Looking for help with a S7 edge. Odd screen message. - Samsung Galaxy S7 Edge Questions and Answers

After getting it wet, drying in rice for a week and replacing the battery my S7 edge flashes the 8 primary colors at me. Still won't charge, doesn't post.
Any clue to what the screen is trying to tell me?
Distressed and out of searches

Rice is useless...
It's still wet... or permanently damaged.
Pull battery asap.
Flush copiously with anhydrous isopropyl alcohol (min 93%) in a dry environment. Get as much as the alcohol to drain off as possible.
Use best judgement as to getting alcohol in between the display and glass; avoid doing this.
Place in warm (80-100F) dry room with a fan on it for at least 3 days.

blackhawk said:
Rice is useless...
It's still wet... or permanently damaged.
Pull battery asap.
Flush copiously with anhydrous isopropyl alcohol (min 93%) in a dry environment. Get as much as the alcohol to drain off as possible.
Use best judgement as to getting alcohol in between the display and glass; avoid doing this.
Place in warm (80-100F) dry room with a fan on it for at least 3 days.
Click to expand...
Click to collapse
Thank-you, I'll get on that today. Have you seen the screen message b4?

rlewisii said:
Thank-you, I'll get on that today. Have you seen the screen message b4?
Click to expand...
Click to collapse
No idea of what b4 is.

blackhawk said:
No idea of what b4 is.
Click to expand...
Click to collapse
Old geek way of saying "before" (b4).

rlewisii said:
Old geek way of saying "before" (b4).
Click to expand...
Click to collapse
Lol, acronyms my arch nemesis
Done think it's a message per se but an error.
Probably a test pattern built in to the firmware diagnostics.

I get it. I was thinking something along those lines too. I just don't know how to search for something of that nature, so I figured there would be a few guys on this site that get down into the weeds and may have seen it.

rlewisii said:
I get it. I was thinking something along those lines too. I just don't know how to search for something of that nature, so I figured there would be a few guys on this site that get down into the weeds and may have seen it.
Click to expand...
Click to collapse
I don't think it's an error message but rather a random error... which is worse.
The Samsung site forum members might have more insight.

Related

dropped my hero in the toilet.

Thankfully it was a quick dip. Took it out and blow dried it. After some Initial problems everything seems to be working. Was doing some weird things at first. Think I can expect any issues down the road?
How long did you wait before you put the battery in? It may seem dry, but there may have been moisture on the inside..
Honestly I didn't wait too long because I was expecting a really important call and there was no moisture under the screen. I think the case helped protect it a bit. I'm replying to this thread with my phone so sofar so good. *fingers crossed*
Was there piss and poo in the toilet? That will corrode it. However, I do plan on throwing my Hero in the toilet as soon as the Nexus One comes out for Sprint
mbell75 said:
Was there piss and poo in the toilet? That will corrode it. However, I do plan on throwing my Hero in the toilet as soon as the Nexus One comes out for Sprint
Click to expand...
Click to collapse
Ill buy it for $50 or under..
Jus10o said:
Ill buy it for $50 or under..
