So I had my G950U in Max Power Savings Mode and dropped it which broke the screen. When I plug in an OTG adapter with monitor output I am able to log into the phone, but MPSM disables the output almost immediately. When I am fast enough to try and disable MPSM I get this error:
"Please reboot device in order to start MPSM"
Any ideas on how I can get it out of power savings mode so I can recover my data?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thadjohnson said:
So I had my G950U in Max Power Savings Mode and dropped it which broke the screen. When I plug in an OTG adapter with monitor output I am able to log into the phone, but MPSM disables the output almost immediately. When I am fast enough to try and disable MPSM I get this error:
"Please reboot device in order to start MPSM"
Any ideas on how I can get it out of power savings mode so I can recover my data?
Click to expand...
Click to collapse
Strange why no nobody ever replied to help you , you could have tried Odin to reflash , or twrp to any custom ROM , ADB and plenty of other stuff to help you strange nobody ever replied ,if you still have that phone try to revive or maybe with time it's also dead.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the way how to unbrick samsung galaxy s
If you have a black screen like the one shown above and you cant boot into recovery and download mode there are three things you need to do:
1. Take Battery out
2. Connect phone to computer
3.Whilst putting battery in press Vol-Down+Power+Home button
This will boot you SGS into download mode and you can just flash a rom with odin
This won't help you if you hardbricked your phone (what usually is defined as not being able to get into download mode at all).
Add "softbrick" in title.
superkoal said:
This won't help you if you hardbricked your phone (what usually is defined as not being able to get into download mode at all).
Click to expand...
Click to collapse
I think Softbrick is the term people use for the state. I had the same problem on Friday night and got a thread by searching for Phone-!-Computer on Google.
To clarify on the OP:
Step 2 is optional IMHO, I attached the phone after I got into download mode.
Also, to explain step 3: Press the three buttons, and keep them pressed while inserting the battery, and and the phone should get into download mode instantly.
Just what i was looking for, but i need the stock firmware for the fascinate sch-i500
Need help for my Alcatel One Touch Pop C7 7041D
Problem:
1. I try to charged my phone for 24 hours but still no sign like my phone is bricked.
2. I also try to charged my battery using universal charger still no good
3. When connecting to computer my phone is not detected even when i checked on SPFlash or MTK droid tool
4. Tried as well to change new battery (maybe the battery i have was already dead) but still no good
I don't know what happened i didn't even change any software or use any custom roms on or even rooting my phone. The last time I used my phone I see that it still have 30% of battery and it shut down when i got home and charged my phone and realize that its not working anymore.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Probably hardware problem? Does still boot? Do you still see the boot logo?
Sent from my M2 using Tapatalk
The same thing happened to me! This is the second time (now my replacement phone is completely dead).
It beeps quietly when I press the power button which makes me assume it's trying to communicate a hardware problem? I just about went over those beeps in IT which is why I'm making that assumption. But is there a way to fix this?
I'm trying to TOT my VS980 like I have countless times for replacements and for some reason the usual method to get into download mode doesn't want to work. I power the phone off fully, hold the volume up button, then plug in my USB. It says download mode for a moment but then goes to a black screen and my PC opens about 10-15 different windows telling me "I need to format the disk in drive E: before you can use it."
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've tried the usual things, uninstalling and reinstalling drivers and haven't had any luck in case its driver/PC related. The phone is currently running DR87s Euphoria 5.1.1 build and I have no issues with ADB working or getting into the devices file system when its booted.
Any suggestions? I've been looking around for quite some time but can't find much on my specific issue.
Right now you have bricked your phone, however all you have to do is download srk tools and unbrick your phone.
Sent from my LG-D800 using Tapatalk
It's not my phone but of a friend. Huawei P8 lite 2015. She is not technical, so she doesn't have any idea what could have happened. She just normally uses the phone and now it is doing this
Func no 10 (boot image)
Error no 1 (security verify failed!)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
She said she was getting a similar error (with a green android) already before but she always managed to get over it by holding some button and then tapping on that link and the phone then booted. (yes I told her WTH didn't she care back then about the error) Now with this one she can't do anything.
How could this have happened and is there a fix which doesn't mean erasing everything?
If I get into a Fastboot mode, connect this to a PC, can I then access the data and photos in it at least via HiSuite for example?
unfortunately I don't have any special experience with Huawei phones and updating of firmware, so I would appreciate any hints
could simple update this way help here?
bump. Could HiSuite work in such state of the phone and maybe transfer data from it? Or do you think I can get to recovery mode in such state?
try to use the link
you just need a usb cable and a computer (windows i think)
I am trying to load CoreELEC on my TUREWELL T95 Max. I have been messing around with this box for a few weeks now and I managed to mess it up pretty good. Right now it is stuck the loading screen showing 4 multi-colored swirling dots. This isn't from a CoreELEC image. To be honest I am not sure which one caused this. I have tried a lot. To try to fix this, I have tried to burn the original firmware from the Turewell website but it never boots from the USB or SD. It just goes into this boot screen. I tried holding down the "reset" button in the headphone jack and power the device back on, but it never powers on. It does nothing. I have to unplug and re-plug for it to come back on to the boot screen. I have tried burning the images with Win32DiskImager and Rufus, as well as trying with a SD card and USB. I have attempted to use PhoenixSuite as well with a male to male USB cord but it just says that there is no device connected.
Does anyone have any advice that I can try to get this box working in some capacity? Right now I dont care if it is the original firmware or custom. Thank you so much for your help!
-Josh
***EDIT***
I have attached a screenshot of the boot screen I am seeing for clarity.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi, do you get to fix that issue? My box has the same problem...