Related
Hello,
This morning I tried to root my phone so that I can force everything to be moved to a sd card since the storage of the system is low not enough to install apps and to install A mod that is more updated then the current GingerBread OS.
I managed to soft brick the device the rom clearly said e405 obviously the developer has a few bugs anyway I manage to recover from my soft brick by A software 'KDZ' Only issue I have now is when I press volume up on boot I get A notice icon trying to say something (image of the icon is attached below) and when I use ROM Manager to reboot to recovery it will attempt to go there, Instead of going to recovery it goes to A loading page then this erases all my data/apps except SuperUser/Root.
Tried everything and it still does it?
When I use the LG Emergency Software it just goes to a page saying not responding??
Any help and ideas would be grateful so I can fix this issue and move on also im mostly A samsung user and im fairly new to lg.
See thee error message below
Once i get the idea of what the icon is actually trying to say I should be in the right direction.
Thanks,
Spudster
umm
Anyone??
Spudster1 said:
Anyone??
Click to expand...
Click to collapse
Perhaps you can go to ROM Manager, uninstall Recovery, then re-install it?
I don't really know. I'm sorta new to this stuff.
hard reset
Spudster1 said:
Hello,
This morning I tried to root my phone so that I can force everything to be moved to a sd card since the storage of the system is low not enough to install apps and to install A mod that is more updated then the current GingerBread OS.
I managed to soft brick the device the rom clearly said e405 obviously the developer has a few bugs anyway I manage to recover from my soft brick by A software 'KDZ' Only issue I have now is when I press volume up on boot I get A notice icon trying to say something (image of the icon is attached below) and when I use ROM Manager to reboot to recovery it will attempt to go there, Instead of going to recovery it goes to A loading page then this erases all my data/apps except SuperUser/Root.
Tried everything and it still does it?
When I use the LG Emergency Software it just goes to a page saying not responding??
Any help and ideas would be grateful so I can fix this issue and move on also im mostly A samsung user and im fairly new to lg.
See thee error message below
Once i get the idea of what the icon is actually trying to say I should be in the right direction.
Thanks,
Spudster
Click to expand...
Click to collapse
I saw that icon after flashing back to stock rom with KDZ and a hard reset worked for me. Pull the battery, make sure you not connected to USB or charger, then press and hold home key and down volume while you press power on. Release power when you see LG logo, hold the down and home for a while until you see android unpacking a box. It takes about a minute to see this, so you gotta wait for it. The phone reboots or shut downs, don't rememberwhich
reply
kurtstraker said:
I saw that icon after flashing back to stock rom with KDZ and a hard reset worked for me. Pull the battery, make sure you not connected to USB or charger, then press and hold home key and down volume while you press power on. Release power when you see LG logo, hold the down and home for a while until you see android unpacking a box. It takes about a minute to see this, so you gotta wait for it. The phone reboots or shut downs, don't rememberwhich
Click to expand...
Click to collapse
Ok I will try that and let you know if it works in a few hours I gave the phone to my brother for free since I bought A samsung (used to samsungs and love then
Anyway should also mention that when I try to reboot into recovery with rom manager it reboots goes to the loading box thing then it wipes my data Like i said I tried that method in a few hours and get back to you here.
nope
didn't work ;.(
Man go to the screen u have posted the images above , then use KDZ to flash back Man!
This is "DIAG MODE" so select it in KDZ program
So select KDZ file ( download if u have tried urs so far)
No error .. when u click to start upgrade ur phone will apper in emergency mode. Then the KDZ will flash flawslessly
Sent From ... Lg e400 <-- {[Brasilian Here]}
Still didnt work it flash though but still didnt fix the recovery..
These lg are actually useless a simple firmware flash should do the job.
LG staff are also rude to be honest rang up and because I tried to root and I was doing the right thing going back to stock they denied support and hang up without me giving A reply. Glad ive switched back to samsung s4 and Apple IPhone 5C.