Click to expand...
Click to collapse
Before or after its been thrown in the toilet?
No pee or poo. I have insurance, but it seems to be fine.
You probably need to wipe it or else it'll have really sh1tty performance.
my girl was "helping" by doing the laundry and my hero made it thru the washer and half way thru the dryer i dryed it out for a few days got stuck on the boot screen ,wiped and flashed a new rom to it and it works perfect this was last month and still no problems .... knock on wood
I did the EXACT same thing. Dropped in in the toilet, snapped it out really quickly and yanked the battery out and let it dry for about 24 hours. Plugged it in and turned it on and it worked perfectly.... for about 2 weeks. After a couple weeks, it wouldn't power on. All that it would do is the orange indicator light would come on when I plugged it in. The water indicator strip on the battery and the one underneath the battery weren't even red but when I took it to a sprint store that had a tech, they showed me that there was corrosion on part of the board when they took it apart and the indicator on the board was solid red. If you can, I would recommend taking it apart further and trying to dry it out even deeper. That's what caused the ultimate demise of mine.
cmccracken said:
You probably need to wipe it or else it'll have really sh1tty performance.
Click to expand...
Click to collapse
Quote of the day.
Ok, well the update is everything works except 5he phone no longer charges. What do I do? I'm rooted and the indicator shows water. The one on the battery doesn't because I was using an aftermarket battery at the time.
boredmug said:
Ok, well the update is everything works except 5he phone no longer charges. What do I do? I'm rooted and the indicator shows water. The one on the battery doesn't because I was using an aftermarket battery at the time.
Click to expand...
Click to collapse
suck it up and pay the $100 to the insurance to get a refurb.
Yea, that's kinda what I was figuring, but do I need to put the dang thing back to stock?
cmccracken said:
You probably need to wipe it or else it'll have really sh1tty performance.
Click to expand...
Click to collapse
Oh I see what ya did there
boredmug said:
Yea, that's kinda what I was figuring, but do I need to put the dang thing back to stock?
Click to expand...
Click to collapse
yes put it back stock before shipping.
Dude, I can't ship this thing off. It's my only phone and I have to have a phone. Can't I just take it to a corporate store?
oh shiit.. I would be pissed off..
diffinately do a anti bacteria wipe .. it will be on your face and near your mouth!!!
Rules for wet phone:
Pull Battery, don't even try turning it on (will fry components)
Put in bowl with dry rice for 24-48 hours
Take phone out and try the power
Cook/Eat rice
I really thought this was common knowledge by now...
tstack77 said:
Rules for wet phone:
Pull Battery, don't even try turning it on (will fry components)
Put in bowl with dry rice for 24-48 hours
Take phone out and try the power
Cook/Eat rice
I really thought this was common knowledge by now...
Click to expand...
Click to collapse
I would do this after completely dissasembling every layer of the phone and carefully drying it all out with a blow dryer.
All it takes is 1 drop of moisture, in one of the many layers of these complicated devices, to cause a short and cripple the phone.

