Database Users

[Q] Grand Prime boot problem

I have Galaxy Grand prime duos stuck at booting animation
I try to enter recovery mode (press and hold the Volume Up, Home and Power buttons together till Samsung logo flash twice then leave Power button) but it keeps restarting and i can't reach recovery mode
any help plz

No one answered me
my mobile still dying :crying:

I think u have to press volume - instead of volume +..
if still it don't open.
Try to flash a new rom from download mode..

Your rom get corrupted you been to flash a New rom trought odin and download Mode in the device

Fixing
Hello ..
*Your current firmware is looks to be damaged or corrupted
*You need to flash the official Firmware again using ODIN software
------------------------------------------------------------------------------------
*Download the latest Compatible ODIN Version With Galaxy Grand Prime
---> goo.gl/cjglQW
*Download the latest Firmware available for the Galaxy Grand Prime [25/1/2015]
---> goo.gl/Vq8dvt
-------------------------------------------------------------------------------------
*Download Both files ..
*Run ODIN
*Put your device into the Download mode (Power+Home+Volume Down)
*Flash your new Firmware
*Wait ..! Done !
*Enjoy

check url
louis0 said:
I have Galaxy Grand prime duos stuck at booting animation
I try to enter recovery mode (press and hold the Volume Up, Home and Power buttons together till Samsung logo flash twice then leave Power button) but it keeps restarting and i can't reach recovery mode
any help plz
Click to expand...
Click to collapse
AmGaD-SaLaH said:
Hello ..
*Your current firmware is looks to be damaged or corrupted
*You need to flash the official Firmware again using ODIN software
------------------------------------------------------------------------------------
*Download the latest Compatible ODIN Version With Galaxy Grand Prime
---> goo.gl/cjglQW
*Download the latest Firmware available for the Galaxy Grand Prime [25/1/2015]
---> goo.gl/Vq8dvt
-------------------------------------------------------------------------------------
*Download Both files ..
*Run ODIN
*Put your device into the Download mode (Power+Home+Volume Down)
*Flash your new Firmware
*Wait ..! Done !
please check URL website
Click to expand...
Click to collapse

kindly give again the website of the firmware.. thankyou

Look at my grand prime original developers where I show to flash and from where to downloads firmware

You'd better download a firmware backup of your Handheld and install Odin in your PC in case there's something wrong happens in your device.
Sent from my SM-G530H using XDA Free mobile app

i have hold the power botton and home botton but it only boot to factory mode please help me

nelvicv3 said:
i have hold the power botton and home botton but it only boot to factory mode please help me
Click to expand...
Click to collapse
Home, Volume Down and Power buttons.

Abd El -Rahman Alswaf said:
AmGaD-SaLaH said:
Hello ..
*Your current firmware is looks to be damaged or corrupted
*You need to flash the official Firmware again using ODIN software
------------------------------------------------------------------------------------
*Download the latest Compatible ODIN Version With Galaxy Grand Prime
---> goo.gl/cjglQW
*Download the latest Firmware available for the Galaxy Grand Prime [25/1/2015]
---> goo.gl/Vq8dvt
-------------------------------------------------------------------------------------
*Download Both files ..
*Run ODIN
*Put your device into the Download mode (Power+Home+Volume Down)
*Flash your new Firmware
*Wait ..! Done !
please check URL website
Click to expand...
Click to collapse
Go here http://www.sammobile.com/firmwares/
Make account and search your model number ie; sm-g531h
Click to expand...
Click to collapse

grand prime 4g
nelvicv3 said:
i have hold the power botton and home botton but it only boot to factory mode please help me[/QUO
check once by changing touch display...or remove touch connector from display and try on.....
Click to expand...
Click to collapse

EXACTLY!!!!!
louis0 said:
I have Galaxy Grand prime duos stuck at booting animation
I try to enter recovery mode (press and hold the Volume Up, Home and Power buttons together till Samsung logo flash twice then leave Power button) but it keeps restarting and i can't reach recovery mode
any help plz
Click to expand...
Click to collapse
Yes bro i am facing same problem i cant reach my bootloader option. plz help us guyz

Devansh11 said:
Yes bro i am facing same problem i cant reach my bootloader option. plz help us guyz
Click to expand...
Click to collapse
Try to enter download mode. HOME+VOLUME DOWN + POWER
Also when entering either recovery or download mode I find it helps to hold HOME+VOLUME UP and then press POWER.
If you can enter download mode but not recovery maybe your recovery is corrupt, reflash your firmware using ODIN

Well that literally happened to me and I fixed it by installing a custom recovery but its cuz of installing a wrong root version for android. U can flash a custom recovery and tell us.

