TS7 | Android 11| Internal mic volume is too low - Android Head-Units

Hi guys
I have TS7 Topway head unit running Android 11 with latest updates. I'm struggling to raise the internal mic volume as it is barely audible on phone calls. I followed few youtube videos and managed to open up "Engineer Mode", however, my unit doesn't have Audio test under Hardware testing. Should I check any other places for it?
Thanks

rajthampi said:
Hi guys
I have TS7 Topway head unit running Android 11 with latest updates. I'm struggling to raise the internal mic volume as it is barely audible on phone calls. I followed few youtube videos and managed to open up "Engineer Mode", however, my unit doesn't have Audio test under Hardware testing. Should I check any other places for it?
Thanks
Click to expand...
Click to collapse
you can try this, Factory password: 123456

Hello @aRaychan Thank you very much for the video. Well, my factory opens up a normal android window that doesn't have channel setup. It looks like we are using two different versions/skins?
Attaching couple of images for your references.

I'm Suffering with the same issue
Anyone got a solution?

Up

I’m having a similar issue but it appears to only be low while using CarPlay via the Zlink app. Are you using the phone with just BT or an app?

Related

New Android 7.1.1 PX3 Unit from BonRoad - Any Info or Feedback?

https://www.aliexpress.com/store/pr...32699671881.html?spm=2114.12010612.0.0.KbDCzA
The UI and other specs are very similar to the HotAudio test preview (thread here). Has anyone had a chance to get their hands on one of these yet? I'm deciding between this or a Joying unit.
Any input is appreciated!
PX3 RK3188 Android 7.1.1 DVD VW GPS 2G ram
Just received and installed this Head unit in my vw touran 2004.
It looks like the specifications are the same : https://fr.aliexpress.com/item/Pure...32582906631.html?spm=2114.13010608.0.0.UFTkAD
The unit is a Bonroad C1120801A4/A5 (RK3188 Android 7.1.1 Lecteur DVD de Voiture pour Octavia Fabia Praktik EOS GPS Navigation Avec 1024*600 HD 8 "
So far, i'm satisfied with the unit :
- Radio is now working and stable .RDS works fine (with the last DCMU update). (You need to put a double fakkra antenna plug to get the radio stable on vw cars)
- GPS IGo is fine but not in French, Waze great
- canbus is functional
- Wifi rear camera ok
- BT external micro (mono) installed, i need to shout/YELL (it is an issue...)
When calling, both mic works (front mic and ext. roof mic)
google voice research unusable
I'm waiting for documentation from the supplier as there were no instructions in the box.
Do not hesitate, if you need more informations, pictures and tests. :good:
I tried Kingo root but it failed.
I also bought a car radio on aliexpress similar to yours. Px3 cortex a9 for ford focus c-max.
I have exactly the same worries as you with the microphone, the one integrated in the facade I have to stick my mouth on and scream.
The one who plugs externally is the same thing.
Many people talk about a worry with frequencies that are not the same in china and here
300-3400 for china
50-7400 for others
If you can root your device you can change the frequencies with Pimp my rom.
Personally I can not root it.
Thanks for the feedback. What's the boot time on this thing? Does it have a sleep function similar to Joying units?
wankun said:
Thanks for the feedback. What's the boot time on this thing? Does it have a sleep function similar to Joying units?
Click to expand...
Click to collapse
About 15 to 20 seconds to boot. For sleep functions, I have nightlight or 15s 30s 1mns ect ...
I've the same unit but it doesn't detect OBDII adapter. Any solution?
After trying everything to get the microphone that works for the handsfree kit, I decided to cut the 4th leg of the bluetooth module and solder a mono microphone directly on it. This was my last option because I did not have the c32 connector. This has been a success. People hear me very well now.
I have ordered this one - https://www.aliexpress.com/item/4-C...32691433062.html?spm=a2g0s.9042311.0.0.MbBrvn. Waiting for the the item to arrive. The seller would ship it on 17 July 2017 (Monday).
---------- Post added at 07:14 PM ---------- Previous post was at 07:08 PM ----------
stanley 00 said:
I tried Kingo root but it failed.
Click to expand...
Click to collapse
Can you try the following and see if this gives you root access:
Goto factory settings and instead of typing 126 type *#hct#root#
This may give you temporary root access. Now you can install supersu or magisk to make the root permanent.
Note: I don't have this device or have not used any other Android HU; so I have not tried the steps mentioned above. I found this on the internet. Please try and let us know the result.
Cheers,
Rahul U S
Is your Bluetooth scanning OBDII with this ROM ?
S.Rahus
i tried your password to root but it does not work
" Goto factory settings and instead of typing 126 type *#hct#root# "
Stan
Anyone managed to fix the bad Bluetooth call quality? Any luck with getting root access?
Cheers,
Rahul U S
