UI apps FF-5000 8227L firmware - Android Head-Units

Hello. I come from this thread:
Alps FF5000 and other AC8227L chipset head units - updates and solutions
Hello ! I have trouble with bought alps device car head unit FF5000 (model 8227L). System freezes, process com.ts.mainUI8 hanging not allowing to enter and listen any kind of music, dsp worked now just blinks and does nothing, buttons dont work...
forum.xda-developers.com
MCU:TS907.190518(H)
Which helped me a lot. Since I bought a radio on aliexpress ALPS FF-5000 1gbram (real)/16gbrom. That I arrive with a very current firmware and makes the radio work quite slow. After trying various firmware. I can see that the best of all of that thread and the smoothest it works is:
8227L_CHS_UI04-国外10_v3_20191207.rar
I already bought more radios like these from the seller before and they had a different UI than now and they worked frankly well... more fluid. Could someone tell me where to get this UI:
Thank you and continue advancing in this great forum.

albertoak said:
Hello. I come from this thread:
Alps FF5000 and other AC8227L chipset head units - updates and solutions
Hello ! I have trouble with bought alps device car head unit FF5000 (model 8227L). System freezes, process com.ts.mainUI8 hanging not allowing to enter and listen any kind of music, dsp worked now just blinks and does nothing, buttons dont work...
forum.xda-developers.com
MCU:TS907.190518(H)
Which helped me a lot. Since I bought a radio on aliexpress ALPS FF-5000 1gbram (real)/16gbrom. That I arrive with a very current firmware and makes the radio work quite slow. After trying various firmware. I can see that the best of all of that thread and the smoothest it works is:
8227L_CHS_UI04-国外10_v3_20191207.rar
I already bought more radios like these from the seller before and they had a different UI than now and they worked frankly well... more fluid. Could someone tell me where to get this UI:
Thank you and continue advancing in this great forum.
Click to expand...
Click to collapse
Hi try with this software from JUNSUN it helped my device, we have simialr ones.
Download firmware from comment area in video and update device.

Then , when updated , go to factory menu with pin code 8888 and adjust settings for device (RADIO MENU , OTHER, DISPLAY and TOUCH STUDY/CANBUS - these two menus - if you must make steering wheel command s to work.).
FOR RADIO MENU :
- if radio.app is stalling or freezes - set OSCILACION to 9,20, FM and AM sense to 21-27, RDS ON, IC TYPE is your chip of radio (do not change that as these if wrong will freeze radio and commands), SORT is RADIO FREQ
- if radio freezes after bootup and wont response at all - try this app :
(just download file and transfer to device, then get in APK installer and install radio from this apk file)

Anton TNT said:
Hi try with this software from JUNSUN it helped my device, we have simialr ones.
Download firmware from comment area in video and update device.
Click to expand...
Click to collapse
Thank you. But I'm looking for the UI in the photo of the first post. do you know what version it is?

It's UI3 - Ver. 7 - android 10

Anton TNT said:
It's UI3 - Ver. 7 - android 10
Click to expand...
Click to collapse
where can i get it?

albertoak said:
where can i get it?
Click to expand...
Click to collapse
This is the link above (inside youtube video) - read... Click on youtube open in youtube, go to comment area just below (unhide) and download from link there -> ►https://bit.ly/3n3XRWc

Anton TNT said:
This is the link above (inside youtube video) - read...
Click to expand...
Click to collapse
I mean this UI attach
The firmware of the youtube video (UI3 - Ver. 7 - android 10) I already tried it and it slows down the machine too much.

albertoak said:
I mean this UI attach
The firmware of the youtube video (UI3 - Ver. 7 - android 10) I already tried it and it slows down the machine too much.
Click to expand...
Click to collapse
well then, I have a two more... just wait will share link (its uploading to my googledisk - about 15 min)

Here it is ... try with that one , this is for XTRONS branded devices
https://drive.google.com/file/d/182WrgQXoXHwJqTM3y3I9_aDjqd31PR5x/view?usp=sharing

Anton TNT said:
Here it is ... try with that one , this is for XTRONS branded devices
https://drive.google.com/file/d/182WrgQXoXHwJqTM3y3I9_aDjqd31PR5x/view?usp=sharing
Click to expand...
Click to collapse
friend. it is another UI that you send me. I keep telling you that I am looking for this UI:

albertoak said:
friend. it is another UI that you send me. I keep telling you that I am looking for this
Click to expand...
Click to collapse
I didn't realize , ok, but I will look for this specific firmware for you.

