well, i just flashed the DFHKT_U_4.5.2-109_DHT-22-23 over DEFYPLUS_U3_4.5.1-134_DFP-137, yes, i know, BIG MISTAKE, the DFP-137 was with other name when i flashed it for the first time, now the phone doesn't boot and charge, its practicably dead, what can i do?
Edit: sorry for the title, I tried to say, it does not load or boot.
Edit2:fixed, just had to turn it on like flash a new sbf, then connect to a pc and start flashing another one.
Uf...
Solution
Bleak3993 said:
well, i just flashed the DFHKT_U_4.5.2-109_DHT-22-23 over DEFYPLUS_U3_4.5.1-134_DFP-137, yes, i know, BIG MISTAKE, the DFP-137 was with other name when i flashed it for the first time, now the phone doesn't boot and charge, its practicably dead, what can i do?
Edit: sorry for the title, I tried to say, it does not load or boot.
Edit2:fixed, just had to turn it on like flash a new sbf, then connect to a pc and start flashing another one.
Uf...
Click to expand...
Click to collapse
Hello, I try to help, in this case you have to get a SFB / original Flash file your operator, hence try to turn the phone into bootloader mode (ON button while the volume button (Vol-+) to same time, hence the contectas to computer with RSD Lite and flash it so
WARNING
MUST BE WITH YOUR OPERATING SYSTEM OPERATOR MOBILE HOME AS PACKAGE CAME AS Failure to do so may become unusable PERMANENTLY (an example is putting on the SFB of another operator, or other model)
If you have questions contact me via Facebook, is in my profile page
If I helped you, give thanks
Please ask all questions in the Q&A section. Thread moved there.
Here's the story. I flash my phone and put the firmware in the wrong place. I put the firmware in the BL not in the AP. And now my phone can not enter download mode again and the screen so wierd. Please help me...??
ankouizanami said:
Here's the story. I flash my phone and put the firmware in the wrong place. I put the firmware in the BL not in the AP. And now my phone can not enter download mode again and the screen so wierd. Please help me...
Click to expand...
Click to collapse
Hay, @muniz_ri: Man could you please help me about the same like problem, I have brick my nieces Galaxy Grand Prime G530H, while i was trying to upgrade it to 5.0.2, I did all the things well and ODIN showed PASSED sign on the relevant bar, but the phone didn't boot thereafter,
It only has a light black screen, No download mode, no recovery mode, it starts (as it vibrates & the screen looks like it is not dead totally) and the computer also detects it.
I remember, i had alike problem with a LG G2 but, galaxy devices are quite changed. What can i do please, please help me.
you are a software Guru man and you have figured out many problems even without knowing what has been done with the devices, kindly help me and some others in the line, Please find out some thing. I have searched the xda and googled a lot but couldn't find any help. Thanks a lot.
Hi, i want to fix a phone of my friend by flashing it with odin, but things go wrong, the phone after failing wont start or respond to any button, i dont know what to do, please any help would be appreciated
Samsung Galaxy J1 SM-J100H
Edit:
Thanks xEmre66 for your reply, unfortunately no, i think i break the boot image, the phone wont boot on download mode even if i use 300k jig, i think the only solution is to use an sd card filled with the boot image, but i dont find in website a solution like that.
I tryed many solution but no one work, please if someone have the some problem tell me.
Can you get into the DownloadMode? (ODIN MODE)???
Sent from my SM-J100H using XDA-Developers mobile app
---------- Post added at 08:58 AM ---------- Previous post was at 08:57 AM ----------
I have this phone but it is not my main phone but maybe I can help you.
Sent from my SM-J100H using XDA-Developers mobile app
i'm working on this problem..
i resolved,
share there
OSKCHAST said:
i resolved,
share there
Click to expand...
Click to collapse
Please can you share the solution ?, i cant fix the phone.
same problem here
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???
caseres84 said:
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???
Click to expand...
Click to collapse
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.
xEmre66 said:
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.
Click to expand...
