Hello there, I've searched on this forum some methods on trying to get out of the boot loop. Someone gave me this tablet and i thought that i would reset the device but it just ended up on a bootloop. I know that this device should probably be thrown out, but maybe there is a chance to use it. If you had a bootloop problem and fixed it or even bricked your a500, would you mind posting the exact thread here for me to read.
The links on this forums were mostly dead so if anyone can give working links please?
Thanks!
johnzebo said:
Hello there, I've searched on this forum some methods on trying to get out of the boot loop. Someone gave me this tablet and i thought that i would reset the device but it just ended up on a bootloop. I know that this device should probably be thrown out, but maybe there is a chance to use it. If you had a bootloop problem and fixed it or even bricked your a500, would you mind posting the exact thread here for me to read.
The links on this forums were mostly dead so if anyone can give working links please?
Thanks!
Click to expand...
Click to collapse
If it bootloops I think the best way is to use an update.zip to reset the device.
Related
hi all i attempted to use the dextor hack and i messed up with the flash all data step i thought it did it but it didnt and then when i went to update and it was done i just get a black screen when i turn on the device i can not even go into recovery mode its just basically lighting up the screen and nothing i am very tech savy so i can do just about what ever i need to just somebody please help me out hours of looking and i cant find a single thing on this
Not Really Sure how much help i can give you seeing as i never seen anyone brick one of theses devices. Im pretty sure you don't a Elocity A7+, from i beleive they aren't available on the market. You should have a regular Elocity A7.
Before you check the link below be very positive you can't get into recovery, sometime it take a little long for it to come up.
Also if the tablet is new you should also think about calling or emailing Elocity to see if it can be replaced.
most of use aren't very active in the Elocity A7 forum of xda, so you may get more help at Tabletroms Forum
I don't no much about Nvflash but you should read into this it may help: http://forum.xda-developers.com/showthread.php?t=1022273
The A7+ has been selling and shipping for the past few weeks, i just got mine delivered today. Now I'm here learning that trying to use the A7- hack might be a bad idea.
a7+ bricked fix
See Destron5683 response for black screen, make sure you use the a7+ update if you bricked your new a7+ trying to upgrade it.
Any advice for following
http://forum.xda-developers.com/showthread.php?p=21109150
and then not being able to access the keyboard? Thats the point I am at currently.
This is an older thread, but assuming you have not tried it, see the recovery information at ElocityNow website:
http://www.elocitynow.com/prod_a7-plus_recovery.shtml
You should be able to get back up and running it the recovery posted in the post above. I got my A7+ stuck in a boot loop when I changed something that I shouldn't have in the build.prop and the PC recovery method worked just fine.
Hey,
I recently became the owner of a bricked Iconia a500 tablet. Beyond that, I don't know much about it and I cannot contact the previous owner...
The situation:
It will boot the the Acer logo, but it doesn't go beyond that.
I've searched this forum (and others) for ways to bring it back to life. A factory reset doesn't seem to do anything at all.
I can boot into recovery mode to load a rom, but cannot find the proper rom. CWM does not seem to be installed. I've looked for stock roms but none seem to work.
When I try and load a rom I will inevitably get a white triangle with an orange exclamation mark inside of it. Next to this is the android man.
I've found a few threads that purpose links to a stock rom, but a lot of them have file shares linked to Megaupload... which is.. well non-existent now.
Again, I can not tell you the anything about the current software.... if you know how I can find out that alone would be a huge help! = )
Many thanks,
Robert
This might be your best luck..
This flashed thru your computer adb.. apx mode..
http://forum.xda-developers.com/showthread.php?p=20680452#post20680452
Hey Erica,
Thanks for you very speedy response!
Well, I read a lot of that thread... lol probably more than I should admit. I followed the procedure but was unable to get a good connection via USB.
I was finally able to get it to register a Factory Reset thanks to that post. Had tried it a few times before... must have not been pressing hard enough?
Either way, it is stuck on Erasing Userdata... and Erasing Cache...
I saw that it was suggested it could be a hardware issue... What is your opinion?
Thanks,
Robert
I still think its a rom issue..
You might could try to download the rom again. and try again.. there is also another thread in the DEV section that does the same thing but differently you could try that or maybe posting there where a TRUE Developer might be able to help you..
I just repeat what i have learned from my own mistakes and read from others..
Sorry im not more help ..
Trust me Erica, you have been a great help! If I find a solution, I will update this thread with it = )
Thanks!
Robert
I'm trying to help this person on reddit but I'm a total noob with the Iconia 500 and after looking at various threads the only conclusion i can come to is APX mode. Could you guys please post a link to the solution or describe them in a noob friendly manner, because I've seen allot of solutions for the APX problem but they're all different, I just wasn't to make sure I find the correct solution for this persons symptoms.
Details-
The Iconia A500 gets to the android logo then nothing.