Anton TNT said:
I didn't realize , ok, but I will look for this specific firmware for you.
Click to expand...
Click to collapse
I have this version: 8227L_8鑫瑞畅UI01-国外11_v4_20210705 with that UI that I say I want. But that version of soft on my radio model is very, very slow. it works much better with this one: 8227L_CHS_UI04-10_v3_20191207 . Do you know of a way to extract the UI from the first one and add it to another?

albertoak said:
I have this version: 8227L_8鑫瑞畅UI01-国外11_v4_20210705 with that UI that I say I want. But that version of soft on my radio model is very, very slow. it works much better with this one: 8227L_CHS_UI04-10_v3_20191207 . Do you know of a way to extract the UI from the first one and add it to another
Click to expand...
Click to collapse
There is no need to extract anything, firmware is somewhere on this forum or somewhere on clouds services , we just have to find it on net.

Look there for upgrades : https://disk.yandex.ru/d/umCvHqCDzHccr/RockChip PX5 Android 8.0/XRC
From and by this pic inaside this folder your device has maybe XRC not CHS type of firmware, now just we can try to find software that matches UI4 dated year 2019 or early 2020 on the net.
But... I'm not sure wheter your device is PX5 chipset and what android version it has... (according to this picture inside - nb. 1 - UI is similar or that one that you pasted here)
PIC -> https://disk.yandex.ru/d/umCvHqCDzHccr/RockChip PX5 Android 8.0/XRC/XRC1_PX5_8.0_ota_l1.png
Some answers could be find here on these lnks / posts:
https://forum.xda-developers.com/t/...ndroid-head-unit.4007063/page-7#post-82217765
https://forum.xda-developers.com/t/collection-of-8227l-firmware-android-vers-6-9.4003935/page-1#post-82741349
LAST RESORT: (this is not tested---)
https://android8227lupdates.blogspot.com/2020/04/img-httpsimages.html

Anton TNT said:
I didn't realize , ok, but I will look for this specific firmware for you.
Click to expand...
Click to collapse
Anton TNT said:
Look there for upgrades : https://disk.yandex.ru/d/umCvHqCDzHccr/RockChip PX5 Android 8.0/XRC
From and by this pic inaside this folder your device has maybe XRC not CHS type of firmware, now just we can try to find software that matches UI4 dated year 2019 or early 2020 on the net.
But... I'm not sure wheter your device is PX5 chipset and what android version it has... (according to this picture inside - nb. 1 - UI is similar or that one that you pasted here)
PIC -> https://disk.yandex.ru/d/umCvHqCDzHccr/RockChip PX5 Android 8.0/XRC/XRC1_PX5_8.0_ota_l1.png
Some answers could be find here on these lnks / posts:
https://forum.xda-developers.com/t/...ndroid-head-unit.4007063/page-7#post-82217765
https://forum.xda-developers.com/t/collection-of-8227l-firmware-android-vers-6-9.4003935/page-1#post-82741349
LAST RESORT: (this is not tested---)
https://android8227lupdates.blogspot.com/2020/04/img-httpsimages.html
Click to expand...
Click to collapse
mmm very good information reported partner. How could I find out what chip I have exactly without having to disassemble?

albertoak said:
mmm very good information reported partner. How could I find out what chip I have exactly without having to disassemble?
Click to expand...
Click to collapse
Just take a brief video of your device info (about device in infotainment section), just to se what kind of system it is, for chip info we will google it.

Anton TNT said:
Just take a brief video of your device info (about device in infotainment section), just to se what kind of system it is, for chip info we will google it.
Click to expand...
Click to collapse
friend, this is the version that I would need. I have it on another older screen and it works perfectly with the UI that I mentioned. can I somehow extract it from this other screen?

albertoak said:
friend, this is the version that I would need. I have it on another older screen and it works perfectly with the UI that I mentioned. can I somehow extract it from this other screen?
Click to expand...
Click to collapse
XRC(H) ok let's find that by googling, which Android version is ? Fake Android 10 (chinese 8.1 oreo)?

