Hello! So recently i found my old bootlooping s5 neo g903f and decided to install the stock rom to it via odin. While flashing the procedure failed and the phone fell off the cable, now it shows no signs of life (no sounds,vibrations,no logo) nothing. Can somebody tell me how i can unbrick the phone without a usb jig or jtag?
Marceebebrt said:
Hello! So recently i found my old bootlooping s5 neo g903f and decided to install the stock rom to it via odin. While flashing the procedure failed and the phone fell off the cable, now it shows no signs of life (no sounds,vibrations,no logo) nothing. Can somebody tell me how i can unbrick the phone without a usb jig or jtag?
Click to expand...
Click to collapse
Try removing the battery, wait for a few seconds, insert it back in, and try booting to download mode
Related
i own a Samsung galaxy Spica i5700..the problem is that it is not able to boot... its not switching on ..when i connect to the charger it starts charging and when i press the end button ( power on/power off) the charging symbol disappears .... and i m not able to go into recovery nor in download mode ..i just want to go into the download mode so that i can flash it again ...please let me know if i bricked my samsung galaxy spica ??? is it possible to unbrick it??
please help me .... thanks in advance
I have the same problem.. i flashed a too big bootlogo, and now phone does nothing at all..
Hope someone could give us some advice, because i have no warranty...
hi i have a jig which you can buy from ebay it puts my i5700 into download mode.still not sure if it will help because i was changing the firmware on mine and it just loads the boot screens. i have forgoton how to get recovery using the buttons,it allso does the galaxy s and s11
If you have flashed too big bootlogo, then end. Trully bricked.
USB jig doesn't work on Spica.
Samsung_saad: what did you do before brick spica?
Unbrick!!
addictivetips.com/mobile/one-click-unbrick-for-samsung-phones-having-odin-guide/
When I originally rooted my phone, I used Odin... I haven't tried this particular method for unbricking, but apparently it works.
Hope that helps
I tried the one click unbrick method. Wasent working for me.
In the original post it says that it works with all devices using Odin 3. Is a while ago, but i think to remember i was using Odin 2.x the last times for flashing.
Eaven it dident work for me, might still be worth a try for you.
The button combination for download mode is "volume down + camera + power"
As long as you can get into that mode you're safe and the phone is not bricked!
[Q] Galaxy Note 3(N9005) - HARD BRICKED, Detected on PC as "QHSUSB_BULK" device
My Note 3 (SM N9005 - Lollipop Version) has been hard bricked. It doesn't powering up, no sign of any light/vibration. Looks like a dead phone.
When I connect my phone on PC, Device manager detect it as "QHSUSB_BULK" device. But on Odin 3.09 it doesn't detect anything.
Please please help me, PLEASE...........
Olyul said:
My Note 3 (SM N9005 - Lollipop Version) has been hard bricked. It doesn't powering up, no sign of any light/vibration. Looks like a dead phone.
When I connect my phone on PC, Device manager detect it as "QHSUSB_BULK" device. But on Odin 3.09 it doesn't detect anything.
Please please help me, PLEASE...........
Click to expand...
Click to collapse
Possible solution: HERE.
Joku1981 said:
Possible solution: HERE.
Click to expand...
Click to collapse
I have tried, it didn't work. I was using lollipop version.
debrick.img didn't work as I couldn't find the image file of lollipop.
PLEASE HELP ME TO GET OUT OF THIS PROBLEM!!!
Same here, i have a N9005 and tried all debrick img's present in the forums with a 32gb SD Card and no success.
Is there a Lollipop debrick image? Or if i have access to another N9005 (without root) how can i create one?
Regards.
N9005 Lollipop brick
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode and is detected by odin, but re flashing the firmware always fails.....is there a solution for this.....please help
mjmbirige said:
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode and is detected by odin, but re flashing the firmware always fails.....is there a solution for this.....please help
Click to expand...
Click to collapse
spamming please
Dear all,
Could somebody help me please. My Note 3 LTE (N9005) can not make/ receive calls. I can use internet, play song, etc...
When I make/ receive call phone is hanging too long and also call is can not reach to another phone.
I have tried to fix too many way.
1. EFS restore.
2. Cache clear (even flash new rom also)
3. Update kernel.
4. Restore my old working backup before.
PS. I'm using Audax ROM (lolipop).
I hope someone can help me out from this things.
Thanks in advance.
Hi every one,
I have a G900V that runs a cm ROM(I flashed the custom rom), the phone was fine until 3 days ago,
I tried to boot the phone and nothing happen!?? black screen, no sound no thing respond!!
There is only a vibration when I plug the battery, even if I don't press the power button.
I tried to go recovery or flash but no chance. My computer recognize the phone when plugged as Samsung_Android but I have no access to files or anything else.
Odin also doesn't recognize the phone.
I m thinking to try the unbrick way but before I would ask for your advices please.
Thank you
The phone is a refurbished Galaxy S5.
can anyone help me with my problem?!...
earlier today, i tried to upgrade my grand 2 from 4.3 to 4.4.2 via odin.
I downloaded all the required files and started the process, i got my phone into download mode and plugged it in my pc (i used a cheap usb cable) and pressed start.
after 30 seconds it stopped and failed the upgrade.
i tried to flash it again and it was the same.
now my phone won't even boot or charge or enter download mode.
PLEASE HELP!
sorry for the long post.
Its ok brother...it happens...and i dont think so its becuz of cheap usb cable i think its becuz ur ROM was not properly downloaded!
Now as becuz u cant go to download mode...try going to recovery and reset your phone ! if you get successfuldo that...i think you'll be able to boot to download mode #likemypostifyoufeltok
Hello devs,
I was trying to flash the latest firmware PDA G550FYXXU1BQE2 and CSC G550FYODD1BQE2 on my Galaxy On5 (SM-G550FY) (ROOTED). When I was flashing it stuck on flashing sboot.img then i removed the usb cable , removed the battery and reinserted and trying to boot in download mode but it wont boot in download mode or in recovery. The phone is totally dead now.
No response to my PC.
Please help me to get out of this...
Any help would be greatly appreciated
Thanks!!!
Are you able to adb into phone from pc?
vtinoc said:
Are you able to adb into phone from pc?
Click to expand...
Click to collapse
No, It is totally dead.