Thanks for attempting to help :.)
Hello, i have a blackberry Priv that is stuck on logo and just keeps on restarting and doesnt go to the main screen....how to solve this problem? CAn i solve it by flashing with autoloader
Also, i cant turn on the phone to main screen,
How do i know if it is version:
STV100-1,
STV100-2,
STV100-3,
STV100-4 OR
STV100-5
I downloaded autoloader for STV100-1 and installed drivers too. Now i put phone in fastboot mode by pressing power key and vol - key. I connect phone to pc and run autoloader but window appears and disappears. How to flash this phone and repair this phone....someone pls help
thanks
andrew21 said:
Hello, i have a blackberry Priv that is stuck on logo and just keeps on restarting and doesnt go to the main screen....how to solve this problem? CAn i solve it by flashing with autoloader
Also, i cant turn on the phone to main screen,
How do i know if it is version:
STV100-1,
STV100-2,
STV100-3,
STV100-4 OR
STV100-5
I downloaded autoloader for STV100-1 and installed drivers too. Now i put phone in fastboot mode by pressing power key and vol - key. I connect phone to pc and run autoloader but window appears and disappears. How to flash this phone and repair this phone....someone pls help
thanks
Click to expand...
Click to collapse
Hi,
If you don't know the model #, then don't flash...
I read that Hard Reset of the device is needed, by pressing and holding the volume up and down keys simultaneously for at least 10 seconds, when you reach the error screen
Charkatak said:
Hi,
If you don't know the model #, then don't flash...
I read that Hard Reset of the device is needed, by pressing and holding the volume up and down keys simultaneously for at least 10 seconds, when you reach the error screen
Click to expand...
Click to collapse
I tried to hard reset, enter bootloader mode, enter recovery mode but its all in vain. Moment phone goes to bootloader mode for enter into fastboot it restarts.
By pressing Volume up + Power it takes me to recovery mode there it shows error and again restarts.
Even its not getting connected to pc cause it restarts continuously and in this situation how can I know which model it is and how can I flash new version.
All this happened after Marshmallow update.
Please come up with some solution else this is just a paper weight.
I have the same issue, after Marshmellow update my Priv keep restarting and continuous doing that until the batTrey drain. The phone also heats up and can't find a solution. Tried all kind of reboots but nothing works.
Hoping for a solution before the phone dies completely.
Same issue since 2 days ago
Hello,
I also have the same issue with the PRIV. I spoke with BB Support. They told they will contact me by after 24 hours. I don't know if there won't be any valid warranty since it is an unlocked phone.
Have you find any solution for this?
Please someone help!!
this is because of a wrong flash, you need to use the autoloader appropiate for your unit, with device in fastboot mode run the autoloader, if you do not know your version download all available and flash them, if it is not valid for your unit it wont flash or it wont work, if you swap files to try to bypass and install mm on ll device like att it wont work neither, i have tested this and it works no matter if you swapped files from other autoloaders or not as long you use the correct one your device will be back to life
Same error here...
But if I try to enter fastboot mode (vol-), it reboots after 2-3 seconds...tried also 32 seconds of power on button....any idea?
Thank you,
Chuck26
nicromant said:
this is because of a wrong flash, you need to use the autoloader appropiate for your unit, with device in fastboot mode run the autoloader, if you do not know your version download all available and flash them, if it is not valid for your unit it wont flash or it wont work, if you swap files to try to bypass and install mm on ll device like att it wont work neither, i have tested this and it works no matter if you swapped files from other autoloaders or not as long you use the correct one your device will be back to life
Click to expand...
Click to collapse
Thanks for the tip,
I tried to flash it with one autoloader days ago. It just didn't succeed. The screen went black with unceasing blinking green light.
