Greetings, friends.
I bought my first smartwatch from an eBay seller. These are the specs specified in the description:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The description states that the watch has Hebrew as selectable language but the watch that I received only has: English, Russian, Spanish, Polish, Portuguese, Turkish, Italian, French, German and Dutch.
I have two questions that I hope someone can answer:
1. What are the specs of the watch that I received and do they match the seller's specs?
2. Are there ROMs for this watch that do have Hebrew as a selectable language?
Info about the product I received:
I used a scatter file for GT08 I found online for flashtool, it is attached to this message (GT08 scatter.rar).
Flashtool RAM Test:
Code:
=============== Memory Detection Report ===============
Internal RAM:
Size = 0x0000D000 (52KB)
External RAM:
Type = SRAM
Size = 0x00400000 (4MB/32Mb)
NOR Flash:
Device ID = "[GigaDevice] GD25LQ32" (236)
Size = 0x00400000 (4MB/32Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
============ RAM Test ============
Data Bus Test :
[D0][D1][D2][D3][D4][D5][D6][D7][D8][D9][D10][D11][D12][D13][D14][D15]
OK!
Address Bus Test :
[A1][A2][A3][A4][A5][A6][A7][A8][A9][A10][A11][A12][A13][A14][A15][A16][A17][A18][A19][A20][A21]
OK!
RAM Pattern Test :
Writing ...
0x44332211,
0xA5A5A5A5,
0xA5A5A500,
0xA500A500,
0xA5000000,
0x00000000,
0xFFFF0000,
0xFFFFFFFF,
OK!
Increment/Decrement Test :
Writing ...
OK!
============ NOR Test ============
Address Bus Test(High Address Pins):
OK!
Pattern Test(0x5A5A):
(0x00001000),(0x00002000),(0x00003000),(0x00004000),(0x00005000),(0x00006000),(0x00007000),(0x00008000),(0x00009000),(0x0000A000),(0x0000B000),(0x0000C000),(0x0000D000),(0x0000E000),(0x0000F000),(0x00010000),(0x00011000),(0x00012000),(0x00013000),(0x00014000),(0x00015000),(0x00016000),(0x00017000),(0x00018000),(0x00019000),(0x0001A000),(0x0001B000),(0x0001C000),(0x0001D000),(0x0001E000),(0x0001F000),(0x00020000),(0x00021000),(0x00022000),(0x00023000),(0x00024000),(0x00025000),(0x00026000),(0x00027000),(0x00028000),(0x00029000),(0x0002A000),(0x0002B000),(0x0002C000),(0x0002D000),(0x0002E000),(0x0002F000),(0x00030000),(0x00031000),(0x00032000),(0x00033000),(0x00034000),(0x00035000),(0x00036000),(0x00037000),(0x00038000),(0x00039000),(0x0003A000),(0x0003B000),(0x0003C000),(0x0003D000),(0x0003E000),(0x0003F000),(0x00040000),(0x00041000),(0x00042000),(0x00043000),(0x00044000),(0x00045000),(0x00046000),(0x00047000),(0x00048000),(0x00049000),(0x0004A000),(0x0004B000),(0x0004C000),(0x0004D000),(0x0004E000),(0x0004F000),(0x00050000),(0x00051000),(0x00052000),(0x00053000),(0x00054000),(0x00055000),(0x00056000),(0x00057000),(0x00058000),(0x00059000),(0x0005A000),(0x0005B000),(0x0005C000),(0x0005D000),(0x0005E000),(0x0005F000),(0x00060000),(0x00061000),(0x00062000),(0x00063000),(0x00064000),(0x00065000),(0x00066000),(0x00067000),(0x00068000),(0x00069000),(0x0006A000),(0x0006B000),(0x0006C000),(0x0006D000),(0x0006E000),(0x0006F000),(0x00070000),(0x00071000),(0x00072000),(0x00073000),(0x00074000),(0x00075000),(0x00076000),(0x00077000),(0x00078000),(0x00079000),(0x0007A000),(0x0007B000),(0x0007C000),(0x0007D000),(0x0007E000),(0x0007F000),(0x00080000),(0x00081000),(0x00082000),(0x00083000),(0x00084000),(0x00085000),(0x00086000),(0x00087000),(0x00088000),(0x00089000),(0x0008A000),(0x0008B000),(0x0008C000),(0x0008D000),(0x0008E000),(0x0008F000),(0x00090000),(0x00091000),(0x00092000),(0x00093000),(0x00094000),(0x00095000),(0x00096000),(0x00097000),(0x00098000),(0x00099000),(0x0009A000),(0x0009B000),(0x0009C000),(0x0009D000),(0x0009E000),(0x0009F000),(0x000A0000),(0x000A1000),(0x000A2000),(0x000A3000),(0x000A4000),(0x000A5000),(0x000A6000),(0x000A7000),(0x000A8000),(0x000A9000),(0x000AA000),(0x000AB000),(0x000AC000),(0x000AD000),(0x000AE000),(0x000AF000),(0x000B0000),(0x000B1000),(0x000B2000),(0x000B3000),(0x000B4000),(0x000B5000),(0x000B6000),(0x000B7000),(0x000B8000),(0x000B9000),(0x000BA000),(0x000BB000),(0x000BC000),(0x000BD000),(0x000BE000),(0x000BF000),(0x000C0000),(0x000C1000),(0x000C2000),(0x000C3000),(0x000C4000),(0x000C5000),(0x000C6000),(0x000C7000),(0x000C8000),(0x000C9000),(0x000CA000),(0x000CB000),(0x000CC000),(0x000CD000),(0x000CE000),(0x000CF000),(0x000D0000),(0x000D1000),(0x000D2000),(0x000D3000),(0x000D4000),(0x000D5000),(0x000D6000),(0x000D7000),(0x000D8000),(0x000D9000),(0x000DA000),(0x000DB000),(0x000DC000),(0x000DD000),(0x000DE000),(0x000DF000),(0x000E0000),(0x000E1000),(0x000E2000),(0x000E3000),(0x000E4000),(0x000E5000),(0x000E6000),(0x000E7000),(0x000E8000),(0x000E9000),(0x000EA000),(0x000EB000),(0x000EC000),(0x000ED000),(0x000EE000