Anton TNT said:
XRC(H) ok let's find that by googling, which Android version is ? Fake Android 10 (chinese 8.1 oreo)?
Click to expand...
Click to collapse
How can I see if it is fake android 10? In device information it appears as android 10.

Related

CASKA Android Pro

I have a CASKA android Pro head unit. This uses RK3066. Android version 4.4.2
Do we have a ROM development for this?
My problems are,
1. The device loads Radio as soon as it boots. I want it to load home screen with Launcher.
2. The RADIO app doesn't auto search and store the stations. So, I need a better radio app.
3. The steering wheel control works only with native music app. I want to make it work with PlayerPro. (Can this be done using Xposed? Does it need rooting?)
NOTE:
I have an update.img file located in root of internal memory. Will this help?
Thanks in advance!
Root Caska Android Pro
Hello guys follow some tips that are having problems with the central multimedia of Caska .
Got the central Caska Android Pro
RK3066 processor 1G Ram 1024x600 resolution
From what I have researched Android Pro hardware models are all the same .
Here some indications
1- Root - Use NewKingrootV4.82_C1
2 great program for automating some settings- XposedMTC_v1.4.2
Any doubt inbox
I'm brazilian. [email protected]
praveenkv1988 said:
I have a CASKA android Pro head unit. This uses RK3066. Android version 4.4.2
Do we have a ROM development for this?
My problems are,
1. The device loads Radio as soon as it boots. I want it to load home screen with Launcher.
2. The RADIO app doesn't auto search and store the stations. So, I need a better radio app.
3. The steering wheel control works only with native music app. I want to make it work with PlayerPro. (Can this be done using Xposed? Does it need rooting?)
NOTE:
I have an update.img file located in root of internal memory. Will this help?
Thanks in advance!
Click to expand...
Click to collapse

