Database Users

need help wit sgt-p1010, please!!!!!!!

hey guys is will need some help with this device im not kind of a noobie on this kind of things bcs i been working with several phones, like the veteran xperia10, galaxy ace, motoroi2, etc etc. but never with a tablet
here is what it happens a friend ask me if i can upgrade his sgt-p1010 to a newer version, honeycomb or maybe ics, i´ve read a lot of posts regarding this on how to upgrade it trough odin everything was fine until the reboot of the device, bcs by my mistake i flash a rom of the 7.7" tab and this one is a 7" only now the tab is not turning on, odin is not recognizing it, either samsung kies or the pc. buttons are not responding it wont charge and cant enter to download mode.
I REALLY NEED HELP FROM U GUYS, HOPE U CAN HELP ME
ps. srry for my english :laugh:

This kind of thing can result in the inability to boot which can only be repaired by the use of specific hardware, i.e. this could be a "hard brick". Then again, maybe it can be restored to working order by flashing it again (a "soft brick"). So the very first thing you need to know is, can it get to download mode?
Turn it off, if it's switched on, and charge it for a couple of hours,say four hours. Use the original charger connected to mains. It doesn't matter if it shows anything, or nothing on the screen, let it charge. This is to make sure flashing it won't fail because it doesn't hold a charge.
Now connect it to the PC with the original USB cable. Then after making sure it's switched off, switch it on by pressing the On/Off button, while simultaneously the Volume UP switch. Press them both at the same time, and keep them pressed! If you're lucky you'll get the yellow graphic with the download text. A phone symbol, an !, and a PC symbol is fine too. Even if it doesn't show anything, you may be in download mode, so install the right drivers, and hopefully Odin or Heimdall will recognise is, and will allow you to flash the right ROM.

well i already let it charge for all night long and nothing happens after i perfomed the flashing the screen was totally in black but it doesnt shoes anything i mean the tab was turned on, then apparently batterie dies and after that is not charging. already tried with the heimdall thing but it says that device is not connected.
I think that this is going to be a HARD BRICK
so do u thhink there is another way to solve it?????
or it will be necessary the JTAG stuff???? bcs i dont want to try that it seems that is very difficult to me bcs i dont know nothing about hardware jejejeje

You have installed the Heimdall driver? It's called zadig.exe. Then you have to go to download mode and connect the Tab to the PC with the USB cable. Then Heimdall hopefully will detect the Tab.
If there's no way software will revive the Tab, it's hard bricked and will need hardware to get it working again. There's this guy mobiletechvideos.com who will repair any kind of brick. Basically he uses the JTAG on the board of the Tab and a special box to flash the right ROM to the Tab, even when it's dead. Some here have tried the service, and they say he's quite reliable. Another way is to modify your Tab with Adam Outler's Unbrickable Mod. It's brilliant, you can't soft brick your Tab after that, but it involves soldering very small components on the board of the Tab. The mobiletechvideos guy can do it for you I believe.

Well, I guess you just got a hardbrick .
The only way to fix this problem is go to SAMSUNG SERVICE CENTER.
Sent from my GT-P1000 using xda app-developers app

HELP!! Root and recovery problems!

Hello guys (and girls?)
I tried to root my Note 4 (SM-N910f) and failed! Now I cant even start my phone. It keeps restarting with some text and number up left corner.
When I try to restart phone via HOME BUTTON, POWER BUTTON AND VOLUME DOWN BUTTON a message appears and says that firmware recovery problem encountered.
what should i do?? (Besides paying for it)

Hacmemet said:
Hello guys (and girls?)
I tried to root my Note 4 (SM-N910f) and failed! Now I cant even start my phone. It keeps restarting with some text and number up left corner.
When I try to restart phone via HOME BUTTON, POWER BUTTON AND VOLUME DOWN BUTTON a message appears and says that firmware recovery problem encountered.
what should i do?? (Besides paying for it)
Click to expand...
Click to collapse
hi ,
in short ,this is what i have done in past ( to get out of soft brick )........................Flash correct stock ROM with Odin .!
Pull battery and insert again ,then same as above Home ,power, volume down to try to get into download mode ..?
if so ,connect to pc and flash correct stock via Odin.
futher ..
i have N910F ,stock Rom ,..BOC5 ..rooted with cf autoroot ( make sure you have correct zip, for you phone and software ? ) and running a custom recovery, CWM .( also make sure you have correct version CWM ..see screenshot is what i used to flash CWM )
Good luck

willcor said:
hi ,
in short ,this is what i have done in past ( to get out of soft brick )........................Flash correct stock ROM with Odin .!
Pull battery and insert again ,then same as above Home ,power, volume down to try to get into download mode ..?
if so ,connect to pc and flash correct stock via Odin.
futher ..
i have N910F ,stock Rom ,..BOC5 ..rooted with cf autoroot ( make sure you have correct zip, for you phone and software ? ) andrunning a custom recovery, CWM .
Good luck
Click to expand...
Click to collapse
Hello, thanks for the reply!
I cant seem to find the right version (Bootloader?) for my Note 4. It also says that i need to connnect with Kies but Kies dosent seem to connect with my phone.