[Q] dropped vibrant into the toilet...

i was at a bar i didn't even want to be at in a small town in colorado.
at first i just stared at it for 10 seconds thinking "at this point i should just leave it there because the damage is done"
then all of a sudden it started goign crazy with lights and "samsung vibrant" flashing everywhere on the screen, so i decided to dive in and save it. then i violently washed it with hotwater under the sink and only after washing my hands did i finally open it and take out the battery (at this point, the screen shown brightly with "samsung vibrant).
3 hours later, hoping it had dried completely, i put the battery in and again it came to life with the samsung vibrant text. i quickly took the battery out.
i jsut tried it again and it wont turn on at all. is it over?
maeglutz said:
3 hours later, hoping it had dried completely, i put the battery in and again it came to life with the samsung vibrant text. i quickly took the battery out.
Click to expand...
Click to collapse
You shouldn't have done that, the phone was still wet. When you did that you fried your phone. If you would have put your phone in a bag of rice or let it dry out for a few days then it might have been ok. Hope you have insurance.
Yeah, I always heard that half the time, if you power it off and let it dry, and make sure it's dry before trying to power it on again, you can luck out.
omg omg omg!!
when you responded, my heart dropped and then i ran over to see if it would start again one more time (i plugged it into the charger) and i pressed the on button and it showed it was charging. i'm goign to leave it alone now in a bag of rice like you said. but i dont know if i can wait 3 days.... i never learn my lesson
Hahaha I dropped a phone in the toilet once. Good luck
i know i'm getting ahead of myself, but just SAY that if i finally do get it to power on, but nothing shows up except a "samsung vibrant" screen, is there a way to reinstall the OS?
My son left his ipod nano in his pants pocket. It got washed. I dried it and did the rice thing for 2-3 days (can't remember how many). Charged it up. Just like new.
The moral of the story? If you can't wait 3 days to see if it has been salvaged, you don't deserve a new phone...
Droidicus said:
My son left his ipod nano in his pants pocket. It got washed. I dried it and did the rice thing for 2-3 days (can't remember how many). Charged it up. Just like new.
The moral of the story? If you can't wait 3 days to see if it has been salvaged, you don't deserve a new phone...
Click to expand...
Click to collapse
ugh. fine. i'll wait. but i dont know what i'l do with myself in the meantime.
maeglutz said:
i know i'm getting ahead of myself, but just SAY that if i finally do get it to power on, but nothing shows up except a "samsung vibrant" screen, is there a way to reinstall the OS?
Click to expand...
Click to collapse
Uh, dude, it would not be a software problem... If it doesn't boot up its a hardware problem.
Just make sure its sitting nicely covered in the dry rice....wait...you did use dry rice right? Not cooked rice??? lol kidding...
Droidicus said:
Uh, dude, it would not be a software problem... If it doesn't boot up its a hardware problem.
Click to expand...
Click to collapse
if you read my question, i asked what i could do if it DID power up but only with a generic screen
I wouldn't even bother trying... It's fried man...
nearblack said:
I wouldn't even bother trying... It's fried man...
Click to expand...
Click to collapse
we'll see. the green charging light gives me hope. i will definitely not pay full price for a new one. this was $99 through costco-- which is what a phone should cost.
Don't over cook the rice. Stir-fry it with some egg, carrots, scallions, peas, and barbecued pork. Everything should be okay.
maeglutz said:
we'll see. the green charging light gives me hope. i will definitely not pay full price for a new one. this was $99 through costco-- which is what a phone should cost.
Click to expand...
Click to collapse
This is why the data is so expensive in America. The companies need to get back the money they lost on the phone.
The phone might be fried since you didn't wait to turn it off. I've read the bag of rice will work. Next time wait until you phone is dry and just reroute you calls with Google Voice. I'd still try the rice too.
Sent from my SGH-T959 using XDA App
Did you say after you took it out the the toilet you then washed it under hot water? Seriously? You thought "oh, its wet, I shall now soak it some more?"
Sent from my GT-I9000 using XDA App
Arghh..kill this nasty thread...lol
Sent from my Samsung Vibrant using XDA App
To clarify a little... when you drop the phone in water, the FIRST thing you do is take out the battery and sim card. Then you let it dry COMPLETLY, this takes days, not hours. Like said above, rice does good, you put it in a zip lock, take out the air and seal it.. leave for AT LEAST 3 days so the rice can absorb the moisture, THEN you try to turn it on for the first time. If you try turning it on when there is moisture you will fry the phone, water conducts electricity and brings power where there is not supposed to be and burns circuits, so by putting the battery and attempt to turn it on prematurely, you are killing it causing short circuits internally.
Sent from my SGH-T959 using XDA App
make sure you throw the rice away after you're done or better yet, feed it to some iphone fanboy
dq13 said:
To clarify a little... when you drop the phone in water, the FIRST thing you do is take out the battery and sim card. Then you let it dry COMPLETLY, this takes days, not hours. Like said above, rice does good, you put it in a zip lock, take out the air and seal it.. leave for AT LEAST 3 days so the rice can absorb the moisture, THEN you try to turn it on for the first time. If you try turning it on when there is moisture you will fry the phone, water conducts electricity and brings power where there is not supposed to be and burns circuits, so by putting the battery and attempt to turn it on prematurely, you are killing it causing short circuits internally.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
+1 and ty , I just read through this post and wondered when someone would point out the OP already turned it on to "check" it after being in the water.
Time to order a replacement, even if it does for some magical reason power on that phone is going to be issue city.