),(0x000EF000),(0x000F0000),(0x000F1000),(0x000F2000),(0x000F3000),(0x000F4000),(0x000F5000),(0x000F6000),(0x000F7000),(0x000F8000),(0x000F9000),(0x000FA000),(0x000FB000),(0x000FC000),(0x000FD000),(0x000FE000),(0x000FF000),(0x00100000),(0x00101000),(0x00102000),(0x00103000),(0x00104000),(0x00105000),(0x00106000),(0x00107000),(0x00108000),(0x00109000),(0x0010A000),(0x0010B000),(0x0010C000),(0x0010D000),(0x0010E000),(0x0010F000),(0x00110000),(0x00111000),(0x00112000),(0x00113000),(0x00114000),(0x00115000),(0x00116000),(0x00117000),(0x00118000),(0x00119000),(0x0011A000),(0x0011B000),(0x0011C000),(0x0011D000),(0x0011E000),(0x0011F000),(0x00120000),(0x00121000),(0x00122000),(0x00123000),(0x00124000),(0x00125000),(0x00126000),(0x00127000),(0x00128000),(0x00129000),(0x0012A000),(0x0012B000),(0x0012C000),(0x0012D000),(0x0012E000),(0x0012F000),(0x00130000),(0x00131000),(0x00132000),(0x00133000),(0x00134000),(0x00135000),(0x00136000),(0x00137000),(0x00138000),(0x00139000),(0x0013A000),(0x0013B000),(0x0013C000),(0x0013D000),(0x0013E000),(0x0013F000),(0x00140000),(0x00141000),(0x00142000),(0x00143000),(0x00144000),(0x00145000),(0x00146000),(0x00147000),(0x00148000),(0x00149000),(0x0014A000),(0x0014B000),(0x0014C000),(0x0014D000),(0x0014E000),(0x0014F000),(0x00150000),(0x00151000),(0x00152000),(0x00153000),(0x00154000),(0x00155000),(0x00156000),(0x00157000),(0x00158000),(0x00159000),(0x0015A000),(0x0015B000),(0x0015C000),(0x0015D000),(0x0015E000),(0x0015F000),(0x00160000),(0x00161000),(0x00162000),(0x00163000),(0x00164000),(0x00165000),(0x00166000),(0x00167000),(0x00168000),(0x00169000),(0x0016A000),(0x0016B000),(0x0016C000),(0x0016D000),(0x0016E000),(0x0016F000),(0x00170000),(0x00171000),(0x00172000),(0x00173000),(0x00174000),(0x00175000),(0x00176000),(0x00177000),(0x00178000),(0x00179000),(0x0017A000),
Pictures from the phone app when typing *#8375# :
Flashtool readback rom (4MiB):
(In attachment, ROM_0.rar)
MTK Resource Edit V1.3 info:
MTK_ROMINFO_v09 MTK61D_BTDIALER_11C_PCB01_GPRS_MT6261_S00.LD991_RUANAN_GT08S_LCD7789_9304_CAM3A01_LANGB_V1_6.BIN
Any help will be appreciated!
OK, bad news: The watch died.
Funny thing is, I didn't do anything to it, it just died on it's own. I haven't flashed any firmware at all.
The watch will not turn on and will not charge the battery. Battery measures 3.3V and does not get charged by an external charger. Trying to turn the watch on by connecting an external (good) battery also fails.
Next I will try to flash a new firmware, probably this one:
https://drive.google.com/file/d/0B_hRh3DjuBoeRHNGNUFlVFF0eVE/view?pref=2&pli=1
If anyone is keeping track, I flashed my watch with this ROM:
https://drive.google.com/file/d/0B_hRh3DjuBoeRHNGNUFlVFF0eVE/view?pref=2&pli=1
And it got back to life. I believe this firmware is exactly like the one that my watch had originally (has the same rominfo code).
After the watch worked again, I decided to risk it and try flashing new ROMs. I ended up flashing nearly all the 32Mbit firmwares from Golem's collection. The results can be categorized into five groups (by ROMINFO code):
1. LCD Worked correctly:
ROMINFO:
a. MTK61D_BTDIALER_11C_PCB01_GPRS_MT6261_S00.LD991_RUANAN_GT08S_LCD7789_9304_CAM3A01_LANGB_V1_6
b. MTK61D_BTDIALER_11C_PCB01_GPRS_MT6261_S00.LD991_GRD_GT08S_LCD7789_9304_CAM3A01_LANGA_V1_0
2. Touchscreen matrix was rotated 180° (i.e. to press what's displayed in the bottom-left, you touch your finger to the top-right):
ROMINFO:
a. MTK61D_BTDIALER_11C_PCB01_GPRS_MT6261_S00.JIAQI_61D_YIDITONG_CAM3A01_LCD7789_LANGA_V1_1
b. MTK61D_BTDIALER_11C_PCB01_GPRS_MT6261_S00.LD991_JMX_CAM3A01_LCD7789_9304_LANGA_V1_0
3. Touchscreen does not work (pressing what is displayed doesn't work):
ROMINFO:
a. [all firmwares starting with:] GPLUS61A_11C_NX9_PCB01_GPRS_MT6261_S00.NX9_61D_240
b. MTK61D_BTDIALER_11C_PCB01_GPRS_MT6261_S00.HD_GV18_SW_V1_B
4. Display was all white:
Only one firmware: SH27_PCB01_GPRS_MT6261_S00.MAUI_11C_W13_52_MP_V5
5. Watch would not turn on:
Only one firmware: MTK61D_BTDIALER_11C_PCB01_GPRS_MT6261_S00.MAUI_11C_W13_52_MP_V2_F1
None of the firmwares with the working LCD (even those with 180° flipped lcd) had Hebrew. Some of them did have more languages like Arabic, Hindi, Farsi etc but that doesn't help me
So eventually I flashed my original ROM which I backed up beforehand. This brought back my IMEI, which I thought I had lost.
C4lculated said:
If anyone is keeping track, I flashed my watch with this ROM:
https://drive.google.com/file/d/0B_hRh3DjuBoeRHNGNUFlVFF0eVE/view?pref=2&pli=1
And it got back to life. I believe this firmware is exactly like the one that my watch had originally (has the same rominfo code).