ty bro
u0aol said:
Home, Volume Down and Power buttons.
Click to expand...
Click to collapse
CAN u plz tell how to reinstall flash

Devansh11 said:
CAN u plz tell how to reinstall flash
Click to expand...
Click to collapse
www.sammobile.com/tag/galaxy-grand-prime - Download the correct firmware for your device.
Ensure all of the Samsung USB drivers have been installed on your computer.
Place your phone into download mode (Home+Volume Down+ Power)
Open ODIN on your computer (Version 3.10 works best for the Grand Prime, but the newest version would be optimal)
Plug your USB cable into your cellphone and into your computer.
ODIN will say *ADDED* in its text output.
Press AP or PDA (Depending on ODIN version)
Select your downloaded firmware packet (It is either a .md5 file or a .md5.tar)
Press start and ODIN will automatically flash your firmware for you.
ODIN will say *SUCCESS* if completed and will automatically restart your phone.
Wait until your phone boots.
That is how you flash firmware using ODIN. I hope it helps.
Please in future search these forums as there are a hundred different tutorials on flashing.
:good::good:
---------- Post added at 04:46 AM ---------- Previous post was at 04:36 AM ----------
Honex98 said:
Well that literally happened to me and I fixed it by installing a custom recovery but its cuz of installing a wrong root version for android. U can flash a custom recovery and tell us.
Click to expand...
Click to collapse
Corrupting your recovery is NOT an issue that would happen because of a bad flash of root files.
Flashing a custom recovery such as TWRP will NOT solve issues with root or any issues caused by flashing the wrong root file.
Firmware corruption caused by flashing an incorrect root file is only fixable by reflashing your firmware and starting from the begining, custom recovery has nothing to do with that.
TWRP makes it easier to fix the issue, but it is not itself a fix for the issue.

hi i am using grand prime galaxy . but i got some text with blue and red it shows muticore odin mode etc

i am not able to enter recovery mode of smG530h
i can enter recovery mode of my smg 530h dous it just reboot and also dont show anything after rebooting black screen appears it is going in download mode pls help me :crying::crying::crying::crying:

Nervous about rooting samsung s5

Hi guys,
This is my first post on xda, i want to root my samsung s5 but after doing alot of research i understand that there is a high risk that my device can be bricked. In order to root my device i know i have:
1. drag and drop --------------------------------------------------------download.chainfire.eu/693/SuperSU/BETA-SuperSU-v2.44.zip into my device
2. download and install odin ----------------------------------------odin3.en.lo4d.com/[/url]
3.enable usb debugging
4. volume power and menu button to gain recovery mode
5.run odin and select AP then browser for TWRP FILE
6. Twrp file downloaded from here -------------------------------techerrata.com/browse/twrp2/klte
once install boot into recovery once again and load twrp then select to install supersu
this is the process that i am aware of but in respect i am nervous to brick my device, can anyone provide additional information or advice?
Regards

dexter_17 said:
Hi guys,
This is my first post on xda, i want to root my samsung s5 but after doing alot of research i understand that there is a high risk that my device can be bricked. In order to root my device i know i have:
1. drag and drop --------------------------------------------------------download.chainfire.eu/693/SuperSU/BETA-SuperSU-v2.44.zip into my device
2. download and install odin ----------------------------------------odin3.en.lo4d.com/[/url]
3.enable usb debugging
4. volume power and menu button to gain recovery mode
5.run odin and select AP then browser for TWRP FILE
6. Twrp file downloaded from here -------------------------------techerrata.com/browse/twrp2/klte
once install boot into recovery once again and load twrp then select to install supersu
this is the process that i am aware of but in respect i am nervous to brick my device, can anyone provide additional information or advice?
Regards
Click to expand...
Click to collapse
Which model u have?

Model number is : sm-g900f
android version : 6.0.1

anyone?

I flashed this http://forum.xda-developers.com/showthread.php?t=2696537. Gained Root, flashed a Custom Rom then flashed TWRP Img through recovery. Worked for me.
Sent from my SM-G900F using XDA-Developers mobile app

Issue regarding flash twrp recovery

I`m not able to flash twrp recovery in my phone Odin pass flashing process but phone wont boot in twrp recovery please help

Salmaster007 said:
I`m not able to flash twrp recovery in my phone Odin pass flashing process but phone wont boot in twrp recovery please help
Click to expand...
Click to collapse
See atfirst check that twrp is for ur android version or not.means there is different twrp available for different version.else mention ur model no i ll give u that link.before that in development mode unlock the oem.else it will show custom binary by frp lock.then flash the recovery twrp via odin 12.3 for mm or odin 10.6 for lollipop.enjoy

aslam4580 said:
See atfirst check that twrp is for ur android version or not.means there is different twrp available for different version.else mention ur model no i ll give u that link.before that in development mode unlock the oem.else it will show custom binary by frp lock.then flash the recovery twrp via odin 12.3 for mm or odin 10.6 for lollipop.enjoy
Click to expand...
Click to collapse
developer option is enable
OEM unlock is enable
USB debugging is enable
Model no. is SM-J500F.Device is currently running on marshmallow 6.0.1
please help

