Database Users

stock kernel on S6 edge+?

hey guys, i just tryed to install a rooted kernel on my s6 edge s6+ (g928f) and now it just says "kernel is not seandroid secure" what to do? i have tryed different kernels... and it wont start at all do you guys have an idea of what to to? its all stock firmware, no CWM or anything installed

you make a nandroid backup bevor?

Same problem
Verstuurd van mijn SM-G928F met xda-developers.com, mogelijk gemaakt door appyet.com

Same problem x2

In a other post some one tell me how to fix it , and it works for mee my sm g928f is rooted later today i will post it in this threat

Originally Posted by agantal864
Note: i am not responsible for any damage taken using this method just follow the instruction properly and you will not have any problems
Your phones version should be marshmallow 6.0.1 dont use this if your version is lollipop
Prerequisites:
Odin,Twrp,samsung usb drivers,supersu beta by chainfire,a computer and usb cable
Links for download is below
Procedures:
1.install samsung usb drivers to your computer
2.copy twrp file to your computer in desktop(if its extension is .zip then extract it, then if its .img then leave it)
3.copy odin file to your pc in desktop and extract it
4.copy supersu file to your internal memory, be sure to memorize where you put the file
5.open odin.exe file in desktop, go to option, untick auto reboot,and leave everything else.
6.from your phone go to developer options, (to go there click build number many times) now find oem unlocking and enable it .. (Just to be sure remove google account and screen lock to avoid frp lock)
7.power off your phone and go to download mode(to go there,hold power button,volume down button,and home button simultaneously, and press volume up to enter dl mode)
8.plug your phone to pc (be sure you followed step 4 or else you may get dm verification) just follow everything else correctly and your good to go
9.now go to odin and click AP button,a file explorer will appear and find the twrp file and select it and then click start
10.you will see the message in odin PASS
11.this is important step.... Now click all the button of your phone, as soon as it gets out to download mode quickly unpress volume down leaving only power,home,volume up button
12 keep pressing those 3 buttons until you will see red message in upper left but just ignore it and keep pressing the button
13 and now twrp will be open and it will say allow modification? Be sure supersu file is already stored in your phone storage to apply patch
Now swipe right to allow
14. Now go to the box saying install and find your supersu file and select and install it(swipe right to install)
15.Super su file will be installed and patch will be applied and after it is done, click reboot system..
Now your phone will reboot and wait
You now have root access and custom recovery installed , to check root, download supersu in play store and root checker,
Download link:
ODIN link: http://uploaded.net/file/6xtojk1o
TWRP link: https://dl.twrp.me/noblelte/twrp-3.0...eltezt.img.tar
supersu: https://download.chainfire.eu/924/Su...0228150503.zip
USB drivers link: http://developer.samsung.com/technic...o?v=T000000117
REFERENCE: http://www.androidsis.com/recovery-r...-s6-edge-plus/
THIS one works for me

root zte v6 plus?

Anyone know if there is root for ZTE Blade v6 Plus, thank you.

Anyone? I Tried kingroot didnt work

checho5123 said:
Anyone? I Tried kingroot didnt work
Click to expand...
Click to collapse
same here tried with several rooting apps still nothing

I get something
First activate the debbug usb and the bootloader, get a custom recovery (twrp for ZTE blade v7 lite), and flash with sp flash tool, activate the usb debbug and bootloader, then having the beta supersu install it since twrp. The files you use are the same as the ZTE BLADE V7 Lite as they have the same SOC MT6735 and andriod 6.0 ... look for them in google
I regret to say that the operation is successful but the device continues with the same stock recovery.
Try it and tell me if it works for you.

Zaidlion said:
First activate the debbug usb and the bootloader, get a custom recovery (twrp for ZTE blade v7 lite), and flash with sp flash tool, activate the usb debbug and bootloader, then having the beta supersu install it since twrp. The files you use are the same as the ZTE BLADE V7 Lite as they have the same SOC MT6735 and andriod 6.0 ... look for them in google
I regret to say that the operation is successful but the device continues with the same stock recovery.
Try it and tell me if it works for you.
Click to expand...
Click to collapse
but you were able to get rooted on account of this?

Smashhead85 said:
but you were able to get rooted on account of this?
Click to expand...
Click to collapse
I already did root zte blade v6 plus, the process is very simple only the most recent spflash tool is needed, that you have MTK drivers well installed, I have recovery and supersu v2.78. At first I put the stock recovery but I would flash it but just change pc and I went back to do the process and it worked.
I do not know, can I link here? Or how can I help you?

