I am trying to load CoreELEC on my TUREWELL T95 Max. I have been messing around with this box for a few weeks now and I managed to mess it up pretty good. Right now it is stuck the loading screen showing 4 multi-colored swirling dots. This isn't from a CoreELEC image. To be honest I am not sure which one caused this. I have tried a lot. To try to fix this, I have tried to burn the original firmware from the Turewell website but it never boots from the USB or SD. It just goes into this boot screen. I tried holding down the "reset" button in the headphone jack and power the device back on, but it never powers on. It does nothing. I have to unplug and re-plug for it to come back on to the boot screen. I have tried burning the images with Win32DiskImager and Rufus, as well as trying with a SD card and USB. I have attempted to use PhoenixSuite as well with a male to male USB cord but it just says that there is no device connected.
Does anyone have any advice that I can try to get this box working in some capacity? Right now I dont care if it is the original firmware or custom. Thank you so much for your help!
-Josh
***EDIT***
I have attached a screenshot of the boot screen I am seeing for clarity.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi, do you get to fix that issue? My box has the same problem...
Related
White screen what it does mean?
Hi every body
When I turn on my HTC SHIFT , white screen appear in both side (Vista side and SnapVu side) this problem appear after I installed KasperSky internet security 8.0, I tried to enter to boot options (F3) but whit screen still appear and I can't do and thing with it, do you have any suggestion for this critical problem .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can you see the HTC post screen?
aquasesh said:
Can you see the HTC post screen?
Click to expand...
Click to collapse
Thanks aquasesh
but how can I get this screen, do you mean the boot screen, anyway the whit screen is the only screen I can see in my HTC SHIFT, nothing I can do with it
any help
its strange that this problem appears after installing Kapersky.
almost certain, you might have to return it to claim warranty.
However, for now, take the battery out, take the sim card out.
Take the charger cable out.
push the power button for a few seconds without battery.
let it sit for a few min and put the power cable back in. See if you
can get anything this way.
i will install kapersky later and see what happens
Unboxed the packing, Charged the Nook for 3Hrs. It wont turn-on on pressing the power button on the back. I have tried long press for as long as 1min. Still no help.
It just displays Fully charge the device before first use !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It show a green light when connected for charging.
One more thing is that when I connect to the computer, It shows some error USB Notification - "USB Device not recognized".
I have seen a few things about taking the nook apart, I think it would be my last resort. I don't replacement is viable option as I got it shipped to India.
Hoping some one would help me out.
It seems that the charging system/battery has gotten out of whack.
Usually people open the case, disconnect then reconnect the battery.
It could be that the battery is bad too.
It's good that it shows something when plugged into the USB.
What exactly is the unrecognized USB device PID/VID?
Replacement
I thought of taking it apart but it has break seal on the screw. Didn't wanna void warranty .
Thank you for the help ! I just found someone to take it back to the States. B&N will replace the device.
Hello Guys.
I got some problem with my 3.5mm jack, so I decided to order a whole new tape with USB connector and 3.5mm jack port.
http://thumbs2.ebaystatic.com/d/l225/m/mRfGTPTIX7tNp0yCo0_JEmQ.jpg
Got the package with small toolkit to open phone and change this thing by myself.
I've followed instructions from one of many youtube DIY movies.
New parts got installed, everything went pretty well... then closed phone. Turned On... and here I em...
Power button doesnt work, I see no light around the power button, no screen reaction... But I hear that phone turned on because of LG logon sound. Phone reacts while pluged in to charger, USB->PC too.
Attached picture with exact conectors I plugged off while changing parts inside.
Why power button doesnt light up? Why doesnt work? Is there some small connector between power button and the board, because I dont see any, there is a Toshiba Chip just beneath the power button/volume part.
Please help me, give me some advices what exactly could get wrong.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank You for any help.
Sorry in forward for my English...
So I had my G950U in Max Power Savings Mode and dropped it which broke the screen. When I plug in an OTG adapter with monitor output I am able to log into the phone, but MPSM disables the output almost immediately. When I am fast enough to try and disable MPSM I get this error:
"Please reboot device in order to start MPSM"
Any ideas on how I can get it out of power savings mode so I can recover my data?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thadjohnson said:
So I had my G950U in Max Power Savings Mode and dropped it which broke the screen. When I plug in an OTG adapter with monitor output I am able to log into the phone, but MPSM disables the output almost immediately. When I am fast enough to try and disable MPSM I get this error:
"Please reboot device in order to start MPSM"
Any ideas on how I can get it out of power savings mode so I can recover my data?
Click to expand...
Click to collapse
Strange why no nobody ever replied to help you , you could have tried Odin to reflash , or twrp to any custom ROM , ADB and plenty of other stuff to help you strange nobody ever replied ,if you still have that phone try to revive or maybe with time it's also dead.
Hi guys, I just bought and installed this and it took me the whole day. Sadly the unit's screen is not responding to touch. Has anyone experienced this? The buttons to the left don't work either-i would've at least expected those to be responsive.
Whats super weird is the unit does not load. It boots up instantly... Don't these things need load/start up time. It booted instantly as soon as I plugged it in... Thought it would've been a cold start.
I made some videos to help show the problem.
Appreciate any input. As you can see I tried the reset button which is responsive.
I should have mentioned I also tried unplugging and plugging to no resolve as well
You are not holding the pin in the hole for long enough to do a full reset. You have to push the pin in the hole and HOLD IT until the button lights flash, then let go. It takes about 6 to 10 seconds of holding the reset with the pin.
If that doesn't work then there is probably something wrong with the outer touch glass. Maybe it's not fully plugged into the board.
The capacitive glass has a small ribbon connector on it like in the picture. See if that connector is properly plugged in.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}