[Q] Droid survived dunk- Now no vibration/ haptic feedback

Hello. I hate to even make the post, but I do so love XDA-developers, and maybe somebody can help me out.
I managed to dunk the phone, lets not discuss how, in some pond water. I scoured the int3rwebz for solutions and seemed best advice was to dry with desiccant and a suggestion of an alcohol wash or use of electrical contact cleaner.
The phone was on when dropped, off when recovered. Water damage indicator on the phone was tripped, but the battery still shows red x's. Waited the requisite amount of days and the phone works! everything works.
Now the problem- I get a bit worried about the left over pond scum and I decide I'd be the mad scientist to use electrical contact cleaner on it. Sprayed the suspect areas and immediately blew out the phone with compressed air, let it sit a few nights in desiccant. Now I have some small bubbles in the screen( which was NOT sprayed...) . FML. figure they may be trapped cleaner and eventually evaporate. Not a huge deal, just a bit annoying.
THEN I realize my vibration now does not work. I attribute this to either the water or contact cleaner.
I am now one of a million posting "PHONE GOT WET HALP!!!" and I apologize for such a newbie post, but is there any hope for the vibration to begin working again magically?
Haptic feedback is a fairly big part of this phones operation, and I use silent mode at work with vibration.
If I am screwed on the vibration I have another newbie question:
Can you set different ring tones or sms tones to certain contacts? I have had phones that do this in the past but I cant seem to find anything on this one. I am using the newest version of fission at the moment- 2.6.1.
THANKS for any help/ useful information!
-Andrew
If you look in the battery compartment, I think in the lower left, you can actually see the vibration motor. I would check and make sure that nothing is blocking it. However, I would venture to say that being that it is the only (powered) moving part and being it being so exposed, I would imagine that it would be the most likely to get short circuited or otherwise damaged by the water.
Concur
-Gilgamesh- said:
If you look in the battery compartment, I think in the lower left, you can actually see the vibration motor. I would check and make sure that nothing is blocking it. However, I would venture to say that being that it is the only (powered) moving part and being it being so exposed, I would imagine that it would be the most likely to get short circuited or otherwise damaged by the water.
Click to expand...
Click to collapse
I would concur that it was probably short circuited. Do you have insurance?
I agree. I absolutely did not purchase insurance. Live and learn. That's why I don't mind using it as is.
On to the second question- any way to select varying tones for different contacts in phone ringer/ sms tones? Would I just find something on the market for this? again using fission ROM.
Can you change the green missed call/ sms received LED?
I should have left the phone as it was after drying and not gotten paranoid about the "left over pond scum mineral residue" Oh well.. again live and learn.
Thanks again for the replies.
-Andrew
Open the contact that you wanna change, hit menu and select "options" and it's obvious from there. As for the LED, try an app called Missed Call.
Sorry I missed those to begin with.
atothec said:
Hello. I hate to even make the post, but I do so love XDA-developers, and maybe somebody can help me out.
I managed to dunk the phone, lets not discuss how, in some pond water. I scoured the int3rwebz for solutions and seemed best advice was to dry with desiccant and a suggestion of an alcohol wash or use of electrical contact cleaner.
The phone was on when dropped, off when recovered. Water damage indicator on the phone was tripped, but the battery still shows red x's. Waited the requisite amount of days and the phone works! everything works.
Now the problem- I get a bit worried about the left over pond scum and I decide I'd be the mad scientist to use electrical contact cleaner on it. Sprayed the suspect areas and immediately blew out the phone with compressed air, let it sit a few nights in desiccant. Now I have some small bubbles in the screen( which was NOT sprayed...) . FML. figure they may be trapped cleaner and eventually evaporate. Not a huge deal, just a bit annoying.
THEN I realize my vibration now does not work. I attribute this to either the water or contact cleaner.
I am now one of a million posting "PHONE GOT WET HALP!!!" and I apologize for such a newbie post, but is there any hope for the vibration to begin working again magically?
Haptic feedback is a fairly big part of this phones operation, and I use silent mode at work with vibration.
If I am screwed on the vibration I have another newbie question:
Can you set different ring tones or sms tones to certain contacts? I have had phones that do this in the past but I cant seem to find anything on this one. I am using the newest version of fission at the moment- 2.6.1.
THANKS for any help/ useful information!
-Andrew
Click to expand...
Click to collapse
First off, this isn't really a newb post. Not once have I seen "is there any to trick Verizon into sending me a new phone blah blah blah"
Second, I think you got really lucky here especially for the phone having been on, and ESPECIALLY that the battery didn't get wet or damaged. For what happened, the vibration being gone is pretty minor damage.
orkillakilla said:
Second, I think you got really lucky here especially for the phone having been on, and ESPECIALLY that the battery didn't get wet or damaged. For what happened, the vibration being gone is pretty minor damage.
Click to expand...
Click to collapse
I agree. I guess mad at myself because it was ok before the contact cleaner (d'oh). Oh well, maybe it will reduce some corrosion.