Hello, I bought this unit, but the 9-inch model without buttons and I do not use the search for voice, the free hands works perfectly for me, but for voice searches they do not work with the internal or external microphone.
Nor can I get programs with self-starting like the Radardroid service start only with the start of the radio, I have to manually activate it at each radio start.
I also have no rear camera, only parking sensors, and every time I put the reverse gear turns off the screen and the voice of the radio to try to connect to the back camera even if I do not have it, this did not happen with my previous radio with android 4.4, only with this new one with android 7.1.2.
Forsaken2703 said:
Hello, I bought this unit, but the 9-inch model without buttons and I do not use the search for voice, the free hands works perfectly for me, but for voice searches they do not work with the internal or external microphone.
Nor can I get programs with self-starting like the Radardroid service start only with the start of the radio, I have to manually activate it at each radio start.
I also have no rear camera, only parking sensors, and every time I put the reverse gear turns off the screen and the voice of the radio to try to connect to the back camera even if I do not have it, this did not happen with my previous radio with android 4.4, only with this new one with android 7.1.2.
Click to expand...
Click to collapse
(1) In the "Shutdown delay when ACC is off" do you have a new option named "Auto Sleep"?
(2) What is the MCU version you have?
Thanks in advance!
Cheers,
Rahul U S
s.rahus said:
(1) In the "Shutdown delay when ACC is off" do you have a new option named "Auto Sleep"?
(2) What is the MCU version you have?
Click to expand...
Click to collapse
Hello, I can not find the "Autosleep" option. My MCU is MTCD_XRC_V2.44_1
corolla E12 2din model
I have problems with the sound by hands free, to my listen very low, my unit is the MTCD_XRC_V2.54a_1 with android 7.1.2 ... is there any possibility to get down to version 5 of android?
Forsaken2703 said:
Hello, I can not find the "Autosleep" option. My MCU is MTCD_XRC_V2.44_1
Click to expand...
Click to collapse
are you 100% sure it's not there, first one from top?
i also have an XRC unit with 7.1.1 and MCU 2.44_1 and option is there...and working good.
[email protected] said:
Is your Bluetooth scanning OBDII with this ROM ?
Click to expand...
Click to collapse
zerozoneice said:
are you 100% sure it's not there, first one from top?
i also have an XRC unit with 7.1.1 and MCU 2.44_1 and option is there...and working good.
Click to expand...
Click to collapse
Try the latest XRC version 2.54. Please find the attachment.
zerozoneice said:
are you 100% sure it's not there, first one from top?
i also have an XRC unit with 7.1.1 and MCU 2.44_1 and option is there...and working good.
Click to expand...
Click to collapse
Well you're right, if I have the auto sleep option enabled, but programs like Radardroid can not start automatically with the radio, I always have to start them manually.
Hi everyone!
I have a similar unit.
I think that the problem is with android version. In our case 7.1.1.
I had a problem with my OBDII reader and I updated my unit to 7.1.2 and fix it
Now with 7.1.2 I have the same problem with microphone and also I have a problem with USB cameras. Only the DVR app can connect with but only the first time. If I close the DVR app and open it again, camera dont work.
I want to use the USB front camera with Mapillary and iOnRoad but I cant.
Any idea?
Where can I donwload a previos android version? for example 5.1.1 or 6 perhaps its would fix the problems.
Thanks!
I've had a Hizpo 7" no dvd with buttons mcu xrc 2.54 android 7.1.2 2gb 16gb for a week. Came this way so I can't say about previous versions.
My bluetooth microphones (both) work fine for me, calls hear me fine. Even just the internal mic seems good.
I haven't had any bluetooth connection problems.
Android does not see any microphone, there is no speech input in keyboard settings, google voice search hears nothing. Voice recorder apps hear nothing.
Tried a usb mic but that did nothing.
Can't get usb camera to work for DVR. RCA CVI cam works in DVR but doesn't record, does not work in FCAM app however, though rear does.
OBDII worked fine when I first tried it, haven't messed with it since.
Display clear and good.
Haven't seen any bog, even when running nav, audio, video etc.
Audio is so so, lots of noise. Radio reception seems great and RDS works too. Needs an amp.
Wifi reception is great, just a little antenna on the back.
I really like it but for the lack of voice search. It's really fast, I have a load of apps and still tons of space. Runs everything so far.
Nearly instant on, radio is playing in under 2 sec (probably 1).
GPS works good so far, finds my location in maybe 10 sec or less usually. I haven't been thru Pittsburgh yet to say how well it keep its signal.
I just got MTCtools and dialer and will start messing with them tomorrow, hopefully I can get a mic input to android and get voice working, then this will be really great!

