NOT lose any data, apps or settings. The DATA partion is untouched by stock firmware.
Just flash the whole stock firmware(not repair firmware) and you'll be fine.
If you're super paranoid about losing data then just flash the AP part.
Click to expand...
Click to collapse
Thanks for the reassurance. I am pretty paranoid, because I feel like such an ass for making such a dumb mistake.
Will I lose:
Contacts?
Text messages??
Chrome Bookmarks???
My numerous open Chrome tabs?!?!
I'm just trying to understand what's happening, know what I'm doing.
Because I was clearly stupid enough to uncheck OEM Unlock. (WTF was I thinking?!)
ScottHW said:
Thanks for the reassurance. I am pretty paranoid, because I feel like such an ass for making such a dumb mistake.
Will I lose:
Contacts?
Text messages??
Chrome Bookmarks???
My numerous open Chrome tabs?!?!
I'm just trying to understand what's happening, know what I'm doing.
Because I was clearly stupid enough to uncheck OEM Unlock. (WTF was I thinking?!)
Click to expand...
Click to collapse
It will be exactly as it was before. Nothing will change.
There are only 2 binaries that need flashing, boot and recovery, however unless you are flashing the exact firmware you had previously you may get compatibility issues, so it's best to just flash the whole firmware.
ashyx said:
It will be exactly as it was before. Nothing will change.
There are only 2 binaries that need flashing, boot and recovery, however unless you are flashing the exact firmware you had previously you may get compatibility issues, so it's best to just flash the whole firmware.
Click to expand...
Click to collapse
Thanks for the more specific information.
I've never found any discussions about how to solve the frp lock bootloop, with the intention of preserving user data.
If you will indulge me a bit more, I'd like to learn, test, and then share this for others.
Do you know exactly Custom binary blocked by FRP lock ""security" works?
Where is the flag that gets tripped?
In order to solve this bootloop, technically just Boot loader and Recovery need to be flashed (the exact versions must be used, or comparability issues can occur).
Bootloader should be simple enough: BL is one of the specific upload choices in Odin.
Recovery is a .bin that's contained with the AP.tar, correct?
Is it possible to specifically flash only the Recovery?
(I am reading other posts and pages as I write this, sorry if some of these points and questions seem "obvious"; I'm still learning. Aren't we all )
This thread is particularly detailed re: ODIN flashing, although it is from 2013, and for a specific device
https://forum.xda-developers.com/showthread.php?t=2154762
ScottHW said:
Thanks for the more specific information.
I've never found any discussions about how to solve the frp lock bootloop, with the intention of preserving user data.
If you will indulge me a bit more, I'd like to learn, test, and then share this for others.
Do you know exactly Custom binary blocked by FRP lock ""security" works?
Where is the flag that gets tripped?
In order to solve this bootloop, technically just Boot loader and Recovery need to be flashed (the exact versions must be used, or comparability issues can occur).
Bootloader should be simple enough: BL is one of the specific upload choices in Odin.
Recovery is a .bin that's contained with the AP.tar, correct?
Is it possible to specifically flash only the Recovery?
(I am reading other posts and pages as I write this, sorry if some of these points and questions seem "obvious"; I'm still learning. Aren't we all )
This thread is particularly detailed re: ODIN flashing, although it is from 2013, and for a specific device
https://forum.xda-developers.com/showthread.php?t=2154762
Click to expand...
Click to collapse
No, I didn't mention the bootloader, that is a different part of the firmware. The boot and recovery images have a .img extension and should be flashed under AP.
It is the bootloader that detects non official firmware and trips the FRP flag. If it's disabled in settings via OEM UNLOCK the bootloader ignores it and allows the device to boot.
n00b mistake
ashyx said:
No, I didn't mention the bootloader, that is a different part of the firmware. The boot and recovery images have a .img extension and should be flashed under AP.
It is the bootloader that detects non official firmware and trips the FRP flag. If it's disabled in settings via OEM UNLOCK the bootloader ignores it and allows the device to boot.
Click to expand...
Click to collapse
Sh!t, sorry, boot.ing /= bootloader. Rookie mistake. #StillLearning
OK, so boot.img and recovery.img should both be contained within the AP component of stock firmware.
I can just flash those two, can't I?
ashyx said:
No, I didn't mention the bootloader, that is a different part of the firmware. The boot and recovery images have a .img extension and should be flashed under AP.
It is the bootloader that detects non official firmware and trips the FRP flag. If it's disabled in settings via OEM UNLOCK the bootloader ignores it and allows the device to boot.