And thank you -Gilgamesh- Don't know how I missed that. I'll try that app as well.
I have a hard time contact cleaner as being the culprit. If it damaged electronics, then it would kind of defy the whole point? Not trying to argue, just seems like it would be the least likely thing to do it. Was it powdery or foamy or something? Maybe it clogged up mechanism, maybe try poking at it with a quetip or something to dislodge it? Or maybe the air pressure pushed some moisture further inside where it could do some damage? Either way, guess I'll make sure to stay away from using it myself anyway. >.<
WELL.. the electrical cleaner in question does say to re-lubricate any movable parts as the cleaner will most likely dissolve oil/lubrication. My guess is that this vibration motor was lubricated if only in a small way.
I agree, unless the phone was submerged in something KNOWN caustic or corrosive, then I would just dry it, and be done with it. (I do also have the new screen bubbles/ dead pixels after the cleaner too.) I read the stories of people submerging in high grade alcohol after the water based dunk so I thought what the heck and the mentioned area in the lower left- looked like a board to me- was sprayed (of course with battery out). I tested the stuff on paper and it was dry within seconds just from air. I sprayed the phone out with compressed air afterward and another few nights in industrial strength desiccant.
So now I'm wondering if I spray some lube (WD-40 just a drop?) into this area in the lower left (Vibration motor?) of course with battery out and adequate dry time?
Thanks for staying with me. I installed a few LED applications and now at least know how to set different ring tones for different contacts.
Of course I'm ecstatic that the display even works after the submersion. I was already pricing 6-700 phones and even thought of...dare I say it... downgrading.
-Andrew
I really wouldn't. WD-40 is high pressure, thus when the tiniest little squirt would prob end up coating most of the inside of the phone. With the battery out I doubt it would cause any shorts, but it may still cause via corrosion because of the chemicals. IF I were to use any type of lube on it, I'd use something made for moving parts, such as the little thing of oil/lubricant you get with a hair trimmers. That way you can easily just put a small drop. That being said, I have no idea what effect using such a product might cause. May fix it, or could permanently damage the phone. Never really tried anything like that.
Personally I would just cut my loses now. There isn't very much damage, and you don't know how much more damaged could be caused by doing something like this. Just my opinion.
Yeah probably best to leave well enough alone at this point. Working screen for the most part, everything else working, just a dead vibration mechanism.
Lesson to be learned for anyone searching- if you have no real reason to beleive the device will be corroded by the substance the device was submerged in... JUST DRY IT WITH DESICCANT! Like I said mine was on and streaming music when dropped, completely off when recovered. I thought it was shorted out for sure, or at least would have tripped some kind of fuse only to be known by verizon/ motorolla techs to be cheaply replaced for refurbished units.
Anyway... just glad to still have a working device. Now to live this down as the GF got a $0.01 droid 2 at the same time as i did, but hers works perfectly fine (I smell a sabotage in the near future.....)
-Andrew
HAHA good luck with that.
atothec said:
Hello. I hate to even make the post, but I do so love XDA-developers, and maybe somebody can help me out.I
-Andrew
Click to expand...
Click to collapse
cant help you on the vibration part but for the contacts, try going to the contact hitting menu button-->options-->ringtone
edit: i was beat to it, my internet was slow to load and saw no other posts but he OP lol.
-Gilgamesh- said:
If you look in the battery compartment, I think in the lower left, you can actually see the vibration motor. I would check and make sure that nothing is blocking it. However, I would venture to say that being that it is the only (powered) moving part and being it being so exposed, I would imagine that it would be the most likely to get short circuited or otherwise damaged by the water.
Click to expand...
Click to collapse
HA! Decided that id add a drop of wd-40 to the vibration motor. After re-reading gilgamesh's post here I remembered seeing a turbine like piece of metal spinning with the compressed air. I was thinking the very lower left where the main board is exposed, but this is pretty much to the left of the middle of the battery. You can see a white motor with gears on the output shaft and the "spinning metal fan blade...thingy"
so, I pull my battery and.... blue silica desiccant ball! Dunno how I missed it. Removed it with a pencil, battery back in, fire it up, success!
So now I just have what im guessing is some left over cleaner under the plastic screen, but it could actually be lcd damage. Ill just have to see if it ever evaporates.
Still in the running for luckiest unlucky droid 2 user 2011!
thanks again guys,
-andrew
Oops- double posted. Anyway moral of the story is use desiccant, but block all passages (I used cotton on the audio jack and port at lower left that goes to mainboard, but forgot the vibration motor.) And don't get any cleaner anywhere near the screen as it seems to have messed up my lcd a bit.
Also- if your vibrate stops working make sure that metal fan spins freely when you blow on it/ use compressed air.
-andrew
Congratulations!! Glad to hear it's fixed now!!
Yeah I think that award is going to you lol. Glad to hear you fix it.
Damn you're one lucky mofo...for being unlucky that is...
Sent from my Evo "Z" unit on xda app.
Actually, I would say the opposite. One of the luckiest. Dropped it in a pond and came out working perfectly, in the end.