Ts9 sp9853i_1h10_vmm

Hi guys How are you today! I will love to know whats post or support they have for this head unit android 8.1.0 no bottons 10” screen sp9853i_1h10_vmm 4gb ram
system version v11.1.1_20190615.180645_TW8-X
MCU version ts9.4.3-97-225-A46181-191118
Processor type octa-sp9853i
Im try ro find some support for like able to root or update to android 9.0 any suggestions
Have the same unit as yours. Not sure this post related or not
h tt ps ://forum.xda-developers.com/android-auto/android-head-units/firmware-fur-ullgo-head-unit-sp9853i-t4066893
tsxmichael said:
Hi guys How are you today! I will love to know whats post or support they have for this head unit android 8.1.0 no bottons 10” screen sp9853i_1h10_vmm 4gb ram
system version v11.1.1_20190615.180645_TW8-X
MCU version ts9.4.3-97-225-A46181-191118
Processor type octa-sp9853i
Im try ro find some support for like able to root or update to android 9.0 any suggestions
Click to expand...
Click to collapse
Hello
It is DSP version?
Can you check the loudness control and green rca sub out plug, the sub gain works or not?
vegfokic said:
Hello
It is DSP version?
Can you check the loudness control and green rca sub out plug, the sub gain works or not?
Click to expand...
Click to collapse
I also have problems with loudness and sub (sub gain not working). Seller "forgot" to send me extra "sub RCA" harness for that. I hope it works. I guess the software is ok.
hey guys, if anyones head unit came with the Carda Fiber DSP Tuning app, I would really appreciate it of you could share the app with me, I deleted it and now the volume doesnt work. Ot is pretty easy to share an app, just let me know if you guys have it. thank you
hi all!! I bought this ts9 unit
https://www.aliexpress.com/item/32G...966.html?spm=a2g0s.9042311.0.0.d68f4c4dB4UNTD (ts4g version)
Can we root it and tune????
I just brought ts9-sp9853i , its really fats but Im having problem connecting to android auto and even simple mirror link won't work or something I'm doing wrong. I tried headunit reloaded but it only shows blank screen. Anyone can tell how to connect your phone for android auto please let me know. My phone is Note 8 by the way.
Sent from my SM-N950W using Tapatalk
Hi. I just bought the same headunit and have issues with it. Initially when plugged in there was sound when i played the radio/bt music/ music however i was trying to get the steering wheel control working and changed the MCU (through extra setting--> model choose). From this moment on, the sound stops working. Is there a way to reset the MCU or any other method to get sound playing again? i have tried factory reset, reset, turning on and off etc etc. I drive a 2013 Honda Civic Hatchback. Any ideas would be greatly appreciated.
Thank you in advance~
mike933333 said:
hey guys, if anyones head unit came with the Carda Fiber DSP Tuning app, I would really appreciate it of you could share the app with me, I deleted it and now the volume doesnt work. Ot is pretty easy to share an app, just let me know if you guys have it. thank you
Click to expand...
Click to collapse
Hi, you have it already? I've deleted it also (factory reset). Can you share me this app?
Hi,
I have also same model octa sp9853 installed in my Toyota Corolla 2010 hybrid. Yesterday i was playing music through bluetooth and i tried changing volumes from my steering controls. The music stopped playing and can't hear any sound. In my phone music is still playing over Bluetooth but no sound in cars speaker and my phone. Please help me fix it. Thank You.
Hello. I am having isues with rooting device or removing some apps. No of the solutions are working for me. Pc is not detecting, system update from this site is not working. Any more solutions?
Thanks
@Csurgi
Hello! Did you get the app ?? I also deleted the "Carda Fiber DSP tuning" application. (factory reset) If so, please let me know.
[QUOTE = "Csurgi, post: 83784183, tag: 11166871"]
Szia, már megvan? Én is töröltem (gyári visszaállítás). Megoszthatja ezt az alkalmazást?
[/IDÉZET]
Helló ! Megkapta az alkalmazást ?? A "Carda Fiber DSP tuning" alkalmazást én is töröltem. (gyári beállítások visszaállítása) Ha igen, kérjük, ossza meg velem.
Hello. would have a little problem with the solution. you have no idea how to fix it?
Szia. lenne egy kis problémája a megoldással. fogalmad sincs, hogyan lehetne kijavítani?
.
Hi everybody! There is any way to access recovery mode for this unit?
Tried the method with terminal but it stuck with the Android logo and " no command" text. Didnt had time to try other physically methods.
Bot3k said:
Hello. would have a little problem with the solution. you have no idea how to fix it?
Szia. lenne egy kis problémája a megoldással. fogalmad sincs, hogyan lehetne kijavítani?
Click to expand...
Click to collapse
You resolve issue?
Do you have that part of sp9853i for me
Does anyone know how to reboot (not switch off display and on) the head unit?
witam wszystkich potrzebuję oprogramowania do sp9853i_1h10_vmm android 9.0 bardzo proszę
Hello everyone!
Could anyone find the Carda DSP app? I also deleted it with factory reset. I would be grateful if someone could share it with me or point me in the right direction. If someone has it installed, an installer apk can be created very easily.
The only problem is that the volume is too low. (most likely because the Carda app is missing). I can also imagine that some other app would get the job done, but I could not find any.
Thanks in advance!
Best Regards
Rafi