Requires MCU firmware for HU with Allwinner R16 Quad-core

Looking for MCU firmware versions
5.3.19-63-xx-C03101-yymmdd
5.3.19-22-xx-E56201-161025 firmware was found https://drive.google.com/file/d/1tcoJ0U8J-ESXOMNZGDzh4k_c_yeSLbRq/view?usp=sharing (Thx MERCEDES_W203)
where xx - does not matter
yymmdd - firmware release date
How to get a backup copy of the MCU firmware from HU
1. Need root.
2. You must install the terminal emulator from Google Play.
3. Run the commands in the terminal emulator
To save on usb stick
Code:
su
cd /dev/block/by-name
dd if=private of=/usb0/private.img bs=4096
or
Code:
su
cd /dev/block/by-name
dd if=private of=/usb1/private.img bs=4096
To save to the SD card, if available
Code:
su
cd /dev/block/by-name
dd if=private of=/extsd0/private.img bs=4096
or
Code:
su
cd /dev/block/by-name
dd if=private of=/extsd1/private.img bs=4096
4. We will get a file private.img, size 16 MB
5. Give a link to the file or attach here.
How to make a backup copy of the MCU firmware using Backup_copy.apk (View attachment Backup_copy.apk)
1. Install the program Backup_copy.apk
2. Press the button Make a copy "MCU"
3. We will get a file /sdcard/MCU.img, size 16 MB
4. Give a link to the file or attach here.
Thank you.
Mistaken with the version of one of the firmware.
Need such firmware 5.3.19-22-xx-E56201-yymmdd
****-jones said:
Mistaken with the version of one of the firmware.
Need such firmware 5.3.19-22-xx-E56201-yymmdd
Click to expand...
Click to collapse
Hello my friend
Im not sure if I can help, but Ive found in my computer the backup of native 4.4.4 firmware of my HU made before the italian seller sent me firmware update : https://forum.xda-developers.com/showpost.php?p=75612912&postcount=137
As you know Ive made a post also on 4PDA : http://4pda.ru/forum/index.php?s=&showtopic=792456&view=findpost&p=71019608
FIRMWARE ANDROID 4.4.4 https://drive.google.com/file/d/1oeN_dqGmXqSqGY_RauFN56ljv9Wso5ct/view?usp=sharing
FIRMWARE ANDROID 5.1.1 https://drive.google.com/file/d/1z-HPRDeielPxQAZR9aymbmeqOfCbfMjK/view?usp=sharing
As you see they both had MCU 5.3.16-22-B0-E50201-150818
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you don't have a way to get MCU firmware from those firmwares let me know if I can downgrade my HU to 4.4.4 and then get backup of MCU and link here
Maybe this will be the right time to find manufacture of this "fake audiosources HWID 22" wich is 34 as you know and as you see:
Just to let you know, Ive sent emails and messaged with all audiosources online support and nobody told me answers about this MCU
MERCEDES_C_W203 said:
Maybe this will be the right time to find manufacture of this "fake audiosources HWID 22" wich is 34 as you know and as you see
Click to expand...
Click to collapse
This is not "fake"!
22 in hexadecimal is equal to 34 in decimal
I'll look at the links that you gave.
Oh ok sorry
Maybe Ive made wrong translation from 4PDA where people talk about that HW ID
Thanks a lot :good:
****-jones said:
This is not "fake"!
22 in hexadecimal is equal to 34 in decimal
I'll look at the links that you gave.
Click to expand...
Click to collapse
MERCEDES_C_W203 said:
Hello my friend
Im not sure if I can help, but Ive found in my computer the backup of native 4.4.4 firmware of my HU made before the italian seller sent me firmware update : https://forum.xda-developers.com/showpost.php?p=75612912&postcount=137
As you know Ive made a post also on 4PDA : http://4pda.ru/forum/index.php?s=&showtopic=792456&view=findpost&p=71019608
FIRMWARE ANDROID 4.4.4 https://drive.google.com/file/d/1oeN_dqGmXqSqGY_RauFN56ljv9Wso5ct/view?usp=sharing
FIRMWARE ANDROID 5.1.1 https://drive.google.com/file/d/1z-HPRDeielPxQAZR9aymbmeqOfCbfMjK/view?usp=sharing
If you don't have a way to get MCU firmware from those firmwares let me know if I can downgrade my HU to 4.4.4 and then get backup of MCU and link here
Click to expand...
Click to collapse
Updating the android and updating the mcu are two different processes.
I looked at the links that you gave. They do not contain the firmware that you had (5.3.16-22-B0-E50201-150818)
I have a question. Where did you get the firmware 5.3.17-22-12-E50201-150926? Can you give it?
MERCEDES_C_W203 said:
...
Click to expand...
Click to collapse
you can make photo of the decoder of the can-bus?
****-jones said:
Where did you get the firmware 5.3.17-22-12-E50201-150926? Can you give it?
Click to expand...
Click to collapse
Ive got it from here https://forum.xda-developers.com/an...s/how-to-update-quadcore-r16-tonghai-t3635779 (nosidefcp thread Final FW recomended with root included) https://yadi.sk/d/suOSRwtd3KSbw4
About 5.3.16-22-B0-E50201-150818 it was in my HU as I bought it, never made any changes until firmware update 5.1.1 (I dont know if the italian seller changed the original MCU firmware before sell it)
About decoder of the can-bus picture, the HU is not dismounted but I still have other cables in the HU box:
MERCEDES_C_W203 said:
Ive got it from here https://forum.xda-developers.com/an...s/how-to-update-quadcore-r16-tonghai-t3635779 (nosidefcp thread Final FW recomended with root included) https://yadi.sk/d/suOSRwtd3KSbw4
About 5.3.16-22-B0-E50201-150818 it was in my HU as I bought it, never made any changes until firmware update 5.1.1 (I dont know if the italian seller changed the original MCU firmware before sell it)
About decoder of the can-bus picture, the HU is not dismounted but I still have other cables in the HU box:
Click to expand...
Click to collapse
Did you update yourself?
In the links to the update to android 6 there are no firmware that contains firmware MCU.
I can not understand at what moment the mcu firmware changed.
Can bus decoder look like this
Can you ask the seller for a mcu firmware 5.3.16-22-B0-E50201-150818?
****-jones said:
Did you update yourself?
In the links to the update to android 6 there are no firmware that contains firmware MCU.
I can not understand at what moment the mcu firmware changed.
Ive updated to android 6 following nosidefcp's thread using that firmware V7.3.1_20170610.110122_KED1-mod after Ive used 2 other firmware trying to find a way to fix my problems with SWC:
https://drive.google.com/file/d/1XqZ5VlJT_-QZCkaLVsAjuKIc5RX6-nxI/view?usp=sharing V7.3.2_20170908.095919_TW2-mod