Salmaster007 said:
developer option is enable
OEM unlock is enable
USB debugging is enable
Model no. is SM-J500F.Device is currently running on marshmallow 6.0.1
please help
Click to expand...
Click to collapse
Ok bro.as ur information,here i have attached both odin and recovery twrp for ur mobile.just download both file and copy to ur pc.then extract odin and run as adminstrator.in ap select that recovery file afterwards put ur mobile in download mode and start.afterwards it will reboot then again turnoff ur phone and press (power off+middle button+volume up) button together.
Then u ll get twrp...nd enjoy bro
Download link for recovery:https://mega.nz/#!MkMlXS7Q!KoTmoNDKE_Ok1T2sEG4GA-1SBJXsnz6y1zV2iRTLbZk
Download link for odin:https://mega.nz/#!sxkXRSaJ!eP9mI8y4Z9Mxqu2cKLm4vjQ1PcoXE_iyq7eiKQtuUlg
Its for 2015 j500f mm version and i have checked both file is working fine.

aslam4580 said:
Ok bro.as ur information,here i have attached both odin and recovery twrp for ur mobile.just download both file and copy to ur pc.then extract odin and run as adminstrator.in ap select that recovery file afterwards put ur mobile in download mode and start.afterwards it will reboot then again turnoff ur phone and press (power off+middle button+volume up) button together.
Then u ll get twrp...nd enjoy bro
Download link for recovery:https://mega.nz/#!MkMlXS7Q!KoTmoNDKE_Ok1T2sEG4GA-1SBJXsnz6y1zV2iRTLbZk
Download link for odin:https://mega.nz/#!sxkXRSaJ!eP9mI8y4Z9Mxqu2cKLm4vjQ1PcoXE_iyq7eiKQtuUlg
Its for 2015 j500f mm version and i have checked both file is working fine.
Click to expand...
Click to collapse
Still Im facing same issue

Which recovery are you using ? The one from Nick Verse won't work with the secure bootloader of the latest Mashmallow updates , when I tried i could not boot into recovery using that one ...
The one from this thread is working perfectly for me at the moment :
http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960

Try the twrp made by ganesh varma.

1-in odin Untick Auto reboot option.
2-After flushing twrp by Odin, remove the battery and insert it again .
3- press volume up+ home+power button to go to twrt.
4- install supersu.zip
I had this issue on j5h but after doing that i could root my phone.

Thanks Guys for your help..

ok how to install twrp anyone ?

Hello guys well i am struggling to install twrp after updating from lollipop but when i do it nothing happens i need help i have j500fn mm

By Odin Method On PC

AndroidTutorials said:
Hello guys well i am struggling to install twrp after updating from lollipop but when i do it nothing happens i need help i have j500fn mm
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960
above is the thread link for j5 MM twrp by Ganesh varma.
follow these steps:
1.Download and install Odin,usb drivers.
2.Power off the device and boot into download mode by holding [VOLUME DOWN/HOME & POWER].
3.A Warning screen appears,now press volume up once and connect the phone to the PC.
4.Open Odin with admin rights and you should see the phone added at some ID COM: port if not then you have to download and install the appropriate drivers.
5.Now click on AP and select the downloaded recovery file.
6.UNcheck the ''autostart'' options in odin >> VERY IMPORTANT<<
7.Hit start and the flashing will be done in a few seconds and the device reboots.
8.Hold VOLUME UP+POWER+HOME buttons to boot into recovery.
Enjoy!!
CHECK THE VIDEO FROM BELOW LINK IF STILL HAVE PROBLEMS.
https://youtu.be/z-8CZdwla-A

androfan86 said:
http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960
above is the thread link for j5 MM twrp by Ganesh varma.
follow these steps:
1.Download and install Odin,usb drivers.
2.Power off the device and boot into download mode by holding [VOLUME DOWN/HOME & POWER].
3.A Warning screen appears,now press volume up once and connect the phone to the PC.
4.Open Odin with admin rights and you should see the phone added at some ID COM: port if not then you have to download and install the appropriate drivers.
5.Now click on AP and select the downloaded recovery file.
6.UNcheck the ''autostart'' options in odin >> VERY IMPORTANT<<
7.Hit start and the flashing will be done in a few seconds and the device reboots.
8.Hold VOLUME UP+POWER+HOME buttons to boot into recovery.
Enjoy!!
CHECK THE VIDEO FROM BELOW LINK IF STILL HAVE PROBLEMS.
Click to expand...
Click to collapse
Ive tried that but device says custom and no recovery