Android Head Unit eq ignored

hello everyone ! i am writing here hoping to find some help. recently i bought an Android Head Unit with 8227L, 2gb of ram and 16 storage. The "issue" is that there is an equalizer option in car settings in the "Sound Settings" menu but it is used only when listening to music by bluetooth, usb storage or on youtube. When trying to use spotify or youtube music, the sound is flat, it lacks bass. It's like it's ignoring the eq. I tried different versions of spotify in hope that it will have a built in eq. I looked in android setting in audio at audio enhancements but nothing is there. I will attach some pictures of the unit with different information that might be useful. Thank you in advance !
altaier91 said:
hello everyone ! i am writing here hoping to find some help. recently i bought an Android Head Unit with 8227L, 2gb of ram and 16 storage. The "issue" is that there is an equalizer option in car settings in the "Sound Settings" menu but it is used only when listening to music by bluetooth, usb storage or on youtube. When trying to use spotify or youtube music, the sound is flat, it lacks bass. It's like it's ignoring the eq. I tried different versions of spotify in hope that it will have a built in eq. I looked in android setting in audio at audio enhancements but nothing is there. I will attach some pictures of the unit with different information that might be useful. Thank you in advance !
Click to expand...
Click to collapse
Sorry to hear about your issues. Luckily, there is a solution and not just to this problem. Check out this guide:
[GUIDE] YT9216BJ !SUPERMOD! - ROOT, Viper4Android, TWRP, Custom UI, brick recovery and more​
It does not look like the original rom. It says "OS: ANDROID 10.1" and build number is simply "ANDROID_TRUNK-p0" which I have never heard of.
iceblue1980 said:
Sorry to hear about your issues. Luckily, there is a solution and not just to this problem. Check out this guide:
[GUIDE] YT9216BJ !SUPERMOD! - ROOT, Viper4Android, TWRP, Custom UI, brick recovery and more​
Click to expand...
Click to collapse
was reading this post a little... not quite sure how to make a backup... i saw some videos where someone opened the head unit and soldered some wires on some testpoints for the usb connection. do i need to do that also ?
Bob_Sanders said:
It does not look like the original rom. It says "OS: ANDROID 10.1" and build number is simply "ANDROID_TRUNK-p0" which I have never heard of.
Click to expand...
Click to collapse
yeah... best part is i was trying to read the android version using aida installed on the head unit and the app simply crashes.
altaier91 said:
was reading this post a little... not quite sure how to make a backup... i saw some videos where someone opened the head unit and soldered some wires on some testpoints for the usb connection. do i need to do that also ?
Click to expand...
Click to collapse
There are step-by-step instructions included into the guide. With links.
iceblue1980 said:
There are step-by-step instructions included into the guide. With links.
Click to expand...
Click to collapse