I kept the contact wit BB Support. They just washed their hands. They told me to go to the Rogers Store where I just bought the PRIV to ask them for a replacement. This is kind of impossible, since I live in Mexico and when the device was bought was on a trip to Vancouver. Yesterday I just plugged in my laptop the phone with the autoloader running hoping something happens. So I left it at home for several hours. When I came back, it was just as before, restarting over and over and over until fastboot menu. So I just gave another try to the autoloader, but it just happened again. Now it remains in black screen and with the green led light blinking. I tried several button combinations over and over just to get to the fastboot menu with no success.
I can't make it to bring up the loading screen and neither fastboot menu.
I guess it was because picking a wrong autoloader for flashing the PRIV. I downloaded another autoloader for trying.
Please help with this.
My PRIV is the STV100-3.
The first autoloader I tried is the Rogers Canada or Orange Slovakia – STV100-3 & STV100-4 - AAF057 Software Version
The second I want to try is the BlackBerry common SW for generic STV100-1, STV100-3 & STV100-4 devices - AAF518 Software Version
This is the link where I got them:
http ://ca.blackberry.com/content/blackberry-com/en_ca/support/smartphones/blackberry-PRIV/reload.html
Thanks in advance!!
nicromant said:
this is because of a wrong flash, you need to use the autoloader appropiate for your unit, with device in fastboot mode run the autoloader, if you do not know your version download all available and flash them, if it is not valid for your unit it wont flash or it wont work, if you swap files to try to bypass and install mm on ll device like att it wont work neither, i have tested this and it works no matter if you swapped files from other autoloaders or not as long you use the correct one your device will be back to life
Click to expand...
Click to collapse
Thanks for the tip,
I tried to flash it with one autoloader days ago. It just didn't succeed. The screen went black with unceasing blinking green light.
I kept the contact wit BB Support. They just washed their hands. They told me to go to the Rogers Store where I just bought the PRIV to ask them for a replacement. This is kind of impossible, since I live in Mexico and when the device was bought was on a trip to Vancouver. Yesterday I just plugged in my laptop the phone with the autoloader running hoping something happens. So I left it at home for several hours. When I came back, it was just as before, restarting over and over and over until fastboot menu. So I just gave another try to the autoloader, but it just happened again. Now it remains in black screen and with the green led light blinking. I tried several button combinations over and over just to get to the fastboot menu with no success.
I can't make it to bring up the loading screen and neither fastboot menu.
I guess it was because picking a wrong autoloader for flashing the PRIV. I downloade n¿another autoloader for trying.
Please help with this.
My PRIV is the STV100-3.
The first autoloader I tried is the Rogers Canada or Orange Slovakia – STV100-3 & STV100-4 - AAF057 Software Version
The second I want to try is the BlackBerry common SW for generic STV100-1, STV100-3 & STV100-4 devices - AAF518 Software Version
This is the link where I got them:
http ://ca.blackberry.com/content/blackberry-com/en_ca/support/smartphones/blackberry-PRIV/reload.html
Thanks in advance!!
leo_ackzion
if the autoloader solution does not work then you need to force manually the unit into flashboot (google how to force fastboot)
then try to flash each content from the img into the device manually same as the nexus devices
the autoloader should be able to recover your device
this is the reload instruction website
http://support.blackberry.com/kb/articleDetail?articleNumber=000038083
this is where the autoloaders reside
http://ca.blackberry.com/content/bl...pport/smartphones/blackberry-PRIV/reload.html
make sure your device is physically an STV100-3 or 4 it is basic to have the proper version
nicromant said:
leo_ackzion
if the autoloader solution does not work then you need to force manually the unit into flashboot (google how to force fastboot)
then try to flash each content from the img into the device manually same as the nexus devices
the autoloader should be able to recover your device
this is the reload instruction website
http://support.blackberry.com/kb/articleDetail?articleNumber=000038083
this is where the autoloaders reside
http://ca.blackberry.com/content/bl...pport/smartphones/blackberry-PRIV/reload.html
make sure your device is physically an STV100-3 or 4 it is basic to have the proper version
Click to expand...