https://drive.google.com/file/d/1Btc66h3iz-tZhlE9Ien-VTjCJk7CYbNc/view?usp=sharing V7.3.2_20171116.202256_KED1-mod
Can bus decoder look like this
Can you ask the seller for a mcu firmware 5.3.16-22-B0-E50201-150818?
Click to expand...
Click to collapse
Ive already asked him but he doesn't reply to me anymore
---------- Post added at 10:27 PM ---------- Previous post was at 10:00 PM ----------
****-jones said:
CAN BUS DECODER
Click to expand...
Click to collapse
This video was made by the seller, you can see the can bus decoder, I hope is useful
https://www.youtube.com/watch?v=V9xIWjqAzBg
MERCEDES_C_W203 said:
Ive already asked him but he doesn't reply to me anymore
Click to expand...
Click to collapse
Make a backup copy of the mcu firmware, as written in the first post and give me the file MCU.img.
I'll see what's inside.
****-jones said:
Make a backup copy of the mcu firmware, as written in the first post and give me the file MCU.img.
I'll see what's inside.
Click to expand...
Click to collapse
MCU at moment in my HU
https://drive.google.com/file/d/1TXsor1p15jN_tpGSptx7YX8LGeP6HKH_/view?usp=sharing
MERCEDES_C_W203 said:
MCU at moment in my HU
https://drive.google.com/file/d/1TXsor1p15jN_tpGSptx7YX8LGeP6HKH_/view?usp=sharing
Click to expand...
Click to collapse
The video can not see the inscriptions on can bus decoder
This is what mcu contains
There is no version 5.3.17-22-B0-E50201-150926
Try to choose a model VW OBD(RZC)(5.3.17, CONFIG, RDS, Color, BC6, NODVD, TDA7719, TEF662x)
Version of the mcu - 5.3.17-22-13-E50201-150926
****-jones said:
The video can not see the inscriptions on can bus decoder
This is what mcu contains
There is no version 5.3.17-22-B0-E50201-150926
Try to choose a model VW OBD(RZC)(5.3.17, CONFIG, RDS, Color, BC6, NODVD, TDA7719, TEF662x)
Version of the mcu - 5.3.17-22-13-E50201-150926
Click to expand...
Click to collapse
Tomorrow I will try to dismount HU and take pic of can bus decoder, and once dismounted I will open also HU and take pics of hardware (I hope I dont break my car )
Now I look for MCU 5.3.17-22-13-E50201-150926 and I hope the HU seller will reply to me :good:
Thanks for now
MERCEDES_C_W203 said:
Tomorrow I will try to dismount HU and take pic of can bus decoder, and once dismounted I will open also HU and take pics of hardware (I hope I dont break my car )
Now I look for MCU 5.3.17-22-13-E50201-150926 and I hope the HU seller will reply to me :good:
Thanks for now
Click to expand...
Click to collapse
Do not look for the firmware, just choose a model VW OBD(RZC)(5.3.17, CONFIG, RDS, Color, BC6, NODVD, TDA7719, TEF662x) in Extra settings-Model choose
After the choice, do not touch anything in the car, absolutely nothing until the HU does reboot!
****-jones said:
Do not look for the firmware, just choose a model VW OBD(RZC)(5.3.17, CONFIG, RDS, Color, BC6, NODVD, TDA7719, TEF662x) in Extra settings-Model choose
Click to expand...
Click to collapse
Ive tried VW OBD(RZC) VW OBD(SS) and VW OBD(5.3.17 but still same problem with SWC, Ive tried to set it with a "click" and "holding" but it doesn't save
I really dont know how original MCU changed from 5.1.1. to 6.0.1 .
The seller now has got same model but with WINCE 6.0 and there are some more info about HU, maybe can help:
Type: Gps Navigator
Use: Automotive
Screen Size: 7 inch
Function: Touch Screen, Bluetooth-enabled, Mp3/Mp4, DVD/VCD, Photo Viewer, Radio Tuner
Place of Origin: Guangdong, China (Mainland)
Brand Name: HUIFEI
Model Number: KGL-7508
Warranty: 1 Years
Support LRC: Lyrics synchronized display
GPS Channel: 64Channels
GPS: MTK MT3336N ------800MHZ + 250MHZ DSP
GPS Frequency: 1.57542GHZ
Multi-language Menu OSD Language: Italian,Turkish,Portuguese,French,Polish,Arabic,Hebrew
Disc: Virtual 4-disc
EQ: 32HZ - 16KHZ (10 parts digital EQ tone adjustment)
button backlight colors: 7
HD: 1080P
Processor: 800MHZ
Packaging & Delivery
Packaging Details: GW/pcs:2.92KG V/pcs:32.5cm*25cm*16.5cm
Delivery Detail: 2-3days after receiving your payment
Specifications
car GPS Navigation
1.Support original steering wheel control
2.Memory: SK HYNIX/SAM. 256MB DDR 3 SDRAM
3.Support 3G/WIFI
huifei Wince car GPS Navigation with steering wheel control,3G,Wifi for Benz C-Class W203 (2004-2007),Benz CLK W209(2004-2011)
If you need more pics about HU please tell me before I mount it back
I hope you can find all informations and details now about this HU
MERCEDES_C_W203 said:
Ive tried VW OBD(RZC) VW OBD(SS) and VW OBD(5.3.17 but still same problem with SWC, Ive tried to set it with a "click" and "holding" but it doesn't save
Click to expand...
Click to collapse
Thank you for the photo. But unfortunately I did not see the necessary information
You have tried VW OBD (RZC) VW OBD (SS) and VW OBD. But I did not understand whether the MCU version was changing or not?
What does it mean "Ive tried to set it with a "click" and "holding" but it doesn't save" ?
****-jones said:
Thank you for the photo. But unfortunately I did not see the necessary information
You have tried VW OBD (RZC) VW OBD (SS) and VW OBD. But I did not understand whether the MCU version was changing or not?
What does it mean "Ive tried to set it with a "click" and "holding" but it doesn't save" ?
Click to expand...
Click to collapse
About MCU if there's some specific firmware do install could you link me it ? Maybe it will replace also MCU
Please, if you need other pics I will make, tell me if you need to see something more specific informations.
When I open SWC setup I click to "start" I click to "volume up" for example, then I "click" on "volume up" of SWC but on setup it doesn't save it, same thing is I "hold" on "volume up" on SWC
MERCEDES_C_W203 said:
When I open SWC setup I click to "start" I click to "volume up" for example, then I "click" on "volume up" of SWC but on setup it doesn't save it, same thing is I "hold" on "volume up" on SWC
Click to expand...
Click to collapse
Can you show a screenshot or video?
As far as I know, if you have a cab bus decoder, then the information about the button press comes from the can bus through the decoder. Then the main role is played by the firmware MCU, which now does not correspond to the model of auto.