there is only a video that shows how to create the backup but it is for phone, nothing mentioned on how to connect the head unit to the pc, and not reffering to power. do i need to use the test points from brick recovery guide in order to create the backup ?
Edit: i saw something about connecting the usb to the 4 pin port, but do i need to use some sort of male to male usb cable ?
Second Edit: my head unit has physical buttons, i saw that the guide is mostly for units without physicial button. Is it safe ?
altaier91 said:
there is only a video that shows how to create the backup but it is for phone, nothing mentioned on how to connect the head unit to the pc, and not reffering to power. do i need to use the test points from brick recovery guide in order to create the backup ?
Edit: i saw something about connecting the usb to the 4 pin port, but do i need to use some sort of male to male usb cable ?
Second Edit: my head unit has physical buttons, i saw that the guide is mostly for units without physicial button. Is it safe ?
Click to expand...
Click to collapse
If you have physical buttons on your unit (like Volume Control) then it's best to use this guide instead, as you currently have Android 8 API 27 installed, judging by your Kernel version.
The procedure of backing up a Mediatek phone and backing up your head unit is exactly the same. You do not need to use Test Point method if your unit is working.
All you need to do is to follow the guide in the link I gave you, step by step and you will be able to perform a full backup.
Hi. I have got the same. No Equalizer for Radio. There is Equalizer for mp3 player ( App is called Music ), but not for FM radio app.
In Music app, I can change tones like bass and treble, but not balance or fader. I can change balance only on Car settings, but there is no option to change fader ( front and rear speakers ).
Is there any way we can add even simple Equalizer to FM radio App? Or is there another FM radio app with built-in Equalizer?
My radio is Hizpo from Hizpo Europe Store, 2GB RAM, 16GB ROM, 8227L CPU, Android 11 ( may be fake ).
I am trying to ask Hizpo Europe Store about this, but for now I am getting default answers.
vwrafi said:
Hi. I have got the same. No Equalizer for Radio. There is Equalizer for mp3 player ( App is called Music ), but not for FM radio app.
In Music app, I can change tones like bass and treble, but not balance or fader. I can change balance only on Car settings, but there is no option to change fader ( front and rear speakers ).
Is there any way we can add even simple Equalizer to FM radio App? Or is there another FM radio app with built-in Equalizer?
My radio is Hizpo from Hizpo Europe Store, 2GB RAM, 16GB ROM, 8227L CPU, Android 11 ( may be fake ).
I am trying to ask Hizpo Europe Store about this, but for now I am getting default answers.
Click to expand...
Click to collapse
Hizpo is known for very bad quality units, intentionally scaling down the hardware to be able to sell the head unit cheaper.
If you are within warranty, return the product.
The reason for your issues is on the hardware side. You have no audio microchip on the motherboard.