AndroidTutorials said:
Ive tried that but device says custom and no recovery
Click to expand...
Click to collapse
Hmm.. nowadays some of the Marshmallow version are coming with locked bootloader.. may be because of that u are getting error.
In such case you need to flash each and every version of marshmallow Firmware and check whether it supports flashing twrp or not from the below link. If you are able to flash twrp or certain frimware, that means its bootloader is not locked.
https://www.sammobile.com/firmwares/database/SM-J500FN/
or simply try this firmware from below link:
https://www.sammobile.com/firmwares/download/113125/J500FNXXU1BPK3_J500FNOXA1BPK3_PHE/
Dont forget to make ''on'' oem unlock and usb debugging from developer option.

This is perfect root tutorial in few minutes and everyone says it works

Ok so I think it's because it's a bug I put lollipop on and now it's all done their must be something wrong unless I have to flash marhmellow first ☺

(Potential) Root for Samsung J330L (Korean variant)

This is a guide to an untested yet possible method of rooting the Samsung J330L
So far I have been able to install Clockwork mod successfully and wanted to share my findings.
(links at the end of page)
NOTE: I take no credit for creating/editing the files listed below
*IF you follow this guide you may void your warranty*
*I am not responsible or liable for any damages while following or attempting to follow this guide*
The Korean variant of the J3 is relatively easy to install CWM.
You first must install, as with any Samsung device, Odin.
You should be able to download the latest Odin from there web page below
Secondly you need a 2017 firmware set for the j330L both to do the installation and to flash if anything goes wrong.
After installing Odin and extracting the .tar files you will need to put you phone in download mode by pressing and holding the home vol- and power keys
when you get a blue screen hit vol+. You should be in download mode.
Connect your phone to your computer and open Odin. You will need to install the BL AP CP and CSC files. (For the CSC file use the HOME file)
reboot and boot back into download mode
Flash the recovery.tar in the AP slot.
Reboot to recovery by holding down Home power and vol+
----Past this point i have had no success flashing magisk or super SU so I am currently working on flashing a ROM for root(causes boot loop)
---------------------------------------------Suggestions and help is welcome----------------------------------------------------------------
Odin: (https://odindownload.com)
Firmware: (https://www.theandroidsoul.com/samsung-galaxy-j3-firmware)
CWM: (https://forum.xda-developers.com/galaxy-j3-2017/how-to/cwm-recovery-sm-j330f-t3674449)

zen_hakuren said:
This is a guide to an untested yet possible method of rooting the Samsung J330L
So far I have been able to install Clockwork mod successfully and wanted to share my findings.
(links at the end of page)
NOTE: I take no credit for creating/editing the files listed below
*IF you follow this guide you may void your warranty*
*I am not responsible or liable for any damages while following or attempting to follow this guide*
The Korean variant of the J3 is relatively easy to install CWM.
You first must install, as with any Samsung device, Odin.
You should be able to download the latest Odin from there web page below
Secondly you need a 2017 firmware set for the j330L both to do the installation and to flash if anything goes wrong.
After installing Odin and extracting the .tar files you will need to put you phone in download mode by pressing and holding the home vol- and power keys
when you get a blue screen hit vol+. You should be in download mode.
Connect your phone to your computer and open Odin. You will need to install the BL AP CP and CSC files. (For the CSC file use the HOME file)
reboot and boot back into download mode
Flash the recovery.tar in the AP slot.
Reboot to recovery by holding down Home power and vol+
----Past this point i have had no success flashing magisk or super SU so I am currently working on flashing a ROM for root(causes boot loop)
---------------------------------------------Suggestions and help is welcome----------------------------------------------------------------
Odin: (https://odindownload.com)
Firmware: (https://www.theandroidsoul.com/samsung-galaxy-j3-firmware)
CWM: (https://forum.xda-developers.com/galaxy-j3-2017/how-to/cwm-recovery-sm-j330f-t3674449)
Click to expand...
Click to collapse
CWM is dead.
Your device should be able to rooted using TWRP or use Magisk manager to root the boot image.
https://forum.xda-developers.com/ga...overy-twrp-3-1-1-1-samsung-galaxy-j3-t3709056

True but at the time of posting TWRP causes boot loop. I haven't tried the TWRP version that you posted tho. I will give it a shot.

Ok After much testing i have successfully rooted the damn thing with the twrp installation above and the latest Super User but installing magisk or installing a custom rom now causes bootloop. This damned phone is irritating AF but root does work.... now i need to find out how remove my kernel so i can base a rom off it