After the watch worked again, I decided to risk it and try flashing new ROMs. I ended up flashing nearly all the 32Mbit firmwares from Golem's collection. The results can be categorized into five groups (by ROMINFO code):
1. LCD Worked correctly:
ROMINFO:
a. MTK61D_BTDIALER_11C_PCB01_GPRS_MT6261_S00.LD991_RUANAN_GT08S_LCD7789_9304_CAM3A01_LANGB_V1_6
b. MTK61D_BTDIALER_11C_PCB01_GPRS_MT6261_S00.LD991_GRD_GT08S_LCD7789_9304_CAM3A01_LANGA_V1_0
2. Touchscreen matrix was rotated 180° (i.e. to press what's displayed in the bottom-left, you touch your finger to the top-right):
ROMINFO:
a. MTK61D_BTDIALER_11C_PCB01_GPRS_MT6261_S00.JIAQI_61D_YIDITONG_CAM3A01_LCD7789_LANGA_V1_1
b. MTK61D_BTDIALER_11C_PCB01_GPRS_MT6261_S00.LD991_JMX_CAM3A01_LCD7789_9304_LANGA_V1_0
3. Touchscreen does not work (pressing what is displayed doesn't work):
ROMINFO:
a. [all firmwares starting with:] GPLUS61A_11C_NX9_PCB01_GPRS_MT6261_S00.NX9_61D_240
b. MTK61D_BTDIALER_11C_PCB01_GPRS_MT6261_S00.HD_GV18_SW_V1_B
4. Display was all white:
Only one firmware: SH27_PCB01_GPRS_MT6261_S00.MAUI_11C_W13_52_MP_V5
5. Watch would not turn on:
Only one firmware: MTK61D_BTDIALER_11C_PCB01_GPRS_MT6261_S00.MAUI_11C_W13_52_MP_V2_F1
None of the firmwares with the working LCD (even those with 180° flipped lcd) had Hebrew. Some of them did have more languages like Arabic, Hindi, Farsi etc but that doesn't help me
So eventually I flashed my original ROM which I backed up beforehand. This brought back my IMEI, which I thought I had lost.
Click to expand...
Click to collapse
hi bro
so you did not find any thing to do with your watch.
i have similar watch.
we cant do any nice modification for our watches?
did you try to install new watch faces?
No, AFAIK the 32Mb models are not modifiable in any way.
In the specifications i read 64+128. 64 mb Rom + 128 Ram???
Enviado desde mi LG-D855 mediante Tapatalk
Hi..i have exactly the same watch with the same firmware..how can i restore back my rom dump?? i cant do it :crying: can u help me? if you may share your backup folder would be gratefull....
thanks in advance...
hello
i got the gt08 with no Hebrew , can i add hebrew?
Plz help me see this https://forum.xda-developers.com/general/xda-assist/bricked-gt08-t3537318
If you want to add your own language... refer to this thread from mine https://forum.xda-developers.com/showpost.php?p=72063702&postcount=2128
Newbie with GT08 MTK61D wanting help
Hi,
Sorry if this or similar has already been posted.
I have just bought a GT08 from wish.com. When it arrived and fully charged, it all worked fine for a few hours.
Then it decided not to accept and retain the time change, it would just go back to default immediately no matter what I tried.
I therefore thought I might try to flash the firmware, but found that this seemed to be very confusing.
From my watch screen I gleaned this info:
GT08 IMEI: 358521458986545
LD991B_V7.0_COB_A_TQHD_GT08_JXD7789_9304_LX9305_A_V8.6
[BRANCH]: 11CW1352MP
MTK61D_BTDIALER_11C
BUILD: BUILD_NO
SERIAL#:
[BUILD TIME] 2017/09/23 12:34
[MRE VERSION] - 266941256
HAL_VERNO:
I determined that my firmware was MTK61D, but I cannot seem to find the correct firmware, also any firmware I chose to run (DZ09 etc) through Mediatek FlashTool_v5.1516.00.00 came up with an error that I cannot correct: "Your BROM DLL version and DA version is not matched! Please check the DA path!"
I tried: SP_Flash_Tool_v5.1744_Win which would not accept any downloaded firmwares as they did not have a ".TXT" file only ".CFG".
So now after two days of searching I am still in the same place as I started with a watch that will not keep changed time.
Any help?????
Cuandur said:
Hi,
Sorry if this or similar has already been posted.
I have just bought a GT08 from wish.com. When it arrived and fully charged, it all worked fine for a few hours.
Then it decided not to accept and retain the time change, it would just go back to default immediately no matter what I tried.
I therefore thought I might try to flash the firmware, but found that this seemed to be very confusing.
From my watch screen I gleaned this info:
GT08 IMEI: 358521458986545
LD991B_V7.0_COB_A_TQHD_GT08_JXD7789_9304_LX9305_A_V8.6
[BRANCH]: 11CW1352MP
MTK61D_BTDIALER_11C
BUILD: BUILD_NO
SERIAL#:
[BUILD TIME] 2017/09/23 12:34
[MRE VERSION] - 266941256
HAL_VERNO:
I determined that my firmware was MTK61D, but I cannot seem to find the correct firmware, also any firmware I chose to run (DZ09 etc) through Mediatek FlashTool_v5.1516.00.00 came up with an error that I cannot correct: "Your BROM DLL version and DA version is not matched! Please check the DA path!"
I tried: SP_Flash_Tool_v5.1744_Win which would not accept any downloaded firmwares as they did not have a ".TXT" file only ".CFG".
So now after two days of searching I am still in the same place as I started with a watch that will not keep changed time.
Any help?????
Click to expand...
Click to collapse
try this flashtool version :
https://drive.google.com/open?id=1xd3HyHitBzW0x1fufchU5aFkAoY9slV4
DZ09 Firmware:
https://drive.google.com/open?id=1xJdeyZIe3n0k85e5FjZm9-0bGUrXNVRW
---------- Post added at 08:25 AM ---------- Previous post was at 08:04 AM ----------
naorway said:
hello
i got the gt08 with no Hebrew , can i add hebrew?
Click to expand...
Click to collapse
GT08 with HEBREW Language added:
https://drive.google.com/open?id=1NNAAHE1jVyPfuS04ZG-8NHs5bfCUYryv
Negative colours and no touch response
oxatools said:
try this flashtool version :
*****
DZ09 Firmware:
*****
---------- Post added at 08:25 AM ---------- Previous post was at 08:04 AM ----------
GT08 with HEBREW Language added:
*****
Click to expand...
Click to collapse
Thank-you for your response, I have tried your suggestions which worked with some response, unfortunately now my watch screen seems to be showing everything in colour negative and no response to touch, all I can do is remove the battery to turn it off.
Any advice?
---------- Post added at 01:28 PM ---------- Previous post was at 01:27 PM ----------
[/COLOR]
Cuandur said:
Thank-you for your response, I have tried your suggestions which worked with some response, unfortunately now my watch screen seems to be showing everything in colour negative and no response to touch, all I can do is remove the battery to turn it off.
Any advice?
Click to expand...
Click to collapse
Can you Upload your Fullflash or Flash Files Backup
i will check version
Backup
oxatools said:
Can you upload yor backup?
I will check version
Thanks
---------- Post added at 01:28 PM ---------- Previous post was at 01:27 PM ----------
Can you Upload your Fullflash or Flash Files Backup
i will check version
Click to expand...