Help identify MCU version (PX6)

Hello,
can someone help me to identify the MCU version of my PX6 unit?
I would like to install a mod rom like Malaysk but I can't understand if it is compatible.
This is what is reported in the system info:
MCUVer: DH191029T412188X600000000
FameworkVer: 9 PQ2A.190305.002 eng.work220191220.100202
AndroidVer: 9
APPVer: 2019122301T_1280x480_970
Nandflash: 21.42/22.52G
RAM: 4G
Resolution: 1280x480
Thank you
Hey,
I also have the same unit, (but 2GB) and looking to find the Factory Settings code...
Seller told me "3368" - No, this is a wrong password .
if someone knows, can you please reply?
link46 said:
Hello,
can someone help me to identify the MCU version of my PX6 unit?
I would like to install a mod rom like Malaysk but I can't understand if it is compatible.
This is what is reported in the system info:
MCUVer: DH191029T412188X600000000
FameworkVer: 9 PQ2A.190305.002 eng.work220191220.100202
AndroidVer: 9
APPVer: 2019122301T_1280x480_970
Nandflash: 21.42/22.52G
RAM: 4G
Resolution: 1280x480
Thank you
Click to expand...
Click to collapse
No there is no single custom ROM available.
Should have been really easy to verify that yourself...
Yours is called DH191029
You don´t have a MCU named: MTCD, MTCE or STM32
Neither of these MCU matches yours...
Hi rigattoni, it might be some custom Chinese SoC?
It looks it’s still ARM... Hm, does DH-1666 tells you anything? They sell it as 4 or 6 core 1.6GHz. Looks like a ref design with custom LCD config.
Anyway, ideas where to search (except of gooogle) would help.
Thanks
alliv2000 said:
Hi rigattoni, it might be some custom Chinese SoC?
It looks it’s still ARM... Hm, does DH-1666 tells you anything? They sell it as 4 or 6 core 1.6GHz. Looks like a ref design with custom LCD config.
Anyway, ideas where to search (except of gooogle) would help.
Thanks
Click to expand...
Click to collapse
SoC may be not, but the "underwear" is different with other MCU.
...and sorry, I have no clue about these units.
Hi all,
I've found a password for "Factory Settings", it is "1314".