Hacmemet said:
Hello, thanks for the reply!
I cant seem to find the right version (Bootloader?) for my Note 4. It also says that i need to connnect with Kies but Kies dosent seem to connect with my phone.
Click to expand...
Click to collapse
hi ,
don't understand with what you mean right version ?
what device you have ..eg N910F........?
what software running on phone ..see phone .../settings /about device.....eg N910FXXUIBOC5
My thoughts on KIES is not good ..( never worked for me )
i flash my software /root /recovery via ODIN
good luck

Plz help me to root my phobe
Sent from my X1 Beats using XDA Free mobile app

dazzling dhana said:
Plz help me to root my phobe
Sent from my X1 Beats using XDA Free mobile app
Click to expand...
Click to collapse
hi ,
you seem to be in wrong "phone /device " forum ?
search for your correct phone /device using XDA search .
Bottom line ,never heard of a "phobe " ?
sorry ,can't help .
good luck

willcor said:
hi ,
don't understand with what you mean right version ?
what device you have ..eg N910F........?
what software running on phone ..see phone .../settings /about device.....eg N910FXXUIBOC5
My thoughts on KIES is not good ..( never worked for me )
i flash my software /root /recovery via ODIN
good luck
Click to expand...
Click to collapse
Hello
I cant start my phone up, i can eather go into download mode or a screen which says i need to recover firmware.
and yes I have SM-N910F .. I still dont know exactly what to do!

Hacmemet said:
Hello
I cant start my phone up, i can eather go into download mode or a screen which says i need to recover firmware.
and yes I have SM-N910F .. I still dont know exactly what to do!
Click to expand...
Click to collapse
hi ,
First ,im not sure what you mean with "start ". your phone,is it commpletely "dead " ?
if so have you plugged it into wallsocket/charged ? and then tried again ?
Can you boot up your phone /do you see Samsung logo ?
What happens when you do ...power /volume down/home button ...?
If you can boot and see Samsung logo, what i can suggest( at this stage )
is to search for video on XDA /or Youtube .
how to enter download mode ..
eg
https://www.youtube.com/watch?v=p-zvwUS6as4
This should give you idea about download mode .
good luck

willcor said:
hi ,
First ,im not sure what you mean with "start ". your phone,is it commpletely "dead " ?
if so have you plugged it into wallsocket/charged ? and then tried again ?
Can you boot up your phone /do you see Samsung logo ?
What happens when you do ...power /volume down/home button ...?
If you can boot and see Samsung logo, what i can suggest( at this stage )
is to search for video on XDA /or Youtube .
how to enter download mode ..
eg
https://www.youtube.com/watch?v=p-zvwUS6as4
This should give you idea about download mode .
good luck
Click to expand...
Click to collapse
Hello. I get to see the samsung Logo but that is as far it goes, then it restarts before it gets on dekstop and then over and over.
UNSLESS I PUSH home buttion, volume......then it goes to download mode - but my phone can recoer with kies and i dont know what to do with Odin.

Hacmemet said:
Hello. I get to see the samsung Logo but that is as far it goes, then it restarts before it gets on dekstop and then over and over.
UNSLESS I PUSH home buttion, volume......then it goes to download mode - but my phone can recoer with kies and i dont know what to do with Odin.
Click to expand...
Click to collapse
If your Phone is able to go in Recovery Mode(Press Powerbutton+Volume UP+HOME to go in RecoveryMode) Either its Stock Recovery Or Custom recovery....
Wipe/Format every thing......
Than try to Go in Download mode if Suceeded than you should Try to Download this & Flash VIA Odin its Stock Touchwiz Lollipop Multi CSC firmware....
or Download Your Rom from Sammobile Here
I hope your problem will be solved

Hacmemet said:
Hello. I get to see the samsung Logo but that is as far it goes, then it restarts before it gets on dekstop and then over and over.
UNSLESS I PUSH home buttion, volume......then it goes to download mode - but my phone can recoer with kies and i dont know what to do with Odin.
Click to expand...
Click to collapse
hi ,
well if you can see Samsung logo ,that good !!
your phone seems to be soft bricked..( not really very big problem ,don't worry ..!!!! )
Only way to fix , is to flash your current stock ROM .
if you prefer Kies well ,i stated in above post that i don't think much of Kies .
One point i would like to point out.
Download mode ...
first pull battery ..then insert battery
if you hold buttons ..home +power + volume ......you get to a triangle warning........then press volume up again ..download mode (you will see same as screenshot( its an old foto of my Note 2 , but similar ) ....download mode ..Green Android man ..note if you want to get out of this ..pull battery )
good luck
post note
i have had same problem as you in past once or twice...!
fixed it with reflashing correct stock rom .
So just try to think positively ,it really very small issue .