Click to collapse
Ummmm, Noob response...Backup?
I followed the instructions that I could read (ie not Chinese) and it made no mention of Backup that I am aware, so I assume there is no backup (sorry)
I read and followed "Download operation steps.doc" but all the other docs etc are in Chinese, I didn't see which other doc I could use to start the process.
Cuandur said:
Ummmm, Noob response...Backup?
I followed the instructions that I could read (ie not Chinese) and it made no mention of Backup that I am aware, so I assume there is no backup (sorry)
I read and followed "Download operation steps.doc" but all the other docs etc are in Chinese, I didn't see which other doc I could use to start the process.
Click to expand...
Click to collapse
Thats bad!!!!
Never ever flash your watch or phone if you do not have a backup of original firmware.
There is no way to get it back!!!!!
Try to Download a nother Version, reflash it and hope its working!!!!
Update
oxatools said:
Thats bad!!!!
Never ever flash your watch or phone if you do not have a backup of original firmware.
There is no way to get it back!!!!!
Try to Download a nother Version, reflash it and hope its working!!!!
Click to expand...
Click to collapse
For anybody who's interested I managed to get my watch running again (sort of).
I tried a few ROM's but got varying results from inverted colours with no touch response, normal colours no touch but I finally got one to work, it has inverted colours but has touch response.
FYI: https://www.needrom.com/download/rom-gt08-mtk6261d/ is the one working now.
But I am back to original problem, the clock refuses to accept new time given and stays on default time (including time taken since start) and have just discovered it now says "Invalid SIM".
?
Cuandur said:
For anybody who's interested I managed to get my watch running again (sort of).
I tried a few ROM's but got varying results from inverted colours with no touch response, normal colours no touch but I finally got one to work, it has inverted colours but has touch response.
FYI: https://www.needrom.com/download/rom-gt08-mtk6261d/ is the one working now.
But I am back to original problem, the clock refuses to accept new time given and stays on default time (including time taken since start) and have just discovered it now says "Invalid SIM".
?
Click to expand...
Click to collapse
have you tried thes GT08 Firmwares?
https://forum.xda-developers.com/smartwatch/other-smartwatches/rom-gt08-mtk6261a-t3390504
Looking for MCU firmware versions
5.3.19-63-xx-C03101-yymmdd
5.3.19-22-xx-E56201-161025 firmware was found https://drive.google.com/file/d/1tcoJ0U8J-ESXOMNZGDzh4k_c_yeSLbRq/view?usp=sharing (Thx MERCEDES_W203)
where xx - does not matter
yymmdd - firmware release date
How to get a backup copy of the MCU firmware from HU
1. Need root.
2. You must install the terminal emulator from Google Play.
3. Run the commands in the terminal emulator
To save on usb stick
Code:
su
cd /dev/block/by-name
dd if=private of=/usb0/private.img bs=4096
or
Code:
su
cd /dev/block/by-name
dd if=private of=/usb1/private.img bs=4096
To save to the SD card, if available
Code:
su
cd /dev/block/by-name
dd if=private of=/extsd0/private.img bs=4096
or
Code:
su
cd /dev/block/by-name
dd if=private of=/extsd1/private.img bs=4096
4. We will get a file private.img, size 16 MB
5. Give a link to the file or attach here.
How to make a backup copy of the MCU firmware using Backup_copy.apk (View attachment Backup_copy.apk)
1. Install the program Backup_copy.apk
2. Press the button Make a copy "MCU"
3. We will get a file /sdcard/MCU.img, size 16 MB
4. Give a link to the file or attach here.
Thank you.
Mistaken with the version of one of the firmware.
Need such firmware 5.3.19-22-xx-E56201-yymmdd
****-jones said:
Mistaken with the version of one of the firmware.
Need such firmware 5.3.19-22-xx-E56201-yymmdd
Click to expand...
Click to collapse
Hello my friend
Im not sure if I can help, but Ive found in my computer the backup of native 4.4.4 firmware of my HU made before the italian seller sent me firmware update : https://forum.xda-developers.com/showpost.php?p=75612912&postcount=137
As you know Ive made a post also on 4PDA : http://4pda.ru/forum/index.php?s=&showtopic=792456&view=findpost&p=71019608
FIRMWARE ANDROID 4.4.4 https://drive.google.com/file/d/1oeN_dqGmXqSqGY_RauFN56ljv9Wso5ct/view?usp=sharing
FIRMWARE ANDROID 5.1.1 https://drive.google.com/file/d/1z-HPRDeielPxQAZR9aymbmeqOfCbfMjK/view?usp=sharing
As you see they both had MCU 5.3.16-22-B0-E50201-150818
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you don't have a way to get MCU firmware from those firmwares let me know if I can downgrade my HU to 4.4.4 and then get backup of MCU and link here
Maybe this will be the right time to find manufacture of this "fake audiosources HWID 22" wich is 34 as you know and as you see:
Just to let you know, Ive sent emails and messaged with all audiosources online support and nobody told me answers about this MCU
MERCEDES_C_W203 said:
Maybe this will be the right time to find manufacture of this "fake audiosources HWID 22" wich is 34 as you know and as you see
Click to expand...
Click to collapse
This is not "fake"!
22 in hexadecimal is equal to 34 in decimal
I'll look at the links that you gave.
Oh ok sorry
Maybe Ive made wrong translation from 4PDA where people talk about that HW ID
Thanks a lot :good:
****-jones said:
This is not "fake"!
22 in hexadecimal is equal to 34 in decimal
I'll look at the links that you gave.
Click to expand...
Click to collapse
MERCEDES_C_W203 said:
Hello my friend
Im not sure if I can help, but Ive found in my computer the backup of native 4.4.4 firmware of my HU made before the italian seller sent me firmware update : https://forum.xda-developers.com/showpost.php?p=75612912&postcount=137
As you know Ive made a post also on 4PDA : http://4pda.ru/forum/index.php?s=&showtopic=792456&view=findpost&p=71019608
FIRMWARE ANDROID 4.4.4 https://drive.google.com/file/d/1oeN_dqGmXqSqGY_RauFN56ljv9Wso5ct/view?usp=sharing
FIRMWARE ANDROID 5.1.1 https://drive.google.com/file/d/1z-HPRDeielPxQAZR9aymbmeqOfCbfMjK/view?usp=sharing
If you don't have a way to get MCU firmware from those firmwares let me know if I can downgrade my HU to 4.4.4 and then get backup of MCU and link here
Click to expand...
Click to collapse
Updating the android and updating the mcu are two different processes.