Click to collapse
same in here. I flash original rom from sam mobile site and my samsung sm-j100h is bricked now. i flash using odin and everthing was ok and it was pass. but nothing happend later on, screen remains black and I don't know what to do.
or atleast tell me can I get somehow all data stored on phone, if yes how to do it
guys still nothing???
same problem guys i bricked the phone 2 days ago with the original firmware from sam mobile u.u i put my samusung j1 in download mode and with odin i done the reflash odin it was green and said me passed but then when i tried to turn on the phone nothing happened my phone is died hard bricked is there a guys something to do to repair him?
i got the same problem..
the phone was completely DEAD after i followed all the instructions here => https://www.youtube.com/watch?v=1T9fxno2s68
Please somebody help us..
Here's my thread => http://forum.xda-developers.com/android/help/help-sm-j100h-dead-power-flash-t3511894
Thank you very much..
im using sm j110h and i too flashed orginal stock rom via odin but unfortunately i forget to put the batteries on and i fonud that after that i got pass message only now the screen remaines black and not getting to download mode and not switching on. does anyone help me on this problem hope will get a solution thanks in advance
Gal J1 of sadness.... but still hoping
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:
Chrisjopett said:
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:
Click to expand...
Click to collapse
PM me pls and tell me how you flashed it etc.
Help
I have same problem,hard brick.Can anyone help?
somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:
kkq29 said:
somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:
Click to expand...
Click to collapse
Can you get into Odin Mode? If yes, flash the stock firmware of your region (here is a fast server which provides very fast downloads: fw.updato.com) If no, then you should change your battery as you're saying "it came from my battery" and try the first step again.
If it doesn't help as expected, then your phone is hard bricked and can't be repaired at all. The only solution would be changing the motherboard, but I would not waste my money on a low-end device motherboard and I would directly buy a new phone. :/
Regards,
xEmre66
If I am correct...
Then SM-J110H have Spreadtrum SC7727S
Here is Pinout for Direct eMMC...
https://postimg.cc/image/ul680l5jv/
This Pinout seems also to work with:
Code:
SM-G318HZ
SM-Z130H
I have leaked SM-Z130H PDF... where Instruction is inside to repair with tweezer... USB cable + Spreadtrum Tool:
Code:
[B]ResearchDownload[/B]
In theory something similar should be possible with SM-J110H...
I have at the moment only 1 problem... to create PAC file...
No idea from where I can get:
Code:
FDL1
FDL2
Best Regards
Edit 1.
Sorry, seems I was drunken...
It is sooo hard to find Posts or Threads about SM-J110H...
But it seems SM-J100H also Spreadtrum device...
xEmre66 said:
PM me pls and tell me how you flashed it etc.
Click to expand...
Click to collapse
PM me too please
My teacher phone has a same problem, hehehe.
same problem here. my phone got stuck up with samsung logo then i just dowloaded a firmware on sammobile and i flash it via odin at first it passed then my phone did'nt turn on anymore.
J100H / DD Finding Deadboot solution
Hi ... guys me too having this sort of problem and i found bad about samsung using 32bit - Spreadtrum SC8830A EMMC chipset here
Fix solution Not Found still! if i done i will tell you!
on = SM-J100H/DD --- corp =samsung yateley, uk
ok friend iam searching for Solution for 3days bt i found none= with a clue
It is J100H on serial port= SPRD U2S Daig (ComXX) usb says= SPRD COM Emumerator
this means - all sprd flashing been done on this 2 port only - in Miracle Box it says -
Scanning USB Serial port...
SU2Serial Port: COM64
Connecting to Phone,Wait..
Done.
Infor: SPRD3
Initialize boot19...
>>BootLoad Error. ID: 1
so my option is if we build a sprdp.bin and flash in AP(PDA) it will boot to Download mode
and dont ask me where is that file i dont no - if any one can provide a real backup pit.pit file
via phone to me i can find something and let u know it. Only from a alive phone J100H/DD
plz friends i need help any dumps or pit. and if any one has a alive J100H/DD please tell me.!
so i can get some help from u --If you wish to help
Mod edit: Closed as duplicate of this post.