Click to collapse
Hi nicromant.
After several hours I wrote my last comment, the phone showed the fastboot mode, restarting over and over without showing the BB Logo, but only the fastboot menu, constantly rebooting.
Next, I tried to reload the OS via autoloader again. But then my phone again was in black screen with green and white blinking light.
Then I tried to manually force it into fastboot with the Android SDK Tools, but nothing happens.
When I introduce "adb devices" command, it won't show any connected device in the PC.
So I don't know what else I can do.
Please help!
Thanks in advance.
I just had this problem. Took it to the tmobile store i bought it from and they told me it was fried hardware. The phone keeps trying to reboot and fix itself but obviously it can't happen. Their solution? Get a new phone. I had a 2 year warranty and apparently the priv has been having so many problems that the store was offering a trade up deal to a samsung. Hopefully a store near you is doing the same, because thats probably your only option at this point if it's the same problem as mine.
leo_ackzion said:
Hi nicromant.
After several hours I wrote my last comment, the phone showed the fastboot mode, restarting over and over without showing the BB Logo, but only the fastboot menu, constantly rebooting.
Next, I tried to reload the OS via autoloader again. But then my phone again was in black screen with green and white blinking light.
Then I tried to manually force it into fastboot with the Android SDK Tools, but nothing happens.
When I introduce "adb devices" command, it won't show any connected device in the PC.
So I don't know what else I can do.
Please help!
Thanks in advance.
Click to expand...
Click to collapse
Try to install the appropiate ADB and fastboot drivers it is why your pc is unable to see the device, check on device manager if you have it setup properly, unfortunately i do not have a priv anymore (i change devices every 1 or 2 month)
I have same problem with my Priv from AT&T (100-1). It failed to boot after autoloader. it does not turn on. Just LED flashes: White one flash, then Green 3 flashes. and again. I can not force it into fastboot menu anymore holding Power plus Vol down or any other combination.
Need help! Thanks
after updating with this loader
https://bbapps.download.blackberry.com/Priv/bbry_qc8992_autoloader_user-common-AAG191.zip
i also cant boot the phone it just show me 4 options on screen but keep on coming back to it no matter what i select
Hold power & vol down both for 32 seconds for a real HARD reboot...
Charkatak said:
Hi,
If you don't know the model #, then don't flash...
I read that Hard Reset of the device is needed, by pressing and holding the volume up and down keys simultaneously for at least 10 seconds, when you reach the error screen
Click to expand...
Click to collapse
I had the same issue quite suddently with no warning. Phone just shut itself off (in a manner similar to what happens when you long press the powre button) Spent hours wondering what to do. Finally Thought the power button was stuck. I slipped a long finger nail into the gap where the power button contacts the phone electronics (dont know how to be clearer than this) to try and separate the power button and whatever it touches when you press it. After a couple of tries, The phone started up successfully. It appears to be a design issue
I FIXED IT!
Same issue as described, bootloop after 10 seconds.
I used electrical tape under and over the flat cable of the power button, also covered the "inner" power button with this.
Now it works for already 1,5 hours and is loading updates.
Also posted this as nes3Ah in crackberry forums, but it has to be released by a mod.
Good luck!
Hello all, i am planing to describe all good and not working things about this Nougat version i found and also process i did to install it.
I would be grateful if someone can help me resolve not working things or maybe this will help developers fix them.
First, one month ago, i unlocked and rooted my phone because i wanted some additional features. TWRP was installed and worked like it should. I did not unroot phone.
Yesterday, i downloaded those 2 files needed for Nougat 336 update. I used DLOAD method.
Steps i did was:
1. Put BOTH files on SD car in dload folder.
2. Power off phone.
3. Enter TWRP via Power + Volume down button.
4. Flashed 1st (Update.zip) file and got some red line errors. (Because i read it is normal i went further).
5.Flashed 2nd file WITHOUT reboot. All was done in 1 or 2 mins, and no loading and installing screen was shown, just rebooted normally.