I looked at the links that you gave. They do not contain the firmware that you had (5.3.16-22-B0-E50201-150818)
I have a question. Where did you get the firmware 5.3.17-22-12-E50201-150926? Can you give it?
MERCEDES_C_W203 said:
...
Click to expand...
Click to collapse
you can make photo of the decoder of the can-bus?
****-jones said:
Where did you get the firmware 5.3.17-22-12-E50201-150926? Can you give it?
Click to expand...
Click to collapse
Ive got it from here https://forum.xda-developers.com/an...s/how-to-update-quadcore-r16-tonghai-t3635779 (nosidefcp thread Final FW recomended with root included) https://yadi.sk/d/suOSRwtd3KSbw4
About 5.3.16-22-B0-E50201-150818 it was in my HU as I bought it, never made any changes until firmware update 5.1.1 (I dont know if the italian seller changed the original MCU firmware before sell it)
About decoder of the can-bus picture, the HU is not dismounted but I still have other cables in the HU box:
MERCEDES_C_W203 said:
Ive got it from here https://forum.xda-developers.com/an...s/how-to-update-quadcore-r16-tonghai-t3635779 (nosidefcp thread Final FW recomended with root included) https://yadi.sk/d/suOSRwtd3KSbw4
About 5.3.16-22-B0-E50201-150818 it was in my HU as I bought it, never made any changes until firmware update 5.1.1 (I dont know if the italian seller changed the original MCU firmware before sell it)
About decoder of the can-bus picture, the HU is not dismounted but I still have other cables in the HU box:
Click to expand...
Click to collapse
Did you update yourself?
In the links to the update to android 6 there are no firmware that contains firmware MCU.
I can not understand at what moment the mcu firmware changed.
Can bus decoder look like this
Can you ask the seller for a mcu firmware 5.3.16-22-B0-E50201-150818?
****-jones said:
Did you update yourself?
In the links to the update to android 6 there are no firmware that contains firmware MCU.
I can not understand at what moment the mcu firmware changed.
Ive updated to android 6 following nosidefcp's thread using that firmware V7.3.1_20170610.110122_KED1-mod after Ive used 2 other firmware trying to find a way to fix my problems with SWC:
https://drive.google.com/file/d/1XqZ5VlJT_-QZCkaLVsAjuKIc5RX6-nxI/view?usp=sharing V7.3.2_20170908.095919_TW2-mod
https://drive.google.com/file/d/1Btc66h3iz-tZhlE9Ien-VTjCJk7CYbNc/view?usp=sharing V7.3.2_20171116.202256_KED1-mod
Can bus decoder look like this
Can you ask the seller for a mcu firmware 5.3.16-22-B0-E50201-150818?
Click to expand...
Click to collapse
Ive already asked him but he doesn't reply to me anymore
---------- Post added at 10:27 PM ---------- Previous post was at 10:00 PM ----------
****-jones said:
CAN BUS DECODER
Click to expand...
Click to collapse
This video was made by the seller, you can see the can bus decoder, I hope is useful
https://www.youtube.com/watch?v=V9xIWjqAzBg
MERCEDES_C_W203 said:
Ive already asked him but he doesn't reply to me anymore
Click to expand...
Click to collapse
Make a backup copy of the mcu firmware, as written in the first post and give me the file MCU.img.
I'll see what's inside.
****-jones said:
Make a backup copy of the mcu firmware, as written in the first post and give me the file MCU.img.
I'll see what's inside.
Click to expand...
Click to collapse
MCU at moment in my HU
https://drive.google.com/file/d/1TXsor1p15jN_tpGSptx7YX8LGeP6HKH_/view?usp=sharing
MERCEDES_C_W203 said:
MCU at moment in my HU
https://drive.google.com/file/d/1TXsor1p15jN_tpGSptx7YX8LGeP6HKH_/view?usp=sharing
Click to expand...
Click to collapse
The video can not see the inscriptions on can bus decoder
This is what mcu contains
There is no version 5.3.17-22-B0-E50201-150926
Try to choose a model VW OBD(RZC)(5.3.17, CONFIG, RDS, Color, BC6, NODVD, TDA7719, TEF662x)
Version of the mcu - 5.3.17-22-13-E50201-150926
****-jones said:
The video can not see the inscriptions on can bus decoder
This is what mcu contains
There is no version 5.3.17-22-B0-E50201-150926
Try to choose a model VW OBD(RZC)(5.3.17, CONFIG, RDS, Color, BC6, NODVD, TDA7719, TEF662x)
Version of the mcu - 5.3.17-22-13-E50201-150926
Click to expand...
Click to collapse
Tomorrow I will try to dismount HU and take pic of can bus decoder, and once dismounted I will open also HU and take pics of hardware (I hope I dont break my car )
Now I look for MCU 5.3.17-22-13-E50201-150926 and I hope the HU seller will reply to me :good:
Thanks for now
MERCEDES_C_W203 said:
Tomorrow I will try to dismount HU and take pic of can bus decoder, and once dismounted I will open also HU and take pics of hardware (I hope I dont break my car )
Now I look for MCU 5.3.17-22-13-E50201-150926 and I hope the HU seller will reply to me :good:
Thanks for now
Click to expand...
Click to collapse
Do not look for the firmware, just choose a model VW OBD(RZC)(5.3.17, CONFIG, RDS, Color, BC6, NODVD, TDA7719, TEF662x) in Extra settings-Model choose
After the choice, do not touch anything in the car, absolutely nothing until the HU does reboot!
****-jones said:
Do not look for the firmware, just choose a model VW OBD(RZC)(5.3.17, CONFIG, RDS, Color, BC6, NODVD, TDA7719, TEF662x) in Extra settings-Model choose
Click to expand...
Click to collapse
Ive tried VW OBD(RZC) VW OBD(SS) and VW OBD(5.3.17 but still same problem with SWC, Ive tried to set it with a "click" and "holding" but it doesn't save
I really dont know how original MCU changed from 5.1.1. to 6.0.1 .