Click to expand...
Click to collapse
Is there any non-GUI way to toggle the OEM UNLOCK?
Bootloader? Download mode? Recovery? Fastboot? ADB?
I assume not, since that might be a "security" risk. And also, if there were, problems like this would have solutions posted mentioning how to do that.
Sh!!!!!!!t... I was thinking I would have screenshots of the exact build that's loaded on my phone. That way I can find the right stock firmware.
Seems those screenshots are still in the phone, didn't get moved to external memory
All I know for sure is it's Andorid 5.1.1, but that probably isn't specific enough to get the exact right boot and recovery images.
I intend to flash the boot.img and recovery.img to my phone. Hopefully, this will avoid any data loss, while clearing the FRP lock bootloop.
I got the stock firmware for Android 5.1.1 for my Galaxy A3 (2016) (SM-A310M) here:
https://www.sammobile.com/firmwares/galaxy-a3-/SM-A310M/TTT/download/A310MUBU2APE2/73991/
This set of instructions says to extract the .img file(s) to flash, then just .tar them up using 7zip, and flash it as AP in ODIN.
http://howto.highonandroid.com/sams...extract-stock-recovery-from-samsung-firmware/
But... this one says to use Unified Android Toolkit, option ‘8’ (Create an Odin flashable tar), and then flash with ODIN.
https://skipsoft.net/flashing-a-single-partition-i-e-system/
Fortunately, I have a Galaxy A3 (2017) (SM-A320Y), which I was just about to upgrade to for my daily driver. It's blank, running Android 7.0, so it means I can test this process, see if data is preserved, with almost no risk to actual data. Got that firmware here:
https://www.sammobile.com/firmwares/SM-A320Y/COO/download/A320YDXU1BQH2/189605/
Ironically... I don't yet have a great method to intentionally trip the FRP lock bootloop
I think rooting and then unchecking OEM Unlock should do it (that's what wrecked my A310M)
FRP lock - Usb does not recognize
Hi, Everyone!
Sorry my english.
My problem is the same as yours.
however, after this frp lock message appeared, my phone goes into download mode, but the pc does not recognize any more. what can i do to get flash from the rom stock and solve the frp lock problem.
Help me, please!
Thank you all
ScottHW said:
No idea what possessed me to do it (it was late), I unchecked "OEM Unlock", and bricked my phone.
(Android 5.1.1, stock recovery, rooted)
It's stuck in a bootloop with the red message "Custom binary blocked by FRP lock."
I've read many other posts stating that flashing stock firmware will unbrick the phone. That's great, the hardware can be saved. But I need the data; contacts, txts, photos.
What are my options?
Is there any way around FRP lock? I understand tit's intended as a security feature, and basically only happens when people do idiot stuff like unchecking OEM Unlock. So I doubt many devs/hackers have put much focus on developing workarounds.
Theoretically, Samsung may have the capacity to unlock the FRP lock. Is this a thing? Does anyone know anything about sending it to a Samsung tech center? Probably they would have difficulty guaranteeing the phone sender should have rightful access to the phone, so perhaps they provide no pathway?
@ashyx, I've read your posts, you're frankly a wizard. Any thoughts? Thanks
Frustrated with myself,
- Scott
Click to expand...
Click to collapse
FRP Custom binary Lock
ashyx said:
It will be exactly as it was before. Nothing will change.
There are only 2 binaries that need flashing, boot and recovery, however unless you are flashing the exact firmware you had previously you may get compatibility issues, so it's best to just flash the whole firmware.
Click to expand...
Click to collapse
Could you help me to get access to my data? I'm running port of S8 on my S7 and got bootloop. Someone told me that even if I'll flash AP only I might lose my data because of difference in the way the memory is formatted.
Blackion said:
Could you help me to get access to my data? I'm running port of S8 on my S7 and got bootloop. Someone told me that even if I'll flash AP only I might lose my data because of difference in the way the memory is formatted.
Click to expand...
Click to collapse
If they're both stock based firmware then you can just flash the stock S7 firmware. Data should remain untouched.
Hi
I am just stuck with the same problem. I have downloaded the latest Stock ROM. But unsure which options to select in ODIN and what files to select.
I presume only select AP. Also, hope I will not lose any data.
Please help me out.
(Soft-)Bricked S7 Edge/G935F with FRP lock & DRK error, but no root/OEM unlock/ADB
Hello guys,
I bought a, what I thought to be, soft bricked S7 Edge (G935F) from the bay. It was listed as having sw issues, so I thought I could easily fix the issue myself. Stupid me, this one really isn't easy to fix. I've tried a lot of different hints that I found meandering around the web, but none of them have proofed working so far. I would appreciate some help because I don't seem to be making any progress.