6. Huawei logo showed and phone start normally with nougat update (1. December security patch).
Good things i noticed while few hours of testing:
1. Better battery life
2. Twin apps working
3. App drawer working
4. System is a bit faster (apps load and work faster)
5. Less ram is used (900-1000 MB free when cleaned)
THING THAT DON'T WORK AND I NEED HELP TO GET THEM TO WORK:
1. Camera app show black screen, than shut down and restart itself. That happens all the time until i close it with square button and click on trash can. SO CAMERA NOT WORKING. I even tried some apps from app store. App works but screen is full black.
2. I have no Huawei stock apps like clock, alarm, stopwatch, calendar, calculator, file manager, not even stock sound for ringing nor message etc. They are MISSING FROM PHONE apparently.
3. Problem with sound manage. Those bars that regulate sound dont work very well. I put my Ringtone bar to MAX and i hear phone ringing and SMS sound but I dont hear app sound like Viber or Messenger sound.
4. "MOST IMPORTANT ONE": I thought maybe 2nd file did not install normally so i tried to enter TWRP again and flash it again, but I CANT ENTER TWRP!
I pressed Power+ Volume down like 10 times, I tried Power - Volume up too, even all 3 buttons, nothing happens. Just Huawei screen and phone boot up normally. When i did 3 buttons EMUI screen appeared and it said, installing updates, went to 5% and wrote: FAILED, Reboot phone.
So now i cant flash ANYTHING again. Can someone help me with this thing please. Maybe many other people will find this thread helpful.
Thank you.
Hello
I think best and remake to own.
It seems to me that the
MM recovery solution, is written at the bottom of this post. Http://forum.xda-developers.com/hua...t/android-7-emui-5-0-vns-l31-l21-l23-t3513816.
To install nougat b336, maybe you should follow the original post also that is also written down this post.
your bootloader is locked
did you face nfc and bleutooth not working in that case what may i do to fix the problem and thanks in advance
I have the S7 Edge originally the ATT version but I rooted and flashed the unlocked version firmware. I was trying to unroot the device and restore everything to the factory settings since I am using the trade in program through Samsung and have to send it back in stock. I tried to flash it using Zodin, the Mac version of Odin, but was unable to get it to work because I was not able to get the proper pit file, it always returned with the error that there is a corrupt file. Since I do not have Windows, I could not Flash the firmware using Odin. Out of desperation, I looked online and a website (the article was on Android forums with the title restore stock with flashfire no PC) said that I could use the Android app Flashfire to flash a firmware and return to the factory unrooted settings. I downloaded and inputted the full firmware file for the original AT&T firmware version and checked the boxes to wipe boot, system, internal data, and trusted Zone and also maintain everroot. It seemed to work and was processing with the fast scrolling command text on the black screen but after a few minutes it said there was an error at the very bottom of the screen. Eventually, it restarted but nothing has come up and the screen is black without any light from the LED indicator. I tried to restart it with the power button several times, holding down the power button and the volume down, holding down the home button and the power button, and holding down the power button, volume down, and home button. I left the phone unplugged overnight and plugged it in this morning to see if it would turn on but nothing happens. Any help would be greatly appreciated and I am hoping that I did not brick the phone.
Since Im not sure now if you also tryed to go in download mode again but ussualy you are always able to do that.
If not try to remove battery and put it back in after 10 minuts. And connect it to your laptop and let it charge for a few minuts. Next Hold buttons for dowload mode. Hold em for 5 secconds. Even if still have a blackscreen open samsung kies or switch. One of them has the emergency recovery option. It will detect it then and will say something like you need to repair the software want to continue etc. Lwt it do its thing and make sure you are on the internet. You drink some coffee and give it 30 minuts atleast.