The seller now has got same model but with WINCE 6.0 and there are some more info about HU, maybe can help:
Type: Gps Navigator
Use: Automotive
Screen Size: 7 inch
Function: Touch Screen, Bluetooth-enabled, Mp3/Mp4, DVD/VCD, Photo Viewer, Radio Tuner
Place of Origin: Guangdong, China (Mainland)
Brand Name: HUIFEI
Model Number: KGL-7508
Warranty: 1 Years
Support LRC: Lyrics synchronized display
GPS Channel: 64Channels
GPS: MTK MT3336N ------800MHZ + 250MHZ DSP
GPS Frequency: 1.57542GHZ
Multi-language Menu OSD Language: Italian,Turkish,Portuguese,French,Polish,Arabic,Hebrew
Disc: Virtual 4-disc
EQ: 32HZ - 16KHZ (10 parts digital EQ tone adjustment)
button backlight colors: 7
HD: 1080P
Processor: 800MHZ
Packaging & Delivery
Packaging Details: GW/pcs:2.92KG V/pcs:32.5cm*25cm*16.5cm
Delivery Detail: 2-3days after receiving your payment
Specifications
car GPS Navigation
1.Support original steering wheel control
2.Memory: SK HYNIX/SAM. 256MB DDR 3 SDRAM
3.Support 3G/WIFI
huifei Wince car GPS Navigation with steering wheel control,3G,Wifi for Benz C-Class W203 (2004-2007),Benz CLK W209(2004-2011)
If you need more pics about HU please tell me before I mount it back
I hope you can find all informations and details now about this HU
MERCEDES_C_W203 said:
Ive tried VW OBD(RZC) VW OBD(SS) and VW OBD(5.3.17 but still same problem with SWC, Ive tried to set it with a "click" and "holding" but it doesn't save
Click to expand...
Click to collapse
Thank you for the photo. But unfortunately I did not see the necessary information
You have tried VW OBD (RZC) VW OBD (SS) and VW OBD. But I did not understand whether the MCU version was changing or not?
What does it mean "Ive tried to set it with a "click" and "holding" but it doesn't save" ?
****-jones said:
Thank you for the photo. But unfortunately I did not see the necessary information
You have tried VW OBD (RZC) VW OBD (SS) and VW OBD. But I did not understand whether the MCU version was changing or not?
What does it mean "Ive tried to set it with a "click" and "holding" but it doesn't save" ?
Click to expand...
Click to collapse
About MCU if there's some specific firmware do install could you link me it ? Maybe it will replace also MCU
Please, if you need other pics I will make, tell me if you need to see something more specific informations.
When I open SWC setup I click to "start" I click to "volume up" for example, then I "click" on "volume up" of SWC but on setup it doesn't save it, same thing is I "hold" on "volume up" on SWC
MERCEDES_C_W203 said:
When I open SWC setup I click to "start" I click to "volume up" for example, then I "click" on "volume up" of SWC but on setup it doesn't save it, same thing is I "hold" on "volume up" on SWC
Click to expand...
Click to collapse
Can you show a screenshot or video?
As far as I know, if you have a cab bus decoder, then the information about the button press comes from the can bus through the decoder. Then the main role is played by the firmware MCU, which now does not correspond to the model of auto.
Hey all, I know this a long shot but I am looking for someone who could possibly lend a bit of their time to share some knowledge. No, I am not looking for a custom firmware for my device because none exists. What I am hoping for is a sanity check and maybe a nudge in the right direction. I have spent countless hours trolling translated 4PDA posts. While I am certainly no developer, I do like to poke around in files and learn what I can. I understand all the risks and consequences.
Wanted to verify if root can be obtained by patching the boot image with Magisk. Not looking to do anything crazy but I am trying to make some small edits to how Steering Wheel commands work. My unit uses the canbus decoder to handle several features including SWC. I found that with the canbus, SWC could not be mapped using the built in app. I found the wiring info for my vehicle and rewired SWC from canbus to the KEY1 and KEY2 wires on the head unit. This allows me to now program my wheel buttons and even set long presses, yay. The one thing that does not work is mapping the voice button to launch Google Assistant or similar. Canbus mapping was weak and had duplicate functions like making the voice button a second mute button, lame. I also want to start learning how to modify the OEM apps like Radio, Music, BT, etc. So enter my need for root permissions.
I do have a copy of some firmware files for this device that were provided as hotfix for people having boot issues. I was able to merge the Android files into the System.img file using CMD but no luck figuring out how to decrypt the boot img file. The last file I believe is the MCU file. Kaier Tool seems unavailable from every link I've tried(edit: found what i was looking for and am now much closer). Some of these Russian links are straight up bogus as well...
Anyways, here is the system info page for my device and a link to the firmware files. Now I should add that I may not actually flash these files to my device but someone with a damaged unit may volunteer to test it out. I like my stuff working. I just kind of want to go through the motions and see whats up. I appreciate any help someone is willing to offer. At the very least maybe these files can assist someone else as the firmware for these devices is not easily obtained (Please do not flash them to your device and hope it will work, it won't). Again, I am looking to learn, so this will be an ongoing process for me. Thanks!
EDIT: I did obtain Root. See post https://forum.xda-developers.com/showpost.php?p=83963285&postcount=17
Drive Link to Firmware Files:
TS9 4Runner Firmware (853 MB)
System Info:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
hi. i have also SWC working, but cannot program them. can you help me finding key 1 and key 2 connections?
thanks
The firmware files, it is based on Android 8.1 or Android 9 ?
This looks exactly like my Ownice K6, same firmware layout, almost same firmware name, you will prob find you can even run Ownice firmware
Check out my thread: https://forum.xda-developers.com/an...its/ownice-k6-c960-android-head-unit-t4085239
On there is a link to the kaier support tool that will decrypt your boot image
Can you go into more detail on what you did with your swc buttons to get them working?
Wiring and swc issues
Hi there,
I hope you can kindly help me with this head unit.
I'm from Germany and own a Toyota Hilux VIII (2016 Model, GUN125).
From Australia I brought an Android radio.
Mine is a sp9853i_1h10_vmm (according to Android system information).
MCU version is Ts9.4.3-133-300-C03681-200514
My problem is now, that some things don't work like expected. And I don't know where to find any help.
For example music information is not shown on the car's multi-information-display.
And the wiring harness has one connector for which I don't have a corresponding connector on vehicle side.
Some pins inside the connectors seem to be in wrong position.
From my point of view, the cars sold in Australia have a slighty different wiring compared to the european ones.
What I already did is to re-pin one of the can bus decoder connectors, so that the can bus high/low matches the vehicle side.
But still I get no music/navi info on the multi-information-display of my car.
And, of course, I have the same issue with remapping of swc keys.
So I would be glad about any information regarding wiring, or known wiring issues with these head units.
And @RabbidHampster:
How did you re-wire the swc?
Tanks a lot
Michael
102649259 said:
It's completely decrypted. Please use VPN to download!
https://pan.baidu.com/s/1P7BKda-mZpMVRpfcuYTMyA
code:igoj
Click to expand...
Click to collapse
Can you give another link for TS9 root? I can't get Baidu to let me make account.
102649259 said:
no vpn?
Click to expand...
Click to collapse
I have vpn, but not china vpn. Tried hong kong but no luck.