Zaidlion said:
I already did root zte blade v6 plus, the process is very simple only the most recent spflash tool is needed, that you have MTK drivers well installed, I have recovery and supersu v2.78. At first I put the stock recovery but I would flash it but just change pc and I went back to do the process and it worked.
I do not know, can I link here? Or how can I help you?
Click to expand...
Click to collapse
For sure a link or two would be appreciated...bcuz i have not been able to root my zte v6 plus

Smashhead85 said:
For sure a link or two would be appreciated...bcuz i have not been able to root my zte v6 plus
Click to expand...
Click to collapse
On some devices the root can not be installed, because they have blocked the flash but I am seeing how to modify this and so share it with you.
1.- activate usb debugging
2.-put the supersu file in the root of sd or internal memory
2.- install mtk DRIVERS on your pc
4.-Unzip the rar file on your desktop
3.-open spflashtool and select scatter-loading, load the file MT6735P_Android_scatter.txt
4.-turn off your device, and do not connect ...
5.-In spflashtool press the DOWNLOAD button, then connect your device and do not disconnect until a green thing appears ..
6.-When the green thing appears, disconnect the cable and press the UP VOLUME button + POWER button, you will see in the lower left a few letters that you say Recovery Mode, you have to appear the TWRP recovery, if you have the stock Recovery means that your device has write protection, but if it appears you proceed to install the supersu that is very easy you can check some video on YouTube how to install it using the TWRP.
Nota,: how do i pass the files???

Zaidlion said:
On some devices the root can not be installed, because they have blocked the flash but I am seeing how to modify this and so share it with you.
1.- activate usb debugging
2.-put the supersu file in the root of sd or internal memory
2.- install mtk DRIVERS on your pc
4.-Unzip the rar file on your desktop
3.-open spflashtool and select scatter-loading, load the file MT6735P_Android_scatter.txt
4.-turn off your device, and do not connect ...
5.-In spflashtool press the DOWNLOAD button, then connect your device and do not disconnect until a green thing appears ..
6.-When the green thing appears, disconnect the cable and press the UP VOLUME button + POWER button, you will see in the lower left a few letters that you say Recovery Mode, you have to appear the TWRP recovery, if you have the stock Recovery means that your device has write protection, but if it appears you proceed to install the supersu that is very easy you can check some video on YouTube how to install it using the TWRP.
Nota,: how do i pass the files???
Click to expand...
Click to collapse
thank you it was successful and i searched Youtube and everybody seems to be using this method although the videos are in spanish
also for those wishing to follow suit
splflashtool,scatter, recovery TWRP: http://*******/1iawZh
SuperSU.zip: http://*******/1iax2p
credits to Noomkrad or whoever they belong to

Issue regarding flash twrp recovery

I`m not able to flash twrp recovery in my phone Odin pass flashing process but phone wont boot in twrp recovery please help

Salmaster007 said:
I`m not able to flash twrp recovery in my phone Odin pass flashing process but phone wont boot in twrp recovery please help
Click to expand...
Click to collapse
See atfirst check that twrp is for ur android version or not.means there is different twrp available for different version.else mention ur model no i ll give u that link.before that in development mode unlock the oem.else it will show custom binary by frp lock.then flash the recovery twrp via odin 12.3 for mm or odin 10.6 for lollipop.enjoy

aslam4580 said:
See atfirst check that twrp is for ur android version or not.means there is different twrp available for different version.else mention ur model no i ll give u that link.before that in development mode unlock the oem.else it will show custom binary by frp lock.then flash the recovery twrp via odin 12.3 for mm or odin 10.6 for lollipop.enjoy
Click to expand...
Click to collapse
developer option is enable
OEM unlock is enable
USB debugging is enable
Model no. is SM-J500F.Device is currently running on marshmallow 6.0.1
please help