When I got the phone, it would boot directly into Android Recovery with a dm-verity error on the bottom.
Below is what I have tried already:
1 . First I did the obvious, factory reset and wipe partition. No change.
2. Downloaded the latest firmware with updato (SM-G935F Region DBT) and flashed with Odin. It then booted into a screen with a hazard sign and a DRK error (Device does not have DRK, please install DRK first. press any button). Then returned to Android Recovery with variations of the DRK and dm-verity error messages
3. I flashed the same firmware again. This time the phone booted up to a Samsung error that said to use SmartSwitch's Emergency recovery. I tried but it asks for a recovery code and I don't have one.
4. I used an older version of SmartSwitch which gave me the initialization option where you need to input the device model and SN - SmartSwitch decided not to cooperate and noted that the S7 edge does not support initialization
5. I tried to flash CF-autoroot but it gave an error in Odin and failed because it is "Blocked by FRP Lock". I can't boot normally into android. Any workaround?
6. I used a dm-verity workaround file (G935FXXU1DQC4_FIX_DRK_dm-verity.tar) to actually get the phone booted up- but then it asks for the account information to do away with the FRP lock. And the former owner does not want to give me his login information. In addition, none of the workarounds (bluetooth, modem terminal prompts, etc.) did work.
7. Flashed oldest Android version I could find for the G935F - 5.1.1 - this gave me a prompt right after reboot that looks like the password request for encrypting memory. default_password and variations did not work. I am still stuck with...
No Support SINGLE-SKU
Supported API: 3
dm-verity error...
failed code : 0x02
...in the recovery
8. I flashed the combination file and was able to boot into Factory Binary and used the IMEI recovery option which is supposed to fix also the DRK issue. No luck.
So, this is where I am right now. If anyone out there still has sparks of hope, I would be delighted to hear about them.
Thanks much in advance!
Conversion software and ADB Shell
Small update - I booted into factory mode again using the conversion firmware. This way, I could connect to the device via ADB and use ADB shell. There is a guide (here: https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-check-drk-imei-issues-t3379516) which guides through IMEI recovery using the conversion software and factory mode - that is supposed to also help with DRK issues. Did not work for me.
Another great guide (here: https://forum.xda-developers.com/no...fix-drk-dm-verity-factory-csc-serial-t3422965) used ADB shell to push and repair the DRK with some additional files. Since the device is not rooted, I did not get very far, either.
So, no progress whatsoever.
In summary, I can get the device booted up into factory mode using the conversion firmware, or, by using the dm-verity tweaked firmware, I can end up in the Google Account locked part of the initial start-up settings.
Any ideas?
Have you looked at the process to completely re-do a phone stuck in the Google auth log-in? At least that is how I understand where you are stuck. I have a phone arriving soon that I will need to re-flash to get out of that, via Odin.
JeffDC said:
Have you looked at the process to completely re-do a phone stuck in the Google auth log-in? At east that is how I understand where you are stuck. I have a phone arriving soon that I will need to re-flash to get out of that, via Odin.
Click to expand...
Click to collapse
Hi JeffDC,
Thanks a lot for the reply. How would this process look like? I have flashed the phone with all sorts of variations of Android L, M and N - plus the combination fw and the one with the dm-verity/DRK workaround which at least got the phone booted up. But then I am stuck at the google auth request.
I cannot flash anything custom since the FRP lock is on.
Hence, if there is any other way to re-do the phone as you are saying, I would live to hear about it.
https://forum.xda-developers.com/s7-edge/help/s7-edge-custom-binary-block-frp-lock-t3347688
https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-check-drk-imei-issues-t3379516
https://forum.xda-developers.com/no...fix-drk-dm-verity-factory-csc-serial-t3422965
JeffDC said:
https://forum.xda-developers.com/s7-edge/help/s7-edge-custom-binary-block-frp-lock-t3347688
https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-check-drk-imei-issues-t3379516
https://forum.xda-developers.com/no...fix-drk-dm-verity-factory-csc-serial-t3422965
Click to expand...
Click to collapse
Hi JeffDC,
Thanks a lot for the links.
Link #1: I can flash the file #1 and get the device visible for ADB by using the combination FW before starting the steps. Unfortunately, step #2 does not work due to lack of permissions. I guess because of missing root.