Still not work? Try to put in a spare battery or charge it with another phone. If that not even works. I cant help you.
First of all, I do not have a battery that I can remove. I tried to enter download mode and recovery mode but nothing worked. It will not boot up into any mode.
Just hold the button combination for download mode for 10sec and connect it to a PC with installed smart switch on it. Smart switch should detect your phone, even if the display of the phone stays black.
I tried what you recommended but nothing works still.
I seem to have encountered the same problem, albeit not through exactly the same method. Essentially I managed a full stock firmware flash through ODIN, all the right messages came up and I got a pass from Odin. The phone rebooted and brought up the blue "updating" screen, which very quickly changed to a "removing" screen, at which point the phone froze. When I tried to reboot, the screen went black and now.... nothing. No recovery, no download, no light to indicate that its charging... nothing. My computer doesn't register there is even a device attached.
I've done heaps of flashing and never seen anything like this!
Would greatly appreciate any advice or assistance!
same issue here accept i was just using odin like usual. anyone figure this out yet? the phone was not rooted or anything. i had flashed the g935u firmware and then decided to put it back to stock g935t firmware. then it started doing this.
reflash but this time it check nand erase all
NEVVER EVER CHECK NAND ERASE ALL, dont advise others what you don't know yourself. This is for manufacturer and is not intended for repairing, if you nand erase your phone its just a paper weight then, beyond recoverable. But this issue is caused by wrong partitioning i suppose, but still it must go in download mode, try plugging it in when smartswitch is open in pc while holding home+vol down+power , if it wont detect then i suppose its nand failure due to any reason. And motherboard replacement is required.
Sent from my S7 Edge using XDA Labs
I recommended it because I had the same experience of the black screen and blue led that lights up and I flashed more than 50 times without any result and the solution that was given to me and which walked it's this one
stootie said:
I recommended it because I had the same experience of the black screen and blue led that lights up and I flashed more than 50 times without any result and the solution that was given to me and which walked it's this one
Click to expand...
Click to collapse
If it really did nand erased all, your phone wouldn't even boot, your phone working is a proof it isn't nand erased. What people don't understand is that nand isn't the internal memory, its the non volatile memory holding vital info about functioning of phone just like a bios of computer, so if it is erased you are beyond recoverable damage. Here , i must say i dont know if odin can really nand erase all, because if your phone is working, nand is definitely not erased. And as far as what fixed your issues, there must have been some other reason. But for everyone, leave that option empty just to be safe.
Sent from my S7 Edge using XDA Labs
I was trying to install 935U firmware in my 935V US verizon s7 edge. After installation completed using odin phone rebooted and showed new sim setting something.... after that it went off and now its turning up.
Any help please?
did you find any solution?...plzzz help me i also got the same problem
HEY BRO...FIRST OF ALL , WHOEVER SAID THAT NAND ERASE OPTION AFFECTS PHONE... IM HERE FOR ANSWER. IHAVE FLASHED AND EVERYTIME used nanderase ...my phone feels brand new ..it jst repartitions the size of nand... also adding pit doesnt effect ...your problem is something other ... plug your phone to a good charger whole night.make sure charger is working...then try volume down and home and power into download mode..gudluck
zaighumjawad said:
HEY BRO...FIRST OF ALL , WHOEVER SAID THAT NAND ERASE OPTION AFFECTS PHONE... IM HERE FOR ANSWER. IHAVE FLASHED AND EVERYTIME used nanderase ...my phone feels brand new ..it jst repartitions the size of nand... also adding pit doesnt effect ...your problem is something other ... plug your phone to a good charger whole night.make sure charger is working...then try volume down and home and power into download mode..gudluck
Click to expand...
Click to collapse
Ofcourse it doesn't effect S7 edge, because it DOESNOT wipes the nand.. so its not working simply..
On older phones it will wipe nand totally and thats a dead brick..