Salmaster007 said:
developer option is enable
OEM unlock is enable
USB debugging is enable
Model no. is SM-J500F.Device is currently running on marshmallow 6.0.1
please help
Click to expand...
Click to collapse
Ok bro.as ur information,here i have attached both odin and recovery twrp for ur mobile.just download both file and copy to ur pc.then extract odin and run as adminstrator.in ap select that recovery file afterwards put ur mobile in download mode and start.afterwards it will reboot then again turnoff ur phone and press (power off+middle button+volume up) button together.
Then u ll get twrp...nd enjoy bro
Download link for recovery:https://mega.nz/#!MkMlXS7Q!KoTmoNDKE_Ok1T2sEG4GA-1SBJXsnz6y1zV2iRTLbZk
Download link for odin:https://mega.nz/#!sxkXRSaJ!eP9mI8y4Z9Mxqu2cKLm4vjQ1PcoXE_iyq7eiKQtuUlg
Its for 2015 j500f mm version and i have checked both file is working fine.

aslam4580 said:
Ok bro.as ur information,here i have attached both odin and recovery twrp for ur mobile.just download both file and copy to ur pc.then extract odin and run as adminstrator.in ap select that recovery file afterwards put ur mobile in download mode and start.afterwards it will reboot then again turnoff ur phone and press (power off+middle button+volume up) button together.
Then u ll get twrp...nd enjoy bro
Download link for recovery:https://mega.nz/#!MkMlXS7Q!KoTmoNDKE_Ok1T2sEG4GA-1SBJXsnz6y1zV2iRTLbZk
Download link for odin:https://mega.nz/#!sxkXRSaJ!eP9mI8y4Z9Mxqu2cKLm4vjQ1PcoXE_iyq7eiKQtuUlg
Its for 2015 j500f mm version and i have checked both file is working fine.
Click to expand...
Click to collapse
Still Im facing same issue

Which recovery are you using ? The one from Nick Verse won't work with the secure bootloader of the latest Mashmallow updates , when I tried i could not boot into recovery using that one ...
The one from this thread is working perfectly for me at the moment :
http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960

Try the twrp made by ganesh varma.

1-in odin Untick Auto reboot option.
2-After flushing twrp by Odin, remove the battery and insert it again .
3- press volume up+ home+power button to go to twrt.
4- install supersu.zip
I had this issue on j5h but after doing that i could root my phone.

Thanks Guys for your help..

ok how to install twrp anyone ?

Hello guys well i am struggling to install twrp after updating from lollipop but when i do it nothing happens i need help i have j500fn mm

By Odin Method On PC

AndroidTutorials said:
Hello guys well i am struggling to install twrp after updating from lollipop but when i do it nothing happens i need help i have j500fn mm
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960
above is the thread link for j5 MM twrp by Ganesh varma.
follow these steps:
1.Download and install Odin,usb drivers.
2.Power off the device and boot into download mode by holding [VOLUME DOWN/HOME & POWER].
3.A Warning screen appears,now press volume up once and connect the phone to the PC.
4.Open Odin with admin rights and you should see the phone added at some ID COM: port if not then you have to download and install the appropriate drivers.
5.Now click on AP and select the downloaded recovery file.
6.UNcheck the ''autostart'' options in odin >> VERY IMPORTANT<<
7.Hit start and the flashing will be done in a few seconds and the device reboots.
8.Hold VOLUME UP+POWER+HOME buttons to boot into recovery.
Enjoy!!
CHECK THE VIDEO FROM BELOW LINK IF STILL HAVE PROBLEMS.
https://youtu.be/z-8CZdwla-A

androfan86 said:
http://forum.xda-developers.com/galaxy-j5/development/recovery-samsung-galaxy-j500f-t3416960
above is the thread link for j5 MM twrp by Ganesh varma.
follow these steps:
1.Download and install Odin,usb drivers.
2.Power off the device and boot into download mode by holding [VOLUME DOWN/HOME & POWER].
3.A Warning screen appears,now press volume up once and connect the phone to the PC.
4.Open Odin with admin rights and you should see the phone added at some ID COM: port if not then you have to download and install the appropriate drivers.
5.Now click on AP and select the downloaded recovery file.
6.UNcheck the ''autostart'' options in odin >> VERY IMPORTANT<<
7.Hit start and the flashing will be done in a few seconds and the device reboots.
8.Hold VOLUME UP+POWER+HOME buttons to boot into recovery.
Enjoy!!
CHECK THE VIDEO FROM BELOW LINK IF STILL HAVE PROBLEMS.
Click to expand...
Click to collapse
Ive tried that but device says custom and no recovery

AndroidTutorials said:
Ive tried that but device says custom and no recovery
Click to expand...
Click to collapse
Hmm.. nowadays some of the Marshmallow version are coming with locked bootloader.. may be because of that u are getting error.
In such case you need to flash each and every version of marshmallow Firmware and check whether it supports flashing twrp or not from the below link. If you are able to flash twrp or certain frimware, that means its bootloader is not locked.
https://www.sammobile.com/firmwares/database/SM-J500FN/
or simply try this firmware from below link:
https://www.sammobile.com/firmwares/download/113125/J500FNXXU1BPK3_J500FNOXA1BPK3_PHE/
Dont forget to make ''on'' oem unlock and usb debugging from developer option.