[Q] Wet S4... won't turn on...

Riding the motorcycle home tonight I got drenched for about 6 miles... normally not an issue and never has affected my phone in my back pocket before... but for some reason tonight was different...
about a mile from my house my music stopped working and didn't think much of it... but when I pulled into the garage and found my s4 was a bit wetter than normal and would not turn on my concerns grew...
Currently have the entire thing apart.. batter... case... even sim and microSD card out... there was not a lot of visible moisture on the inside... but I did find a few drops on the SD card once removed. Also the phone will not indicate a charge by led or on-screen.
I'm letting it dry out as much and as long as I can... other than just waiting it out... any tips somebody can give me? anything phone specific that I could do to help it turn on? (power+vol up+home something?) and is there a wet indicator on the phone some place? above the SD slot there are 2 brass connectors and a bright pink dot in a hole above them... is that anything unusual?
The phone does have liquid detectors. If you tried to turn on the phone you probably fried it. If you didn't turn on the phone yet leave it in ziploc bag with rice for a few days.
Put it in a jar of dry white rice for 24hrs. It will absorb all the mosture .. one of my friends drop his g3 in tolit and he did that ...booted again...trip..
---------- Post added at 09:22 PM ---------- Previous post was at 09:21 PM ----------
ViciousLSD said:
The phone does have liquid detectors. If you tried to turn on the phone you probably fried it. If you didn't turn on the phone yet leave it in ziploc bag with rice for a few days.
Click to expand...
Click to collapse
You beat me to it...damn...
If your daring enough you could try opening the phone and use 99% isopropyl alcohol (technicians alcohol) to clean the parts. Alcohol displaces the water so as you use a small brush (we call thrm acid brushes....not sure what the 'normal' world calls them) use a single ply tissue to absorb the water/alcohol.
Does anybody know where those liquid detectors are? are they visible with the back cover and batter out?
Thanks for all the quick responses... I will try the above and see how it goes... this is my primary way to be contacted and after just a few hours I already feel cut off... its also how I make my money (being on call.... work can't call... I can't make money!) so I'm looking at resurrecting old phones... but I was hoping for a quicker solution... but I'd rather take my time and save my phone... I was hoping the battery went dead... was yelling at me earlier... but obviously not the case.
Pilot143 said:
Does anybody know where those liquid detectors are? are they visible with the back cover and batter out?
Thanks for all the quick responses... I will try the above and see how it goes... this is my primary way to be contacted and after just a few hours I already feel cut off... its also how I make my money (being on call.... work can't call... I can't make money!) so I'm looking at resurrecting old phones... but I was hoping for a quicker solution... but I'd rather take my time and save my phone... I was hoping the battery went dead... was yelling at me earlier... but obviously not the case.
Click to expand...
Click to collapse
There is no quick solution. Keep it in the bag of rice as suggested, and leave it for at least 24 hours and I would even say try to go well beyond that for as long as you can hold out. Gotta make sure as much moisture as possible gets sucked out before trying to turn her over.
(What kind of bike you ride?)
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
I had a coworker do this.
put it in a bag with the moisture absorbers, silica gel, he left like over night in a zip lock and in the morning it started working again.
I would do the bag of rice or moisture absorbers as others mentioned. The worst thing you can do when a phone gets wet is plug it in or try to turn it on. It seems you tried both. Hope for the best. Next time, if ever there is one, if you see your phone is wet, quickly dry it up and take it apart as much as you can. Kill any power going to it (ie. remove the battery immediately). Then place it in a bag with rice or other moisture absorbers. I would leave it a day or two. Make sure it's fully dry. If you are brave, take a torx bit to it and open it up. Make sure everything is dry inside. Put it back together once it's dry and try to power it on. Most cases this will work. I hope it works for you. Sadly it's on the heels of the leaked image of the waterproof S4.
2007 zx-10r... wasn't quick enough tonight I suppose... doh!