No sound after HU wakes from sleep

I'm a newbie to this site so apols if I have contravened any site rules!
Hoping someone might be able to help. I bought a 12.3inch HU on AliExpress. Its model number is uis8581a2h10_Automotive, which I think is a FYT HU. It's coded specifically for BMW.
After a full boot everything on the HU works fine. But then if I stop the car, for example to grab something from a shop, when I start the car again the head unit starts up instantly but there's no sound despite Zlink5/Spotify appearing to run properly on the screen. The only option to get sound back is to reboot the head unit and wait for Zlink5 to reestablish a connection with my phone (a Galaxy S10). Interestingly though, even when the music fails to play through the speakers, if I press the microphone button, Google Assistant plays sound and can properly make a phone call played through the car's front left speaker.
Also, when I'm getting no sound after the HU wakes, if I switch to the DAB app, I can hear a millisecond of Spotify music before it cuts off, and then the DAB app also fails to play sound - although it too, like Zlink5/Sportify, responds properly onscreen. So the HU seem to be playing music after waking from sleep, but just not routing it to the amp.
Apparently this unit is supposed to output sound via an aux cable which plugs into the BMW stereo's aux port. However, my unit plays music through the speakers on the aux setting whether or not the aux cable is plugged in. Not sure if that's affecting things?
The final issue is that Zlink5 won't work with bluetooth and WLAN/hotspot at the same time. It switches off WLAN while connecting to my phone via Bluetooth. If I then enable WLAN and set up a hot spot, Zlink5 either switches WLAN off and reconnects via Bluetooth, or else it will connect to WLAN, after which music pauses every second or so.
The sellers have sent me an MCU update file, which I have applied, and I have also tried every option in the HU settings for Car Aux Switch Mode. I can't think of anything else to try.
Can anyone advise whether these problems are likely to be software or hardware related? And has anyone any ideas how they might be resolved?
Many thanks!
In regards to not being able to use Wi-Fi and Bluetooth together when you use zlink it uses the wifi to connect to you phone in the background. If you manually turn it back on it will disconnect from your phone. My advice would be to put a SIM card in your unit.
deadeye920 said:
In regards to not being able to use Wi-Fi and Bluetooth together when you use zlink it uses the wifi to connect to you phone in the background. If you manually turn it back on it will disconnect from your phone. My advice would be to put a SIM card in your unit.
Click to expand...
Click to collapse
Thanks Deadeye, that explains that one, and also explains why it eats my phone's battery
Post MCU version and Android system info
marchnz said:
Post MCU version and Android system info
Click to expand...
Click to collapse
Many thanks for getting in touch Marchnz. The MCU is ZLH_BMH220425A_8581. The original version was ZLH_BM_OS_1.37, but the seller has since provided an update to ZLH_BM_OS_1.53 which has fixed the problem.
Not FYT, requested moderator move to (Android head-units) forum
The_Chowder said:
Many thanks for getting in touch Marchnz. The MCU is ZLH_BMH220425A_8581. The original version was ZLH_BM_OS_1.37, but the seller has since provided an update to ZLH_BM_OS_1.53 which has fixed the problem.
Click to expand...
Click to collapse
hello. can you send me 1.53 update? i have 1.48 and the same problem
masivec said:
hello. can you send me 1.53 update? i have 1.48 and the same problem
Click to expand...
Click to collapse
HI there, I've found the update but it's 1.4Gb or so. Can you send me a DM with your email and I'll send it to you via Wetransfer? Obviously its use would be at your own risk, as I'm not sure whether it will work across different manufacturers/companies.
Hi!
Same issue with Sound, also a BMW.
But my MCU is XRC_BML220608A_8581
Other info:
Processor UIS8581
Model: uis8581a2h10_Automotive
Compilation: uis8581a2h10_Automotive-userdebug 10 QP1A.190711.020 19110 test keys
Manufacter / Brand: SPRD
MCU: XRC_BML220608A_8581
CPUZ and Aida show: Android 10 Api 29
I have XRC_BMH221015A_8581 (uis8581a2h10_Automotive 12,3 its for 4gb+128). write if u need