This is perfect root tutorial in few minutes and everyone says it works

Ok so I think it's because it's a bug I put lollipop on and now it's all done their must be something wrong unless I have to flash marhmellow first ☺

(Potential) Root for Samsung J330L (Korean variant)

This is a guide to an untested yet possible method of rooting the Samsung J330L
So far I have been able to install Clockwork mod successfully and wanted to share my findings.
(links at the end of page)
NOTE: I take no credit for creating/editing the files listed below
*IF you follow this guide you may void your warranty*
*I am not responsible or liable for any damages while following or attempting to follow this guide*
The Korean variant of the J3 is relatively easy to install CWM.
You first must install, as with any Samsung device, Odin.
You should be able to download the latest Odin from there web page below
Secondly you need a 2017 firmware set for the j330L both to do the installation and to flash if anything goes wrong.
After installing Odin and extracting the .tar files you will need to put you phone in download mode by pressing and holding the home vol- and power keys
when you get a blue screen hit vol+. You should be in download mode.
Connect your phone to your computer and open Odin. You will need to install the BL AP CP and CSC files. (For the CSC file use the HOME file)
reboot and boot back into download mode
Flash the recovery.tar in the AP slot.
Reboot to recovery by holding down Home power and vol+
----Past this point i have had no success flashing magisk or super SU so I am currently working on flashing a ROM for root(causes boot loop)
---------------------------------------------Suggestions and help is welcome----------------------------------------------------------------
Odin: (https://odindownload.com)
Firmware: (https://www.theandroidsoul.com/samsung-galaxy-j3-firmware)
CWM: (https://forum.xda-developers.com/galaxy-j3-2017/how-to/cwm-recovery-sm-j330f-t3674449)

zen_hakuren said:
This is a guide to an untested yet possible method of rooting the Samsung J330L
So far I have been able to install Clockwork mod successfully and wanted to share my findings.
(links at the end of page)
NOTE: I take no credit for creating/editing the files listed below
*IF you follow this guide you may void your warranty*
*I am not responsible or liable for any damages while following or attempting to follow this guide*
The Korean variant of the J3 is relatively easy to install CWM.
You first must install, as with any Samsung device, Odin.
You should be able to download the latest Odin from there web page below
Secondly you need a 2017 firmware set for the j330L both to do the installation and to flash if anything goes wrong.
After installing Odin and extracting the .tar files you will need to put you phone in download mode by pressing and holding the home vol- and power keys
when you get a blue screen hit vol+. You should be in download mode.
Connect your phone to your computer and open Odin. You will need to install the BL AP CP and CSC files. (For the CSC file use the HOME file)
reboot and boot back into download mode
Flash the recovery.tar in the AP slot.
Reboot to recovery by holding down Home power and vol+
----Past this point i have had no success flashing magisk or super SU so I am currently working on flashing a ROM for root(causes boot loop)
---------------------------------------------Suggestions and help is welcome----------------------------------------------------------------
Odin: (https://odindownload.com)
Firmware: (https://www.theandroidsoul.com/samsung-galaxy-j3-firmware)
CWM: (https://forum.xda-developers.com/galaxy-j3-2017/how-to/cwm-recovery-sm-j330f-t3674449)
Click to expand...
Click to collapse
CWM is dead.
Your device should be able to rooted using TWRP or use Magisk manager to root the boot image.
https://forum.xda-developers.com/ga...overy-twrp-3-1-1-1-samsung-galaxy-j3-t3709056

True but at the time of posting TWRP causes boot loop. I haven't tried the TWRP version that you posted tho. I will give it a shot.

Ok After much testing i have successfully rooted the damn thing with the twrp installation above and the latest Super User but installing magisk or installing a custom rom now causes bootloop. This damned phone is irritating AF but root does work.... now i need to find out how remove my kernel so i can base a rom off it