Links #2 and #3: These are the guides I was already referencing in my post #2 - they both do not work due to, I guess, missing root.
Smart Switch initialization
Update: I got smart switch to do the update and initialization for the device. Workaround was to use a different real serial number than the one of the actual device (I can only assume that it has got to do with country presets).
Cool stuff, all went smooth - but, still the same result. The device ends up in recovery showing the dm-verity error (failed code : 0x02) with FRP lock on and no root.
https://forum.xda-developers.com/ve...-factory-reset-protect-unlock-t3414590/page11
Interesting read, particularly ignoring the trojan squabbling.
Uses script and setup files to get around FRP.
I suggest you to re-try flashing with Odin the Stock Marshmallow Firmware. Then Boot Into Stock Recovery do a Full Wipe.
zzThrain said:
I suggest you to re-try flashing with Odin the Stock Marshmallow Firmware. Then Boot Into Stock Recovery do a Full Wipe.
Click to expand...
Click to collapse
Thanks for the recommendation. Done that (MM downgrade and full wipe) - same result, still DRK error only booting to recovery.
JeffDC said:
https://forum.xda-developers.com/ve...-factory-reset-protect-unlock-t3414590/page11
Interesting read, particularly ignoring the trojan squabbling.
Uses script and setup files to get around FRP.
Click to expand...
Click to collapse
Hi JEffDC, thanks for the follow-up hints. Very interesting read and approach. As commented in the other thread, I think the package download link in the opening post is dead. I am also curious to see 2 more complexities in action:
1. Will this work on a G935F variant (Exynos vs Snapdragon)?
2. The only way for me to get to the Google Account prompt is by using the modded dm-verity version mentioned in my first post - but I am not sure I can get ADB access enabled simultaneously
Good luck.
Deleted
Hey sathiere,
Came across this. It apparently removes the FRP before the system can start it up! Let me know what you think. I'm going to try it on a locked Edge next week or two. Seems to go right after the FRP protection file.
https://forum.xda-developers.com/galaxy-s7/help/how-to-bypass-frp-galaxy-s7-possibly-6-t3622126
and the download link works.
JeffDC said:
Hey sathiere,
Came across this. It apparently removes the FRP before the system can start it up! Let me know what you think. I'm going to try it on a locked Edge next week or two. Seems to go right after the FRP protection file.
https://forum.xda-developers.com/galaxy-s7/help/how-to-bypass-frp-galaxy-s7-possibly-6-t3622126
and the download link works.
Click to expand...
Click to collapse
Hi JeffDC, came across that thread last night - checked it out, but cannot really make sense of it just now. I will be posting directly in this one in the next minutes.
Regarding the link for the other thread - the google drive link for me shows invalid/no content...
sathiere said:
Hi JeffDC, came across that thread last night - checked it out, but cannot really make sense of it just now. I will be posting directly in this one in the next minutes.
Regarding the link for the other thread - the google drive link for me shows invalid/no content...
Click to expand...
Click to collapse
Yes, I am hoping for a response to my post there, near the end, clarifying. I think I get the method, and it's really pretty straight forward, really.
sathiere, I think basically what it does is provide two connections to the phone at the same time, one via Odin, and the other via direct ADB.
Step one is to flash a Universal boot loader, which is unlocked or can be unlocked via ADB. Now with the locked boot loader out of the way, on to getting rid of FRP.
Step two is run the. bat file which deletes the Persistence file, which is the Google encrypted setup file/FRP file. BOOM, FRP gone.
Then either stay on the Universal bootloader, or go back and flash the OEM.
Brilliant!
I have the same problem with a sm930f binary 2 boot loader. Stock Rom doesn't start and frp lock. How you fix it ? Thank you
Try this method
https://forum.xda-developers.com/general/general/solved-bypass-frp-lock-drk-error-t3779082
Hi,
I have a Tab A6 SM-t580, had it for a while then stopped using it, decided I wanted to give it to my son to play with, so did a reset by home & Vol Up & power button, then eventually it asks for this google verification, I've never seen this before and I cant remember the email address or password i used at the time because I just create a new random one for each device i have.
I used odin to flash the firmware but same thing
I tried to use odin to flash the root from here - https://forum.xda-developers.com/galaxy-tab-a/how-to/root-t3674409 but that says its blocked the file because of the FRP lock.
Have I totally fooked this now? Do I just have a shiny paperweight?