Attachment you post does not work.
102649259 said:
Sorry, I've uploaded it to Google now!
https://drive.google.com/file/d/1kXnbGVp_NKHXMqT4RbCeRBsxI_92bbfu/view?usp=sharing
Click to expand...
Click to collapse
Sorry. Thanks, but do you have TS9 root?
I mean this file. 鼎微TS9-ROOT.zip
Is there download for it?
102649259 said:
https://drive.google.com/file/d/1g4oBAk_YAfarHGeOZgu_51MRcIEzAySn/view?usp=sharing
Click to expand...
Click to collapse
Hi. I'm sorry. I guess you were saying that TS9 and TS8 are same root by this comment:
Allwinner 9853 root general
Sorry if that is the case. I did not catch that at first.
mclaudio said:
hi. i have also SWC working, but cannot program them. can you help me finding key 1 and key 2 connections?
thanks
Click to expand...
Click to collapse
Key 1 and Key 2 will depend on your Head Unit. On my unit they were two loose wires. Orange and Orange/White. I studied wiring diagrams of my vehicle to find the correct wires on the vehicle side.
coolclouds said:
The firmware files, it is based on Android 8.1 or Android 9 ?
Click to expand...
Click to collapse
It is based on 8.1
Das_Wieselchen said:
And, of course, I have the same issue with remapping of swc keys.
So I would be glad about any information regarding wiring, or known wiring issues with these head units.
And @RabbidHampster:
How did you re-wire the swc?
Tanks a lot
Michael
Click to expand...
Click to collapse
I don't know if these units can send info back to vehicle displays. Never seen it personally. I got the "voice" SWC option to finally work after reflashing the firmware. Apparently there were several revisions but they didn't bother updating the system version on my unit.
So I came up with this back in Feb but never followed up because I got busy. It does work for Root.
If your stock firmware doesn't have 4192eb4c-c1fc-11e8-8f83-a7a51df1443b then my posted firmware probably wont work for you. Ownice/Allwinner has some similar units.
Steps for MY Head Unit (no guarantees for anyone else):
The file 4192eb4c-c1fc-11e8-8f83-a7a51df1443b in the firmware is the encrypted boot.img
Decrypt 4192eb4c-c1fc-11e8-8f83-a7a51df1443b using Kaier tool.
Use Magisk on the Ts9 unit to patch the boot.img
Encrypt patched boot.img using Kaier tool save as 4192eb4c-c1fc-11e8-8f83-a7a51df1443b
Put 4192eb4c-c1fc-11e8-8f83-a7a51df1443b on fat32 usb and update unit
Check with Root Checker
hello everyone I want to ask if someone tries software from isudar or Ownice on ullgo head unit
This is my head unit
RabbidHampster said:
So I came up with this back in Feb but never followed up because I got busy. It does work for Root.
If your stock firmware doesn't have 4192eb4c-c1fc-11e8-8f83-a7a51df1443b then my posted firmware probably wont work for you. Ownice/Allwinner has some similar units.
Steps for MY Head Unit (no guarantees for anyone else):
The file 4192eb4c-c1fc-11e8-8f83-a7a51df1443b in the firmware is the encrypted boot.img
Decrypt 4192eb4c-c1fc-11e8-8f83-a7a51df1443b using Kaier tool.
Use Magisk on the Ts9 unit to patch the boot.img
Encrypt patched boot.img using Kaier tool save as 4192eb4c-c1fc-11e8-8f83-a7a51df1443b
Put 4192eb4c-c1fc-11e8-8f83-a7a51df1443b on fat32 usb and update unit
Check with Root Checker
Click to expand...
Click to collapse
so your firmware should have root permissions? each of these files is the same as the files the seller sent me for my unit, so I am pretty sure it will work if I try it, the only thing is... the system and MCU and Android versions seem to be newer on my device...
---------- Post added at 03:47 AM ---------- Previous post was at 02:48 AM ----------
Android 10 ( I think it is not correct ... I think it is 8.1)
MCU Version:
Ts9.4.3-100-30-A4C695-200804(MM031)
No CAN apparently
System Version:
V11.1.2_20200428.171515_TS9L-TW8X
and my resolution is 1024_600 I believe
I have fw for it if anyone would like to analyze and perhaps add root?
sent from seller:
the file name is V11.1.2_20200428.171515_TS9L-TW8-X.zip if that means anything....
Hello everyone
This is android 10 firmware for ts9 sp9853i 4G :
D-LVDS-TS-4G 1280x720 public board anroid 10.0 update file.zip
drive.google.com
This playet has lots of bugs. Can't change to favorite apps. Zlink not work,
False written menu,....
Hello. I come from this thread:
Alps FF5000 and other AC8227L chipset head units - updates and solutions
Hello ! I have trouble with bought alps device car head unit FF5000 (model 8227L). System freezes, process com.ts.mainUI8 hanging not allowing to enter and listen any kind of music, dsp worked now just blinks and does nothing, buttons dont work...
forum.xda-developers.com
MCU:TS907.190518(H)
Which helped me a lot. Since I bought a radio on aliexpress ALPS FF-5000 1gbram (real)/16gbrom. That I arrive with a very current firmware and makes the radio work quite slow. After trying various firmware. I can see that the best of all of that thread and the smoothest it works is:
8227L_CHS_UI04-国外10_v3_20191207.rar
I already bought more radios like these from the seller before and they had a different UI than now and they worked frankly well... more fluid. Could someone tell me where to get this UI:
Thank you and continue advancing in this great forum.
albertoak said:
Hello. I come from this thread:
Alps FF5000 and other AC8227L chipset head units - updates and solutions
Hello ! I have trouble with bought alps device car head unit FF5000 (model 8227L). System freezes, process com.ts.mainUI8 hanging not allowing to enter and listen any kind of music, dsp worked now just blinks and does nothing, buttons dont work...
forum.xda-developers.com
MCU:TS907.190518(H)
Which helped me a lot. Since I bought a radio on aliexpress ALPS FF-5000 1gbram (real)/16gbrom. That I arrive with a very current firmware and makes the radio work quite slow. After trying various firmware. I can see that the best of all of that thread and the smoothest it works is:
8227L_CHS_UI04-国外10_v3_20191207.rar
I already bought more radios like these from the seller before and they had a different UI than now and they worked frankly well... more fluid. Could someone tell me where to get this UI:
Thank you and continue advancing in this great forum.
Click to expand...
Click to collapse
Hi try with this software from JUNSUN it helped my device, we have simialr ones.
Download firmware from comment area in video and update device.