THanks DUDE!!!

How to fix a galaxy j1 SM-j100h hard brick

Hi, i want to fix a phone of my friend by flashing it with odin, but things go wrong, the phone after failing wont start or respond to any button, i dont know what to do, please any help would be appreciated
Samsung Galaxy J1 SM-J100H
Edit:
Thanks xEmre66 for your reply, unfortunately no, i think i break the boot image, the phone wont boot on download mode even if i use 300k jig, i think the only solution is to use an sd card filled with the boot image, but i dont find in website a solution like that.

I tryed many solution but no one work, please if someone have the some problem tell me.

Can you get into the DownloadMode? (ODIN MODE)???
Sent from my SM-J100H using XDA-Developers mobile app
---------- Post added at 08:58 AM ---------- Previous post was at 08:57 AM ----------
I have this phone but it is not my main phone but maybe I can help you.
Sent from my SM-J100H using XDA-Developers mobile app

i'm working on this problem..
i resolved,
share there

OSKCHAST said:
i resolved,
share there
Click to expand...
Click to collapse
Please can you share the solution ?, i cant fix the phone.

same problem here
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???

caseres84 said:
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???
Click to expand...
Click to collapse
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.

xEmre66 said:
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.
Click to expand...
Click to collapse
same in here. I flash original rom from sam mobile site and my samsung sm-j100h is bricked now. i flash using odin and everthing was ok and it was pass. but nothing happend later on, screen remains black and I don't know what to do.
or atleast tell me can I get somehow all data stored on phone, if yes how to do it

guys still nothing???
same problem guys i bricked the phone 2 days ago with the original firmware from sam mobile u.u i put my samusung j1 in download mode and with odin i done the reflash odin it was green and said me passed but then when i tried to turn on the phone nothing happened my phone is died hard bricked is there a guys something to do to repair him?

i got the same problem..
the phone was completely DEAD after i followed all the instructions here => https://www.youtube.com/watch?v=1T9fxno2s68
Please somebody help us..
Here's my thread => http://forum.xda-developers.com/android/help/help-sm-j100h-dead-power-flash-t3511894
Thank you very much..

im using sm j110h and i too flashed orginal stock rom via odin but unfortunately i forget to put the batteries on and i fonud that after that i got pass message only now the screen remaines black and not getting to download mode and not switching on. does anyone help me on this problem hope will get a solution thanks in advance

Gal J1 of sadness.... but still hoping
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:

Chrisjopett said:
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:
Click to expand...
Click to collapse
PM me pls and tell me how you flashed it etc.

Help
I have same problem,hard brick.Can anyone help?

somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:

kkq29 said:
somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:
Click to expand...
Click to collapse
Can you get into Odin Mode? If yes, flash the stock firmware of your region (here is a fast server which provides very fast downloads: fw.updato.com) If no, then you should change your battery as you're saying "it came from my battery" and try the first step again.
If it doesn't help as expected, then your phone is hard bricked and can't be repaired at all. The only solution would be changing the motherboard, but I would not waste my money on a low-end device motherboard and I would directly buy a new phone. :/
Regards,
xEmre66

If I am correct...
Then SM-J110H have Spreadtrum SC7727S
Here is Pinout for Direct eMMC...
https://postimg.cc/image/ul680l5jv/
This Pinout seems also to work with:
Code:
SM-G318HZ
SM-Z130H
I have leaked SM-Z130H PDF... where Instruction is inside to repair with tweezer... USB cable + Spreadtrum Tool:
Code:
[B]ResearchDownload[/B]
In theory something similar should be possible with SM-J110H...
I have at the moment only 1 problem... to create PAC file...
No idea from where I can get:
Code:
FDL1
FDL2
Best Regards
Edit 1.
Sorry, seems I was drunken...
It is sooo hard to find Posts or Threads about SM-J110H...
But it seems SM-J100H also Spreadtrum device...

xEmre66 said:
PM me pls and tell me how you flashed it etc.
Click to expand...
Click to collapse
PM me too please
My teacher phone has a same problem, hehehe.

same problem here. my phone got stuck up with samsung logo then i just dowloaded a firmware on sammobile and i flash it via odin at first it passed then my phone did'nt turn on anymore.