Thanks
And another T580 falls victim to the FRP lock. If you don't enable Developer's options and OEM enable prior to a factory reset, you'll be required to enter your Google username and password upon first reboot. This is supposed to discourage thieves but it seems legit owners get bit by it more than the thieves. The good news is that you can recover from the disaster. But it isn't easy. Search the Q&A threads for "T580 FRP lock" and you should find the instructions for fixing it.
Thanks for that, I like the anti theft system, but maybe it should display a warning before you commit to the reset. I've done plenty of resets before on my android devices before and never seen this
A warning would also alert the thief not to reset. I know some people want more than one Google account and can forget what account they used on a given device. But I think the answer to this would be to allow some method of associating one's account to a main account that could be used to see what logon and passwords were used on each device. Personally, I use the same account on all devices. I have close to a dozen and if I used a different account on each, I'd never remember them all.
I've sorted it thanks to this post - https://forum.xda-developers.com/galaxy-tab-a/help/samsung-sm-t580-frp-lock-t3619870/
Thanks!!!
I bought a A510F (A5 (2016)) from my company und unfortunately I had to FactoryReset it in recovery, because the telephone PIN was lost. What I was facing was the FRP login-screen (never seen before). No problem I thought, get the google account from my company (with which the phone was initially installed) and I can continue, and I got the password. But there seems to be 2-phase-authorization or google asks for a second authorization step regardless of 1-phase or 2-phase setting (I also can't login to it from my PC without 2. phase). A college of mine also told me (he has one of the 33(!) devices, which are registered at this google account and got a message about my login attempt), that there was no "Yes" button at this message (as described on my locked phone), and the message disapeared very fast. (Can anyone tell me, how this 2-phase-authorization really works? Or is there another way for the second phase of authorization then annoying all my 33 colleges with login attempts?).
The second thing I thougt about, is to flash a combination file to get rid of this frp. But I'm not shure if I found the right one. The version of the stockRom is A510FXXS8CSC2. I know, that the version of bootloader is important. The combination file has the name A510FXXU8ASE1. Now, some people in this forum say "8" is the version of bootloader, other say S8 / U8 are the versions. So if only the digit is the version, I can use the combination file, if it is the mix of one letter and one digit, it doesnt match. I couldn't find a combination file with "S" in the name, all have an "U". Can someone tell me the meaning of this letter. And would this combination file work with my A510FXXS8CSC2 StockRom?
And last not least: will I be able to flash the combination file without having OEM-Unlock on (and FRP off)?
Thanks for reading and thanks for answers ahead.
I forgot: I have tried some other guidances to bypass FRP but none of them work anymore (or are too risky in my eyes). I think the StockRom has a lot of holes fixed meanwhile. Its one of the newest of the German Telekom.
What I forgot to ask. What will happen to the FRP security check after reboot, when I manage to remove the device from the devices list of the Google account? (Maybe from PC login to Googles account settings, look for registered device, find the right one from the 33 (how?) and remove it. I think, I saw such a hint that it could work. And how will be the reaction of the phone? Will it ask to Google, answer would be device is not registered and it lets me continue phone initialisation without FRP security login? Or will the device will be locked forever, because FRP flag is on and there is no account, where it is registered anymore ?
So finally I got it. I tried to flash the A510FXXU8ASE1 Combination file over the installed StockROM A510FXXS8CSC2 and it booted fine. I only switched on the developer options and checked for USB-Debugging on (which already was) and in IME-Preferences (icon like a calculator) I checked for the USB mode with *#0808# . I left ADB+MTP on (which already was). And rebooted to Download-Mode. First and second try gave me an error message (Exception in Bootloader), I booted into Combination Firmware again and made the device shutdown with powerbutton (not reboot) (and I also disconnected USB cable). Then the boot in Download Mode worked.
Now the next problem. I could not reinstall the StockRom A510FXXS8CSC2 (from Sammobile), odin failed after flashing hidden.img. (Maybe someone could explain, whats the reason, StockRoms Bootloader to old? Pit modified by Combination file so that a partition dosn't fits the StockRom? I dont know...)
But the source, where I downloaded den CombinationFile also provided a StockRom (DmRepairTech) and I was able to flash this StockROM. (it started in turkish, so a translater was my friend, look for "gil" in settings, this means language)
I only enabled OEM-Unlock (which disables FRP lock, as far as I know) and then I flashed TRWP-Recovery and LineageOS (which is an android 10 insted of StockRoms android 7 ). Now I'm satified and ready to use the phone.
One question isn't anwered yet: why cant I reinstall original StockRom after CombinationFile...?
May someone will help this approach. Its not based on facts, only trial and error.