my other phones I never tossed out are no help... the sim card won't fit... keep looking... keeps me from messing with my phone too much!
Pilot143 said:
2007 zx-10r... wasn't quick enough tonight I suppose... doh!
my other phones I never tossed out are no help... the sim card won't fit... keep looking... keeps me from messing with my phone too much!
Click to expand...
Click to collapse
Because the sim is too small? Just line up the gold contacts. I was able to get the microSIM working in my old captivate which takes a standard sized SIM just by carefully lining it up.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
plwalsh88 said:
Because the sim is too small? Just line up the gold contacts. I was able to get the microSIM working in my old captivate which takes a standard sized SIM just by carefully lining it up.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
Could also go to a local AT&T store and have them swap you to a full-sized SIM for a few days, if they're willing to work with you. Some reseller stores (non-corporate) may charge a nominal fee for the card. Keep in mind that once they deactivate a SIM card, it's toast.
But as the others have said, electricity to a wet device is typically fatal, so keep the battery and charger out as long as you can. As for the red/pink indicator: your warranty is now void. I've heard of ways to "bleach" the indicator, but I'd imagine that might be against XDA rules to even speak about. Also, check out some of the disassembly vids out there, they may be helpful in getting the water out or finding more indicators. *shrug*
Pilot143 said:
Does anybody know where those liquid detectors are? are they visible with the back cover and batter out?
Click to expand...
Click to collapse
See that pink dot? That means the phone got wet... it should be white.
Trust me, I know. I dunked a brand new 32gb S4 into the pool on the day it was released and had to buy a brand new one at full price later the same day. Most expensive upgrade ever.
Please read forum rules before posting
Questions and Help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Aou said:
I've heard of ways to "bleach" the indicator, but I'd imagine that might be against XDA rules to even speak about.
Click to expand...
Click to collapse
I demand this person gets banned for disclosing the bleach-to-indicator trick that hits Samsung hard on the pocket chipping away at the multi-bil dollar profits. What's next? They will demand an apology for little memory? a recall for easily breakable screens? What a nerve.
Kwon Oh Hyun
kreoXDA said:
I demand this person gets banned for disclosing the bleach-to-indicator trick that hits Samsung hard on the pocket chipping away at the multi-bil dollar profits. What's next? They will demand an apology for little memory? a recall for easily breakable screens? What a nerve.
Kwon Oh Hyun
Click to expand...
Click to collapse
That "trick" is pretty well known by the manufacturers. It may get by people at the store but the phone sent back to Samsung can be checked with Orthotolidine and show evidence of chlorine from residual sodium hypochlorite it will be billed to the original customer. Since it's obvious fraud further (legal) action may be taken so be warned before trying these "tricks".
according to the tmobile site, there should be a sticker somewhere in the back of the phone, and red/pink means water, white means normal
XxSHaDoWxSLaYeRxX said:
according to the tmobile site, there should be a sticker somewhere in the back of the phone, and red/pink means water, white means normal
Click to expand...
Click to collapse
no offense, but for future reference, keep a ziplock in your jacket. or two.
Slade8525 said:
no offense, but for future reference, keep a ziplock in your jacket. or two.
Click to expand...
Click to collapse
LOL
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
Slade8525 said:
no offense, but for future reference, keep a ziplock in your jacket. or two.
Click to expand...
Click to collapse
XxSHaDoWxSLaYeRxX said:
LOL
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Actually, not a LOL at all (well maybe a chuckle), but it is a well known practice to avid motorcyclists to keep a few Ziploc baggies with them for such uses. I use to ride with a regular Garmin GPS mounted on my bars (before Smart phone days) and a Ziploc baggy saved it many times...and still let me use it at the same time. They save wallets, phones, and anything electronic small enough to fit in them.
my Galaxy Note 3
Im super bummed. I dropped mine in the toilet about 6 hours ago. I was half asleep so all I did was put it in rice. I started googling and saw to turn it off an take the battery out. I just tried to turn it on and all it does is pulsate. I have a bad feeling I ruined my phone......and no insurance