Oswald Boelcke
Senior Moderator
welcome
Sorry, I don't know English, but I translate from Google. I have a problem. I updated the screen and an error occurred. And because a black screen appears after the logo appears. I can not enter the recovery recovery. The computer refuses to recognize the screen. There is someone who said it must be a 6pin. How do I get the cable that holds the 6 pin. Or is there a way to revive?
Where can I get a USB pin?
Is there a link to the site to buy?
Can I do a recovery or a way for the computer to recognize the screen?
Hi All
I have a one plus 5 that all of a sudden wont turn on, stuck it on charge last night and then this morning will not boot
I can get it into fast boot mode but that is about as far as it goes, when I try and go to recovery mode the phone just shutsdown
Been searching the forum here and discovered some info about unbricking using MSMdownload tool in EDL mode, I have tried quite a few different drives and about 5 PCS's now all with the same result saying Sahara connection failed
I have also tried the ALL IN ONE TOOL to do the recovery flasher but bootloader is locked and wont allow it, I have not been able to find away to unlock it as everthing I have found says to unlock via the settings menu which obviously I cant get to as the phone wont boot
I was hoping just to extract some data from it at first but that is starting to look like it is not possible
if anyone has any tips that could help me out I would really appreciate it
Cheers
plnewton said:
Hi All
I have a one plus 5 that all of a sudden wont turn on, stuck it on charge last night and then this morning will not boot
I can get it into fast boot mode but that is about as far as it goes, when I try and go to recovery mode the phone just shutsdown
Been searching the forum here and discovered some info about unbricking using MSMdownload tool in EDL mode, I have tried quite a few different drives and about 5 PCS's now all with the same result saying Sahara connection failed
I have also tried the ALL IN ONE TOOL to do the recovery flasher but bootloader is locked and wont allow it, I have not been able to find away to unlock it as everthing I have found says to unlock via the settings menu which obviously I cant get to as the phone wont boot
I was hoping just to extract some data from it at first but that is starting to look like it is not possible
if anyone has any tips that could help me out I would really appreciate it
Cheers
Click to expand...
Click to collapse
@plnewton
Prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved the thread to Android Q&A as it didn't qualify for development.
Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator
plnewton said:
Hi All
I have a one plus 5 that all of a sudden wont turn on, stuck it on charge last night and then this morning will not boot
I can get it into fast boot mode but that is about as far as it goes, when I try and go to recovery mode the phone just shutsdown
Been searching the forum here and discovered some info about unbricking using MSMdownload tool in EDL mode, I have tried quite a few different drives and about 5 PCS's now all with the same result saying Sahara connection failed
I have also tried the ALL IN ONE TOOL to do the recovery flasher but bootloader is locked and wont allow it, I have not been able to find away to unlock it as everthing I have found says to unlock via the settings menu which obviously I cant get to as the phone wont boot
I was hoping just to extract some data from it at first but that is starting to look like it is not possible
if anyone has any tips that could help me out I would really appreciate it
Cheers
Click to expand...
Click to collapse
Maybe help
[OP8][OOS 21AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
joke19 said:
Maybe help
[OP8][OOS 21AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
Click to expand...
Click to collapse
I have tried following that same procedure and cant get passed the Sahara communication failed error, tried different PC's with different USB ports and cables, also tried different versions of the MSMDownloadTool all with same error
plnewton said:
I have tried following that same procedure and cant get passed the Sahara communication failed error, tried different PC's with different USB ports and cables, also tried different versions of the MSMDownloadTool all with same error
Click to expand...
Click to collapse
Maybe here you find help
OnePlus 5
The OnePlus 5 is one of the most anticipated phones of 2017. The 5.5" AMOLED display has a 1920x1080p resolution. The Snapdragon 835 chipset is paired with options for either 6 or 8GB of RAM. Storage comes in 64 and 128GB options.The main camera on the OP5 has a dual lens setup with 20+16MP...
forum.xda-developers.com