Firmware upgrade and new custom scheme to: MCUVER: RL78c_NCHHWY_F070P

Hi, I'm new here and I'm writing via translator so I apologize in advance.
I recently bought a radio for a Mitsubishi Lancer X and according to the videos I should change the look, boot logo but I can't.
I have a password for the settings, even there is no such option.
I would just like the look that is here in the video.
- video was blocked (schema is KD Red)
My setup:
MCUVER: RL78c_NCHHWY_F070P
FrameworkVer: px6-userdebug 9 P12A.190305.002 eng.work2.20200520.1112957 test-keys
OSVer: 9 Mon May 18 16:43:35 CST 2020
APPVer: 20200611V2-1024x768-960C-chwy
Nandflash: 40GB/64GB
RAM: 3G/4G
BTVer: SD_carplay_I2S_20200306_sdk 1.7
Barcode: ZF_1259X02020065131
I wrote to phoenix automotive but they can't help me. The radio is not from them. They only recommended an app to change the look, but I don't want it, it will slow down the system.
So:
I have a logo change application but I can't change the boot logo or change the template. The radio does not have such a setting.
The radio does not have root.
Is there any way to solve my problem?
thank you for your time
Sup man, i guess your looking for my theme video [emoji16]. The theme is from a custom firmware, you will need to change from the default one to it.
The problem is the developer charge for the firmware.
Sent from my SM-G988U1 using Tapatalk
Prometheus_CZ said:
Hi, I'm new here and I'm writing via translator so I apologize in advance.
I recently bought a radio for a Mitsubishi Lancer X and according to the videos I should change the look, boot logo but I can't.
I have a password for the settings, even there is no such option.
I would just like the look that is here in the video.
- video was blocked (schema is KD Red)
My setup:
MCUVER: RL78c_NCHHWY_F070P
FrameworkVer: px6-userdebug 9 P12A.190305.002 eng.work2.20200520.1112957 test-keys
OSVer: 9 Mon May 18 16:43:35 CST 2020
APPVer: 20200611V2-1024x768-960C-chwy
Nandflash: 40GB/64GB
RAM: 3G/4G
BTVer: SD_carplay_I2S_20200306_sdk 1.7
Barcode: ZF_1259X02020065131
I wrote to phoenix automotive but they can't help me. The radio is not from them. They only recommended an app to change the look, but I don't want it, it will slow down the system.
So:
I have a logo change application but I can't change the boot logo or change the template. The radio does not have such a setting.
The radio does not have root.
Is there any way to solve my problem?
thank you for your time
Click to expand...
Click to collapse
Hi, I also have a Mitsubishi Lancer and recently bought a PX6 (model ZF-1259S branded by ZhiFang). I was able to change both the boot logo and car image from the home screen through the "Boot image" and "Advanced settings" in the system menu. If it asks for a password try 8861, that worked for me.
I don't know if you saw this, but this video from Phoenix Auto also shows how to change the car image manually copying the file:
Hope it works for you. Cheers from Brazil.
Prometheus_CZ said:
Hi, I'm new here and I'm writing via translator so I apologize in advance.
I recently bought a radio for a Mitsubishi Lancer X and according to the videos I should change the look, boot logo but I can't.
I have a password for the settings, even there is no such option.
I would just like the look that is here in the video.
- video was blocked (schema is KD Red)
My setup:
MCUVER: RL78c_NCHHWY_F070P
FrameworkVer: px6-userdebug 9 P12A.190305.002 eng.work2.20200520.1112957 test-keys
OSVer: 9 Mon May 18 16:43:35 CST 2020
APPVer: 20200611V2-1024x768-960C-chwy
Nandflash: 40GB/64GB
RAM: 3G/4G
BTVer: SD_carplay_I2S_20200306_sdk 1.7
Barcode: ZF_1259X02020065131
I wrote to phoenix automotive but they can't help me. The radio is not from them. They only recommended an app to change the look, but I don't want it, it will slow down the system.
So:
I have a logo change application but I can't change the boot logo or change the template. The radio does not have such a setting.
The radio does not have root.
Is there any way to solve my problem?
thank you for your time
Click to expand...
Click to collapse
Hey there,
I was wondering if you ever found the factory firmware file for your head unit?
I have the Zhi Fang (This is the manufacturer of almost all of the tesla style head units.)
ZF1116s it has the same specs as your head unit exactly. As a side note I have already tried custom firmware from another fellow on here. It is good firmware, and adds a lot to the unit, but it does not restore functionality that the unit originally shipped with.
So yeah, if you have a file, or a link to it, I would be most grateful.
Thanks, Rick
Prometheus_CZ said:
Hi, I'm new here and I'm writing via translator so I apologize in advance.
I recently bought a radio for a Mitsubishi Lancer X and according to the videos I should change the look, boot logo but I can't.
I have a password for the settings, even there is no such option.
I would just like the look that is here in the video.
- video was blocked (schema is KD Red)
My setup:
MCUVER: RL78c_NCHHWY_F070P
Click to expand...
Click to collapse
So I have the RL78c head unit (for a slightly different model), and I did get mine from Phoenix. I asked them about the password for the 'system info' screen and they said that this unit doesn't have that, it's locked by the manufacturer. The only settings you have access to is the install set menu (the 8861 one). I'm not sure if those other settings exist and are just hidden elsewhere, or they just don't exist in this model of head unit.
rigattoni said:
Well... you don´t tell us which MCU and firmware is used.
BTW: That sounds like an issue in the CAN settings, that has nothing to do with the head unit itself.
Are you sure that you got the right unit for your car?
Click to expand...
Click to collapse
Yes is the right unit for my car, everything else works perfect.
It seems like every time the car is off that emergency light button is out of power, so when I start the car the lights will start flashing and have to press the button again to stop it.
I have talk with the manufacturer and have no solution.