J100H / DD Finding Deadboot solution
Hi ... guys me too having this sort of problem and i found bad about samsung using 32bit - Spreadtrum SC8830A EMMC chipset here
Fix solution Not Found still! if i done i will tell you!
on = SM-J100H/DD --- corp =samsung yateley, uk
ok friend iam searching for Solution for 3days bt i found none= with a clue
It is J100H on serial port= SPRD U2S Daig (ComXX) usb says= SPRD COM Emumerator
this means - all sprd flashing been done on this 2 port only - in Miracle Box it says -
Scanning USB Serial port...
SU2Serial Port: COM64
Connecting to Phone,Wait..
Done.
Infor: SPRD3
Initialize boot19...
>>BootLoad Error. ID: 1
so my option is if we build a sprdp.bin and flash in AP(PDA) it will boot to Download mode
and dont ask me where is that file i dont no - if any one can provide a real backup pit.pit file
via phone to me i can find something and let u know it. Only from a alive phone J100H/DD
plz friends i need help any dumps or pit. and if any one has a alive J100H/DD please tell me.!
so i can get some help from u --If you wish to help

Help!! I bricked my grand 2 :*(

can anyone help me with my problem?!...
earlier today, i tried to upgrade my grand 2 from 4.3 to 4.4.2 via odin.
I downloaded all the required files and started the process, i got my phone into download mode and plugged it in my pc (i used a cheap usb cable) and pressed start.
after 30 seconds it stopped and failed the upgrade.
i tried to flash it again and it was the same.
now my phone won't even boot or charge or enter download mode.
PLEASE HELP!
sorry for the long post.

Its ok brother...it happens...and i dont think so its becuz of cheap usb cable i think its becuz ur ROM was not properly downloaded!
Now as becuz u cant go to download mode...try going to recovery and reset your phone ! if you get successfuldo that...i think you'll be able to boot to download mode #likemypostifyoufeltok

SM-950F Hard bricked, JTAG?

Hey
So I was flashing android 7.0 to an S8 and it completely died, this is how completely:
- No screen/LED/vibration motor
- No safety/recovery/download mode (and don't ask about button combos, I've tried them all)
- No USB recognition from device manager (not even as exynos in other devices, just nothing)
- USB jig does nothing
- It is however recognised by wireless chargers (but I doubt that has any real significance)
At this point my question is would a JTAG even work on it? Or is my only hope a complete motherboard replacement?

S8 Hard bricked
A_Bad_Marksman said:
Hey
So I was flashing android 7.0 to an S8 and it completely died, this is how completely:
- No screen/LED/vibration motor
- No safety/recovery/download mode (and don't ask about button combos, I've tried them all)
- No USB recognition from device manager (not even as exynos in other devices, just nothing)
- USB jig does nothing
- It is however recognised by wireless chargers (but I doubt that has any real significance)
At this point my question is would a JTAG even work on it? Or is my only hope a complete motherboard replacement?
Click to expand...
Click to collapse
hello!
same happened to me ......dont worry i will help u....
i think u flashed aosp rom
phone is not hard bricked its still not turned off believe me........
do the following:
donot charge phone for atlesat 24 hours .......
after 24 hours try to boot into download mode press button for like a minute it will work in multiple tries,,
immediately flash twrp and when flashed successfully suddenly press vol down + bixby + power it will boot into recovery
charge for 1 -2 hours , clear system and every thing if you have backup thats good other wise flash firmware......donot turn in till flashing the system and data in recovery mood......boot into download mood from recovery and there you go....if still a problem inbox me

Thanks, I'll give it a shot

ok let me know then

Jtag dead phone to life and rewrite IMEI
I had the same thing, sent it to Fonefunshop in England, they said they could fix it, the didn't even open it as discovered by the guys who fixed it and is necessary to use jtag.
Fonefunshop said eMMC chip was bad, which is not true, but that led me to search for someone to replace the chip. I found A2Z cellular in Ottawa, Canada. They got the phone to boot up, but IMMEI was null( I did this trying to flash back to stock after TWRP screwed up). They rewrote original IMEI , now phone works like new. These guys are amazing.
http://a2zcellular.com/

Thank you all for the advice.
But I have now managed to unbrick and reflash the firmware. khawarjaved's advice turned out to be what fixed it in the end.
That was close, nearly lost £30

A_Bad_Marksman said:
Thank you all for the advice.
But I have now managed to unbrick and reflash the firmware. khawarjaved's advice turned out to be what fixed it in the end.
That was close, nearly lost £30
Click to expand...
Click to collapse
I have been through that situation man.... So always ready to help, ??

Hi pros
I'm in kind of a similar situation....I think I flashed MY 950U PIE with wrong BL
This phone is dead....Doesn't boot...no download mode....No recovery mode....
When connected to pc....device manager Recognises device as QUALCOMM HS USB 9008
Any way to brig it back to life...?

Your phone is connected in edl download mod. It will accept special files which will allow it to boot to download mode and let you flash stock firmware
The tool used for this is emmcdl.exe
It has to come with phone specific files
No idea where to get it. Ask people here, those who root phones. They know.