Then , when updated , go to factory menu with pin code 8888 and adjust settings for device (RADIO MENU , OTHER, DISPLAY and TOUCH STUDY/CANBUS - these two menus - if you must make steering wheel command s to work.).
FOR RADIO MENU :
- if radio.app is stalling or freezes - set OSCILACION to 9,20, FM and AM sense to 21-27, RDS ON, IC TYPE is your chip of radio (do not change that as these if wrong will freeze radio and commands), SORT is RADIO FREQ
- if radio freezes after bootup and wont response at all - try this app :
(just download file and transfer to device, then get in APK installer and install radio from this apk file)
Anton TNT said:
Hi try with this software from JUNSUN it helped my device, we have simialr ones.
Download firmware from comment area in video and update device.
Click to expand...
Click to collapse
Thank you. But I'm looking for the UI in the photo of the first post. do you know what version it is?
It's UI3 - Ver. 7 - android 10
Anton TNT said:
It's UI3 - Ver. 7 - android 10
Click to expand...
Click to collapse
where can i get it?
albertoak said:
where can i get it?
Click to expand...
Click to collapse
This is the link above (inside youtube video) - read... Click on youtube open in youtube, go to comment area just below (unhide) and download from link there -> ►https://bit.ly/3n3XRWc
Anton TNT said:
This is the link above (inside youtube video) - read...
Click to expand...
Click to collapse
I mean this UI attach
The firmware of the youtube video (UI3 - Ver. 7 - android 10) I already tried it and it slows down the machine too much.
albertoak said:
I mean this UI attach
The firmware of the youtube video (UI3 - Ver. 7 - android 10) I already tried it and it slows down the machine too much.
Click to expand...
Click to collapse
well then, I have a two more... just wait will share link (its uploading to my googledisk - about 15 min)
Here it is ... try with that one , this is for XTRONS branded devices
https://drive.google.com/file/d/182WrgQXoXHwJqTM3y3I9_aDjqd31PR5x/view?usp=sharing
Anton TNT said:
Here it is ... try with that one , this is for XTRONS branded devices
https://drive.google.com/file/d/182WrgQXoXHwJqTM3y3I9_aDjqd31PR5x/view?usp=sharing
Click to expand...
Click to collapse
friend. it is another UI that you send me. I keep telling you that I am looking for this UI:
albertoak said:
friend. it is another UI that you send me. I keep telling you that I am looking for this
Click to expand...
Click to collapse
I didn't realize , ok, but I will look for this specific firmware for you.
Anton TNT said:
I didn't realize , ok, but I will look for this specific firmware for you.
Click to expand...
Click to collapse
I have this version: 8227L_8鑫瑞畅UI01-国外11_v4_20210705 with that UI that I say I want. But that version of soft on my radio model is very, very slow. it works much better with this one: 8227L_CHS_UI04-10_v3_20191207 . Do you know of a way to extract the UI from the first one and add it to another?
albertoak said:
I have this version: 8227L_8鑫瑞畅UI01-国外11_v4_20210705 with that UI that I say I want. But that version of soft on my radio model is very, very slow. it works much better with this one: 8227L_CHS_UI04-10_v3_20191207 . Do you know of a way to extract the UI from the first one and add it to another
Click to expand...
Click to collapse
There is no need to extract anything, firmware is somewhere on this forum or somewhere on clouds services , we just have to find it on net.
Look there for upgrades : https://disk.yandex.ru/d/umCvHqCDzHccr/RockChip PX5 Android 8.0/XRC
From and by this pic inaside this folder your device has maybe XRC not CHS type of firmware, now just we can try to find software that matches UI4 dated year 2019 or early 2020 on the net.
But... I'm not sure wheter your device is PX5 chipset and what android version it has... (according to this picture inside - nb. 1 - UI is similar or that one that you pasted here)
PIC -> https://disk.yandex.ru/d/umCvHqCDzHccr/RockChip PX5 Android 8.0/XRC/XRC1_PX5_8.0_ota_l1.png
Some answers could be find here on these lnks / posts:
https://forum.xda-developers.com/t/...ndroid-head-unit.4007063/page-7#post-82217765
https://forum.xda-developers.com/t/collection-of-8227l-firmware-android-vers-6-9.4003935/page-1#post-82741349
LAST RESORT: (this is not tested---)
https://android8227lupdates.blogspot.com/2020/04/img-httpsimages.html
Anton TNT said:
I didn't realize , ok, but I will look for this specific firmware for you.
Click to expand...
Click to collapse
Anton TNT said:
Look there for upgrades : https://disk.yandex.ru/d/umCvHqCDzHccr/RockChip PX5 Android 8.0/XRC
From and by this pic inaside this folder your device has maybe XRC not CHS type of firmware, now just we can try to find software that matches UI4 dated year 2019 or early 2020 on the net.
But... I'm not sure wheter your device is PX5 chipset and what android version it has... (according to this picture inside - nb. 1 - UI is similar or that one that you pasted here)
PIC -> https://disk.yandex.ru/d/umCvHqCDzHccr/RockChip PX5 Android 8.0/XRC/XRC1_PX5_8.0_ota_l1.png
Some answers could be find here on these lnks / posts:
https://forum.xda-developers.com/t/...ndroid-head-unit.4007063/page-7#post-82217765
https://forum.xda-developers.com/t/collection-of-8227l-firmware-android-vers-6-9.4003935/page-1#post-82741349
LAST RESORT: (this is not tested---)
https://android8227lupdates.blogspot.com/2020/04/img-httpsimages.html
Click to expand...
Click to collapse
mmm very good information reported partner. How could I find out what chip I have exactly without having to disassemble?
albertoak said:
mmm very good information reported partner. How could I find out what chip I have exactly without having to disassemble?
Click to expand...
Click to collapse
Just take a brief video of your device info (about device in infotainment section), just to se what kind of system it is, for chip info we will google it.
Anton TNT said:
Just take a brief video of your device info (about device in infotainment section), just to se what kind of system it is, for chip info we will google it.
Click to expand...
Click to collapse
friend, this is the version that I would need. I have it on another older screen and it works perfectly with the UI that I mentioned. can I somehow extract it from this other screen?
albertoak said:
friend, this is the version that I would need. I have it on another older screen and it works perfectly with the UI that I mentioned. can I somehow extract it from this other screen?
Click to expand...
Click to collapse
XRC(H) ok let's find that by googling, which Android version is ? Fake Android 10 (chinese 8.1 oreo)?
Anton TNT said:
XRC(H) ok let's find that by googling, which Android version is ? Fake Android 10 (chinese 8.1 oreo)?
Click to expand...
Click to collapse
How can I see if it is fake android 10? In device information it appears as android 10.