First search what nand is.. its the non volatile memory.. or simply nand chip .. if you delete it.. your phone won't be a phone anymore.. its the non volatile memory that is equal to a bios of a computer.. delete non volatile memory and your phone is completely dead..
Thanks to the latest phones that don't erase non volatile memory and instead selecting nand erase with s7 edge simply deletes userdata before flashing.. which is equal to a normal hard reset ..
Sent from my S7 Edge using XDA Labs
Hi! It's my first time making a thread here so guidance is greatly appreciated. Here's how everything started:
I was just casually using my phone (at the time I was using the built-in browser of google assistant, just looking at some news) then suddenly my phone crashed (I've experienced this before every time I was using the google assistant built-in browser, a simple browser can crash this phone?). It just restarted like it normally would, then, after using the phone for a few minutes, it froze again! I waited for it to reboot but now it just powered off and won't turn on (it won't show any sign of life, no logo, not even an icon when I tried to charge). D:
I figured to have it checked by a local technician and when he tried to plug a charger in, a display showed it charged (found it weird but happy at that time). I figured it was the charger so I bought a new one.
So I got home to charge it fully and when I turned it on, it worked normally. However, when I tried to turn my wifi on, notifications popped up and suddenly it froze again! After that, it turned off and when I tried to turn it back on, I got this dreaded red texts on a black screen:
Bootloader exception ( RST_STAT = 0x10000)
Exception: do_handler_sync: DABT_EL1(esr: 0x9600010)
RDX, do not reboot*** ext4_wait_block_bitmap:494: Cannot read block bitpc : 0x8f0261d0 lr : 0x8f02618c sp : 0x8f117fd0
This showed and the phone won't even let me turn it off, so I just waited for the battery to die out. When it did, I tried to charge it again and planned to do a factory reset thinking maybe an app was causing this. I managed to go to the no command icon and manual mode but no factory reset menu showed up (where you navigate using the volume up and down). So I tried to restart but now it died out completely- no button combination would work, it won't charge, no display can be seen. Is it hard bricked?
I tried to wait a whole day thinking I would be able to charge it again, but it has already been three days and I am not able to perform anything.
There it is, I tried to be as detailed as possible. Additional info: I never tried rooting it or flash roms with it, I haven't done anything with the software (or hardware since I am careful) but install apps (officially from the playstore). From how I see it, it's a firmware problem and I was hoping someone here can help me bring my phone back to life. Is this my fault? If I have this repaired, am I the one who should pay for this?
I mainly want to know what the error message means and if there is a way for me to access the phone. (I figured if I have the technician fix this, all they need is a computer with a software that could fix this since it's a problem with the firmware. If that's everything they would do then I could do that too, with your help of course.)
Thanks to all in advance!
Hi. This sounds pretty strange. Technically...it is hard bricked but you can bring it to life. I can tell you what I would do, when I run into such a problem.
ATTENTION: YOU WILL LOOSE ALL OF YOUR DATA EXPECT EXTERNAL SD CARD
First download the newest firmware for your S7 Edge (G-935FD) on SamMobile and unpacking the .zip.
Download Odin in the newest version, open it and put the downloaded files in the right order in Odin (BL, AP, CP and CSC - the files from the firmware from SamMobile has labeling with BL, AP etc.)
Now the tricky part because your phone won't charge and doesn't go on. You have to go in the download mode with your phone (press and hold volume down - home button - power button) than an window appears and press volume up
Connect your phone with your PC (in Odin you can see, that your device is connected) and press start. It will take some time transferring the ROM and your phone will reboot automatically and after some minutes of blinking Samsung logo...the phone should start normally into the SIM card pattern screen.
Now you have a fresh stock ROM installed and everything should work fine again.
But your phone won't get on or will charge...maybe when you connect it to your PC it will charge. Otherwise I see no option to solve your problem. Your phone must charge again that you can go into the download mode and bring your S7 Edge back to life with a clean stock firmware and an working system.