Attempted update.zip but that doesn't work
Original Reddit post-
Hey, I have an Acer Iconia a500 and it bricked on me. Ive googled the solutions but with no avail. Ive booted in repair mode, ive added an sd card with a new update.zip to the reboot, still nothing. All i get is a little android with an open chest and red exclamation point. Googled the symptoms, but its a really broad subject. I can get it to boot with the SD card for a moment, then a progress bar appears under my dead, open android. The bar doesnt seem to be moving. Im at a loss, could anyone help? Thanks in advance!
http://www.reddit.com/r/Android/comments/1u7rnk/android_tablet_help/
Lekan Adeyeri said:
I'm trying to help this person on reddit but I'm a total noob with the Iconia 500 and after looking at various threads the only conclusion i can come to is APX mode. Could you guys please post a link to the solution or describe them in a noob friendly manner, because I've seen allot of solutions for the APX problem but they're all different, I just wasn't to make sure I find the correct solution for this persons symptoms.
Details-
The Iconia A500 gets to the android logo then nothing.
Attempted update.zip but that doesn't work
Original Reddit post-
Hey, I have an Acer Iconia a500 and it bricked on me. Ive googled the solutions but with no avail. Ive booted in repair mode, ive added an sd card with a new update.zip to the reboot, still nothing. All i get is a little android with an open chest and red exclamation point. Googled the symptoms, but its a really broad subject. I can get it to boot with the SD card for a moment, then a progress bar appears under my dead, open android. The bar doesnt seem to be moving. Im at a loss, could anyone help? Thanks in advance!
http://www.reddit.com/r/Android/comments/1u7rnk/android_tablet_help/
Click to expand...
Click to collapse
No its not stuck in apx mode, just failing to run an update.zip. depends what rom the tab was on and which update.zip was tried.
The solution will require the tabs cpuid so an EUU can be run. If the user does not have a backup of the cpuid and cannot boot into the OS to retrieve it, then it will be no easy fix. Check the cpuid guide in my sig. Linux has to be used unless the user has had the tab connected to his pc at some point then he can use a program called usbdeview to get it. ALL details for these 2 methods are in the cpuid guide.
Once he has the cpuid he can use tge babsector.rar file to reset his tab. This file will install a patched bootloader and custom recovery. All details and download links and instructions are in the root guide in my sig.
He will need full battery charge and a custom ics or jb rom to flash once the babsector.rar file has completed.
As I said this whole process will not be easy. But patience and the ability to follow the steps as they are written will ensure success.
The only thing that may be an issue is if the tab has the dreaded memory chip fault, but babsector.rar file will tell you if this is the case. Acer has recently repaired these faulty tabs even though they were out of warranty.
Good luck
Regards dibb
Sent from my GT-I9300 using Tapatalk
If this is in the wrong section or is inappropriate for this forum please let me know.
well as my title states, I recently started encountering a boot loop after attempting to root my device. As i tend to overreact when my tech gets twitchy I attempted to do a factory restore to remove the custom kernel, but it is still on the device. Is there any other ways to stop the boot loop from continuing? will reinstalling the stock firmware fix my issue? Also, I would like my device to be rooted if possible. I would like to know where I messed up in the process if at all possible. Thanks in advance for your responses!
same still im looking for soloution
Narusada said:
If this is in the wrong section or is inappropriate for this forum please let me know.
well as my title states, I recently started encountering a boot loop after attempting to root my device. As i tend to overreact when my tech gets twitchy I attempted to do a factory restore to remove the custom kernel, but it is still on the device. Is there any other ways to stop the boot loop from continuing? will reinstalling the stock firmware fix my issue? Also, I would like my device to be rooted if possible. I would like to know where I messed up in the process if at all possible. Thanks in advance for your responses!
Click to expand...
Click to collapse
Hey. Most of us have g928c,f,g,i and etc. There is T-Mobile s6 edge+ forum in two next station. I think you can find your way easier than finding it here. Good luck guys.
First time it was bootlooped of death December 14th 2017, i followed squabbi's post https://forum.xda-developers.com/nexus-6p/general/guide-tutorial-nexus-6p-bootloop-death-t3716330 and i fixed it and then in march it bootlooped again. I tried the fix again, nothing. I tried to get in the 808 mode or in Emergency mode, nothing. Tried the custom bootloader, not working. Tried turning off/on the bootloader still nothing. Any help please!
I am having similar issues as well. In my post here I go through the steps I have taken up to this point. Most of the methods listed are from other members here on XDA trying to fix the boot loop.
Currently, I am unable to get past the issue myself but maybe you will have more luck. Try to give some more information though about your situation and others will be able to help you better. How far does boot get? Can you load fastboot? Have you tried a factory reset? Is your bootloader locked/unlocked?
This information will help others help you, good luck to us both man!
Oxika95 said:
I am having similar issues as well. In my post here I go through the steps I have taken up to this point. Most of the methods listed are from other members here on XDA trying to fix the boot loop.
Currently, I am unable to get past the issue myself but maybe you will have more luck. Try to give some more information though about your situation and others will be able to help you better. How far does boot get? Can you load fastboot? Have you tried a factory reset? Is your bootloader locked/unlocked?
This information will help others help you, good luck to us both man!
Click to expand...
Click to collapse
Same as the first bootloop of death just stuck on google logo, i can load fastboot, i did, right now its unlocked and i cant boot to recovery. Thanks for the forum i will see if i can do anything