Only download mode after water

Please help me guys! My S8 felt in crystal clear water for only ~5 seconds today ( It never had any issues) and after that the screen was black but music was still playing, I turned it off with Vol Keys and after that nothing worked for nearly 2 hours. After that Download Modus popped up und nothing else Works. Im on vacation right now and I dont know what to do. I can try to Flash the Software but I dont want to pay anything or go to a Samsung Store. It cant be that it wont work right now. Firmware is already downloading but apart from that I cant to anything. Please help me
LDI is also not activated
halloo13 said:
Please help me guys! My S8 felt in crystal clear water for only ~5 seconds today ( It never had any issues) and after that the screen was black but music was still playing, I turned it off with Vol Keys and after that nothing worked for nearly 2 hours. After that Download Modus popped up und nothing else Works. Im on vacation right now and I dont know what to do. I can try to Flash the Software but I dont want to pay anything or go to a Samsung Store. It cant be that it wont work right now. Firmware is already downloading but apart from that I cant to anything. Please help me
LDI is also not activated
Click to expand...
Click to collapse
if its only booting to DL mode after water theirs no software flashing gonna fix that
Something must have shorted out and defaulting there only options would be try letting it dry out for days and see what happens or repair center
TheMadScientist said:
if its only booting to DL mode after water theirs no software flashing gonna fix that
Something must have shorted out and defaulting there only options would be try letting it dry out for days and see what happens or repair center
Click to expand...
Click to collapse
Thanks so much for helping. I am on vacation right now for 6 days. I will leave the device to dry out, it is still wet when I plug in anything. Thankfully, I have my S6 edge here too
halloo13 said:
Thanks so much for helping. I am on vacation right now for 6 days. I will leave the device to dry out, it is still wet when I plug in anything. Thankfully, I have my S6 edge here too
Click to expand...
Click to collapse
do not plug it in or anything that can cause shorts even more i would bag it in rice or moisture absorbing paper or something
TheMadScientist said:
do not plug it in or anything that can cause shorts even more i would bag it in rice or moisture absorbing paper or something
Click to expand...
Click to collapse
It's hard to find Rice in a Hotel but I will ask tommorow. I wont plug it in, I just wanted to see if the port is wet. Again, thanks so much for helping me so quick if this really works.. you'll be my hero
halloo13 said:
It's hard to find Rice in a Hotel but I will ask tommorow. I wont plug it in, I just wanted to see if the port is wet. Again, thanks so much for helping me so quick if this really works.. you'll be my hero
Click to expand...
Click to collapse
I dont expect it to But you never know
its not the water that damages the device its the impurities in the water that conduct the real electricity,
Water by itself sucks as a conductor
Normally I would also say pull the battery but kinda hard samsung.Thank you thank you
But as little voltage as possible til dried,
But yea I dont think flashing anything is the route right now I mean in some far off land in magical odds say the water hit the exact point of qualcoms ground out test points...
Might be able to also ask the staff at the hotel for instant mashed potatoes
Back when I worked on a wrecker I watched EMS use it for coagulant agents To stop bleeding and fluids as it is so dry it absorbs any to all moisture...Maybe a bag of that would even be better
TheMadScientist said:
I dont expect it to But you never know
its not the water that damages the device its the impurities in the water that conduct the real electricity,
Water by itself sucks as a conductor
Normally I would also say pull the battery but kinda hard samsung.Thank you thank you
But as little voltage as possible til dried,
But yea I dont think flashing anything is the route right now I mean in some far off land in magical odds say the water hit the exact point of qualcoms ground out test points...
Might be able to also ask the staff at the hotel for instant mashed potatoes
Back when I worked on a wrecker I watched EMS use it for coagulant agents To stop bleeding and fluids as it is so dry it absorbs any to all moisture...Maybe a bag of that would even be better
Click to expand...
Click to collapse
I checked again today and still nothing works.. I will ask now if they have rice

Categories

Resources