Junsun V1 pro 8/128 - no app sound

Hello everyone,
recently i installed a Junsun Head Unit in my Audi TT MK2 (2012) with the bose system.
I had a xtrons PX5 before that worked like a dream until the touchscreen died.
The JunsunHead Unit works fine, but there is a strange behaviour i can't figure out.
Everything is connected through the quadlock and a canbus adapter from the seller, also there is a aux harness connected. pretty much standard stuff.
My problem:
The integrated radio app has sound. Music via Bluetooth works also just fine.
Every third party app like youtube, spotify, waze, maps, ... has absolutely no sound. nothing.
Googling my problem wasn't really helpful. Connecting the AMP CTRL Wire to ACC oder every other 12V wire to activate the bose amp in the trunk doesn't do anything, still no sound. And yes, the amp is working just fine, when i connect the amp ctrl wire to the powered antenna while using the radio app you can hear the difference in the sound qualitiy because of the amp working, but like i said you also have sound without the connected amp so there should be sound in any other app also, right? I don't want to listen to radio stations all day - i want spotify
In the hidden menues every setting looks just fine, everything works except the sound in app.
So my guess is the firmware, i already contacted the seller but he didn't responded yet.
Is there a newer firmware available? Or do any of you guys have any idea how to fix my problem?
One more thing: how to do a factory reset on this unit? Is there a code or a special way to press the touchbuttons...? Is it the "erase all content" in the factory settings?
Thank you so much in advance!
no idea?
How is audio output connected to your car/amp? SPDIF coaxial?
Android head unit. Some apps no sound. Radio app has sound.
Hi all. I stumbled upon these forum by googling my issue. So far I haven't found any answers to my problems, so hoping for some help from the great people on here. I have recently installed a seicane 10.1 android head unit into my jeep wrangler...
forum.xda-developers.com
TorstenH said:
Android head unit. Some apps no sound. Radio app has sound.
Hi all. I stumbled upon these forum by googling my issue. So far I haven't found any answers to my problems, so hoping for some help from the great people on here. I have recently installed a seicane 10.1 android head unit into my jeep wrangler...
forum.xda-developers.com
Click to expand...
Click to collapse
I've seen this thread. Didn't really help.
Everything is connected through the OEM quadlock (with bose) + the canbus encoder and AUX left/right in the wiring harness.
Spoke to the seller several times now and he has no idea either. He's sending me a new firmware the next few days to test... otherwise i'll send the head unit back. Must be some software issues cause some apps have sound, others don't... doesn't make any sense to me
DennisH89 said:
I've seen this thread. Didn't really help.
Everything is connected through the OEM quadlock (with bose) + the canbus encoder and AUX left/right in the wiring harness.
Spoke to the seller several times now and he has no idea either. He's sending me a new firmware the next few days to test... otherwise i'll send the head unit back. Must be some software issues cause some apps have sound, others don't... doesn't make any sense to me
Click to expand...
Click to collapse
The radio app is only an interface to control the radio hardware. Bluetooth may be the same. So it makes sense.
Hey everyone,
little feedback after updating the Headunit with the newest firmware from junsun:
Everything works now!!
Here's the link to 8667q v23 01082022
https://drive.google.com/file/d/1xV...w?spm=a2g0s.imconversation.0.0.53de3e5frmrEed
DennisH89 said:
Hey everyone,
little feedback after updating the Headunit with the newest firmware from junsun:
Everything works now!!
Here's the link to 8667q v23 01082022
https://drive.google.com/file/d/1xV...w?spm=a2g0s.imconversation.0.0.53de3e5frmrEed
Click to expand...
Click to collapse
Happy to hear that it wasn't hardware related.

Categories

Resources