Telefunken Tices-719BTS Android Head Unit Update

Hi Everyone
I have a telefunken tices-719btgps Double Din Android Head Unit for my truck. I am pretty sure this is a generic rebranded unit and currently running Android 5.1.1. As seen in the pictures below is all the info i have about this head unit and want to try and upgrade it to a later version of Android or a more stable version with better functionality. However when checking / googling the MCU version i cant seem to find anything online. I have had my fair share of experience with Android Tablets and Devices but never tried to upgrade a head unit. Can anyone give me advice on how to get the correct image or where to find it by the information below.
There is absolutely no support for this unit online or from Telefunken. Any help would be appreciated.
Ok forum does not want me to post images so ill list the info below:
Android Version - 5.1.1
CPU Info - Intel Atom 4QuadCore, GPU4D: Mali-450 MP4
System Info - APP 1024x600 2016-11-01 14:51:40
MCU Version - 2016-11-23 15:55:14 WK_(NOR)_90_C9_R76_V1.00719TA
BT Version - 5.1.1-eng.gogo.20161025.100433-22
CAN Version - Unkown
From The system updates screen:
MCU Version - 20161123155514
OS Version - 40041
APP Version - 201611011451
CAN Version - 2131298980 Latest Version
Hi, not an MTCx unit, so unlikely anyone reading here know your unit. Requesting mod moves to Android Head units section.
Suggest taking a little more time to search for your headunit, try searching for text portions of your MCU type and you might find discussion/posts for your unit.
E.g. 90_C9_R76

Categories

Resources